diff --git a/conf/extra_php-fpm.conf b/conf/extra_php-fpm.conf new file mode 100644 index 0000000..700c37c --- /dev/null +++ b/conf/extra_php-fpm.conf @@ -0,0 +1,4 @@ +; Additional php.ini defines, specific to this pool of workers. + +php_admin_value[upload_max_filesize] = 50M +php_admin_value[post_max_size] = 50M diff --git a/conf/nginx.conf b/conf/nginx.conf index c5d0284..2dad80d 100644 --- a/conf/nginx.conf +++ b/conf/nginx.conf @@ -2,7 +2,7 @@ location __PATH__/ { # Path to source - alias __INSTALL_DIR__/ ; + alias __INSTALL_DIR__/; index index.php; diff --git a/conf/php-fpm.conf b/conf/php-fpm.conf deleted file mode 100644 index 13a53b0..0000000 --- a/conf/php-fpm.conf +++ /dev/null @@ -1,430 +0,0 @@ -; Start a new pool named 'www'. -; the variable $pool can be used in any directive and will be replaced by the -; pool name ('www' here) -[__NAMETOCHANGE__] - -; Per pool prefix -; It only applies on the following directives: -; - 'access.log' -; - 'slowlog' -; - 'listen' (unixsocket) -; - 'chroot' -; - 'chdir' -; - 'php_values' -; - 'php_admin_values' -; When not set, the global prefix (or /usr) applies instead. -; Note: This directive can also be relative to the global prefix. -; Default Value: none -;prefix = /path/to/pools/$pool - -; Unix user/group of processes -; Note: The user is mandatory. If the group is not set, the default user's group -; will be used. -user = __USER__ -group = __USER__ - -; The address on which to accept FastCGI requests. -; Valid syntaxes are: -; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific IPv4 address on -; a specific port; -; '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on -; a specific port; -; 'port' - to listen on a TCP socket to all addresses -; (IPv6 and IPv4-mapped) on a specific port; -; '/path/to/unix/socket' - to listen on a unix socket. -; Note: This value is mandatory. -listen = /var/run/php/php__PHPVERSION__-fpm-__NAMETOCHANGE__.sock - -; Set listen(2) backlog. -; Default Value: 511 (-1 on FreeBSD and OpenBSD) -;listen.backlog = 511 - -; Set permissions for unix socket, if one is used. In Linux, read/write -; permissions must be set in order to allow connections from a web server. Many -; BSD-derived systems allow connections regardless of permissions. -; Default Values: user and group are set as the running user -; mode is set to 0660 -listen.owner = www-data -listen.group = www-data -;listen.mode = 0660 -; When POSIX Access Control Lists are supported you can set them using -; these options, value is a comma separated list of user/group names. -; When set, listen.owner and listen.group are ignored -;listen.acl_users = -;listen.acl_groups = - -; List of addresses (IPv4/IPv6) of FastCGI clients which are allowed to connect. -; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original -; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address -; must be separated by a comma. If this value is left blank, connections will be -; accepted from any ip address. -; Default Value: any -;listen.allowed_clients = 127.0.0.1 - -; Specify the nice(2) priority to apply to the pool processes (only if set) -; The value can vary from -19 (highest priority) to 20 (lower priority) -; Note: - It will only work if the FPM master process is launched as root -; - The pool processes will inherit the master process priority -; unless it specified otherwise -; Default Value: no set -; process.priority = -19 - -; Set the process dumpable flag (PR_SET_DUMPABLE prctl) even if the process user -; or group is differrent than the master process user. It allows to create process -; core dump and ptrace the process for the pool user. -; Default Value: no -; process.dumpable = yes - -; Choose how the process manager will control the number of child processes. -; Possible Values: -; static - a fixed number (pm.max_children) of child processes; -; dynamic - the number of child processes are set dynamically based on the -; following directives. With this process management, there will be -; always at least 1 children. -; pm.max_children - the maximum number of children that can -; be alive at the same time. -; pm.start_servers - the number of children created on startup. -; pm.min_spare_servers - the minimum number of children in 'idle' -; state (waiting to process). If the number -; of 'idle' processes is less than this -; number then some children will be created. -; pm.max_spare_servers - the maximum number of children in 'idle' -; state (waiting to process). If the number -; of 'idle' processes is greater than this -; number then some children will be killed. -; ondemand - no children are created at startup. Children will be forked when -; new requests will connect. The following parameter are used: -; pm.max_children - the maximum number of children that -; can be alive at the same time. -; pm.process_idle_timeout - The number of seconds after which -; an idle process will be killed. -; Note: This value is mandatory. -pm = dynamic - -; The number of child processes to be created when pm is set to 'static' and the -; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'. -; This value sets the limit on the number of simultaneous requests that will be -; served. Equivalent to the ApacheMaxClients directive with mpm_prefork. -; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP -; CGI. The below defaults are based on a server without much resources. Don't -; forget to tweak pm.* to fit your needs. -; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand' -; Note: This value is mandatory. -pm.max_children = 5 - -; The number of child processes created on startup. -; Note: Used only when pm is set to 'dynamic' -; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2 -pm.start_servers = 2 - -; The desired minimum number of idle server processes. -; Note: Used only when pm is set to 'dynamic' -; Note: Mandatory when pm is set to 'dynamic' -pm.min_spare_servers = 1 - -; The desired maximum number of idle server processes. -; Note: Used only when pm is set to 'dynamic' -; Note: Mandatory when pm is set to 'dynamic' -pm.max_spare_servers = 3 - -; The number of seconds after which an idle process will be killed. -; Note: Used only when pm is set to 'ondemand' -; Default Value: 10s -;pm.process_idle_timeout = 10s; - -; The number of requests each child process should execute before respawning. -; This can be useful to work around memory leaks in 3rd party libraries. For -; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS. -; Default Value: 0 -;pm.max_requests = 500 - -; The URI to view the FPM status page. If this value is not set, no URI will be -; recognized as a status page. It shows the following informations: -; pool - the name of the pool; -; process manager - static, dynamic or ondemand; -; start time - the date and time FPM has started; -; start since - number of seconds since FPM has started; -; accepted conn - the number of request accepted by the pool; -; listen queue - the number of request in the queue of pending -; connections (see backlog in listen(2)); -; max listen queue - the maximum number of requests in the queue -; of pending connections since FPM has started; -; listen queue len - the size of the socket queue of pending connections; -; idle processes - the number of idle processes; -; active processes - the number of active processes; -; total processes - the number of idle + active processes; -; max active processes - the maximum number of active processes since FPM -; has started; -; max children reached - number of times, the process limit has been reached, -; when pm tries to start more children (works only for -; pm 'dynamic' and 'ondemand'); -; Value are updated in real time. -; Example output: -; pool: www -; process manager: static -; start time: 01/Jul/2011:17:53:49 +0200 -; start since: 62636 -; accepted conn: 190460 -; listen queue: 0 -; max listen queue: 1 -; listen queue len: 42 -; idle processes: 4 -; active processes: 11 -; total processes: 15 -; max active processes: 12 -; max children reached: 0 -; -; By default the status page output is formatted as text/plain. Passing either -; 'html', 'xml' or 'json' in the query string will return the corresponding -; output syntax. Example: -; http://www.foo.bar/status -; http://www.foo.bar/status?json -; http://www.foo.bar/status?html -; http://www.foo.bar/status?xml -; -; By default the status page only outputs short status. Passing 'full' in the -; query string will also return status for each pool process. -; Example: -; http://www.foo.bar/status?full -; http://www.foo.bar/status?json&full -; http://www.foo.bar/status?html&full -; http://www.foo.bar/status?xml&full -; The Full status returns for each process: -; pid - the PID of the process; -; state - the state of the process (Idle, Running, ...); -; start time - the date and time the process has started; -; start since - the number of seconds since the process has started; -; requests - the number of requests the process has served; -; request duration - the duration in µs of the requests; -; request method - the request method (GET, POST, ...); -; request URI - the request URI with the query string; -; content length - the content length of the request (only with POST); -; user - the user (PHP_AUTH_USER) (or '-' if not set); -; script - the main script called (or '-' if not set); -; last request cpu - the %cpu the last request consumed -; it's always 0 if the process is not in Idle state -; because CPU calculation is done when the request -; processing has terminated; -; last request memory - the max amount of memory the last request consumed -; it's always 0 if the process is not in Idle state -; because memory calculation is done when the request -; processing has terminated; -; If the process is in Idle state, then informations are related to the -; last request the process has served. Otherwise informations are related to -; the current request being served. -; Example output: -; ************************ -; pid: 31330 -; state: Running -; start time: 01/Jul/2011:17:53:49 +0200 -; start since: 63087 -; requests: 12808 -; request duration: 1250261 -; request method: GET -; request URI: /test_mem.php?N=10000 -; content length: 0 -; user: - -; script: /home/fat/web/docs/php/test_mem.php -; last request cpu: 0.00 -; last request memory: 0 -; -; Note: There is a real-time FPM status monitoring sample web page available -; It's available in: /usr/share/php/7.0/fpm/status.html -; -; Note: The value must start with a leading slash (/). The value can be -; anything, but it may not be a good idea to use the .php extension or it -; may conflict with a real PHP file. -; Default Value: not set -;pm.status_path = /status - -; The ping URI to call the monitoring page of FPM. If this value is not set, no -; URI will be recognized as a ping page. This could be used to test from outside -; that FPM is alive and responding, or to -; - create a graph of FPM availability (rrd or such); -; - remove a server from a group if it is not responding (load balancing); -; - trigger alerts for the operating team (24/7). -; Note: The value must start with a leading slash (/). The value can be -; anything, but it may not be a good idea to use the .php extension or it -; may conflict with a real PHP file. -; Default Value: not set -;ping.path = /ping - -; This directive may be used to customize the response of a ping request. The -; response is formatted as text/plain with a 200 response code. -; Default Value: pong -;ping.response = pong - -; The access log file -; Default: not set -;access.log = log/$pool.access.log - -; The access log format. -; The following syntax is allowed -; %%: the '%' character -; %C: %CPU used by the request -; it can accept the following format: -; - %{user}C for user CPU only -; - %{system}C for system CPU only -; - %{total}C for user + system CPU (default) -; %d: time taken to serve the request -; it can accept the following format: -; - %{seconds}d (default) -; - %{miliseconds}d -; - %{mili}d -; - %{microseconds}d -; - %{micro}d -; %e: an environment variable (same as $_ENV or $_SERVER) -; it must be associated with embraces to specify the name of the env -; variable. Some exemples: -; - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e -; - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e -; %f: script filename -; %l: content-length of the request (for POST request only) -; %m: request method -; %M: peak of memory allocated by PHP -; it can accept the following format: -; - %{bytes}M (default) -; - %{kilobytes}M -; - %{kilo}M -; - %{megabytes}M -; - %{mega}M -; %n: pool name -; %o: output header -; it must be associated with embraces to specify the name of the header: -; - %{Content-Type}o -; - %{X-Powered-By}o -; - %{Transfert-Encoding}o -; - .... -; %p: PID of the child that serviced the request -; %P: PID of the parent of the child that serviced the request -; %q: the query string -; %Q: the '?' character if query string exists -; %r: the request URI (without the query string, see %q and %Q) -; %R: remote IP address -; %s: status (response code) -; %t: server time the request was received -; it can accept a strftime(3) format: -; %d/%b/%Y:%H:%M:%S %z (default) -; The strftime(3) format must be encapsuled in a %{}t tag -; e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t -; %T: time the log has been written (the request has finished) -; it can accept a strftime(3) format: -; %d/%b/%Y:%H:%M:%S %z (default) -; The strftime(3) format must be encapsuled in a %{}t tag -; e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t -; %u: remote user -; -; Default: "%R - %u %t \"%m %r\" %s" -;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%" - -; The log file for slow requests -; Default Value: not set -; Note: slowlog is mandatory if request_slowlog_timeout is set -;slowlog = log/$pool.log.slow - -; The timeout for serving a single request after which a PHP backtrace will be -; dumped to the 'slowlog' file. A value of '0s' means 'off'. -; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) -; Default Value: 0 -;request_slowlog_timeout = 0 - -; The timeout for serving a single request after which the worker process will -; be killed. This option should be used when the 'max_execution_time' ini option -; does not stop script execution for some reason. A value of '0' means 'off'. -; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) -; Default Value: 0 -request_terminate_timeout = 1d - -; Set open file descriptor rlimit. -; Default Value: system defined value -;rlimit_files = 1024 - -; Set max core size rlimit. -; Possible Values: 'unlimited' or an integer greater or equal to 0 -; Default Value: system defined value -;rlimit_core = 0 - -; Chroot to this directory at the start. This value must be defined as an -; absolute path. When this value is not set, chroot is not used. -; Note: you can prefix with '$prefix' to chroot to the pool prefix or one -; of its subdirectories. If the pool prefix is not set, the global prefix -; will be used instead. -; Note: chrooting is a great security feature and should be used whenever -; possible. However, all PHP paths will be relative to the chroot -; (error_log, sessions.save_path, ...). -; Default Value: not set -;chroot = - -; Chdir to this directory at the start. -; Note: relative path can be used. -; Default Value: current directory or / when chroot -chdir = __INSTALL_DIR__ - -; Redirect worker stdout and stderr into main error log. If not set, stdout and -; stderr will be redirected to /dev/null according to FastCGI specs. -; Note: on highloaded environement, this can cause some delay in the page -; process time (several ms). -; Default Value: no -;catch_workers_output = yes - -; Clear environment in FPM workers -; Prevents arbitrary environment variables from reaching FPM worker processes -; by clearing the environment in workers before env vars specified in this -; pool configuration are added. -; Setting to "no" will make all environment variables available to PHP code -; via getenv(), $_ENV and $_SERVER. -; Default Value: yes -;clear_env = no - -; Limits the extensions of the main script FPM will allow to parse. This can -; prevent configuration mistakes on the web server side. You should only limit -; FPM to .php extensions to prevent malicious users to use other extensions to -; execute php code. -; Note: set an empty value to allow all extensions. -; Default Value: .php -;security.limit_extensions = .php .php3 .php4 .php5 .php7 - -; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from -; the current environment. -; Default Value: clean env -;env[HOSTNAME] = $HOSTNAME -;env[PATH] = /usr/local/bin:/usr/bin:/bin -;env[TMP] = /tmp -;env[TMPDIR] = /tmp -;env[TEMP] = /tmp - -; Additional php.ini defines, specific to this pool of workers. These settings -; overwrite the values previously defined in the php.ini. The directives are the -; same as the PHP SAPI: -; php_value/php_flag - you can set classic ini defines which can -; be overwritten from PHP call 'ini_set'. -; php_admin_value/php_admin_flag - these directives won't be overwritten by -; PHP call 'ini_set' -; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no. - -; Defining 'extension' will load the corresponding shared extension from -; extension_dir. Defining 'disable_functions' or 'disable_classes' will not -; overwrite previously defined php.ini values, but will append the new value -; instead. - -; Note: path INI options can be relative and will be expanded with the prefix -; (pool, global or /usr) - -; Default Value: nothing is defined by default except the values in php.ini and -; specified at startup with the -d argument -;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com -;php_flag[display_errors] = off -;php_admin_value[error_log] = /var/log/fpm-php.www.log -;php_admin_flag[log_errors] = on -;php_admin_value[memory_limit] = 32M - -; Common values to change to increase file upload limit -; php_admin_value[upload_max_filesize] = 50M -; php_admin_value[post_max_size] = 50M -; php_admin_flag[mail.add_x_header] = Off - -; Other common parameters -; php_admin_value[max_execution_time] = 600 -; php_admin_value[max_input_time] = 300 -; php_admin_value[memory_limit] = 256M -; php_admin_flag[short_open_tag] = On diff --git a/manifest.toml b/manifest.toml index eda30f9..f48b25e 100644 --- a/manifest.toml +++ b/manifest.toml @@ -21,11 +21,14 @@ cpe = "cpe:2.3:a:dotclear:dotclear" fund = "https://dotclear.org/donate" [integration] -yunohost = ">= 11.0.0" +yunohost = ">= 11.2" architectures = "all" multi_instance = true + ldap = true + sso = false + disk = "50M" ram.build = "200M" ram.runtime = "50M" diff --git a/scripts/install b/scripts/install index 619e9c0..e4f1116 100755 --- a/scripts/install +++ b/scripts/install @@ -31,18 +31,13 @@ mkdir -p "$install_dir/"{cache,public} setfacl -m d:u:www-data:rwx "$install_dir/"{cache,public} #================================================= -# NGINX CONFIGURATION +# SYSTEM CONFIGURATION #================================================= -ynh_script_progression --message="Configuring NGINX web server..." +ynh_script_progression --message="Adding system configurations related to $app..." --weight=1 # Create a dedicated NGINX config ynh_add_nginx_config -#================================================= -# PHP-FPM CONFIGURATION -#================================================= -ynh_script_progression --message="Configuring PHP-FPM..." --weight=2 - # Create a dedicated PHP-FPM config ynh_add_fpm_config diff --git a/scripts/remove b/scripts/remove index 768ea30..8fa8f5b 100755 --- a/scripts/remove +++ b/scripts/remove @@ -10,26 +10,16 @@ source _common.sh source /usr/share/yunohost/helpers #================================================= -# REMOVE NGINX CONFIGURATION +# REMOVE SYSTEM CONFIGURATIONS #================================================= -ynh_script_progression --message="Removing NGINX web server configuration..." +ynh_script_progression --message="Removing system configurations related to $app..." --weight=1 # Remove the dedicated NGINX config ynh_remove_nginx_config -#================================================= -# REMOVE PHP-FPM CONFIGURATION -#================================================= -ynh_script_progression --message="Removing PHP-FPM configuration..." - # Remove the dedicated PHP-FPM config ynh_remove_fpm_config -#================================================= -# REMOVE FAIL2BAN CONFIGURATION -#================================================= -ynh_script_progression --message="Removing Fail2Ban configuration..." - # Remove the dedicated Fail2Ban config ynh_remove_fail2ban_config diff --git a/scripts/restore b/scripts/restore index ee62cc6..c386eb2 100755 --- a/scripts/restore +++ b/scripts/restore @@ -10,15 +10,6 @@ source ../settings/scripts/_common.sh source /usr/share/yunohost/helpers -#================================================= -# STANDARD RESTORATION STEPS -#================================================= -# RESTORE THE NGINX CONFIGURATION -#================================================= -ynh_script_progression --message="Restoring the NGINX configuration..." - -ynh_restore_file --origin_path="/etc/nginx/conf.d/$domain.d/$app.conf" - #================================================= # RESTORE THE APP MAIN DIR #================================================= @@ -26,7 +17,6 @@ ynh_script_progression --message="Restoring the app main directory..." ynh_restore_file --origin_path="$install_dir" -chmod 750 "$install_dir" chmod -R o-rwx "$install_dir" chown -R $app:www-data "$install_dir" @@ -34,24 +24,6 @@ chown -R $app:www-data "$install_dir" mkdir -p "$install_dir/"{cache,public} setfacl -m d:u:www-data:rwx "$install_dir/"{cache,public} -#================================================= -# RESTORE THE PHP-FPM CONFIGURATION -#================================================= -ynh_script_progression --message="Restoring the PHP-FPM configuration..." - -ynh_restore_file --origin_path="/etc/php/$phpversion/fpm/pool.d/$app.conf" - -#================================================= -# RESTORE FAIL2BAN CONFIGURATION -#================================================= -ynh_script_progression --message="Restoring the Fail2Ban configuration..." - -ynh_restore_file --origin_path="/etc/fail2ban/jail.d/$app.conf" -ynh_restore_file --origin_path="/etc/fail2ban/filter.d/$app.conf" -ynh_systemd_action --action=restart --service_name=fail2ban - -#================================================= -# SPECIFIC RESTORATION #================================================= # RESTORE THE MYSQL DATABASE #================================================= @@ -59,6 +31,21 @@ ynh_script_progression --message="Restoring the MySQL database..." --weight=3 ynh_mysql_connect_as --user=$db_user --password=$db_pwd --database=$db_name < ./db.sql +#================================================= +# RESTORE SYSTEM CONFIGURATIONS +#================================================= +# RESTORE THE PHP-FPM CONFIGURATION +#================================================= +ynh_script_progression --message="Restoring system configurations related to $app..." --weight=1 + +ynh_restore_file --origin_path="/etc/php/$phpversion/fpm/pool.d/$app.conf" + +ynh_restore_file --origin_path="/etc/nginx/conf.d/$domain.d/$app.conf" + +ynh_restore_file --origin_path="/etc/fail2ban/jail.d/$app.conf" +ynh_restore_file --origin_path="/etc/fail2ban/filter.d/$app.conf" +ynh_systemd_action --action=restart --service_name=fail2ban + #================================================= # GENERIC FINALIZATION #================================================= diff --git a/scripts/upgrade b/scripts/upgrade index 93e457e..da82346 100644 --- a/scripts/upgrade +++ b/scripts/upgrade @@ -12,7 +12,6 @@ source /usr/share/yunohost/helpers #================================================= # CHECK VERSION #================================================= -ynh_script_progression --message="Checking version..." upgrade_type=$(ynh_check_app_version_changed) @@ -21,7 +20,7 @@ upgrade_type=$(ynh_check_app_version_changed) #================================================= # ENSURE DOWNWARD COMPATIBILITY #================================================= -ynh_script_progression --message="Ensuring downward compatibility..." +ynh_script_progression --message="Ensuring downward compatibility..." --weight=1 if [ -z "${blog_admin:-}" ] || [ -z "$blog_contentadmin" ] || @@ -73,7 +72,6 @@ then fi fi -chmod 750 "$install_dir" chmod -R o-rwx "$install_dir" chown -R $app:www-data "$install_dir" @@ -82,18 +80,13 @@ mkdir -p "$install_dir/"{cache,public} setfacl -m d:u:www-data:rwx "$install_dir/"{cache,public} #================================================= -# NGINX CONFIGURATION +# REAPPLY SYSTEM CONFIGURATIONS #================================================= -ynh_script_progression --message="Upgrading NGINX web server configuration..." +ynh_script_progression --message="Upgrading system configurations related to $app..." --weight=1 # Create a dedicated NGINX config ynh_add_nginx_config -#================================================= -# PHP-FPM CONFIGURATION -#================================================= -ynh_script_progression --message="Upgrading PHP-FPM configuration..." --weight=2 - # Create a dedicated PHP-FPM config ynh_add_fpm_config @@ -102,7 +95,7 @@ ynh_add_fpm_config #================================================= # UPDATE A CONFIG FILE #================================================= -ynh_script_progression --message="Updating a configuration file..." +ynh_script_progression --message="Updating a configuration file..." --weight=1 php_config=$install_dir/inc/config.php @@ -153,7 +146,7 @@ ynh_local_curl $adminUrl #================================================= # UPGRADE FAIL2BAN #================================================= -ynh_script_progression --message="Reconfiguring Fail2Ban..." +ynh_script_progression --message="Reconfiguring Fail2Ban..." --weight=1 # Create a dedicated Fail2Ban config ynh_add_fail2ban_config --logpath="/var/log/nginx/${domain}-error.log" --failregex="Invalid credentials in $install_dir/inc/class.auth.ldap.php .* client: , .*https://$domain${path%/}/admin/auth.php"