diff --git a/check_process b/check_process index 089936a..ef6642a 100644 --- a/check_process +++ b/check_process @@ -11,10 +11,10 @@ port="9980" (PORT) ; Checks pkg_linter=1 - setup_sub_dir=0 + setup_sub_dir=1 setup_root=1 setup_nourl=0 - setup_private=0 + setup_private=1 setup_public=1 upgrade=1 backup_restore=1 diff --git a/conf/php-fpm.conf b/conf/php-fpm.conf new file mode 100644 index 0000000..ab1a471 --- /dev/null +++ b/conf/php-fpm.conf @@ -0,0 +1,430 @@ +; Start a new pool named 'www'. +; the variable $pool can be used in any directive and will be replaced by the +; pool name ('www' here) +[__NAMETOCHANGE__] + +; Per pool prefix +; It only applies on the following directives: +; - 'access.log' +; - 'slowlog' +; - 'listen' (unixsocket) +; - 'chroot' +; - 'chdir' +; - 'php_values' +; - 'php_admin_values' +; When not set, the global prefix (or /usr) applies instead. +; Note: This directive can also be relative to the global prefix. +; Default Value: none +;prefix = /path/to/pools/$pool + +; Unix user/group of processes +; Note: The user is mandatory. If the group is not set, the default user's group +; will be used. +user = __USER__ +group = __USER__ + +; The address on which to accept FastCGI requests. +; Valid syntaxes are: +; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific IPv4 address on +; a specific port; +; '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on +; a specific port; +; 'port' - to listen on a TCP socket to all addresses +; (IPv6 and IPv4-mapped) on a specific port; +; '/path/to/unix/socket' - to listen on a unix socket. +; Note: This value is mandatory. +listen = /var/run/php/php__PHPVERSION__-fpm-__NAMETOCHANGE__.sock + +; Set listen(2) backlog. +; Default Value: 511 (-1 on FreeBSD and OpenBSD) +;listen.backlog = 511 + +; Set permissions for unix socket, if one is used. In Linux, read/write +; permissions must be set in order to allow connections from a web server. Many +; BSD-derived systems allow connections regardless of permissions. +; Default Values: user and group are set as the running user +; mode is set to 0660 +listen.owner = www-data +listen.group = www-data +;listen.mode = 0660 +; When POSIX Access Control Lists are supported you can set them using +; these options, value is a comma separated list of user/group names. +; When set, listen.owner and listen.group are ignored +;listen.acl_users = +;listen.acl_groups = + +; List of addresses (IPv4/IPv6) of FastCGI clients which are allowed to connect. +; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original +; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address +; must be separated by a comma. If this value is left blank, connections will be +; accepted from any ip address. +; Default Value: any +;listen.allowed_clients = 127.0.0.1 + +; Specify the nice(2) priority to apply to the pool processes (only if set) +; The value can vary from -19 (highest priority) to 20 (lower priority) +; Note: - It will only work if the FPM master process is launched as root +; - The pool processes will inherit the master process priority +; unless it specified otherwise +; Default Value: no set +; process.priority = -19 + +; Set the process dumpable flag (PR_SET_DUMPABLE prctl) even if the process user +; or group is differrent than the master process user. It allows to create process +; core dump and ptrace the process for the pool user. +; Default Value: no +; process.dumpable = yes + +; Choose how the process manager will control the number of child processes. +; Possible Values: +; static - a fixed number (pm.max_children) of child processes; +; dynamic - the number of child processes are set dynamically based on the +; following directives. With this process management, there will be +; always at least 1 children. +; pm.max_children - the maximum number of children that can +; be alive at the same time. +; pm.start_servers - the number of children created on startup. +; pm.min_spare_servers - the minimum number of children in 'idle' +; state (waiting to process). If the number +; of 'idle' processes is less than this +; number then some children will be created. +; pm.max_spare_servers - the maximum number of children in 'idle' +; state (waiting to process). If the number +; of 'idle' processes is greater than this +; number then some children will be killed. +; ondemand - no children are created at startup. Children will be forked when +; new requests will connect. The following parameter are used: +; pm.max_children - the maximum number of children that +; can be alive at the same time. +; pm.process_idle_timeout - The number of seconds after which +; an idle process will be killed. +; Note: This value is mandatory. +pm = dynamic + +; The number of child processes to be created when pm is set to 'static' and the +; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'. +; This value sets the limit on the number of simultaneous requests that will be +; served. Equivalent to the ApacheMaxClients directive with mpm_prefork. +; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP +; CGI. The below defaults are based on a server without much resources. Don't +; forget to tweak pm.* to fit your needs. +; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand' +; Note: This value is mandatory. +pm.max_children = 5 + +; The number of child processes created on startup. +; Note: Used only when pm is set to 'dynamic' +; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2 +pm.start_servers = 2 + +; The desired minimum number of idle server processes. +; Note: Used only when pm is set to 'dynamic' +; Note: Mandatory when pm is set to 'dynamic' +pm.min_spare_servers = 1 + +; The desired maximum number of idle server processes. +; Note: Used only when pm is set to 'dynamic' +; Note: Mandatory when pm is set to 'dynamic' +pm.max_spare_servers = 3 + +; The number of seconds after which an idle process will be killed. +; Note: Used only when pm is set to 'ondemand' +; Default Value: 10s +;pm.process_idle_timeout = 10s; + +; The number of requests each child process should execute before respawning. +; This can be useful to work around memory leaks in 3rd party libraries. For +; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS. +; Default Value: 0 +;pm.max_requests = 500 + +; The URI to view the FPM status page. If this value is not set, no URI will be +; recognized as a status page. It shows the following informations: +; pool - the name of the pool; +; process manager - static, dynamic or ondemand; +; start time - the date and time FPM has started; +; start since - number of seconds since FPM has started; +; accepted conn - the number of request accepted by the pool; +; listen queue - the number of request in the queue of pending +; connections (see backlog in listen(2)); +; max listen queue - the maximum number of requests in the queue +; of pending connections since FPM has started; +; listen queue len - the size of the socket queue of pending connections; +; idle processes - the number of idle processes; +; active processes - the number of active processes; +; total processes - the number of idle + active processes; +; max active processes - the maximum number of active processes since FPM +; has started; +; max children reached - number of times, the process limit has been reached, +; when pm tries to start more children (works only for +; pm 'dynamic' and 'ondemand'); +; Value are updated in real time. +; Example output: +; pool: www +; process manager: static +; start time: 01/Jul/2011:17:53:49 +0200 +; start since: 62636 +; accepted conn: 190460 +; listen queue: 0 +; max listen queue: 1 +; listen queue len: 42 +; idle processes: 4 +; active processes: 11 +; total processes: 15 +; max active processes: 12 +; max children reached: 0 +; +; By default the status page output is formatted as text/plain. Passing either +; 'html', 'xml' or 'json' in the query string will return the corresponding +; output syntax. Example: +; http://www.foo.bar/status +; http://www.foo.bar/status?json +; http://www.foo.bar/status?html +; http://www.foo.bar/status?xml +; +; By default the status page only outputs short status. Passing 'full' in the +; query string will also return status for each pool process. +; Example: +; http://www.foo.bar/status?full +; http://www.foo.bar/status?json&full +; http://www.foo.bar/status?html&full +; http://www.foo.bar/status?xml&full +; The Full status returns for each process: +; pid - the PID of the process; +; state - the state of the process (Idle, Running, ...); +; start time - the date and time the process has started; +; start since - the number of seconds since the process has started; +; requests - the number of requests the process has served; +; request duration - the duration in µs of the requests; +; request method - the request method (GET, POST, ...); +; request URI - the request URI with the query string; +; content length - the content length of the request (only with POST); +; user - the user (PHP_AUTH_USER) (or '-' if not set); +; script - the main script called (or '-' if not set); +; last request cpu - the %cpu the last request consumed +; it's always 0 if the process is not in Idle state +; because CPU calculation is done when the request +; processing has terminated; +; last request memory - the max amount of memory the last request consumed +; it's always 0 if the process is not in Idle state +; because memory calculation is done when the request +; processing has terminated; +; If the process is in Idle state, then informations are related to the +; last request the process has served. Otherwise informations are related to +; the current request being served. +; Example output: +; ************************ +; pid: 31330 +; state: Running +; start time: 01/Jul/2011:17:53:49 +0200 +; start since: 63087 +; requests: 12808 +; request duration: 1250261 +; request method: GET +; request URI: /test_mem.php?N=10000 +; content length: 0 +; user: - +; script: /home/fat/web/docs/php/test_mem.php +; last request cpu: 0.00 +; last request memory: 0 +; +; Note: There is a real-time FPM status monitoring sample web page available +; It's available in: /usr/share/php/7.0/fpm/status.html +; +; Note: The value must start with a leading slash (/). The value can be +; anything, but it may not be a good idea to use the .php extension or it +; may conflict with a real PHP file. +; Default Value: not set +;pm.status_path = /status + +; The ping URI to call the monitoring page of FPM. If this value is not set, no +; URI will be recognized as a ping page. This could be used to test from outside +; that FPM is alive and responding, or to +; - create a graph of FPM availability (rrd or such); +; - remove a server from a group if it is not responding (load balancing); +; - trigger alerts for the operating team (24/7). +; Note: The value must start with a leading slash (/). The value can be +; anything, but it may not be a good idea to use the .php extension or it +; may conflict with a real PHP file. +; Default Value: not set +;ping.path = /ping + +; This directive may be used to customize the response of a ping request. The +; response is formatted as text/plain with a 200 response code. +; Default Value: pong +;ping.response = pong + +; The access log file +; Default: not set +;access.log = log/$pool.access.log + +; The access log format. +; The following syntax is allowed +; %%: the '%' character +; %C: %CPU used by the request +; it can accept the following format: +; - %{user}C for user CPU only +; - %{system}C for system CPU only +; - %{total}C for user + system CPU (default) +; %d: time taken to serve the request +; it can accept the following format: +; - %{seconds}d (default) +; - %{miliseconds}d +; - %{mili}d +; - %{microseconds}d +; - %{micro}d +; %e: an environment variable (same as $_ENV or $_SERVER) +; it must be associated with embraces to specify the name of the env +; variable. Some exemples: +; - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e +; - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e +; %f: script filename +; %l: content-length of the request (for POST request only) +; %m: request method +; %M: peak of memory allocated by PHP +; it can accept the following format: +; - %{bytes}M (default) +; - %{kilobytes}M +; - %{kilo}M +; - %{megabytes}M +; - %{mega}M +; %n: pool name +; %o: output header +; it must be associated with embraces to specify the name of the header: +; - %{Content-Type}o +; - %{X-Powered-By}o +; - %{Transfert-Encoding}o +; - .... +; %p: PID of the child that serviced the request +; %P: PID of the parent of the child that serviced the request +; %q: the query string +; %Q: the '?' character if query string exists +; %r: the request URI (without the query string, see %q and %Q) +; %R: remote IP address +; %s: status (response code) +; %t: server time the request was received +; it can accept a strftime(3) format: +; %d/%b/%Y:%H:%M:%S %z (default) +; The strftime(3) format must be encapsuled in a %{}t tag +; e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t +; %T: time the log has been written (the request has finished) +; it can accept a strftime(3) format: +; %d/%b/%Y:%H:%M:%S %z (default) +; The strftime(3) format must be encapsuled in a %{}t tag +; e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t +; %u: remote user +; +; Default: "%R - %u %t \"%m %r\" %s" +;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%" + +; The log file for slow requests +; Default Value: not set +; Note: slowlog is mandatory if request_slowlog_timeout is set +;slowlog = log/$pool.log.slow + +; The timeout for serving a single request after which a PHP backtrace will be +; dumped to the 'slowlog' file. A value of '0s' means 'off'. +; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) +; Default Value: 0 +;request_slowlog_timeout = 0 + +; The timeout for serving a single request after which the worker process will +; be killed. This option should be used when the 'max_execution_time' ini option +; does not stop script execution for some reason. A value of '0' means 'off'. +; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) +; Default Value: 0 +request_terminate_timeout = 1d + +; Set open file descriptor rlimit. +; Default Value: system defined value +;rlimit_files = 1024 + +; Set max core size rlimit. +; Possible Values: 'unlimited' or an integer greater or equal to 0 +; Default Value: system defined value +;rlimit_core = 0 + +; Chroot to this directory at the start. This value must be defined as an +; absolute path. When this value is not set, chroot is not used. +; Note: you can prefix with '$prefix' to chroot to the pool prefix or one +; of its subdirectories. If the pool prefix is not set, the global prefix +; will be used instead. +; Note: chrooting is a great security feature and should be used whenever +; possible. However, all PHP paths will be relative to the chroot +; (error_log, sessions.save_path, ...). +; Default Value: not set +;chroot = + +; Chdir to this directory at the start. +; Note: relative path can be used. +; Default Value: current directory or / when chroot +chdir = __FINALPATH__ + +; Redirect worker stdout and stderr into main error log. If not set, stdout and +; stderr will be redirected to /dev/null according to FastCGI specs. +; Note: on highloaded environement, this can cause some delay in the page +; process time (several ms). +; Default Value: no +;catch_workers_output = yes + +; Clear environment in FPM workers +; Prevents arbitrary environment variables from reaching FPM worker processes +; by clearing the environment in workers before env vars specified in this +; pool configuration are added. +; Setting to "no" will make all environment variables available to PHP code +; via getenv(), $_ENV and $_SERVER. +; Default Value: yes +;clear_env = no + +; Limits the extensions of the main script FPM will allow to parse. This can +; prevent configuration mistakes on the web server side. You should only limit +; FPM to .php extensions to prevent malicious users to use other extensions to +; execute php code. +; Note: set an empty value to allow all extensions. +; Default Value: .php +;security.limit_extensions = .php .php3 .php4 .php5 .php7 + +; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from +; the current environment. +; Default Value: clean env +;env[HOSTNAME] = $HOSTNAME +;env[PATH] = /usr/local/bin:/usr/bin:/bin +;env[TMP] = /tmp +;env[TMPDIR] = /tmp +;env[TEMP] = /tmp + +; Additional php.ini defines, specific to this pool of workers. These settings +; overwrite the values previously defined in the php.ini. The directives are the +; same as the PHP SAPI: +; php_value/php_flag - you can set classic ini defines which can +; be overwritten from PHP call 'ini_set'. +; php_admin_value/php_admin_flag - these directives won't be overwritten by +; PHP call 'ini_set' +; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no. + +; Defining 'extension' will load the corresponding shared extension from +; extension_dir. Defining 'disable_functions' or 'disable_classes' will not +; overwrite previously defined php.ini values, but will append the new value +; instead. + +; Note: path INI options can be relative and will be expanded with the prefix +; (pool, global or /usr) + +; Default Value: nothing is defined by default except the values in php.ini and +; specified at startup with the -d argument +;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com +;php_flag[display_errors] = off +;php_admin_value[error_log] = /var/log/fpm-php.www.log +;php_admin_flag[log_errors] = on +;php_admin_value[memory_limit] = 32M + +; Common values to change to increase file upload limit +; php_admin_value[upload_max_filesize] = 50M +; php_admin_value[post_max_size] = 50M +; php_admin_flag[mail.add_x_header] = Off + +; Other common parameters +; php_admin_value[max_execution_time] = 600 +; php_admin_value[max_input_time] = 300 +; php_admin_value[memory_limit] = 256M +; php_admin_flag[short_open_tag] = On diff --git a/scripts/change_url b/scripts/change_url new file mode 100644 index 0000000..0288efe --- /dev/null +++ b/scripts/change_url @@ -0,0 +1,112 @@ +#!/bin/bash + +#================================================= +# GENERIC STARTING +#================================================= +# IMPORT GENERIC HELPERS +#================================================= + +source _common.sh +source /usr/share/yunohost/helpers + +#================================================= +# RETRIEVE ARGUMENTS +#================================================= + +old_domain=$YNH_APP_OLD_DOMAIN +old_path=$YNH_APP_OLD_PATH + +new_domain=$YNH_APP_NEW_DOMAIN +new_path=$YNH_APP_NEW_PATH + +app=$YNH_APP_INSTANCE_NAME + +#================================================= +# LOAD SETTINGS +#================================================= +ynh_script_progression --message="Loading installation settings..." --time --weight=1 + +# Needed for helper "ynh_add_nginx_config" +final_path=$(ynh_app_setting_get --app=$app --key=final_path) + +# Add settings here as needed by your application +#db_name=$(ynh_app_setting_get --app=$app --key=db_name) +#db_user=$db_name +#db_pwd=$(ynh_app_setting_get --app=$app --key=db_pwd) + +#================================================= +# BACKUP BEFORE UPGRADE THEN ACTIVE TRAP +#================================================= +ynh_script_progression --message="Backing up the app before changing its URL (may take a while)..." --time --weight=1 + +# Backup the current version of the app +ynh_backup_before_upgrade +ynh_clean_setup () { + # Remove the new domain config file, the remove script won't do it as it doesn't know yet its location. + ynh_secure_remove --file="/etc/nginx/conf.d/$new_domain.d/$app.conf" + + # Restore it if the upgrade fails + ynh_restore_upgradebackup +} +# Exit if an error occurs during the execution of the script +ynh_abort_if_errors + +#================================================= +# CHECK WHICH PARTS SHOULD BE CHANGED +#================================================= + +change_domain=0 +if [ "$old_domain" != "$new_domain" ] +then + change_domain=1 +fi + +change_path=0 +if [ "$old_path" != "$new_path" ] +then + change_path=1 +fi + +#================================================= +# STANDARD MODIFICATIONS +#================================================= +# MODIFY URL IN NGINX CONF +#================================================= +ynh_script_progression --message="Updating NGINX web server configuration..." --time --weight=1 + +nginx_conf_path=/etc/nginx/conf.d/$old_domain.d/$app.conf + +# Change the path in the NGINX config file +if [ $change_path -eq 1 ] +then + # Make a backup of the original NGINX config file if modified + ynh_backup_if_checksum_is_different --file="$nginx_conf_path" + # Set global variables for NGINX helper + domain="$old_domain" + path_url="$new_path" + # Create a dedicated NGINX config + ynh_add_nginx_config +fi + +# Change the domain for NGINX +if [ $change_domain -eq 1 ] +then + # Delete file checksum for the old conf file location + ynh_delete_file_checksum --file="$nginx_conf_path" + mv $nginx_conf_path /etc/nginx/conf.d/$new_domain.d/$app.conf + # Store file checksum for the new config file location + ynh_store_file_checksum --file="/etc/nginx/conf.d/$new_domain.d/$app.conf" +fi + +#================================================= +# RELOAD NGINX +#================================================= +ynh_script_progression --message="Reloading NGINX web server..." --time --weight=1 + +ynh_systemd_action --service_name=nginx --action=reload + +#================================================= +# END OF SCRIPT +#================================================= + +ynh_script_progression --message="Change of URL completed for $app" --time --last diff --git a/scripts/install b/scripts/install index 87135bd..eac2008 100644 --- a/scripts/install +++ b/scripts/install @@ -13,10 +13,6 @@ source /usr/share/yunohost/helpers # MANAGE SCRIPT FAILURE #================================================= -ynh_clean_setup () { - true -} -# Exit if an error occurs during the execution of the script ynh_abort_if_errors #================================================= @@ -110,7 +106,7 @@ ynh_replace_string --match_string="__DB_NAME__" --replace_string="$db_name" --ta ynh_replace_string --match_string="__DB_PWD__" --replace_string="$db_pwd" --target_file="$final_path/.env" ynh_replace_string --match_string="__DOMAIN__" --replace_string="$domain" --target_file="$final_path/.env" -ynh_store_file_checksum "$final_path/.env" +ynh_store_file_checksum $final_path/.env #================================================= # FINAL BOOKSTACK INSTALL diff --git a/scripts/remove b/scripts/remove index 4b37728..516a25a 100644 --- a/scripts/remove +++ b/scripts/remove @@ -12,33 +12,32 @@ source /usr/share/yunohost/helpers #================================================= # LOAD SETTINGS #================================================= -ynh_print_info "Loading installation settings..." +ynh_script_progression --message="Loading installation settings..." --time --weight=1 app=$YNH_APP_INSTANCE_NAME -domain=$(ynh_app_setting_get $app domain) -port=$(ynh_app_setting_get $app port) -db_name=$(ynh_app_setting_get $app db_name) +domain=$(ynh_app_setting_get --app=$app --key=domain) +db_name=$(ynh_app_setting_get --app=$app --key=db_name) db_user=$db_name -final_path=$(ynh_app_setting_get $app final_path) +final_path=$(ynh_app_setting_get --app=$app --key=final_path) #================================================= # STANDARD REMOVE #================================================= -# REMOVE SERVICE FROM ADMIN PANEL +# REMOVE SERVICE INTEGRATION IN YUNOHOST #================================================= -# Remove a service from the admin panel, added by `yunohost service add` -if yunohost service status $app >/dev/null 2>&1 +# Remove the service from the list of services known by YunoHost (added from `yunohost service add`) +if ynh_exec_warn_less yunohost service status $app >/dev/null then - ynh_print_info "Removing $app service" + ynh_script_progression --message="Removing $app service integration..." --time --weight=1 yunohost service remove $app fi #================================================= # STOP AND REMOVE SERVICE #================================================= -ynh_print_info "Stopping and removing the systemd service" +ynh_script_progression --message="Stopping and removing the systemd service..." --time --weight=1 # Remove the dedicated systemd config ynh_remove_systemd_config @@ -46,88 +45,47 @@ ynh_remove_systemd_config #================================================= # REMOVE THE MYSQL DATABASE #================================================= -ynh_print_info "Removing the MySQL database" +ynh_script_progression --message="Removing the MySQL database..." --time --weight=1 # Remove a database if it exists, along with the associated user -ynh_mysql_remove_db $db_user $db_name - -#================================================= -# REMOVE DEPENDENCIES -#================================================= -ynh_print_info "Removing dependencies" - -# Remove metapackage and its dependencies -ynh_remove_app_dependencies +ynh_mysql_remove_db --db_user=$db_user --db_name=$db_name #================================================= # REMOVE APP MAIN DIR #================================================= -ynh_print_info "Removing app main directory" +ynh_script_progression --message="Removing app main directory..." --time --weight=1 # Remove the app directory securely -ynh_secure_remove "$final_path" +ynh_secure_remove --file="$final_path" #================================================= # REMOVE NGINX CONFIGURATION #================================================= -ynh_print_info "Removing nginx web server configuration" +ynh_script_progression --message="Removing NGINX web server configuration..." --time --weight=1 -# Remove the dedicated nginx config +# Remove the dedicated NGINX config ynh_remove_nginx_config #================================================= # REMOVE PHP-FPM CONFIGURATION #================================================= -#ynh_print_info "Removing php-fpm configuration" +ynh_script_progression --message="Removing PHP-FPM configuration..." --time --weight=1 -# Remove the dedicated php-fpm config -#ynh_remove_fpm_config - -#================================================= -# REMOVE LOGROTATE CONFIGURATION -#================================================= -ynh_print_info "Removing logrotate configuration" - -# Remove the app-specific logrotate config -ynh_remove_logrotate - -#================================================= -# CLOSE A PORT -#================================================= - -if yunohost firewall list | grep -q "\- $port$" -then - ynh_print_info "Closing port $port" - ynh_exec_warn_less yunohost firewall disallow TCP $port -fi - -#================================================= -# SPECIFIC REMOVE -#================================================= -# REMOVE THE CRON FILE -#================================================= - -# Remove a cron file -ynh_secure_remove "/etc/cron.d/$app" - -# Remove a directory securely -ynh_secure_remove "/etc/$app/" - -# Remove the log files -ynh_secure_remove "/var/log/$app/" +# Remove the dedicated PHP-FPM config +ynh_remove_fpm_config #================================================= # GENERIC FINALIZATION #================================================= # REMOVE DEDICATED USER #================================================= -ynh_print_info "Removing the dedicated system user" +ynh_script_progression --message="Removing the dedicated system user..." --time --weight=1 # Delete a system user -ynh_system_user_delete $app +ynh_system_user_delete --username=$app #================================================= # END OF SCRIPT #================================================= -ynh_print_info "Removal of $app completed" \ No newline at end of file +ynh_script_progression --message="Removal of $app completed" --time --last diff --git a/scripts/restore b/scripts/restore index 93169e9..80f2b29 100644 --- a/scripts/restore +++ b/scripts/restore @@ -1,52 +1,101 @@ #!/bin/bash -# Note: each files and directories you've saved using the ynh_backup helper -# will be located in the current directory, regarding the last argument. +#================================================= +# GENERIC START +#================================================= +# IMPORT GENERIC HELPERS +#================================================= -# Exit on command errors and treat unset variables as an error -set -eu - -# See comments in install script -app=$YNH_APP_INSTANCE_NAME - -# Source YunoHost helpers +source ../settings/scripts/_common.sh source /usr/share/yunohost/helpers -# Retrieve old app settings -domain=$(ynh_app_setting_get "$app" domain) -path_url=$(ynh_app_setting_get "$app" path_url) +#================================================= +# MANAGE SCRIPT FAILURE +#================================================= -# Check domain/path availability -sudo yunohost app checkurl "${domain}${path_url}" -a "$app" \ - || ynh_die "Path not available: ${domain}${path_url}" +ynh_abort_if_errors -# Restore sources & data -src_path="/var/www/${app}" -sudo cp -a ./sources "$src_path" +#================================================= +# LOAD SETTINGS +#================================================= +ynh_script_progression --message="Loading installation settings..." --time --weight=1 -# Restore permissions to app files -# you may need to make some file and/or directory writeable by www-data (nginx user) -sudo chown -R root: "$src_path" +app=$YNH_APP_INSTANCE_NAME -### MySQL (remove if not used) ### -# If a MySQL database is used: -# # Create and restore the database -# dbname=$app -# dbuser=$app -# dbpass=$(ynh_app_setting_get "$app" mysqlpwd) -# ynh_mysql_create_db "$dbname" "$dbuser" "$dbpass" -# ynh_mysql_connect_as "$dbuser" "$dbpass" "$dbname" < ./dump.sql -### MySQL end ### +domain=$(ynh_app_setting_get --app=$app --key=domain) +path_url=$(ynh_app_setting_get --app=$app --key=path) +final_path=$(ynh_app_setting_get --app=$app --key=final_path) +db_name=$(ynh_app_setting_get --app=$app --key=db_name) +db_user=$db_name +phpversion=$(ynh_app_setting_get --app=$app --key=phpversion) -# Restore NGINX configuration -sudo cp -a ./nginx.conf "/etc/nginx/conf.d/${domain}.d/${app}.conf" +#================================================= +# CHECK IF THE APP CAN BE RESTORED +#================================================= +ynh_script_progression --message="Validating restoration parameters..." --time --weight=1 -### PHP (remove if not used) ### -# If a dedicated php-fpm process is used: -# # Copy PHP-FPM pool configuration and reload the service -# sudo cp -a ./php-fpm.conf "/etc/php5/fpm/pool.d/${app}.conf" -# sudo service php5-fpm reload -### PHP end ### +ynh_webpath_available --domain=$domain --path_url=$path_url \ + || ynh_die --message="Path not available: ${domain}${path_url}" +test ! -d $final_path \ + || ynh_die --message="There is already a directory: $final_path " -# Restart webserver -sudo service nginx reload +#================================================= +# STANDARD RESTORATION STEPS +#================================================= +# RESTORE THE NGINX CONFIGURATION +#================================================= + +ynh_restore_file --origin_path="/etc/nginx/conf.d/$domain.d/$app.conf" + +#================================================= +# RESTORE THE APP MAIN DIR +#================================================= +ynh_script_progression --message="Restoring the app main directory..." --time --weight=1 + +ynh_restore_file --origin_path="$final_path" + +#================================================= +# RECREATE THE DEDICATED USER +#================================================= +ynh_script_progression --message="Recreating the dedicated system user..." --time --weight=1 + +# Create the dedicated user (if not existing) +ynh_system_user_create --username=$app + +#================================================= +# RESTORE USER RIGHTS +#================================================= + +# Restore permissions on app files +chown -R root: $final_path + +#================================================= +# RESTORE THE PHP-FPM CONFIGURATION +#================================================= + +ynh_restore_file --origin_path="/etc/php/$phpversion/fpm/pool.d/$app.conf" + +#================================================= +# RESTORE THE MYSQL DATABASE +#================================================= +ynh_script_progression --message="Restoring the MySQL database..." --time --weight=1 + +db_pwd=$(ynh_app_setting_get --app=$app --key=mysqlpwd) +ynh_mysql_setup_db --db_user=$db_user --db_name=$db_name --db_pwd=$db_pwd +ynh_mysql_connect_as --user=$db_user --password=$db_pwd --database=$db_name < ./db.sql + +#================================================= +# GENERIC FINALIZATION +#================================================= +# RELOAD NGINX AND PHP-FPM +#================================================= +ynh_script_progression --message="Reloading NGINX web server and PHP-FPM..." --time --weight=1 + +ynh_systemd_action --service_name=php$phpversion-fpm --action=reload +ynh_systemd_action --service_name=nginx --action=reload + +#================================================= +# END OF SCRIPT +#================================================= + +ynh_script_progression --message="Restoration completed for $app" --time --last diff --git a/scripts/upgrade b/scripts/upgrade index cd74c66..241cd95 100644 --- a/scripts/upgrade +++ b/scripts/upgrade @@ -1,57 +1,123 @@ #!/bin/bash -# Exit on command errors and treat unset variables as an error -set -eu +#================================================= +# GENERIC START +#================================================= +# IMPORT GENERIC HELPERS +#================================================= -# See comments in install script -app=$YNH_APP_INSTANCE_NAME -final_path=/opt/yunohost/$app - -# Source YunoHost helpers +source _common.sh source /usr/share/yunohost/helpers -# Set permissions to app files -# you may need to make some file and/or directory writeable by www-data (nginx user) -#sudo chown -R root: $src_path +#================================================= +# LOAD SETTINGS +#================================================= +ynh_script_progression --message="Loading installation settings..." --time --weight=1 + +app=$YNH_APP_INSTANCE_NAME + +domain=$(ynh_app_setting_get --app=$app --key=domain) +path_url=$(ynh_app_setting_get --app=$app --key=path) +final_path=$(ynh_app_setting_get --app=$app --key=final_path) +db_name=$(ynh_app_setting_get --app=$app --key=db_name) + +#================================================= +# CHECK VERSION +#================================================= + +upgrade_type=$(ynh_check_app_version_changed) + +#================================================= +# ENSURE DOWNWARD COMPATIBILITY +#================================================= +ynh_script_progression --message="Ensuring downward compatibility..." --time --weight=1 + +# +# N.B. : the followings setting migrations snippets are provided as *EXAMPLES* +# of what you may want to do in some cases (e.g. a setting was not defined on +# some legacy installs and you therefore want to initiaze stuff during upgrade) +# + +# If db_name doesn't exist, create it +#if [ -z "$db_name" ]; then +# db_name=$(ynh_sanitize_dbid --db_name=$app) +# ynh_app_setting_set --app=$app --key=db_name --value=$db_name +#fi + +# If final_path doesn't exist, create it +#if [ -z "$final_path" ]; then +# final_path=/var/www/$app +# ynh_app_setting_set --app=$app --key=final_path --value=$final_path +#fi + +#================================================= +# BACKUP BEFORE UPGRADE THEN ACTIVE TRAP +#================================================= +ynh_script_progression --message="Backing up the app before upgrading (may take a while)..." --time --weight=1 + +# Backup the current version of the app +ynh_backup_before_upgrade +ynh_clean_setup () { + # Restore it if the upgrade fails + ynh_restore_upgradebackup +} +# Exit if an error occurs during the execution of the script +ynh_abort_if_errors #================================================= # DOWNLOAD, CHECK AND UNPACK SOURCE #================================================= -ynh_app_setting_set $app final_path $final_path -# Download, check integrity, uncompress and patch the source from app.src -ynh_setup_source "$final_path" +if [ "$upgrade_type" == "UPGRADE_APP" ] +then + ynh_script_progression --message="Upgrading source files..." --time --weight=1 -#============================================== -# INSTALL PLEX -#============================================== - -dpkg --install $final_path/emby-server-deb* + # Download, check integrity, uncompress and patch the source from app.src + ynh_setup_source --dest_dir="$final_path" +fi #================================================= # NGINX CONFIGURATION #================================================= +ynh_script_progression --message="Upgrading NGINX web server configuration..." --time --weight=1 -# Create a dedicated nginx config -#ynh_add_nginx_config - +# Create a dedicated NGINX config +ynh_add_nginx_config #================================================= -# UPGRADE CONFIG +# CREATE DEDICATED USER #================================================= -#cp -a ../conf/loolwsd.xml /etc/loolwsd -#ynh_replace_string "__NEXTCLOUDDOMAIN__" "$nextcloud_domain" "/etc/loolwsd/loolwsd.xml" -#ynh_replace_string "__PASSWORD__" "$password" "/etc/loolwsd/loolwsd.xml" -#systemctl restart loolwsd +ynh_script_progression --message="Making sure dedicated system user exists..." --time --weight=1 +# Create a dedicated user (if not existing) +ynh_system_user_create --username=$app +#================================================= +# PHP-FPM CONFIGURATION +#================================================= +ynh_script_progression --message="Upgrading PHP-FPM configuration..." --time --weight=1 -# If app is public, add url to SSOWat conf as skipped_uris -#if [[ $is_public -eq 1 ]]; then - # See install script -# ynh_app_setting_set "$app" unprotected_uris "/" -#fi +# Create a dedicated PHP-FPM config +ynh_add_fpm_config -# Reload nginx service -systemctl restart plexmediaserver +#================================================= +# GENERIC FINALIZATION +#================================================= +# SECURE FILES AND DIRECTORIES +#================================================= +# Set permissions on app files +chown -R root: $final_path + +#================================================= +# RELOAD NGINX +#================================================= +ynh_script_progression --message="Reloading NGINX web server..." --time --weight=1 + +ynh_systemd_action --service_name=nginx --action=reload + +#================================================= +# END OF SCRIPT +#================================================= + +ynh_script_progression --message="Upgrade of $app completed" --time --last