Almost workign

.gitignore

@@ -1,2 +1,4 @@
 *~
 *.sw[op]
+@
+.idea

conf/php-fpm.conf

@@ -1,430 +0,0 @@
-; Start a new pool named 'www'.
-; the variable $pool can be used in any directive and will be replaced by the
-; pool name ('www' here)
-[__NAMETOCHANGE__]
-
-; Per pool prefix
-; It only applies on the following directives:
-; - 'access.log'
-; - 'slowlog'
-; - 'listen' (unixsocket)
-; - 'chroot'
-; - 'chdir'
-; - 'php_values'
-; - 'php_admin_values'
-; When not set, the global prefix (or /usr) applies instead.
-; Note: This directive can also be relative to the global prefix.
-; Default Value: none
-;prefix = /path/to/pools/$pool
-
-; Unix user/group of processes
-; Note: The user is mandatory. If the group is not set, the default user's group
-;       will be used.
-user = __USER__
-group = __USER__
-
-; The address on which to accept FastCGI requests.
-; Valid syntaxes are:
-;   'ip.add.re.ss:port'    - to listen on a TCP socket to a specific IPv4 address on
-;                            a specific port;
-;   '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on
-;                            a specific port;
-;   'port'                 - to listen on a TCP socket to all addresses
-;                            (IPv6 and IPv4-mapped) on a specific port;
-;   '/path/to/unix/socket' - to listen on a unix socket.
-; Note: This value is mandatory.
-listen = /var/run/php/php__PHPVERSION__-fpm-__NAMETOCHANGE__.sock
-
-; Set listen(2) backlog.
-; Default Value: 511 (-1 on FreeBSD and OpenBSD)
-;listen.backlog = 511
-
-; Set permissions for unix socket, if one is used. In Linux, read/write
-; permissions must be set in order to allow connections from a web server. Many
-; BSD-derived systems allow connections regardless of permissions.
-; Default Values: user and group are set as the running user
-;                 mode is set to 0660
-listen.owner = www-data
-listen.group = www-data
-;listen.mode = 0660
-; When POSIX Access Control Lists are supported you can set them using
-; these options, value is a comma separated list of user/group names.
-; When set, listen.owner and listen.group are ignored
-;listen.acl_users =
-;listen.acl_groups =
-
-; List of addresses (IPv4/IPv6) of FastCGI clients which are allowed to connect.
-; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
-; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
-; must be separated by a comma. If this value is left blank, connections will be
-; accepted from any ip address.
-; Default Value: any
-;listen.allowed_clients = 127.0.0.1
-
-; Specify the nice(2) priority to apply to the pool processes (only if set)
-; The value can vary from -19 (highest priority) to 20 (lower priority)
-; Note: - It will only work if the FPM master process is launched as root
-;       - The pool processes will inherit the master process priority
-;         unless it specified otherwise
-; Default Value: no set
-; process.priority = -19
-
-; Set the process dumpable flag (PR_SET_DUMPABLE prctl) even if the process user
-; or group is differrent than the master process user. It allows to create process
-; core dump and ptrace the process for the pool user.
-; Default Value: no
-; process.dumpable = yes
-
-; Choose how the process manager will control the number of child processes.
-; Possible Values:
-;   static  - a fixed number (pm.max_children) of child processes;
-;   dynamic - the number of child processes are set dynamically based on the
-;             following directives. With this process management, there will be
-;             always at least 1 children.
-;             pm.max_children      - the maximum number of children that can
-;                                    be alive at the same time.
-;             pm.start_servers     - the number of children created on startup.
-;             pm.min_spare_servers - the minimum number of children in 'idle'
-;                                    state (waiting to process). If the number
-;                                    of 'idle' processes is less than this
-;                                    number then some children will be created.
-;             pm.max_spare_servers - the maximum number of children in 'idle'
-;                                    state (waiting to process). If the number
-;                                    of 'idle' processes is greater than this
-;                                    number then some children will be killed.
-;  ondemand - no children are created at startup. Children will be forked when
-;             new requests will connect. The following parameter are used:
-;             pm.max_children           - the maximum number of children that
-;                                         can be alive at the same time.
-;             pm.process_idle_timeout   - The number of seconds after which
-;                                         an idle process will be killed.
-; Note: This value is mandatory.
-pm = dynamic
-
-; The number of child processes to be created when pm is set to 'static' and the
-; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.
-; This value sets the limit on the number of simultaneous requests that will be
-; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
-; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
-; CGI. The below defaults are based on a server without much resources. Don't
-; forget to tweak pm.* to fit your needs.
-; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
-; Note: This value is mandatory.
-pm.max_children = 5
-
-; The number of child processes created on startup.
-; Note: Used only when pm is set to 'dynamic'
-; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
-pm.start_servers = 2
-
-; The desired minimum number of idle server processes.
-; Note: Used only when pm is set to 'dynamic'
-; Note: Mandatory when pm is set to 'dynamic'
-pm.min_spare_servers = 1
-
-; The desired maximum number of idle server processes.
-; Note: Used only when pm is set to 'dynamic'
-; Note: Mandatory when pm is set to 'dynamic'
-pm.max_spare_servers = 3
-
-; The number of seconds after which an idle process will be killed.
-; Note: Used only when pm is set to 'ondemand'
-; Default Value: 10s
-;pm.process_idle_timeout = 10s;
-
-; The number of requests each child process should execute before respawning.
-; This can be useful to work around memory leaks in 3rd party libraries. For
-; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
-; Default Value: 0
-;pm.max_requests = 500
-
-; The URI to view the FPM status page. If this value is not set, no URI will be
-; recognized as a status page. It shows the following informations:
-;   pool                 - the name of the pool;
-;   process manager      - static, dynamic or ondemand;
-;   start time           - the date and time FPM has started;
-;   start since          - number of seconds since FPM has started;
-;   accepted conn        - the number of request accepted by the pool;
-;   listen queue         - the number of request in the queue of pending
-;                          connections (see backlog in listen(2));
-;   max listen queue     - the maximum number of requests in the queue
-;                          of pending connections since FPM has started;
-;   listen queue len     - the size of the socket queue of pending connections;
-;   idle processes       - the number of idle processes;
-;   active processes     - the number of active processes;
-;   total processes      - the number of idle + active processes;
-;   max active processes - the maximum number of active processes since FPM
-;                          has started;
-;   max children reached - number of times, the process limit has been reached,
-;                          when pm tries to start more children (works only for
-;                          pm 'dynamic' and 'ondemand');
-; Value are updated in real time.
-; Example output:
-;   pool:                 www
-;   process manager:      static
-;   start time:           01/Jul/2011:17:53:49 +0200
-;   start since:          62636
-;   accepted conn:        190460
-;   listen queue:         0
-;   max listen queue:     1
-;   listen queue len:     42
-;   idle processes:       4
-;   active processes:     11
-;   total processes:      15
-;   max active processes: 12
-;   max children reached: 0
-;
-; By default the status page output is formatted as text/plain. Passing either
-; 'html', 'xml' or 'json' in the query string will return the corresponding
-; output syntax. Example:
-;   http://www.foo.bar/status
-;   http://www.foo.bar/status?json
-;   http://www.foo.bar/status?html
-;   http://www.foo.bar/status?xml
-;
-; By default the status page only outputs short status. Passing 'full' in the
-; query string will also return status for each pool process.
-; Example:
-;   http://www.foo.bar/status?full
-;   http://www.foo.bar/status?json&full
-;   http://www.foo.bar/status?html&full
-;   http://www.foo.bar/status?xml&full
-; The Full status returns for each process:
-;   pid                  - the PID of the process;
-;   state                - the state of the process (Idle, Running, ...);
-;   start time           - the date and time the process has started;
-;   start since          - the number of seconds since the process has started;
-;   requests             - the number of requests the process has served;
-;   request duration     - the duration in µs of the requests;
-;   request method       - the request method (GET, POST, ...);
-;   request URI          - the request URI with the query string;
-;   content length       - the content length of the request (only with POST);
-;   user                 - the user (PHP_AUTH_USER) (or '-' if not set);
-;   script               - the main script called (or '-' if not set);
-;   last request cpu     - the %cpu the last request consumed
-;                          it's always 0 if the process is not in Idle state
-;                          because CPU calculation is done when the request
-;                          processing has terminated;
-;   last request memory  - the max amount of memory the last request consumed
-;                          it's always 0 if the process is not in Idle state
-;                          because memory calculation is done when the request
-;                          processing has terminated;
-; If the process is in Idle state, then informations are related to the
-; last request the process has served. Otherwise informations are related to
-; the current request being served.
-; Example output:
-;   ************************
-;   pid:                  31330
-;   state:                Running
-;   start time:           01/Jul/2011:17:53:49 +0200
-;   start since:          63087
-;   requests:             12808
-;   request duration:     1250261
-;   request method:       GET
-;   request URI:          /test_mem.php?N=10000
-;   content length:       0
-;   user:                 -
-;   script:               /home/fat/web/docs/php/test_mem.php
-;   last request cpu:     0.00
-;   last request memory:  0
-;
-; Note: There is a real-time FPM status monitoring sample web page available
-;       It's available in: /usr/share/php/7.0/fpm/status.html
-;
-; Note: The value must start with a leading slash (/). The value can be
-;       anything, but it may not be a good idea to use the .php extension or it
-;       may conflict with a real PHP file.
-; Default Value: not set
-;pm.status_path = /status
-
-; The ping URI to call the monitoring page of FPM. If this value is not set, no
-; URI will be recognized as a ping page. This could be used to test from outside
-; that FPM is alive and responding, or to
-; - create a graph of FPM availability (rrd or such);
-; - remove a server from a group if it is not responding (load balancing);
-; - trigger alerts for the operating team (24/7).
-; Note: The value must start with a leading slash (/). The value can be
-;       anything, but it may not be a good idea to use the .php extension or it
-;       may conflict with a real PHP file.
-; Default Value: not set
-;ping.path = /ping
-
-; This directive may be used to customize the response of a ping request. The
-; response is formatted as text/plain with a 200 response code.
-; Default Value: pong
-;ping.response = pong
-
-; The access log file
-; Default: not set
-;access.log = log/$pool.access.log
-
-; The access log format.
-; The following syntax is allowed
-;  %%: the '%' character
-;  %C: %CPU used by the request
-;      it can accept the following format:
-;      - %{user}C for user CPU only
-;      - %{system}C for system CPU only
-;      - %{total}C  for user + system CPU (default)
-;  %d: time taken to serve the request
-;      it can accept the following format:
-;      - %{seconds}d (default)
-;      - %{miliseconds}d
-;      - %{mili}d
-;      - %{microseconds}d
-;      - %{micro}d
-;  %e: an environment variable (same as $_ENV or $_SERVER)
-;      it must be associated with embraces to specify the name of the env
-;      variable. Some exemples:
-;      - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e
-;      - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e
-;  %f: script filename
-;  %l: content-length of the request (for POST request only)
-;  %m: request method
-;  %M: peak of memory allocated by PHP
-;      it can accept the following format:
-;      - %{bytes}M (default)
-;      - %{kilobytes}M
-;      - %{kilo}M
-;      - %{megabytes}M
-;      - %{mega}M
-;  %n: pool name
-;  %o: output header
-;      it must be associated with embraces to specify the name of the header:
-;      - %{Content-Type}o
-;      - %{X-Powered-By}o
-;      - %{Transfert-Encoding}o
-;      - ....
-;  %p: PID of the child that serviced the request
-;  %P: PID of the parent of the child that serviced the request
-;  %q: the query string
-;  %Q: the '?' character if query string exists
-;  %r: the request URI (without the query string, see %q and %Q)
-;  %R: remote IP address
-;  %s: status (response code)
-;  %t: server time the request was received
-;      it can accept a strftime(3) format:
-;      %d/%b/%Y:%H:%M:%S %z (default)
-;      The strftime(3) format must be encapsuled in a %{<strftime_format>}t tag
-;      e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t
-;  %T: time the log has been written (the request has finished)
-;      it can accept a strftime(3) format:
-;      %d/%b/%Y:%H:%M:%S %z (default)
-;      The strftime(3) format must be encapsuled in a %{<strftime_format>}t tag
-;      e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t
-;  %u: remote user
-;
-; Default: "%R - %u %t \"%m %r\" %s"
-;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%"
-
-; The log file for slow requests
-; Default Value: not set
-; Note: slowlog is mandatory if request_slowlog_timeout is set
-;slowlog = log/$pool.log.slow
-
-; The timeout for serving a single request after which a PHP backtrace will be
-; dumped to the 'slowlog' file. A value of '0s' means 'off'.
-; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
-; Default Value: 0
-;request_slowlog_timeout = 0
-
-; The timeout for serving a single request after which the worker process will
-; be killed. This option should be used when the 'max_execution_time' ini option
-; does not stop script execution for some reason. A value of '0' means 'off'.
-; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
-; Default Value: 0
-request_terminate_timeout = 1d
-
-; Set open file descriptor rlimit.
-; Default Value: system defined value
-;rlimit_files = 1024
-
-; Set max core size rlimit.
-; Possible Values: 'unlimited' or an integer greater or equal to 0
-; Default Value: system defined value
-;rlimit_core = 0
-
-; Chroot to this directory at the start. This value must be defined as an
-; absolute path. When this value is not set, chroot is not used.
-; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
-; of its subdirectories. If the pool prefix is not set, the global prefix
-; will be used instead.
-; Note: chrooting is a great security feature and should be used whenever
-;       possible. However, all PHP paths will be relative to the chroot
-;       (error_log, sessions.save_path, ...).
-; Default Value: not set
-;chroot =
-
-; Chdir to this directory at the start.
-; Note: relative path can be used.
-; Default Value: current directory or / when chroot
-chdir = __FINALPATH__
-
-; Redirect worker stdout and stderr into main error log. If not set, stdout and
-; stderr will be redirected to /dev/null according to FastCGI specs.
-; Note: on highloaded environement, this can cause some delay in the page
-; process time (several ms).
-; Default Value: no
-;catch_workers_output = yes
-
-; Clear environment in FPM workers
-; Prevents arbitrary environment variables from reaching FPM worker processes
-; by clearing the environment in workers before env vars specified in this
-; pool configuration are added.
-; Setting to "no" will make all environment variables available to PHP code
-; via getenv(), $_ENV and $_SERVER.
-; Default Value: yes
-;clear_env = no
-
-; Limits the extensions of the main script FPM will allow to parse. This can
-; prevent configuration mistakes on the web server side. You should only limit
-; FPM to .php extensions to prevent malicious users to use other extensions to
-; execute php code.
-; Note: set an empty value to allow all extensions.
-; Default Value: .php
-;security.limit_extensions = .php .php3 .php4 .php5 .php7
-
-; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
-; the current environment.
-; Default Value: clean env
-;env[HOSTNAME] = $HOSTNAME
-;env[PATH] = /usr/local/bin:/usr/bin:/bin
-;env[TMP] = /tmp
-;env[TMPDIR] = /tmp
-;env[TEMP] = /tmp
-
-; Additional php.ini defines, specific to this pool of workers. These settings
-; overwrite the values previously defined in the php.ini. The directives are the
-; same as the PHP SAPI:
-;   php_value/php_flag             - you can set classic ini defines which can
-;                                    be overwritten from PHP call 'ini_set'.
-;   php_admin_value/php_admin_flag - these directives won't be overwritten by
-;                                     PHP call 'ini_set'
-; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
-
-; Defining 'extension' will load the corresponding shared extension from
-; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
-; overwrite previously defined php.ini values, but will append the new value
-; instead.
-
-; Note: path INI options can be relative and will be expanded with the prefix
-; (pool, global or /usr)
-
-; Default Value: nothing is defined by default except the values in php.ini and
-;                specified at startup with the -d argument
-;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com
-;php_flag[display_errors] = off
-;php_admin_value[error_log] = /var/log/fpm-php.www.log
-;php_admin_flag[log_errors] = on
-;php_admin_value[memory_limit] = 32M
-
-; Common values to change to increase file upload limit
-; php_admin_value[upload_max_filesize] = 50M
-; php_admin_value[post_max_size] = 50M
-; php_admin_flag[mail.add_x_header] = Off
-
-; Other common parameters
-; php_admin_value[max_execution_time] = 600
-; php_admin_value[max_input_time] = 300
-; php_admin_value[memory_limit] = 256M
-; php_admin_flag[short_open_tag] = On

conf/requirements.txt

@@ -0,0 +1 @@
+archivebox==0.6.2;

conf/start.sh

@@ -0,0 +1,3 @@
+#!/usr/bin/env bash
+/var/www/example/venv/bin/activate
+archivebox server

conf/systemd.service

@@ -1,18 +1,18 @@
 [Unit]
-Description=Small description of the service
+Description=Archivebox server
 After=network.target
 
 [Service]
 Type=simple
 User=__APP__
 Group=__APP__
-WorkingDirectory=__FINALPATH__/
-ExecStart=__FINALPATH__/script
+WorkingDirectory=__DATADIR__/
+ExecStart=__FINALPATH__/start.sh
 StandardOutput=append:/var/log/__APP__/__APP__.log
 StandardError=inherit
 
 # Sandboxing options to harden security
-# Depending on specificities of your service/app, you may need to tweak these 
+# Depending on specificities of your service/app, you may need to tweak these
 # .. but this should be a good baseline
 # Details for these options: https://www.freedesktop.org/software/systemd/man/systemd.exec.html
 NoNewPrivileges=yes
@@ -39,7 +39,7 @@ CapabilityBoundingSet=~CAP_BLOCK_SUSPEND CAP_WAKE_ALARM
 CapabilityBoundingSet=~CAP_SYS_TTY_CONFIG
 CapabilityBoundingSet=~CAP_MAC_ADMIN CAP_MAC_OVERRIDE
 CapabilityBoundingSet=~CAP_NET_ADMIN CAP_NET_BROADCAST CAP_NET_RAW
-CapabilityBoundingSet=~CAP_SYS_ADMIN CAP_SYS_PTRACE CAP_SYSLOG 
+CapabilityBoundingSet=~CAP_SYS_ADMIN CAP_SYS_PTRACE CAP_SYSLOG
 
 [Install]
 WantedBy=multi-user.target

manifest.json

@@ -1,34 +1,32 @@
 {
-    "name": "Example app",
+    "name": "ArchiveBox",
     "id": "example",
     "packaging_format": 1,
     "description": {
-        "en": "Explain in *a few (10~15) words* the purpose of the app or what it actually does (it is meant to give a rough idea to users browsing a catalog of 100+ apps)",
-        "fr": "Expliquez en *quelques* (10~15) mots l'utilité de l'app ou ce qu'elle fait (l'objectif est de donner une idée grossière pour des utilisateurs qui naviguent dans un catalogue de 100+ apps)"
+        "en": "ArchiveBox is a powerful, self-hosted internet archiving solution to collect, save, and view sites you want to preserve offline.",
+        "fr": ""
     },
     "version": "1.0~ynh1",
-    "url": "https://example.com",
+    "url": "https://archivebox.io/",
     "upstream": {
-        "license": "free",
-        "website": "https://example.com",
-        "demo": "https://demo.example.com",
+        "license": "MIT",
+        "website": "https://archivebox.io/",
+        "demo": "https://archivebox.io/",
         "admindoc": "https://yunohost.org/packaging_apps",
         "userdoc": "https://yunohost.org/apps",
-        "code": "https://some.forge.com/example/example"
+        "code": "https://github.com/ArchiveBox/ArchiveBox"
     },
-    "license": "free",
+    "license": "MIT",
     "maintainer": {
-        "name": "John doe",
-        "email": "john.doe@example.com"
+        "name": "Max Fowler",
+        "email": "max@mfowler.info"
     },
     "requirements": {
         "yunohost": ">= 4.1.3"
     },
     "multi_instance": true,
     "services": [
-        "nginx",
-        "php7.3-fpm",
-        "mysql"
+        "nginx"
     ],
     "arguments": {
         "install" : [

scripts/_common.sh

@@ -5,7 +5,7 @@
 #=================================================
 
 # dependencies used by the app
-pkg_dependencies="deb1 deb2 php$YNH_DEFAULT_PHP_VERSION-deb1 php$YNH_DEFAULT_PHP_VERSION-deb2"
+pkg_dependencies="python3-venv"
 
 #=================================================
 # PERSONAL HELPERS

scripts/install

@@ -43,6 +43,8 @@ password=$YNH_APP_ARG_PASSWORD
 ### db names...
 app=$YNH_APP_INSTANCE_NAME
 
+ynh_script_progression --message="INFO: $YNH_STDINFO" --time --weight=1
+
 #=================================================
 # CHECK IF THE APP CAN BE INSTALLED WITH THESE ARGS
 #=================================================
@@ -95,8 +97,8 @@ ynh_app_setting_set --app=$app --key=port --value=$port
 # If you do this and the app doesn't actually need you are CREATING SECURITY HOLES IN THE SERVER !)
 
 # Open the port
-# ynh_script_progression --message="Configuring firewall..." --time --weight=1
-# ynh_exec_warn_less yunohost firewall allow --no-upnp TCP $port
+ynh_script_progression --message="Configuring firewall..." --time --weight=1
+ynh_exec_warn_less yunohost firewall allow --no-upnp TCP $port
 
 #=================================================
 # INSTALL DEPENDENCIES
@@ -121,10 +123,11 @@ ynh_script_progression --message="Configuring system user..." --time --weight=1
 # Create a system user
 ynh_system_user_create --username=$app --home_dir="$final_path"
 
+# TODO: remove mysql section
 #=================================================
 # CREATE A MYSQL DATABASE
 #=================================================
-ynh_script_progression --message="Creating a MySQL database..." --time --weight=1
+#ynh_script_progression --message="Creating a MySQL database..." --time --weight=1
 
 ### Use these lines if you need a database for the application.
 ### `ynh_mysql_setup_db` will create a database, an associated user and a ramdom password.
@@ -135,10 +138,10 @@ ynh_script_progression --message="Creating a MySQL database..." --time --weight=
 ###		- Remove also the section "REMOVE THE MYSQL DATABASE" in the remove script
 ###		- As well as the section "RESTORE THE MYSQL DATABASE" in the restore script
 
-db_name=$(ynh_sanitize_dbid --db_name=$app)
-db_user=$db_name
-ynh_app_setting_set --app=$app --key=db_name --value=$db_name
-ynh_mysql_setup_db --db_user=$db_user --db_name=$db_name
+#db_name=$(ynh_sanitize_dbid --db_name=$app)
+#db_user=$db_name
+#ynh_app_setting_set --app=$app --key=db_name --value=$db_name
+#ynh_mysql_setup_db --db_user=$db_user --db_name=$db_name
 
 #=================================================
 # DOWNLOAD, CHECK AND UNPACK SOURCE
@@ -151,7 +154,8 @@ ynh_script_progression --message="Setting up source files..." --time --weight=1
 
 ynh_app_setting_set --app=$app --key=final_path --value=$final_path
 # Download, check integrity, uncompress and patch the source from app.src
-ynh_setup_source --dest_dir="$final_path"
+#ynh_setup_source --dest_dir="$final_path"
+mkdir -p $final_path
 
 # FIXME: this should be managed by the core in the future
 # Here, as a packager, you may have to tweak the ownerhsip/permissions
@@ -173,38 +177,40 @@ ynh_script_progression --message="Configuring NGINX web server..." --time --weig
 # Create a dedicated NGINX config
 ynh_add_nginx_config
 
-#=================================================
-# PHP-FPM CONFIGURATION
-#=================================================
-ynh_script_progression --message="Configuring PHP-FPM..." --time --weight=1
-
-### `ynh_add_fpm_config` is used to set up a PHP config.
-### You can remove it if your app doesn't use PHP.
-### `ynh_add_fpm_config` will use the files conf/php-fpm.conf
-### If you're not using these lines:
-###		- You can remove these files in conf/.
-###		- Remove the section "BACKUP THE PHP-FPM CONFIGURATION" in the backup script
-###		- Remove also the section "REMOVE PHP-FPM CONFIGURATION" in the remove script
-###		- As well as the section "RESTORE THE PHP-FPM CONFIGURATION" in the restore script
-###		  with the reload at the end of the script.
-###		- And the section "PHP-FPM CONFIGURATION" in the upgrade script
-
-# Create a dedicated PHP-FPM config
-ynh_add_fpm_config
-
 #=================================================
 # SPECIFIC SETUP
 #=================================================
 # ...
 #=================================================
 
+#=================================================
+# PIP INSTALLATION
+#=================================================
+ynh_script_progression --message="Install project via pip..." --weight=80
+
+python3 -m venv "${final_path}/venv"
+cp ../conf/requirements.txt "$final_path/requirements.txt"
+cp ../conf/start.sh "$final_path/start.sh"
+chmod 760 "$final_path/start.sh"
+chown -R "$app" "$final_path"
+
+#run source in a 'sub shell'
+(
+	set +o nounset
+	source "${final_path}/venv/bin/activate"
+	set -o nounset
+	ynh_exec_as $app $final_path/venv/bin/pip install --upgrade pip
+	ynh_exec_as $app $final_path/venv/bin/pip install -r "$final_path/requirements.txt"
+#	ynh_exec_as $app $final_path/venv/bin/pip install --upgrade "$pip_install_string"
+)
+
 #=================================================
 # CREATE DATA DIRECTORY
 #=================================================
 ynh_script_progression --message="Creating a data directory..." --time --weight=1
 
 ### Use these lines if you need to create a directory to store "persistent files" for the application.
-### Usually this directory is used to store uploaded files or any file that won't be updated during 
+### Usually this directory is used to store uploaded files or any file that won't be updated during
 ### an upgrade and that won't be deleted during app removal
 ### If you're not using these lines:
 ###		- Remove the section "BACKUP THE DATA DIR" in the backup script
@@ -225,6 +231,13 @@ chmod 750 "$datadir"
 chmod -R o-rwx "$datadir"
 chown -R $app:www-data "$datadir"
 
+
+#=================================================
+# INITIALIZE ARCHIVEBOX
+#=================================================
+#cd $datadir && ynh_exec_as $app archivebox manage createsuperuser --noinput --username archivebox2 --email max@mfowler.info
+cd $datadir && ynh_exec_as $app archivebox init --setup
+
 #=================================================
 # ADD A CONFIGURATION
 #=================================================
@@ -241,14 +254,14 @@ ynh_script_progression --message="Adding a configuration file..." --time --weigh
 ### if it's found that the file was manually modified
 ###
 ### Check the documentation of `ynh_add_config` for more info.
-
-ynh_add_config --template="some_config_file" --destination="$final_path/some_config_file"
+# TODO: add config
+#ynh_add_config --template="some_config_file" --destination="$final_path/some_config_file"
 
 # FIXME: this should be handled by the core in the future
 # You may need to use chmod 600 instead of 400,
 # for example if the app is expected to be able to modify its own config
-chmod 400 "$final_path/some_config_file"
-chown $app:$app "$final_path/some_config_file"
+#chmod 400 "$final_path/some_config_file"
+#chown $app:$app "$final_path/some_config_file"
 
 ### For more complex cases where you want to replace stuff using regexes,
 ### you shoud rely on ynh_replace_string (which is basically a wrapper for sed)
@@ -276,26 +289,26 @@ ynh_script_progression --message="Configuring a systemd service..." --time --wei
 # Create a dedicated systemd config
 ynh_add_systemd_config
 
-#=================================================
-# SETUP APPLICATION WITH CURL
-#=================================================
-
-### Use these lines only if the app installation needs to be finalized through
-### web forms. We generally don't want to ask the final user,
-### so we're going to use curl to automatically fill the fields and submit the
-### forms.
-
-# Set the app as temporarily public for curl call
-ynh_script_progression --message="Configuring SSOwat..." --time --weight=1
-# Making the app public for curl
-ynh_permission_update --permission="main" --add="visitors"
-
-# Installation with curl
-ynh_script_progression --message="Finalizing installation..." --time --weight=1
-ynh_local_curl "/INSTALL_PATH" "key1=value1" "key2=value2" "key3=value3"
-
-# Remove the public access
-ynh_permission_update --permission="main" --remove="visitors"
+##=================================================
+## SETUP APPLICATION WITH CURL
+##=================================================
+#
+#### Use these lines only if the app installation needs to be finalized through
+#### web forms. We generally don't want to ask the final user,
+#### so we're going to use curl to automatically fill the fields and submit the
+#### forms.
+#
+## Set the app as temporarily public for curl call
+#ynh_script_progression --message="Configuring SSOwat..." --time --weight=1
+## Making the app public for curl
+#ynh_permission_update --permission="main" --add="visitors"
+#
+## Installation with curl
+#ynh_script_progression --message="Finalizing installation..." --time --weight=1
+#ynh_local_curl "/INSTALL_PATH" "key1=value1" "key2=value2" "key3=value3"
+#
+## Remove the public access
+#ynh_permission_update --permission="main" --remove="visitors"
 
 #=================================================
 # GENERIC FINALIZATION
@@ -329,7 +342,7 @@ ynh_script_progression --message="Integrating service in YunoHost..." --time --w
 ###		- As well as the section "INTEGRATE SERVICE IN YUNOHOST" in the restore script
 ###		- And the section "INTEGRATE SERVICE IN YUNOHOST" in the upgrade script
 
-yunohost service add $app --description="A short description of the app" --log="/var/log/$app/$app.log"
+yunohost service add $app --description="Self-hosted internet archiving" --log="/var/log/$app/$app.log"
 
 ### Additional options starting with 3.8:
 ###
@@ -366,10 +379,10 @@ ynh_systemd_action --service_name=$app --action="start" --log_path="/var/log/$ap
 #=================================================
 # SETUP FAIL2BAN
 #=================================================
-ynh_script_progression --message="Configuring Fail2Ban..." --time --weight=1
-
+# TODO: what is this
+#ynh_script_progression --message="Configuring Fail2Ban..." --time --weight=1
 # Create a dedicated Fail2Ban config
-ynh_add_fail2ban_config --logpath="/var/log/nginx/${domain}-error.log" --failregex="Regex to match into the log for a failed login"
+#ynh_add_fail2ban_config --logpath="/var/log/nginx/${domain}-error.log" --failregex="Regex to match into the log for a failed login"
 
 #=================================================
 # SETUP SSOWAT
@@ -384,17 +397,6 @@ then
 	ynh_permission_update --permission="main" --add="visitors"
 fi
 
-### N.B. : the following extra permissions only make sense if your app
-### does have for example an admin interface or an api.
-
-# Only the admin can access the admin panel of the app (if the app has an admin panel)
-ynh_permission_create --permission="admin" --url="/admin" --allowed=$admin
-
-# Everyone can access to the api part
-# We don't want to display the tile in the sso so we put --show_tile="false"
-# And we don't want that the YunoHost Admin can remove visitors group to this permission, so we put --protected="true"
-ynh_permission_create --permission="api" --url="/api" --allowed="visitors" --show_tile="false" --protected="true"
-
 #=================================================
 # RELOAD NGINX
 #=================================================

scripts/remove

@@ -43,14 +43,6 @@ ynh_script_progression --message="Stopping and removing the systemd service..."
 # Remove the dedicated systemd config
 ynh_remove_systemd_config
 
-#=================================================
-# REMOVE THE MYSQL DATABASE
-#=================================================
-ynh_script_progression --message="Removing the MySQL database..." --time --weight=1
-
-# Remove a database if it exists, along with the associated user
-ynh_mysql_remove_db --db_user=$db_user --db_name=$db_name
-
 #=================================================
 # REMOVE DEPENDENCIES
 #=================================================
@@ -75,14 +67,6 @@ ynh_script_progression --message="Removing NGINX web server configuration..." --
 # Remove the dedicated NGINX config
 ynh_remove_nginx_config
 
-#=================================================
-# REMOVE PHP-FPM CONFIGURATION
-#=================================================
-ynh_script_progression --message="Removing PHP-FPM configuration..." --time --weight=1
-
-# Remove the dedicated PHP-FPM config
-ynh_remove_fpm_config
-
 #=================================================
 # REMOVE LOGROTATE CONFIGURATION
 #=================================================