diff --git a/conf/nginx.conf b/conf/nginx.conf index dd58121..f9fefba 100644 --- a/conf/nginx.conf +++ b/conf/nginx.conf @@ -58,7 +58,7 @@ location __PATH__/ { location ~ '[^/]\.php$|^/update.php' { fastcgi_split_path_info ^(.+?\.php)(/.*)$; - fastcgi_pass unix:/var/run/php/php7.3-fpm-__NAME__.sock; + fastcgi_pass unix:/var/run/php/php__PHPVERSION__-fpm-__NAME__.sock; fastcgi_index index.php; include fastcgi_params; @@ -90,4 +90,4 @@ location __PATH__/ { location @rewrite { rewrite ^/(.*)$ /index.php?q=$1; -} \ No newline at end of file +} diff --git a/conf/php-fpm.conf b/conf/php-fpm.conf deleted file mode 100644 index 4b682a3..0000000 --- a/conf/php-fpm.conf +++ /dev/null @@ -1,430 +0,0 @@ -; Start a new pool named 'www'. -; the variable $pool can be used in any directive and will be replaced by the -; pool name ('www' here) -[__NAMETOCHANGE__] - -; Per pool prefix -; It only applies on the following directives: -; - 'access.log' -; - 'slowlog' -; - 'listen' (unixsocket) -; - 'chroot' -; - 'chdir' -; - 'php_values' -; - 'php_admin_values' -; When not set, the global prefix (or /usr) applies instead. -; Note: This directive can also be relative to the global prefix. -; Default Value: none -;prefix = /path/to/pools/$pool - -; Unix user/group of processes -; Note: The user is mandatory. If the group is not set, the default user's group -; will be used. -user = __USER__ -group = __USER__ - -; The address on which to accept FastCGI requests. -; Valid syntaxes are: -; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific IPv4 address on -; a specific port; -; '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on -; a specific port; -; 'port' - to listen on a TCP socket to all addresses -; (IPv6 and IPv4-mapped) on a specific port; -; '/path/to/unix/socket' - to listen on a unix socket. -; Note: This value is mandatory. -listen = /var/run/php/php7.3-fpm-__NAMETOCHANGE__.sock - -; Set listen(2) backlog. -; Default Value: 511 (-1 on FreeBSD and OpenBSD) -;listen.backlog = 511 - -; Set permissions for unix socket, if one is used. In Linux, read/write -; permissions must be set in order to allow connections from a web server. Many -; BSD-derived systems allow connections regardless of permissions. -; Default Values: user and group are set as the running user -; mode is set to 0660 -listen.owner = www-data -listen.group = www-data -;listen.mode = 0660 -; When POSIX Access Control Lists are supported you can set them using -; these options, value is a comma separated list of user/group names. -; When set, listen.owner and listen.group are ignored -;listen.acl_users = -;listen.acl_groups = - -; List of addresses (IPv4/IPv6) of FastCGI clients which are allowed to connect. -; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original -; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address -; must be separated by a comma. If this value is left blank, connections will be -; accepted from any ip address. -; Default Value: any -;listen.allowed_clients = 127.0.0.1 - -; Specify the nice(2) priority to apply to the pool processes (only if set) -; The value can vary from -19 (highest priority) to 20 (lower priority) -; Note: - It will only work if the FPM master process is launched as root -; - The pool processes will inherit the master process priority -; unless it specified otherwise -; Default Value: no set -; process.priority = -19 - -; Set the process dumpable flag (PR_SET_DUMPABLE prctl) even if the process user -; or group is differrent than the master process user. It allows to create process -; core dump and ptrace the process for the pool user. -; Default Value: no -; process.dumpable = yes - -; Choose how the process manager will control the number of child processes. -; Possible Values: -; static - a fixed number (pm.max_children) of child processes; -; dynamic - the number of child processes are set dynamically based on the -; following directives. With this process management, there will be -; always at least 1 children. -; pm.max_children - the maximum number of children that can -; be alive at the same time. -; pm.start_servers - the number of children created on startup. -; pm.min_spare_servers - the minimum number of children in 'idle' -; state (waiting to process). If the number -; of 'idle' processes is less than this -; number then some children will be created. -; pm.max_spare_servers - the maximum number of children in 'idle' -; state (waiting to process). If the number -; of 'idle' processes is greater than this -; number then some children will be killed. -; ondemand - no children are created at startup. Children will be forked when -; new requests will connect. The following parameter are used: -; pm.max_children - the maximum number of children that -; can be alive at the same time. -; pm.process_idle_timeout - The number of seconds after which -; an idle process will be killed. -; Note: This value is mandatory. -pm = dynamic - -; The number of child processes to be created when pm is set to 'static' and the -; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'. -; This value sets the limit on the number of simultaneous requests that will be -; served. Equivalent to the ApacheMaxClients directive with mpm_prefork. -; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP -; CGI. The below defaults are based on a server without much resources. Don't -; forget to tweak pm.* to fit your needs. -; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand' -; Note: This value is mandatory. -pm.max_children = 5 - -; The number of child processes created on startup. -; Note: Used only when pm is set to 'dynamic' -; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2 -pm.start_servers = 2 - -; The desired minimum number of idle server processes. -; Note: Used only when pm is set to 'dynamic' -; Note: Mandatory when pm is set to 'dynamic' -pm.min_spare_servers = 1 - -; The desired maximum number of idle server processes. -; Note: Used only when pm is set to 'dynamic' -; Note: Mandatory when pm is set to 'dynamic' -pm.max_spare_servers = 3 - -; The number of seconds after which an idle process will be killed. -; Note: Used only when pm is set to 'ondemand' -; Default Value: 10s -;pm.process_idle_timeout = 10s; - -; The number of requests each child process should execute before respawning. -; This can be useful to work around memory leaks in 3rd party libraries. For -; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS. -; Default Value: 0 -;pm.max_requests = 500 - -; The URI to view the FPM status page. If this value is not set, no URI will be -; recognized as a status page. It shows the following informations: -; pool - the name of the pool; -; process manager - static, dynamic or ondemand; -; start time - the date and time FPM has started; -; start since - number of seconds since FPM has started; -; accepted conn - the number of request accepted by the pool; -; listen queue - the number of request in the queue of pending -; connections (see backlog in listen(2)); -; max listen queue - the maximum number of requests in the queue -; of pending connections since FPM has started; -; listen queue len - the size of the socket queue of pending connections; -; idle processes - the number of idle processes; -; active processes - the number of active processes; -; total processes - the number of idle + active processes; -; max active processes - the maximum number of active processes since FPM -; has started; -; max children reached - number of times, the process limit has been reached, -; when pm tries to start more children (works only for -; pm 'dynamic' and 'ondemand'); -; Value are updated in real time. -; Example output: -; pool: www -; process manager: static -; start time: 01/Jul/2011:17:53:49 +0200 -; start since: 62636 -; accepted conn: 190460 -; listen queue: 0 -; max listen queue: 1 -; listen queue len: 42 -; idle processes: 4 -; active processes: 11 -; total processes: 15 -; max active processes: 12 -; max children reached: 0 -; -; By default the status page output is formatted as text/plain. Passing either -; 'html', 'xml' or 'json' in the query string will return the corresponding -; output syntax. Example: -; http://www.foo.bar/status -; http://www.foo.bar/status?json -; http://www.foo.bar/status?html -; http://www.foo.bar/status?xml -; -; By default the status page only outputs short status. Passing 'full' in the -; query string will also return status for each pool process. -; Example: -; http://www.foo.bar/status?full -; http://www.foo.bar/status?json&full -; http://www.foo.bar/status?html&full -; http://www.foo.bar/status?xml&full -; The Full status returns for each process: -; pid - the PID of the process; -; state - the state of the process (Idle, Running, ...); -; start time - the date and time the process has started; -; start since - the number of seconds since the process has started; -; requests - the number of requests the process has served; -; request duration - the duration in µs of the requests; -; request method - the request method (GET, POST, ...); -; request URI - the request URI with the query string; -; content length - the content length of the request (only with POST); -; user - the user (PHP_AUTH_USER) (or '-' if not set); -; script - the main script called (or '-' if not set); -; last request cpu - the %cpu the last request consumed -; it's always 0 if the process is not in Idle state -; because CPU calculation is done when the request -; processing has terminated; -; last request memory - the max amount of memory the last request consumed -; it's always 0 if the process is not in Idle state -; because memory calculation is done when the request -; processing has terminated; -; If the process is in Idle state, then informations are related to the -; last request the process has served. Otherwise informations are related to -; the current request being served. -; Example output: -; ************************ -; pid: 31330 -; state: Running -; start time: 01/Jul/2011:17:53:49 +0200 -; start since: 63087 -; requests: 12808 -; request duration: 1250261 -; request method: GET -; request URI: /test_mem.php?N=10000 -; content length: 0 -; user: - -; script: /home/fat/web/docs/php/test_mem.php -; last request cpu: 0.00 -; last request memory: 0 -; -; Note: There is a real-time FPM status monitoring sample web page available -; It's available in: /usr/share/php/7.0/fpm/status.html -; -; Note: The value must start with a leading slash (/). The value can be -; anything, but it may not be a good idea to use the .php extension or it -; may conflict with a real PHP file. -; Default Value: not set -;pm.status_path = /status - -; The ping URI to call the monitoring page of FPM. If this value is not set, no -; URI will be recognized as a ping page. This could be used to test from outside -; that FPM is alive and responding, or to -; - create a graph of FPM availability (rrd or such); -; - remove a server from a group if it is not responding (load balancing); -; - trigger alerts for the operating team (24/7). -; Note: The value must start with a leading slash (/). The value can be -; anything, but it may not be a good idea to use the .php extension or it -; may conflict with a real PHP file. -; Default Value: not set -;ping.path = /ping - -; This directive may be used to customize the response of a ping request. The -; response is formatted as text/plain with a 200 response code. -; Default Value: pong -;ping.response = pong - -; The access log file -; Default: not set -;access.log = log/$pool.access.log - -; The access log format. -; The following syntax is allowed -; %%: the '%' character -; %C: %CPU used by the request -; it can accept the following format: -; - %{user}C for user CPU only -; - %{system}C for system CPU only -; - %{total}C for user + system CPU (default) -; %d: time taken to serve the request -; it can accept the following format: -; - %{seconds}d (default) -; - %{miliseconds}d -; - %{mili}d -; - %{microseconds}d -; - %{micro}d -; %e: an environment variable (same as $_ENV or $_SERVER) -; it must be associated with embraces to specify the name of the env -; variable. Some exemples: -; - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e -; - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e -; %f: script filename -; %l: content-length of the request (for POST request only) -; %m: request method -; %M: peak of memory allocated by PHP -; it can accept the following format: -; - %{bytes}M (default) -; - %{kilobytes}M -; - %{kilo}M -; - %{megabytes}M -; - %{mega}M -; %n: pool name -; %o: output header -; it must be associated with embraces to specify the name of the header: -; - %{Content-Type}o -; - %{X-Powered-By}o -; - %{Transfert-Encoding}o -; - .... -; %p: PID of the child that serviced the request -; %P: PID of the parent of the child that serviced the request -; %q: the query string -; %Q: the '?' character if query string exists -; %r: the request URI (without the query string, see %q and %Q) -; %R: remote IP address -; %s: status (response code) -; %t: server time the request was received -; it can accept a strftime(3) format: -; %d/%b/%Y:%H:%M:%S %z (default) -; The strftime(3) format must be encapsuled in a %{}t tag -; e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t -; %T: time the log has been written (the request has finished) -; it can accept a strftime(3) format: -; %d/%b/%Y:%H:%M:%S %z (default) -; The strftime(3) format must be encapsuled in a %{}t tag -; e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t -; %u: remote user -; -; Default: "%R - %u %t \"%m %r\" %s" -;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%" - -; The log file for slow requests -; Default Value: not set -; Note: slowlog is mandatory if request_slowlog_timeout is set -;slowlog = log/$pool.log.slow - -; The timeout for serving a single request after which a PHP backtrace will be -; dumped to the 'slowlog' file. A value of '0s' means 'off'. -; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) -; Default Value: 0 -;request_slowlog_timeout = 0 - -; The timeout for serving a single request after which the worker process will -; be killed. This option should be used when the 'max_execution_time' ini option -; does not stop script execution for some reason. A value of '0' means 'off'. -; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) -; Default Value: 0 -request_terminate_timeout = 1d - -; Set open file descriptor rlimit. -; Default Value: system defined value -;rlimit_files = 1024 - -; Set max core size rlimit. -; Possible Values: 'unlimited' or an integer greater or equal to 0 -; Default Value: system defined value -;rlimit_core = 0 - -; Chroot to this directory at the start. This value must be defined as an -; absolute path. When this value is not set, chroot is not used. -; Note: you can prefix with '$prefix' to chroot to the pool prefix or one -; of its subdirectories. If the pool prefix is not set, the global prefix -; will be used instead. -; Note: chrooting is a great security feature and should be used whenever -; possible. However, all PHP paths will be relative to the chroot -; (error_log, sessions.save_path, ...). -; Default Value: not set -;chroot = - -; Chdir to this directory at the start. -; Note: relative path can be used. -; Default Value: current directory or / when chroot -chdir = __FINALPATH__/__NAMETOCHANGE__ - -; Redirect worker stdout and stderr into main error log. If not set, stdout and -; stderr will be redirected to /dev/null according to FastCGI specs. -; Note: on highloaded environement, this can cause some delay in the page -; process time (several ms). -; Default Value: no -;catch_workers_output = yes - -; Clear environment in FPM workers -; Prevents arbitrary environment variables from reaching FPM worker processes -; by clearing the environment in workers before env vars specified in this -; pool configuration are added. -; Setting to "no" will make all environment variables available to PHP code -; via getenv(), $_ENV and $_SERVER. -; Default Value: yes -;clear_env = no - -; Limits the extensions of the main script FPM will allow to parse. This can -; prevent configuration mistakes on the web server side. You should only limit -; FPM to .php extensions to prevent malicious users to use other extensions to -; execute php code. -; Note: set an empty value to allow all extensions. -; Default Value: .php -;security.limit_extensions = .php .php3 .php4 .php5 .php7 - -; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from -; the current environment. -; Default Value: clean env -;env[HOSTNAME] = $HOSTNAME -;env[PATH] = /usr/local/bin:/usr/bin:/bin -;env[TMP] = /tmp -;env[TMPDIR] = /tmp -;env[TEMP] = /tmp - -; Additional php.ini defines, specific to this pool of workers. These settings -; overwrite the values previously defined in the php.ini. The directives are the -; same as the PHP SAPI: -; php_value/php_flag - you can set classic ini defines which can -; be overwritten from PHP call 'ini_set'. -; php_admin_value/php_admin_flag - these directives won't be overwritten by -; PHP call 'ini_set' -; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no. - -; Defining 'extension' will load the corresponding shared extension from -; extension_dir. Defining 'disable_functions' or 'disable_classes' will not -; overwrite previously defined php.ini values, but will append the new value -; instead. - -; Note: path INI options can be relative and will be expanded with the prefix -; (pool, global or /usr) - -; Default Value: nothing is defined by default except the values in php.ini and -; specified at startup with the -d argument -;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com -;php_flag[display_errors] = off -;php_admin_value[error_log] = /var/log/fpm-php.www.log -;php_admin_flag[log_errors] = on -;php_admin_value[memory_limit] = 32M - -; Common values to change to increase file upload limit -; php_admin_value[upload_max_filesize] = 50M -; php_admin_value[post_max_size] = 50M -; php_admin_flag[mail.add_x_header] = Off - -; Other common parameters -; php_admin_value[max_execution_time] = 600 -; php_admin_value[max_input_time] = 300 -; php_admin_value[memory_limit] = 256M -; php_admin_flag[short_open_tag] = On diff --git a/manifest.json b/manifest.json index cd5f170..4e0fe6e 100644 --- a/manifest.json +++ b/manifest.json @@ -13,7 +13,7 @@ "name": "yalh76" }, "requirements": { - "yunohost": ">= 3.5" + "yunohost": ">= 3.8" }, "multi_instance": true, "services": [ diff --git a/scripts/_common.sh b/scripts/_common.sh index e03392b..0fc0bdf 100644 --- a/scripts/_common.sh +++ b/scripts/_common.sh @@ -7,7 +7,11 @@ # dependencies used by the app pkg_dependencies="curl" -extra_pkg_dependencies="php7.3-fpm php7.3-cli php7.3-gd php7.3-mysql php7.3-xml php7.3-ldap php7.3-mbstring php7.3-json php7.3-simplexml php7.3-curl" +swap_needed=512 + +YNH_PHP_VERSION="7.3" + +extra_php_dependencies="php${YNH_PHP_VERSION}-fpm php${YNH_PHP_VERSION}-cli php${YNH_PHP_VERSION}-gd php${YNH_PHP_VERSION}-mysql php${YNH_PHP_VERSION}-xml php${YNH_PHP_VERSION}-ldap php${YNH_PHP_VERSION}-mbstring php${YNH_PHP_VERSION}-json php${YNH_PHP_VERSION}-simplexml php${YNH_PHP_VERSION}-curl" #================================================= # PERSONAL HELPERS diff --git a/scripts/backup b/scripts/backup index 688b099..fb90b69 100644 --- a/scripts/backup +++ b/scripts/backup @@ -53,7 +53,7 @@ ynh_backup --src_path="/etc/nginx/conf.d/$domain.d/$app.conf" #================================================= ynh_print_info --message="Backing up php-fpm configuration..." -ynh_backup --src_path="/etc/php/7.3/fpm/pool.d/$app.conf" +ynh_backup --src_path="/etc/php/${YNH_PHP_VERSION}/fpm/pool.d/$app.conf" #================================================= # BACKUP THE MYSQL DATABASE diff --git a/scripts/install b/scripts/install index 00bb993..ccec676 100644 --- a/scripts/install +++ b/scripts/install @@ -7,8 +7,6 @@ #================================================= source _common.sh -source ynh_add_extra_apt_repos__3 -source ynh_install_php__3 source ynh_composer__2 source ynh_add_swap source /usr/share/yunohost/helpers @@ -65,17 +63,6 @@ ynh_app_setting_set --app=$app --key=install_profil --value=$install_profil #================================================= # STANDARD MODIFICATIONS -#================================================= -# INSTALL PHP7.3 -#================================================= - -if [ "$(lsb_release --codename --short)" = "buster" ]; then - pkg_dependencies="$pkg_dependencies $extra_pkg_dependencies" -else - ynh_print_info --message="Installing PHP7.3..." - ynh_install_php --phpversion="7.3" --package="$extra_pkg_dependencies" -fi - #================================================= # INSTALL DEPENDENCIES #================================================= @@ -102,6 +89,8 @@ ynh_app_setting_set --app=$app --key=final_path --value=$final_path # Download, check integrity, uncompress and patch the source from app.src ynh_setup_source --dest_dir="$final_path" +mkdir -p "$final_path/$app" + #================================================= # NGINX CONFIGURATION #================================================= @@ -118,6 +107,14 @@ ynh_print_info --message="Configuring system user..." # Create a system user ynh_system_user_create --username=$app --home_dir="$final_path" +#================================================= +# PHP-FPM CONFIGURATION +#================================================= +ynh_print_info --message="Configuring php-fpm..." + +# Create a dedicated php-fpm config +ynh_add_fpm_config --usage=low --footprint=low --package="$extra_php_dependencies" + #================================================= # SPECIFIC SETUP #================================================= @@ -125,7 +122,7 @@ ynh_system_user_create --username=$app --home_dir="$final_path" #================================================= ynh_print_info --message="Adding swap..." -ynh_add_swap --size=512 +ynh_add_swap --size=$swap_needed #================================================= # CREATE DRUSH ALIAS @@ -151,7 +148,7 @@ mkdir -p "$final_path/.composer" cp -f "../conf/composer.json" "$final_path/composer.json" ynh_replace_string --match_string="__APP__" --replace_string="$app" --target_file="$final_path/composer.json" -ynh_install_composer --phpversion="7.3" --workdir="$final_path" +ynh_install_composer --phpversion="${YNH_PHP_VERSION}" --workdir="$final_path" export PATH="$final_path/vendor/bin:$PATH" @@ -162,13 +159,13 @@ ynh_print_info --message="Installing Drupal..." chown -R $app: $final_path -update-alternatives --set php /usr/bin/php7.3 +update-alternatives --set php /usr/bin/php${YNH_PHP_VERSION} -pushd "$final_path" +pushd "$final_path" sudo -u $app env PATH=$PATH drush site:install $install_profil --account-name=$admin --account-pass=$password --account-mail=$admin_mail --db-url=mysql://$db_user:$db_pwd@localhost/$db_name --site-name="$app" --locale=$language --yes popd -update-alternatives --set php /usr/bin/php7.0 +update-alternatives --set php /usr/bin/php${YNH_DEFAULT_PHP_VERSION} #================================================= # SETUP THE CRON FILE @@ -190,14 +187,6 @@ ynh_store_file_checksum --file="$final_path/$app/sites/default/settings.php" #================================================= # GENERIC FINALIZATION -#================================================= -# PHP-FPM CONFIGURATION -#================================================= -ynh_print_info --message="Configuring php-fpm..." - -# Create a dedicated php-fpm config -ynh_add_fpm_config --phpversion="7.3" - #================================================= # SECURE FILES AND DIRECTORIES #================================================= diff --git a/scripts/remove b/scripts/remove index 2f689cc..f07a4a6 100644 --- a/scripts/remove +++ b/scripts/remove @@ -7,8 +7,6 @@ #================================================= source _common.sh -source ynh_add_extra_apt_repos__3 -source ynh_install_php__3 source ynh_add_swap source /usr/share/yunohost/helpers @@ -34,15 +32,6 @@ ynh_print_info --message="Removing the MySQL database..." # Remove a database if it exists, along with the associated user ynh_mysql_remove_db --db_user=$db_user --db_name=$db_name -#================================================= -# REMOVE PHP -#================================================= - -if [ "$(lsb_release --codename --short)" != "buster" ]; then - ynh_print_info --message="Removing php..." - ynh_remove_php -fi - #================================================= # REMOVE DEPENDENCIES #================================================= diff --git a/scripts/restore b/scripts/restore index ef098fa..cf4c0a9 100644 --- a/scripts/restore +++ b/scripts/restore @@ -8,8 +8,6 @@ #Keep this path for calling _common.sh inside the execution's context of backup and restore scripts source ../settings/scripts/_common.sh -source ../settings/scripts/ynh_add_extra_apt_repos__3 -source ../settings/scripts/ynh_install_php__3 source ../settings/scripts/ynh_add_swap source /usr/share/yunohost/helpers @@ -79,19 +77,19 @@ ynh_print_info --message="Restoring user rights..." # Restore permissions on app files chown -R $app: $final_path +#================================================= +# RESTORE THE PHP-FPM CONFIGURATION +#================================================= +ynh_print_info --message="Restoring PHP-FPM configuration..." + +# Restore the file first, so it can have a backup if different +ynh_restore_file --origin_path="/etc/php/${YNH_PHP_VERSION}/fpm/pool.d/$app.conf" + +# Recreate a dedicated php-fpm config +ynh_add_fpm_config --usage=low --footprint=low --package="$extra_php_dependencies" + #================================================= # SPECIFIC RESTORATION -#================================================= -# REINSTALL PHP7.3 -#================================================= - -if [ "$(lsb_release --codename --short)" = "buster" ]; then - pkg_dependencies="$pkg_dependencies $extra_pkg_dependencies" -else - ynh_print_info --message="Reinstalling PHP7.3..." - ynh_install_php --phpversion="7.3" --package="$extra_pkg_dependencies" -fi - #================================================= # REINSTALL DEPENDENCIES #================================================= @@ -109,13 +107,6 @@ db_pwd=$(ynh_app_setting_get --app=$app --key=mysqlpwd) ynh_mysql_setup_db --db_user=$db_user --db_name=$db_name --db_pwd=$db_pwd ynh_mysql_connect_as --user=$db_user --password=$db_pwd --database=$db_name < ./db.sql -#================================================= -# RESTORE THE PHP-FPM CONFIGURATION -#================================================= -ynh_print_info --message="Restoring PHP-FPM configuration..." - -ynh_restore_file --origin_path="/etc/php/7.3/fpm/pool.d/$app.conf" - #================================================= # RESTORE THE CRON FILE #================================================= @@ -127,7 +118,7 @@ ynh_restore_file --origin_path="/etc/cron.d/$app" #================================================= ynh_print_info --message="Adding swap..." -ynh_add_swap --size=512 +ynh_add_swap --size=$swap_needed #================================================= # GENERIC FINALIZATION @@ -136,7 +127,7 @@ ynh_add_swap --size=512 #================================================= ynh_print_info --message="Reloading nginx web server and php-fpm..." -ynh_systemd_action --service_name=php7.3-fpm --action=reload +ynh_systemd_action --service_name=php${YNH_PHP_VERSION}-fpm --action=reload ynh_systemd_action --service_name=nginx --action=reload #================================================= diff --git a/scripts/upgrade b/scripts/upgrade index 4de149f..7b02b6f 100644 --- a/scripts/upgrade +++ b/scripts/upgrade @@ -7,8 +7,6 @@ #================================================= source _common.sh -source ynh_add_extra_apt_repos__3 -source ynh_install_php__3 source ynh_composer__2 source ynh_add_swap source /usr/share/yunohost/helpers @@ -85,24 +83,6 @@ ynh_print_info --message="Upgrading nginx web server configuration..." # Create a dedicated nginx config ynh_add_nginx_config -#================================================= -# UPGRADE PHP7.3 -#================================================= - -if [ "$(lsb_release --codename --short)" = "buster" ]; then - pkg_dependencies="$pkg_dependencies $extra_pkg_dependencies" -else - if [ "$(ynh_app_setting_get --app=$app --key=php_version)" != "7.3" ]; then - ynh_print_info --message="Upgrading PHP7.3..." - ynh_remove_fpm_config - ynh_remove_app_dependencies - ynh_remove_php - ynh_install_php --phpversion="7.3" --package="$extra_pkg_dependencies" - else - ynh_install_php --phpversion="7.3" --package="$extra_pkg_dependencies" - fi -fi - #================================================= # UPGRADE DEPENDENCIES #================================================= @@ -124,7 +104,7 @@ ynh_system_user_create --username=$app --home_dir="$final_path" ynh_print_info --message="Upgrading php-fpm configuration..." # Create a dedicated php-fpm config -ynh_add_fpm_config --phpversion="7.3" +ynh_add_fpm_config --usage=low --footprint=low --package="$extra_php_dependencies" #================================================= # SPECIFIC UPGRADE @@ -133,16 +113,16 @@ ynh_add_fpm_config --phpversion="7.3" #================================================= ynh_print_info --message="Adding swap..." -ynh_add_swap --size=512 +ynh_add_swap --size=$swap_needed #================================================= # UPGRADE COMPOSER #================================================= ynh_print_info --message="Upgrading Composer..." -update-alternatives --set php /usr/bin/php7.3 -ynh_install_composer --phpversion="7.3" --workdir="$final_path" -update-alternatives --set php /usr/bin/php7.0 +ynh_install_composer --phpversion="${YNH_PHP_VERSION}" --workdir="$final_path" + +export PATH="$final_path/vendor/bin:$PATH" #================================================= # UPGRADE DRUPAL @@ -150,26 +130,19 @@ update-alternatives --set php /usr/bin/php7.0 ynh_print_info --message="Upgrading Drupal..." ynh_backup_if_checksum_is_different --file="$final_path/$app/sites/default/settings.php" -export PATH="$final_path/vendor/bin:$PATH" -#sudo -u $app env PATH=$PATH drush @$app.prod cache-clear all -#sudo -u $app env PATH=$PATH drush @$app.prod pm-update drupal -#sudo -u $app env PATH=$PATH drush @$app.prod cache-clear all -#sudo -u $app env PATH=$PATH drush @$app.prod l10n-update-refresh -#sudo -u $app env PATH=$PATH drush @$app.prod l10n-update - -update-alternatives --set php /usr/bin/php7.3 +update-alternatives --set php /usr/bin/php${YNH_PHP_VERSION} pushd "$final_path" sudo -u $app env PATH=$PATH drush @$app.prod state:set system.maintenance_mode 1 --input-format=integer - sudo -u $app env PATH=$PATH php7.3 composer.phar update drupal/core webflo/drupal-core-require-dev --with-dependencies - sudo -u $app env PATH=$PATH php7.3 composer.phar update --with-dependencies + sudo -u $app env PATH=$PATH php composer.phar update drupal/core webflo/drupal-core-require-dev --with-dependencies + sudo -u $app env PATH=$PATH php composer.phar update --with-dependencies sudo -u $app env PATH=$PATH drush @$app.prod -y updatedb sudo -u $app env PATH=$PATH drush @$app.prod cache:rebuild sudo -u $app env PATH=$PATH drush @$app.prod state:set system.maintenance_mode 0 --input-format=integer popd -update-alternatives --set php /usr/bin/php7.0 +update-alternatives --set php /usr/bin/php${YNH_DEFAULT_PHP_VERSION} #================================================= # STORE THE CONFIG FILE CHECKSUM @@ -209,7 +182,7 @@ ynh_print_info --message="Upgrading SSOwat configuration..." # Make app public if necessary if [ $is_public -eq 1 ] then - # unprotected_uris allows SSO credentials to be passed anyway + # unprotected_uris allows SSO credentials to be passed anyway. ynh_app_setting_set --app=$app --key=unprotected_uris --value="/" fi diff --git a/scripts/ynh_add_extra_apt_repos__3 b/scripts/ynh_add_extra_apt_repos__3 deleted file mode 100644 index 3276f00..0000000 --- a/scripts/ynh_add_extra_apt_repos__3 +++ /dev/null @@ -1,294 +0,0 @@ -#!/bin/bash - -# Pin a repository. -# -# usage: ynh_pin_repo --package=packages --pin=pin_filter [--priority=priority_value] [--name=name] [--append] -# | arg: -p, --package - Packages concerned by the pin. Or all, *. -# | arg: -i, --pin - Filter for the pin. -# | arg: -p, --priority - Priority for the pin -# | arg: -n, --name - Name for the files for this repo, $app as default value. -# | arg: -a, --append - Do not overwrite existing files. -# -# See https://manpages.debian.org/stretch/apt/apt_preferences.5.en.html for information about pinning. -# -ynh_pin_repo () { - # Declare an array to define the options of this helper. - local legacy_args=pirna - declare -Ar args_array=( [p]=package= [i]=pin= [r]=priority= [n]=name= [a]=append ) - local package - local pin - local priority - local name - local append - # Manage arguments with getopts - ynh_handle_getopts_args "$@" - package="${package:-*}" - priority=${priority:-50} - name="${name:-$app}" - append=${append:-0} - - if [ $append -eq 1 ] - then - append="tee -a" - else - append="tee" - fi - - mkdir -p "/etc/apt/preferences.d" - echo "Package: $package -Pin: $pin -Pin-Priority: $priority" \ - | $append "/etc/apt/preferences.d/$name" -} - -# Add a repository. -# -# usage: ynh_add_repo --uri=uri --suite=suite --component=component [--name=name] [--append] -# | arg: -u, --uri - Uri of the repository. -# | arg: -s, --suite - Suite of the repository. -# | arg: -c, --component - Component of the repository. -# | arg: -n, --name - Name for the files for this repo, $app as default value. -# | arg: -a, --append - Do not overwrite existing files. -# -# Example for a repo like deb http://forge.yunohost.org/debian/ stretch stable -# uri suite component -# ynh_add_repo --uri=http://forge.yunohost.org/debian/ --suite=stretch --component=stable -# -ynh_add_repo () { - # Declare an array to define the options of this helper. - local legacy_args=uscna - declare -Ar args_array=( [u]=uri= [s]=suite= [c]=component= [n]=name= [a]=append ) - local uri - local suite - local component - local name - local append - # Manage arguments with getopts - ynh_handle_getopts_args "$@" - name="${name:-$app}" - append=${append:-0} - - if [ $append -eq 1 ] - then - append="tee -a" - else - append="tee" - fi - - mkdir -p "/etc/apt/sources.list.d" - # Add the new repo in sources.list.d - echo "deb $uri $suite $component" \ - | $append "/etc/apt/sources.list.d/$name.list" -} - -# Add an extra repository correctly, pin it and get the key. -# -# usage: ynh_install_extra_repo --repo="repo" [--key=key_url] [--priority=priority_value] [--name=name] [--append] -# | arg: -r, --repo - Complete url of the extra repository. -# | arg: -k, --key - url to get the public key. -# | arg: -p, --priority - Priority for the pin -# | arg: -n, --name - Name for the files for this repo, $app as default value. -# | arg: -a, --append - Do not overwrite existing files. -ynh_install_extra_repo () { - # Declare an array to define the options of this helper. - local legacy_args=rkpna - declare -Ar args_array=( [r]=repo= [k]=key= [p]=priority= [n]=name= [a]=append ) - local repo - local key - local priority - local name - local append - # Manage arguments with getopts - ynh_handle_getopts_args "$@" - name="${name:-$app}" - append=${append:-0} - key=${key:-0} - priority=${priority:-} - - if [ $append -eq 1 ] - then - append="--append" - wget_append="tee -a" - else - append="" - wget_append="tee" - fi - - # Split the repository into uri, suite and components. - # Remove "deb " at the beginning of the repo. - repo="${repo#deb }" - - # Get the uri - local uri="$(echo "$repo" | awk '{ print $1 }')" - - # Get the suite - local suite="$(echo "$repo" | awk '{ print $2 }')" - - # Get the components - local component="${repo##$uri $suite }" - - # Add the repository into sources.list.d - ynh_add_repo --uri="$uri" --suite="$suite" --component="$component" --name="$name" $append - - # Pin the new repo with the default priority, so it won't be used for upgrades. - # Build $pin from the uri without http and any sub path - local pin="${uri#*://}" - pin="${pin%%/*}" - # Set a priority only if asked - if [ -n "$priority" ] - then - priority="--priority=$priority" - fi - ynh_pin_repo --package="*" --pin="origin \"$pin\"" $priority --name="$name" $append - - # Get the public key for the repo - if [ -n "$key" ] - then - mkdir -p "/etc/apt/trusted.gpg.d" - wget -q "$key" -O - | gpg --dearmor | $wget_append /etc/apt/trusted.gpg.d/$name.gpg > /dev/null - fi - - # Update the list of package with the new repo - ynh_package_update -} - -# Remove an extra repository and the assiociated configuration. -# -# usage: ynh_remove_extra_repo [--name=name] -# | arg: -n, --name - Name for the files for this repo, $app as default value. -ynh_remove_extra_repo () { - # Declare an array to define the options of this helper. - local legacy_args=n - declare -Ar args_array=( [n]=name= ) - local name - # Manage arguments with getopts - ynh_handle_getopts_args "$@" - name="${name:-$app}" - - ynh_secure_remove "/etc/apt/sources.list.d/$name.list" - ynh_secure_remove "/etc/apt/preferences.d/$name" - ynh_secure_remove "/etc/apt/trusted.gpg.d/$name.gpg" - ynh_secure_remove "/etc/apt/trusted.gpg.d/$name.asc" - - # Update the list of package to exclude the old repo - ynh_package_update -} - -# Install packages from an extra repository properly. -# -# usage: ynh_install_extra_app_dependencies --repo="repo" --package="dep1 dep2" [--key=key_url] [--name=name] -# | arg: -r, --repo - Complete url of the extra repository. -# | arg: -p, --package - The packages to install from this extra repository -# | arg: -k, --key - url to get the public key. -# | arg: -n, --name - Name for the files for this repo, $app as default value. -ynh_install_extra_app_dependencies () { - # Declare an array to define the options of this helper. - local legacy_args=rpkn - declare -Ar args_array=( [r]=repo= [p]=package= [k]=key= [n]=name= ) - local repo - local package - local key - local name - # Manage arguments with getopts - ynh_handle_getopts_args "$@" - name="${name:-$app}" - key=${key:-0} - - # Set a key only if asked - if [ -n "$key" ] - then - key="--key=$key" - fi - # Add an extra repository for those packages - ynh_install_extra_repo --repo="$repo" $key --priority=995 --name=$name - - # Install requested dependencies from this extra repository. - ynh_add_app_dependencies --package="$package" - - # Remove this extra repository after packages are installed - ynh_remove_extra_repo --name=$app -} - -#================================================= - -# patched version of ynh_install_app_dependencies to be used with ynh_add_app_dependencies - -# Define and install dependencies with a equivs control file -# This helper can/should only be called once per app -# -# usage: ynh_install_app_dependencies dep [dep [...]] -# | arg: dep - the package name to install in dependence -# You can give a choice between some package with this syntax : "dep1|dep2" -# Example : ynh_install_app_dependencies dep1 dep2 "dep3|dep4|dep5" -# This mean in the dependence tree : dep1 & dep2 & (dep3 | dep4 | dep5) -# -# Requires YunoHost version 2.6.4 or higher. -ynh_install_app_dependencies () { - local dependencies=$@ - dependencies="$(echo "$dependencies" | sed 's/\([^\<=\>]\)\ \([^(]\)/\1, \2/g')" - dependencies=${dependencies//|/ | } - local manifest_path="../manifest.json" - if [ ! -e "$manifest_path" ]; then - manifest_path="../settings/manifest.json" # Into the restore script, the manifest is not at the same place - fi - - local version=$(grep '\"version\": ' "$manifest_path" | cut -d '"' -f 4) # Retrieve the version number in the manifest file. - if [ ${#version} -eq 0 ]; then - version="1.0" - fi - local dep_app=${app//_/-} # Replace all '_' by '-' - - # Handle specific versions - if [[ "$dependencies" =~ [\<=\>] ]] - then - # Replace version specifications by relationships syntax - # https://www.debian.org/doc/debian-policy/ch-relationships.html - # Sed clarification - # [^(\<=\>] ignore if it begins by ( or < = >. To not apply twice. - # [\<=\>] matches < = or > - # \+ matches one or more occurence of the previous characters, for >= or >>. - # [^,]\+ matches all characters except ',' - # Ex: package>=1.0 will be replaced by package (>= 1.0) - dependencies="$(echo "$dependencies" | sed 's/\([^(\<=\>]\)\([\<=\>]\+\)\([^,]\+\)/\1 (\2 \3)/g')" - fi - - cat > /tmp/${dep_app}-ynh-deps.control << EOF # Make a control file for equivs-build -Section: misc -Priority: optional -Package: ${dep_app}-ynh-deps -Version: ${version} -Depends: ${dependencies} -Architecture: all -Description: Fake package for $app (YunoHost app) dependencies - This meta-package is only responsible of installing its dependencies. -EOF - ynh_package_install_from_equivs /tmp/${dep_app}-ynh-deps.control \ - || ynh_die --message="Unable to install dependencies" # Install the fake package and its dependencies - rm /tmp/${dep_app}-ynh-deps.control - ynh_app_setting_set --app=$app --key=apt_dependencies --value="$dependencies" -} - -ynh_add_app_dependencies () { - # Declare an array to define the options of this helper. - local legacy_args=pr - declare -Ar args_array=( [p]=package= [r]=replace) - local package - local replace - # Manage arguments with getopts - ynh_handle_getopts_args "$@" - replace=${replace:-0} - - local current_dependencies="" - if [ $replace -eq 0 ] - then - local dep_app=${app//_/-} # Replace all '_' by '-' - if ynh_package_is_installed --package="${dep_app}-ynh-deps" - then - current_dependencies="$(dpkg-query --show --showformat='${Depends}' ${dep_app}-ynh-deps) " - fi - - current_dependencies=${current_dependencies// | /|} - fi - - ynh_install_app_dependencies "${current_dependencies}${package}" -} diff --git a/scripts/ynh_install_php__3 b/scripts/ynh_install_php__3 deleted file mode 100644 index 8d8323a..0000000 --- a/scripts/ynh_install_php__3 +++ /dev/null @@ -1,78 +0,0 @@ -#!/bin/bash - -# Install another version of php. -# -# usage: ynh_install_php --phpversion=phpversion [--package=packages] -# | arg: -v, --phpversion - Version of php to install. Can be one of 7.1, 7.2 or 7.3 -# | arg: -p, --package - Additionnal php packages to install -ynh_install_php () { - # Declare an array to define the options of this helper. - local legacy_args=vp - declare -Ar args_array=( [v]=phpversion= [p]=package= ) - local phpversion - local package - # Manage arguments with getopts - ynh_handle_getopts_args "$@" - package=${package:-} - - # Store php_version into the config of this app - ynh_app_setting_set $app php_version $phpversion - - if [ "$phpversion" == "7.0" ] - then - ynh_die "Do not use ynh_install_php to install php7.0" - fi - - # Store the ID of this app and the version of php requested for it - echo "$YNH_APP_INSTANCE_NAME:$phpversion" | tee --append "/etc/php/ynh_app_version" - - # Add an extra repository for those packages - ynh_install_extra_repo --repo="https://packages.sury.org/php/ $(lsb_release -sc) main" --key="https://packages.sury.org/php/apt.gpg" --priority=995 --name=extra_php_version - - # Install requested dependencies from this extra repository. - # Install php-fpm first, otherwise php will install apache as a dependency. - ynh_add_app_dependencies --package="php${phpversion}-fpm" - ynh_add_app_dependencies --package="php$phpversion php${phpversion}-common $package" - - # Set php7.0 back as the default version for php-cli. - update-alternatives --set php /usr/bin/php7.0 - - # Pin this extra repository after packages are installed to prevent sury of doing shit - ynh_pin_repo --package="*" --pin="origin \"packages.sury.org\"" 200 --name=extra_php_version - ynh_pin_repo --package="php7.0*" --pin="origin \"packages.sury.org\"" 600 --name=extra_php_version --append - - # INTEGRATE SERVICE IN YUNOHOST - yunohost service add php${phpversion}-fpm --log "/var/log/php${phpversion}-fpm.log" -} - -ynh_remove_php () { - # Get the version of php used by this app - local phpversion=$(ynh_app_setting_get $app php_version) - - if [ "$phpversion" == "7.0" ] || [ -z "$phpversion" ] - then - if [ "$phpversion" == "7.0" ] - then - ynh_print_err "Do not use ynh_remove_php to install php7.0" - fi - return 0 - fi - - # Remove the line for this app - sed --in-place "/$YNH_APP_INSTANCE_NAME:$phpversion/d" "/etc/php/ynh_app_version" - - # If no other app uses this version of php, remove it. - if ! grep --quiet "$phpversion" "/etc/php/ynh_app_version" - then - # Purge php dependences for this version. - ynh_package_autopurge "php$phpversion php${phpversion}-fpm php${phpversion}-common" - # Remove the service from the admin panel - yunohost service remove php${phpversion}-fpm - fi - - # If no other app uses alternate php versions, remove the extra repo for php - if [ ! -s "/etc/php/ynh_app_version" ] - then - ynh_secure_remove /etc/php/ynh_app_version - fi -}