diff --git a/check_process b/check_process deleted file mode 100644 index 43ab1de..0000000 --- a/check_process +++ /dev/null @@ -1,25 +0,0 @@ -;; Test complet - ; Manifest - domain="domain.tld" - is_public=1 - - ; Checks - pkg_linter=1 - setup_sub_dir=0 - setup_root=1 - setup_nourl=0 - setup_private=1 - setup_public=1 - upgrade=1 - # v13.0.5 - upgrade=1 from_commit=89f4f52e3cb3c9daf8eff43aab67bcda475da410 - backup_restore=1 - multi_instance=0 - change_url=0 -;;; Options -Email= -Notification=none -;;; Upgrade options - ; commit=CommitHash - name=Name and date of the commit. - manifest_arg=domain=DOMAIN&path=PATH&is_public=1&language=fr&admin=USER&password=pass&port=666& diff --git a/conf/nginx.conf b/conf/nginx.conf index 32ad407..b62c14a 100644 --- a/conf/nginx.conf +++ b/conf/nginx.conf @@ -1,6 +1,7 @@ #sub_path_only rewrite ^__PATH__$ __PATH__/ permanent; location __PATH__/ { + proxy_pass http://127.0.0.1:__PORT__; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; diff --git a/doc/DISCLAIMER.md b/doc/DISCLAIMER.md deleted file mode 100644 index 30a50d5..0000000 --- a/doc/DISCLAIMER.md +++ /dev/null @@ -1,21 +0,0 @@ -### Important points to read before installing - -- *Calckey* requires a dedicated root domain, e.g. `Calckey.domain.tld` -- Due to Cypress dependency, *Calckey* only works on 64-bit CPU machines. -- *Calckey* can take quite some time to install (more then 30 minutes). So take out some time and grab yourself a coffee. -- If installing from command line, using `screen` is recommended to avoid disconnection. See below. -- After installation, first page can take time to load and may show timeout error. Give it time to make itself ready for you. Refresh the page after 2 or 3 minutes. -- The first account created will be an admin user and will have all the admin rights. - -Using screen in case of disconnects - -``` -sudo apt-get install screen -screen -sudo yunohost app install https://github.com/YunoHost-Apps/Calckey_ynh.git -``` -Recover after disconnect: -``` -screen -d -screen -r -``` diff --git a/doc/DISCLAIMER_fr.md b/doc/DISCLAIMER_fr.md deleted file mode 100644 index a63adab..0000000 --- a/doc/DISCLAIMER_fr.md +++ /dev/null @@ -1,21 +0,0 @@ -### Points importants à lire avant l'installation - -- *Calckey* nécessite un domaine racine dédié, par ex. `Calckey.domain.tld` -- En raison de la dépendance de Cypress, *Calckey* ne fonctionne que sur les machines à processeur 64 bits. -- *Calckey* peut prendre un certain temps à installer (plus de 30 minutes). Alors prenez un peu de temps et prenez un café. -- Si l'installation à partir de la ligne de commande, l'utilisation de l'écran est réenregistrée pour éviter la déconnexion. Voir ci-dessous. -- Après l'installation, la première page peut prendre du temps à charger et peut afficher une erreur de délai d'attente. Donnez-lui le temps de se préparer pour vous. Actualiser la page après 2-3 minutes. -- Le premier compte créé sera un utilisateur administrateur et disposera de tous les droits d'administrateur. - -Utiliser *screen* en cas de déconnexion - -``` -sudo apt-get install screen -screen -sudo yunohost app install https://github.com/YunoHost-Apps/Calckey_ynh.git -``` -Récupérer après déconnexion : -``` -screen -d -screen -r -``` diff --git a/manifest.json b/manifest.json deleted file mode 100644 index bbfeb05..0000000 --- a/manifest.json +++ /dev/null @@ -1,46 +0,0 @@ -{ - "name": "Calckey", - "id": "calckey", - "packaging_format": 1, - "description": { - "en": "Fork of Misskey with better UI/UX, security, features", - "fr": "Un fork de Misskey avec une meilleure interface utilisateur, la sécurité, les fonctionnalités" - }, - "version": "13.1.2~ynh1", - "url": "https://i.calckey.cloud/", - "upstream": { - "license": "AGPL-3.0", - "website": "https://i.calckey.cloud/", - "demo": "https://i.calckey.cloud/", - "code": "https://codeberg.org/calckey/calckey" - }, - "license": "AGPL-3.0", - "maintainer": { - "name": "oufmilo" - }, - "requirements": { - "yunohost": ">= 11.0.0" - }, - "multi_instance": false, - "services": [ - "nginx" - ], - "arguments": { - "install": [ - { - "name": "domain", - "type": "domain" - }, - - { - "name": "is_public", - "type": "boolean", - "help": { - "en": "If enabled, Calckey will be accessible by people who do not have an account. This can be changed later via the webadmin.", - "fr": "Si cette case est cochée, Calckey sera accessible aux personnes n’ayant pas de compte. Vous pourrez changer ceci plus tard via la webadmin." - }, - "default": true - } - ] - } -} diff --git a/scripts/backup b/scripts/backup index 37a5e95..b88b274 100755 --- a/scripts/backup +++ b/scripts/backup @@ -10,26 +10,6 @@ source ../settings/scripts/_common.sh source /usr/share/yunohost/helpers -#================================================= -# MANAGE SCRIPT FAILURE -#================================================= - -ynh_clean_setup () { - true -} -# Exit if an error occurs during the execution of the script -ynh_abort_if_errors - -#================================================= -# LOAD SETTINGS -#================================================= -ynh_print_info --message="Loading installation settings..." - -app=$YNH_APP_INSTANCE_NAME - -final_path=$(ynh_app_setting_get --app=$app --key=final_path) -domain=$(ynh_app_setting_get --app=$app --key=domain) -db_name=$(ynh_app_setting_get --app=$app --key=db_name) #================================================= # DECLARE DATA AND CONF FILES TO BACKUP @@ -40,7 +20,7 @@ ynh_print_info --message="Declaring files to be backed up..." # BACKUP THE APP MAIN DIR #================================================= -ynh_backup --src_path="$final_path" +ynh_backup --src_path="$install_dir" #================================================= # BACKUP THE NGINX CONFIGURATION diff --git a/scripts/install b/scripts/install index b2b6dea..1f011ea 100644 --- a/scripts/install +++ b/scripts/install @@ -9,50 +9,11 @@ source _common.sh source /usr/share/yunohost/helpers -#================================================= -# MANAGE SCRIPT FAILURE -#================================================= - -ynh_clean_setup () { - ynh_clean_check_starting -} -# Exit if an error occurs during the execution of the script -ynh_abort_if_errors - #================================================= # RETRIEVE ARGUMENTS FROM THE MANIFEST #================================================= -domain=$YNH_APP_ARG_DOMAIN -path_url="/" -is_public=$YNH_APP_ARG_IS_PUBLIC -app=$YNH_APP_INSTANCE_NAME - -#================================================= -# CHECK IF THE APP CAN BE INSTALLED WITH THESE ARGS -#================================================= -ynh_script_progression --message="Validating installation parameters..." --weight=1 - -# Check machine architecture (in particular, we don't support ARM and 32bit machines) -if [ $YNH_ARCH != "amd64" ] && [ $YNH_ARCH != "aarch64" ] && [ $YNH_ARCH != "arm64" ] -then - ynh_die --message="Sorry, but this app can only be installed on a 64 bits machine :(" -fi - -final_path=/var/www/$app -test ! -e "$final_path" || ynh_die --message="This path already contains a folder" - -# Register (book) web path -ynh_webpath_register --app=$app --domain=$domain --path_url=$path_url - -#================================================= -# STORE SETTINGS FROM MANIFEST -#================================================= -ynh_script_progression --message="Storing installation settings..." --weight=1 - -ynh_app_setting_set --app=$app --key=domain --value=$domain -ynh_app_setting_set --app=$app --key=path --value=$path_url #================================================= # STANDARD MODIFICATIONS @@ -74,37 +35,14 @@ ynh_install_nodejs --nodejs_version=$NODEJS_VERSION ynh_exec_warn_less ynh_install_app_dependencies $pkg_dependencies -#================================================= -# CREATE DEDICATED USER -#================================================= -ynh_script_progression --message="Configuring system user..." --weight=2 - -# Create a system user -ynh_system_user_create --username=$app --home_dir="$final_path" - -#================================================= -# CREATE A POSTGRESQL DATABASE -#================================================= -ynh_script_progression --message="Creating a PostgreSQL database..." --weight=2 - -db_name=$(ynh_sanitize_dbid --db_name=$app) -db_user=$db_name -ynh_app_setting_set --app=$app --key=db_name --value=$db_name -ynh_psql_test_if_first_run -ynh_psql_setup_db --db_user=$db_user --db_name=$db_name #================================================= # DOWNLOAD, CHECK AND UNPACK SOURCE #================================================= ynh_script_progression --message="Setting up source files..." --weight=3 -ynh_app_setting_set --app=$app --key=final_path --value=$final_path # Download, check integrity, uncompress and patch the source from app.src -ynh_setup_source --dest_dir="$final_path" - -chmod 750 "$final_path" -chmod -R o-rwx "$final_path" -chown -R $app:www-data "$final_path" +ynh_setup_source --dest_dir="$install_dir" #================================================= # NGINX CONFIGURATION @@ -123,20 +61,28 @@ ynh_script_progression --message="Adding a configuration file..." --weight=1 redis_db=$(ynh_redis_get_free_db) ynh_app_setting_set --app="$app" --key=redis_db --value="$redis_db" -ynh_add_config --template="../conf/default.yml" --destination="$final_path/.config/default.yml" +ynh_add_config --template="../conf/default.yml" --destination="$install_dir/.config/default.yml" + +#================================================= +# SECURE FILES AND DIRECTORIES +#================================================= + +# Set permissions to app files +chmod -R o-rwx "$install_dir" +chown -R $app:www-data "$install_dir" #================================================= # BUILD APP #================================================= ynh_script_progression --message="Building app... This will take some time." --weight=15 -pushd "$final_path" +pushd "$install_dir" ynh_use_nodejs corepack enable corepack prepare pnpm@latest --activate - ynh_exec_warn_less ynh_exec_as $app env $ynh_node_load_PATH NODE_ENV=production pnpm install + ynh_exec_warn_less ynh_exec_as $app env $ynh_node_load_PATH pnpm install ynh_exec_warn_less ynh_exec_as $app env $ynh_node_load_PATH NODE_ENV=production pnpm build - ynh_exec_warn_less ynh_exec_as $app env $ynh_node_load_PATH NODE_ENV=production pnpm run init + ynh_exec_warn_less ynh_exec_as $app env $ynh_node_load_PATH pnpm run init popd #================================================= @@ -171,23 +117,6 @@ ynh_script_progression --message="Starting a systemd service..." --weight=1 # Start a systemd service ynh_systemd_action --service_name=$app --action="start" --log_path=systemd --line_match="All workers started" -#================================================= -# SETUP SSOWAT -#================================================= -ynh_script_progression --message="Configuring permissions..." --weight=1 - -# Make app public if necessary -if [ $is_public -eq 1 ] -then - ynh_permission_update --permission="main" --add="visitors" -fi - -#================================================= -# RELOAD NGINX -#================================================= -ynh_script_progression --message="Reloading NGINX web server..." - -ynh_systemd_action --service_name=nginx --action=reload #================================================= # END OF SCRIPT diff --git a/scripts/remove b/scripts/remove index b4d4187..374019a 100755 --- a/scripts/remove +++ b/scripts/remove @@ -9,19 +9,6 @@ source _common.sh source /usr/share/yunohost/helpers -#================================================= -# LOAD SETTINGS -#================================================= -ynh_script_progression --message="Loading installation settings..." - -app=$YNH_APP_INSTANCE_NAME - -domain=$(ynh_app_setting_get --app=$app --key=domain) -port=$(ynh_app_setting_get --app=$app --key=port) -db_name=$(ynh_app_setting_get --app=$app --key=db_name) -db_user=$db_name -final_path=$(ynh_app_setting_get --app=$app --key=final_path) -redis_db=$(ynh_app_setting_get --app=$app --key=redis_db) #================================================= # STANDARD REMOVE @@ -67,14 +54,6 @@ ynh_script_progression --message="Removing the redis database..." --weight=1 ynh_redis_remove_db "$redis_db" -#================================================= -# REMOVE APP MAIN DIR -#================================================= -ynh_script_progression --message="Removing app main directory..." --weight=1 - -# Remove the app directory securely -ynh_secure_remove --file="$final_path" - #================================================= # REMOVE NGINX CONFIGURATION #================================================= diff --git a/scripts/restore b/scripts/restore index 2e6e9c9..4581a6f 100644 --- a/scripts/restore +++ b/scripts/restore @@ -10,58 +10,16 @@ source ../settings/scripts/_common.sh source /usr/share/yunohost/helpers -#================================================= -# MANAGE SCRIPT FAILURE -#================================================= - -ynh_clean_setup () { - ynh_clean_check_starting -} -# Exit if an error occurs during the execution of the script -ynh_abort_if_errors - -#================================================= -# LOAD SETTINGS -#================================================= -ynh_script_progression --message="Loading installation settings..." - -app=$YNH_APP_INSTANCE_NAME - -domain=$(ynh_app_setting_get --app=$app --key=domain) -path_url=$(ynh_app_setting_get --app=$app --key=path) -final_path=$(ynh_app_setting_get --app=$app --key=final_path) -db_name=$(ynh_app_setting_get --app=$app --key=db_name) -db_user=$db_name -db_pwd=$(ynh_app_setting_get --app=$app --key=psqlpwd) - -#================================================= -# CHECK IF THE APP CAN BE RESTORED -#================================================= -ynh_script_progression --message="Validating restoration parameters..." --weight=1 - -test ! -d $final_path \ - || ynh_die --message="There is already a directory: $final_path " - #================================================= # STANDARD RESTORATION STEPS #================================================= -# RECREATE THE DEDICATED USER -#================================================= -ynh_script_progression --message="Recreating the dedicated system user..." --weight=1 - -# Create the dedicated user (if not existing) -ynh_system_user_create --username=$app --home_dir="$final_path" #================================================= # RESTORE THE APP MAIN DIR #================================================= ynh_script_progression --message="Restoring the app main directory..." --weight=1 -ynh_restore_file --origin_path="$final_path" - -chmod 750 "$final_path" -chmod -R o-rwx "$final_path" -chown -R $app:www-data "$final_path" +ynh_restore_file --origin_path="$install_dir" #================================================= # SPECIFIC RESTORATION @@ -80,7 +38,7 @@ ynh_exec_warn_less ynh_install_app_dependencies $pkg_dependencies ynh_script_progression --message="Reinstalling pnpm..." --weight=1 # Define and install pnpm -pushd "$final_path" +pushd "$install_dir" ynh_use_nodejs corepack enable corepack prepare pnpm@latest --activate @@ -96,13 +54,12 @@ ynh_script_progression --message="Restoring the NGINX web server configuration.. ynh_restore_file --origin_path="/etc/nginx/conf.d/$domain.d/$app.conf" #================================================= -# RESTORE THE POSTGRESQL DATABASE +# SECURE FILES AND DIRECTORIES #================================================= -ynh_script_progression --message="Restoring the PostgreSQL database..." --weight=1 -ynh_psql_test_if_first_run -ynh_psql_setup_db --db_user=$db_user --db_name=$db_name --db_pwd=$db_pwd -ynh_psql_execute_file_as_root --file="./db.sql" --database=$db_name +# Set permissions to app files +chmod -R o-rwx "$install_dir" +chown -R $app:www-data "$install_dir" #================================================= # RESTORE SYSTEMD diff --git a/scripts/upgrade b/scripts/upgrade index ed1c22f..0e9934e 100644 --- a/scripts/upgrade +++ b/scripts/upgrade @@ -9,19 +9,6 @@ source _common.sh source /usr/share/yunohost/helpers -#================================================= -# LOAD SETTINGS -#================================================= -ynh_script_progression --message="Loading installation settings..." --weight=1 - -app=$YNH_APP_INSTANCE_NAME - -domain=$(ynh_app_setting_get --app=$app --key=domain) -path_url=$(ynh_app_setting_get --app=$app --key=path) -final_path=$(ynh_app_setting_get --app=$app --key=final_path) -db_name=$(ynh_app_setting_get --app=$app --key=db_name) -db_pwd=$(ynh_app_setting_get --app=$app --key=psqlpwd) -port=$(ynh_app_setting_get --app=$app --key=port) #================================================= # CHECK VERSION @@ -75,28 +62,12 @@ if [ -z "$db_name" ]; then ynh_app_setting_set --app=$app --key=db_name --value=$db_name fi -# If final_path doesn't exist, create it -if [ -z "$final_path" ]; then - final_path=/var/www/$app - ynh_app_setting_set --app=$app --key=final_path --value=$final_path +# If install_dir doesn't exist, create it +if [ -z "$install_dir" ]; then + install_dir=/var/www/$app + ynh_app_setting_set --app=$app --key=install_dir --value=$install_dir fi -# Cleaning legacy permissions -if ynh_legacy_permissions_exists; then - ynh_legacy_permissions_delete_all - - ynh_app_setting_delete --app=$app --key=is_public -fi - - -#================================================= -# CREATE DEDICATED USER -#================================================= -ynh_script_progression --message="Making sure dedicated system user exists..." --weight=1 - -# Create a dedicated user (if not existing) -ynh_system_user_create --username=$app --home_dir="$final_path" - #================================================= # DOWNLOAD, CHECK AND UNPACK SOURCE #================================================= @@ -106,13 +77,9 @@ then ynh_script_progression --message="Upgrading source files..." # Download, check integrity, uncompress and patch the source from app.src - ynh_setup_source --dest_dir="$final_path" --keep=".config/default.yml" + ynh_setup_source --dest_dir="$install_dir" --keep=".config/default.yml" fi -chmod 750 "$final_path" -chmod -R o-rwx "$final_path" -chown -R $app:www-data "$final_path" - #================================================= # UPGRADE DEPENDENCIES #================================================= @@ -123,7 +90,7 @@ ynh_exec_warn_less ynh_install_app_dependencies $pkg_dependencies # REMOVE YARN (upgrade from 13.0.x to 13.1.x) ynh_script_progression --message="Removing old version dependency..." -ynh_secure_remove --file="$final_path/.yarn" +ynh_secure_remove --file="$install_dir/.yarn" #================================================= # NGINX CONFIGURATION @@ -138,7 +105,7 @@ ynh_add_nginx_config #================================================= ynh_script_progression --message="Building app..." -pushd "$final_path" +pushd "$install_dir" corepack enable corepack prepare pnpm@latest --activate ynh_exec_warn_less ynh_exec_as $app env $ynh_node_load_PATH pnpm clean-all @@ -186,6 +153,14 @@ ynh_script_progression --message="Reloading NGINX web server..." --weight=1 ynh_systemd_action --service_name=nginx --action=reload +#================================================= +# SECURE FILES AND DIRECTORIES +#================================================= + +# Set permissions to app files +chmod -R o-rwx "$install_dir" +chown -R $app:www-data "$install_dir" + #================================================= # END OF SCRIPT #=================================================