ostart curation

scripts/backup

@@ -26,32 +26,12 @@ ynh_print_info --message="Declaring files to be backed up..."
 
 ynh_backup --src_path="$install_dir"
 
-#=================================================
-# BACKUP THE DATA DIR
-#=================================================
-
-# Only relevant if there is a "data_dir" resource for this app
-ynh_backup --src_path="$data_dir" --is_big
-
 #=================================================
 # BACKUP THE NGINX CONFIGURATION
 #=================================================
 
 ynh_backup --src_path="/etc/nginx/conf.d/$domain.d/$app.conf"
 
-#=================================================
-# BACKUP THE PHP-FPM CONFIGURATION
-#=================================================
-
-ynh_backup --src_path="/etc/php/$phpversion/fpm/pool.d/$app.conf"
-
-#=================================================
-# BACKUP FAIL2BAN CONFIGURATION
-#=================================================
-
-ynh_backup --src_path="/etc/fail2ban/jail.d/$app.conf"
-ynh_backup --src_path="/etc/fail2ban/filter.d/$app.conf"
-
 #=================================================
 # SPECIFIC BACKUP
 #=================================================
@@ -74,16 +54,6 @@ ynh_backup --src_path="/etc/cron.d/$app"
 
 ynh_backup --src_path="/etc/$app/"
 
-#=================================================
-# BACKUP THE MYSQL DATABASE
-#=================================================
-ynh_print_info --message="Backing up the MySQL database..."
-
-### (However, things like MySQL dumps *do* take some time to run, though the
-### copy of the generated dump to the archive still happens later)
-
-ynh_mysql_dump_db --database="$db_name" > db.sql
-
 #=================================================
 # END OF SCRIPT
 #=================================================

scripts/config

@@ -18,84 +18,6 @@ source /usr/share/yunohost/helpers
 
 ynh_abort_if_errors
 
-#=================================================
-# RETRIEVE ARGUMENTS
-#=================================================
-
-install_dir=$(ynh_app_setting_get --app=$app --key=install_dir)
-
-#=================================================
-# SPECIFIC GETTERS FOR TOML SHORT KEY
-#=================================================
-
-get__amount() {
-    # Here we can imagine to have an API call to stripe to know the amount of donation during a month
-    local amount = 200
-
-    # It's possible to change some properties of the question by overriding it:
-    if [ $amount -gt 100 ]
-    then
-    cat << EOF
-style: success
-value: $amount
-ask:
-  en: A lot of donation this month: **$amount €**
-EOF
-    else
-    cat << EOF
-style: danger
-value: $amount
-ask:
-  en: Not so much donation this month: $amount €
-EOF
-    fi
-}
-
-get__prices() {
-    local prices = "$(grep "DONATION\['" "$install_dir/settings.py" | sed -r "s@^DONATION\['([^']*)'\]\['([^']*)'\] = '([^']*)'@\1/\2/\3@g" | sed -z 's/\n/,/g;s/,$/\n/')"
-    if [ "$prices" == "," ];
-    then
-        # Return YNH_NULL if you prefer to not return a value at all.
-        echo YNH_NULL
-    else
-        echo $prices
-    fi
-}
-
-
-#=================================================
-# SPECIFIC VALIDATORS FOR TOML SHORT KEYS
-#=================================================
-validate__publishable_key() {
-
-    # We can imagine here we test if the key is really a publisheable key
-    (is_secret_key $publishable_key) &&
-        echo 'This key seems to be a secret key'
-}
-
-#=================================================
-# SPECIFIC SETTERS FOR TOML SHORT KEYS
-#=================================================
-set__prices() {
-
-    #---------------------------------------------
-    # IMPORTANT: setter are trigger only if a change is detected
-    #---------------------------------------------
-    for price in $(echo $prices | sed "s/,/ /"); do
-        frequency=$(echo $price | cut -d/ -f1)
-        currency=$(echo $price | cut -d/ -f2)
-        price_id=$(echo $price | cut -d/ -f3)
-        sed "d/DONATION\['$frequency'\]\['$currency'\]" "$install_dir/settings.py"
-
-        echo "DONATION['$frequency']['$currency'] = '$price_id'" >> "$install_dir/settings.py"
-    done
-    
-    #---------------------------------------------
-    # IMPORTANT: to be able to upgrade properly, you have to saved the value in settings too
-    #---------------------------------------------
-    ynh_app_setting_set $app prices $prices
-}
-
 #=================================================
 # GENERIC FINALIZATION
 #=================================================

scripts/install

@@ -9,27 +9,6 @@
 source _common.sh
 source /usr/share/yunohost/helpers
 
-# Install parameters are automatically saved as settings
-#
-# Settings are automatically loaded as bash variables
-# in every app script context, therefore typically these will exist:
-# - $domain
-# - $path
-# - $language
-# ... etc
-#
-# Resources defined in the manifest are provisioned prior to this script
-# and corresponding settings are also available, such as:
-# - $install_dir
-# - $port
-# - $db_name
-# ...
-
-#
-# $app is the app id (i.e. 'example' for first install, 
-# or 'example__2', '__3', ... for multi-instance installs)
-#
-
 #=================================================
 # APP "BUILD" (DEPLOYING SOURCES, VENV, COMPILING ETC)
 #=================================================
@@ -54,34 +33,6 @@ chown -R $app:www-data "$install_dir"
 #=================================================
 ynh_script_progression --message="Adding system configurations related to $app..." --weight=1
 
-### `ynh_add_fpm_config` is used to set up a PHP config.
-### You can remove it if your app doesn't use PHP.
-### `ynh_add_fpm_config` will use the files conf/php-fpm.conf
-### If you're not using these lines:
-###		- You can remove these files in conf/.
-###		- Remove the section "BACKUP THE PHP-FPM CONFIGURATION" in the backup script
-###		- Remove also the section "REMOVE PHP-FPM CONFIGURATION" in the remove script
-###		- As well as the section "RESTORE THE PHP-FPM CONFIGURATION" in the restore script
-###		  with the reload at the end of the script.
-###		- And the section "PHP-FPM CONFIGURATION" in the upgrade script
-
-# Create a dedicated PHP-FPM config using the conf/php-fpm.conf or conf/extra_php-fpm.conf
-ynh_add_fpm_config
-
-# Create a dedicated NGINX config using the conf/nginx.conf template
-ynh_add_nginx_config
-
-### `ynh_systemd_config` is used to configure a systemd script for an app.
-### It can be used for apps that use sysvinit (with adaptation) or systemd.
-### Have a look at the app to be sure this app needs a systemd script.
-### `ynh_systemd_config` will use the file conf/systemd.service
-### If you're not using these lines:
-###		- You can remove those files in conf/.
-###		- Remove the section "BACKUP SYSTEMD" in the backup script
-###		- Remove also the section "STOP AND REMOVE SERVICE" in the remove script
-###		- As well as the section "RESTORE SYSTEMD" in the restore script
-###		- And the section "SETUP SYSTEMD" in the upgrade script
-
 # Create a dedicated systemd config
 ynh_add_systemd_config
 
@@ -96,22 +47,6 @@ ynh_add_systemd_config
 
 yunohost service add $app --description="A short description of the app" --log="/var/log/$app/$app.log"
 
-### Additional options starting with 3.8:
-###
-### --needs_exposed_ports "$port" a list of ports that needs to be publicly exposed
-###                               which will then be checked by YunoHost's diagnosis system
-###                               (N.B. DO NOT USE THIS is the port is only internal!!!)
-###
-### --test_status "some command"  a custom command to check the status of the service
-###                               (only relevant if 'systemctl status' doesn't do a good job)
-###
-### --test_conf "some command"    some command similar to "nginx -t" that validates the conf of the service
-###
-### Re-calling 'yunohost service add' during the upgrade script is the right way
-### to proceed if you later realize that you need to enable some flags that
-### weren't enabled on old installs (be careful it'll override the existing
-### service though so you should re-provide all relevant flags when doing so)
-
 ### `ynh_use_logrotate` is used to configure a logrotate configuration for the logs of this app.
 ### Use this helper only if there is effectively a log file for this app.
 ### If you're not using this helper:
@@ -123,9 +58,6 @@ yunohost service add $app --description="A short description of the app" --log="
 # Use logrotate to manage application logfile(s)
 ynh_use_logrotate
 
-# Create a dedicated Fail2Ban config
-ynh_add_fail2ban_config --logpath="/var/log/nginx/${domain}-error.log" --failregex="Regex to match into the log for a failed login"
-
 #=================================================
 # APP INITIAL CONFIGURATION
 #=================================================
@@ -160,19 +92,6 @@ chown $app:$app "$install_dir/some_config_file"
 ### ynh_replace_string --match_string="match_string" --replace_string="replace_string" --target_file="$install_dir/some_config_file"
 ### ynh_store_file_checksum --file="$install_dir/some_config_file"
 
-#=================================================
-# SETUP APPLICATION WITH CURL
-#=================================================
-
-### Use these lines only if the app installation needs to be finalized through
-### web forms. We generally don't want to ask the final user,
-### so we're going to use curl to automatically fill the fields and submit the
-### forms.
-
-# Installation with curl
-ynh_script_progression --message="Finalizing installation..." --weight=1
-ynh_local_curl "/INSTALL_PATH" "key1=value1" "key2=value2" "key3=value3"
-
 #=================================================
 # GENERIC FINALIZATION
 #=================================================

scripts/remove

@@ -42,12 +42,8 @@ ynh_remove_systemd_config
 
 ynh_remove_nginx_config
 
-ynh_remove_fpm_config
-
 ynh_remove_logrotate
 
-ynh_remove_fail2ban_config
-
 # Remove other various files specific to the app... such as :
 
 ynh_secure_remove --file="/etc/cron.d/$app"

scripts/restore

@@ -22,22 +22,6 @@ ynh_restore_file --origin_path="$install_dir"
 # ownership to all files such as after the ynh_setup_source step
 chown -R $app:www-data "$install_dir"
 
-#=================================================
-# RESTORE THE DATA DIRECTORY
-#=================================================
-ynh_script_progression --message="Restoring the data directory..." --weight=1
-
-ynh_restore_file --origin_path="$data_dir" --not_mandatory
-
-# (Same as for install dir)
-chown -R $app:www-data "$data_dir"
-
-#=================================================
-# RESTORE THE MYSQL DATABASE
-#=================================================
-ynh_script_progression --message="Restoring the MySQL database..." --weight=1
-
-ynh_mysql_connect_as --user=$db_user --password=$db_pwd --database=$db_name < ./db.sql
 
 #=================================================
 # RESTORE SYSTEM CONFIGURATIONS
@@ -46,9 +30,6 @@ ynh_mysql_connect_as --user=$db_user --password=$db_pwd --database=$db_name < ./
 #=================================================
 ynh_script_progression --message="Restoring system configurations related to $app..." --weight=1
 
-# This should be a symetric version of what happens in the install script
-
-ynh_restore_file --origin_path="/etc/php/$phpversion/fpm/pool.d/$app.conf"
 
 ynh_restore_file --origin_path="/etc/nginx/conf.d/$domain.d/$app.conf"
 
@@ -59,10 +40,6 @@ yunohost service add $app --description="A short description of the app" --log="
 
 ynh_restore_file --origin_path="/etc/logrotate.d/$app"
 
-ynh_restore_file --origin_path="/etc/fail2ban/jail.d/$app.conf"
-ynh_restore_file --origin_path="/etc/fail2ban/filter.d/$app.conf"
-ynh_systemd_action --action=restart --service_name=fail2ban
-
 # Other various files...
 
 ynh_restore_file --origin_path="/etc/cron.d/$app"

scripts/upgrade

@@ -46,7 +46,7 @@ upgrade_type=$(ynh_check_app_version_changed)
 # If db_name doesn't exist, create it
 #if [ -z "$db_name" ]; then
 #	db_name=$(ynh_sanitize_dbid --db_name=$app)
-#	ynh_app_setting_set --app=$app --key=db_name --value=$db_name
+#REMOVEME? #	ynh_app_setting_set --app=$app --key=db_name --value=$db_name
 #fi
 
 # If install_dir doesn't exist, create it
@@ -88,8 +88,6 @@ ynh_script_progression --message="Upgrading system configurations related to $ap
 
 # This should be a literal copypasta of what happened in the install's "System configuration" section
 
-ynh_add_fpm_config
-
 ynh_add_nginx_config
 
 ynh_add_systemd_config
@@ -98,8 +96,6 @@ yunohost service add $app --description="A short description of the app" --log="
 
 ynh_use_logrotate --non-append
 
-ynh_add_fail2ban_config --logpath="/var/log/nginx/${domain}-error.log" --failregex="Regex to match into the log for a failed login"
-
 #=================================================
 # RECONFIGURE THE APP (UPDATE CONF, APPLY MIGRATIONS...)
 #=================================================