First attempt for install script, not tested yet

conf/config.inc.php

@@ -0,0 +1,8 @@
+<?php
+define("TYPE_DB",   "mysql"          );
+define("HOST_DB",   "localhost"      );
+define("PORT_DB",   "3306"           );
+define("USER_DB",   "USER_DB_VALUE"  );
+define("PWD_DB",    "PWD_DB_VALUE"   );
+define("NAME_DB",   "NAME_DB_VALUE"  );
+define("PREFIX_DB", ""               );

conf/php-fpm.conf

@@ -1,251 +0,0 @@
-; Start a new pool named 'www'.
-; the variable $pool can we used in any directive and will be replaced by the
-; pool name ('www' here)
-[YNH_WWW_APP]
-
-; Per pool prefix
-; It only applies on the following directives:
-; - 'slowlog'
-; - 'listen' (unixsocket)
-; - 'chroot'
-; - 'chdir'
-; - 'php_values'
-; - 'php_admin_values'
-; When not set, the global prefix (or /usr) applies instead.
-; Note: This directive can also be relative to the global prefix.
-; Default Value: none
-;prefix = /path/to/pools/$pool
-
-; The address on which to accept FastCGI requests.
-; Valid syntaxes are:
-;   'ip.add.re.ss:port'    - to listen on a TCP socket to a specific address on
-;                            a specific port;
-;   'port'                 - to listen on a TCP socket to all addresses on a
-;                            specific port;
-;   '/path/to/unix/socket' - to listen on a unix socket.
-; Note: This value is mandatory.
-listen = /var/run/php5-fpm-YNH_WWW_APP.sock
-
-; Set listen(2) backlog. A value of '-1' means unlimited.
-; Default Value: 128 (-1 on FreeBSD and OpenBSD)
-;listen.backlog = -1
-
-; List of ipv4 addresses of FastCGI clients which are allowed to connect.
-; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
-; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
-; must be separated by a comma. If this value is left blank, connections will be
-; accepted from any ip address.
-; Default Value: any
-;listen.allowed_clients = 127.0.0.1
-
-; Set permissions for unix socket, if one is used. In Linux, read/write
-; permissions must be set in order to allow connections from a web server. Many
-; BSD-derived systems allow connections regardless of permissions.
-; Default Values: user and group are set as the running user
-;                 mode is set to 0666
-listen.owner = www-data
-listen.group = www-data
-listen.mode = 0600
-
-; Unix user/group of processes
-; Note: The user is mandatory. If the group is not set, the default user's group
-;       will be used.
-user = www-data
-group = www-data
-
-; Choose how the process manager will control the number of child processes.
-; Possible Values:
-;   static  - a fixed number (pm.max_children) of child processes;
-;   dynamic - the number of child processes are set dynamically based on the
-;             following directives:
-;             pm.max_children      - the maximum number of children that can
-;                                    be alive at the same time.
-;             pm.start_servers     - the number of children created on startup.
-;             pm.min_spare_servers - the minimum number of children in 'idle'
-;                                    state (waiting to process). If the number
-;                                    of 'idle' processes is less than this
-;                                    number then some children will be created.
-;             pm.max_spare_servers - the maximum number of children in 'idle'
-;                                    state (waiting to process). If the number
-;                                    of 'idle' processes is greater than this
-;                                    number then some children will be killed.
-; Note: This value is mandatory.
-pm = dynamic
-
-; The number of child processes to be created when pm is set to 'static' and the
-; maximum number of child processes to be created when pm is set to 'dynamic'.
-; This value sets the limit on the number of simultaneous requests that will be
-; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
-; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
-; CGI.
-; Note: Used when pm is set to either 'static' or 'dynamic'
-; Note: This value is mandatory.
-pm.max_children = 6
-
-; The number of child processes created on startup.
-; Note: Used only when pm is set to 'dynamic'
-; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
-pm.start_servers = 3
-
-; The desired minimum number of idle server processes.
-; Note: Used only when pm is set to 'dynamic'
-; Note: Mandatory when pm is set to 'dynamic'
-pm.min_spare_servers = 3
-
-; The desired maximum number of idle server processes.
-; Note: Used only when pm is set to 'dynamic'
-; Note: Mandatory when pm is set to 'dynamic'
-pm.max_spare_servers = 5
-
-; The number of requests each child process should execute before respawning.
-; This can be useful to work around memory leaks in 3rd party libraries. For
-; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
-; Default Value: 0
-pm.max_requests = 500
-
-; The URI to view the FPM status page. If this value is not set, no URI will be
-; recognized as a status page. By default, the status page shows the following
-; information:
-;   accepted conn        - the number of request accepted by the pool;
-;   pool                 - the name of the pool;
-;   process manager      - static or dynamic;
-;   idle processes       - the number of idle processes;
-;   active processes     - the number of active processes;
-;   total processes      - the number of idle + active processes.
-;   max children reached - number of times, the process limit has been reached,
-;                          when pm tries to start more children (works only for
-;                          pm 'dynamic')
-; The values of 'idle processes', 'active processes' and 'total processes' are
-; updated each second. The value of 'accepted conn' is updated in real time.
-; Example output:
-;   accepted conn:        12073
-;   pool:                 www
-;   process manager:      static
-;   idle processes:       35
-;   active processes:     65
-;   total processes:      100
-;   max children reached: 1
-; By default the status page output is formatted as text/plain. Passing either
-; 'html' or 'json' as a query string will return the corresponding output
-; syntax. Example:
-;   http://www.foo.bar/status
-;   http://www.foo.bar/status?json
-;   http://www.foo.bar/status?html
-; Note: The value must start with a leading slash (/). The value can be
-;       anything, but it may not be a good idea to use the .php extension or it
-;       may conflict with a real PHP file.
-; Default Value: not set
-pm.status_path = /fpm-status
-
-; The ping URI to call the monitoring page of FPM. If this value is not set, no
-; URI will be recognized as a ping page. This could be used to test from outside
-; that FPM is alive and responding, or to
-; - create a graph of FPM availability (rrd or such);
-; - remove a server from a group if it is not responding (load balancing);
-; - trigger alerts for the operating team (24/7).
-; Note: The value must start with a leading slash (/). The value can be
-;       anything, but it may not be a good idea to use the .php extension or it
-;       may conflict with a real PHP file.
-; Default Value: not set
-ping.path = /ping
-
-; This directive may be used to customize the response of a ping request. The
-; response is formatted as text/plain with a 200 response code.
-; Default Value: pong
-;ping.response = pong
-
-; The timeout for serving a single request after which the worker process will
-; be killed. This option should be used when the 'max_execution_time' ini option
-; does not stop script execution for some reason. A value of '0' means 'off'.
-; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
-; Default Value: 0
-request_terminate_timeout = 120s
-
-; The timeout for serving a single request after which a PHP backtrace will be
-; dumped to the 'slowlog' file. A value of '0s' means 'off'.
-; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
-; Default Value: 0
-request_slowlog_timeout = 5s
-
-; The log file for slow requests
-; Default Value: not set
-; Note: slowlog is mandatory if request_slowlog_timeout is set
-slowlog = /var/log/nginx/YNH_WWW_APP.slow.log
-
-; Set open file descriptor rlimit.
-; Default Value: system defined value
-rlimit_files = 4096
-
-; Set max core size rlimit.
-; Possible Values: 'unlimited' or an integer greater or equal to 0
-; Default Value: system defined value
-rlimit_core = 0
-
-; Chroot to this directory at the start. This value must be defined as an
-; absolute path. When this value is not set, chroot is not used.
-; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
-; of its subdirectories. If the pool prefix is not set, the global prefix
-; will be used instead.
-; Note: chrooting is a great security feature and should be used whenever
-;       possible. However, all PHP paths will be relative to the chroot
-;       (error_log, sessions.save_path, ...).
-; Default Value: not set
-;chroot =
-
-; Chdir to this directory at the start.
-; Note: relative path can be used.
-; Default Value: current directory or / when chroot
-chdir = /var/www/YNH_WWW_ALIAS
-
-; Redirect worker stdout and stderr into main error log. If not set, stdout and
-; stderr will be redirected to /dev/null according to FastCGI specs.
-; Note: on highloaded environement, this can cause some delay in the page
-; process time (several ms).
-; Default Value: no
-catch_workers_output = yes
-
-; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
-; the current environment.
-; Default Value: clean env
-;env[HOSTNAME] = $HOSTNAME
-;env[PATH] = /usr/local/bin:/usr/bin:/bin
-;env[TMP] = /tmp
-;env[TMPDIR] = /tmp
-;env[TEMP] = /tmp
-
-; Additional php.ini defines, specific to this pool of workers. These settings
-; overwrite the values previously defined in the php.ini. The directives are the
-; same as the PHP SAPI:
-;   php_value/php_flag             - you can set classic ini defines which can
-;                                    be overwritten from PHP call 'ini_set'.
-;   php_admin_value/php_admin_flag - these directives won't be overwritten by
-;                                     PHP call 'ini_set'
-; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
-
-; Defining 'extension' will load the corresponding shared extension from
-; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
-; overwrite previously defined php.ini values, but will append the new value
-; instead.
-
-; Note: path INI options can be relative and will be expanded with the prefix
-; (pool, global or /usr)
-
-; Default Value: nothing is defined by default except the values in php.ini and
-;                specified at startup with the -d argument
-;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com
-;php_flag[display_errors] = off
-;php_admin_value[error_log] = /var/log/fpm-php.www.log
-;php_admin_flag[log_errors] = on
-;php_admin_value[memory_limit] = 32M
-
-# Common values to change to increase file upload limit
-;php_value[upload_max_filesize] = 50M
-;php_value[post_max_size] = 50M
-;php_value[mail.add_x_header] = Off
-
-# Other common parameters
-;php_value[max_execution_time] = 600
-;php_value[max_input_time] = 300
-;php_value[memory_limit] = 256M
-;php_value[short_open_tag] = On
-

manifest.json

@@ -1,14 +1,15 @@
 {
-    "name": "YunoHost example app",
-    "id": "ynhexample",
+    "name": "Galette",
+    "id": "galette",
     "description": {
-        "en": "Example package for Yunohost applications."
+        "en": "Membership management web application for non profit organizations",
+        "fr": "Outil de gestion d'adhérents et de cotisation en ligne pour associations"
     },
     "licence": "free",
     "maintainer": {
-        "name": "John doe",
-        "email": "john.doe@example.com",
-        "url": "http://example.com"
+        "name": "Alex Aubin",
+        "email": "alex.aubin@mailoo.org",
+        "url": "https://github.com/alexAubin/"
     },
     "multi_instance": "false",
     "arguments": {
@@ -16,17 +17,17 @@
             {
                 "name": "domain",
                 "ask": {
-                    "en": "Choose a domain for ynhexample"
+                    "en": "Choose a domain for galette"
                 },
                 "example": "example.com"
             },
             {
                 "name": "path",
                 "ask": {
-                    "en": "Choose a path for ynhexample"
+                    "en": "Choose a path for galette"
                 },
-                "example": "/example",
-                "default": "/example"
+                "example": "/galette",
+                "default": "/galette"
             },
             {
                 "name": "admin",

scripts/install

@@ -1,61 +1,106 @@
 #!/bin/bash
-app=ynhexample
 
-# Retrieve arguments
+####################################################
+#   Retrieve arguments / set global variables      #
+####################################################
+
+app=galette
+version=0.8.2
+
 domain=$1
 path=$2
 admin=$3
 is_public=$4
 
-# Save app settings
-sudo yunohost app setting $app admin -v "$admin"
-sudo yunohost app setting $app is_public -v "$is_public"
+####################################################
+#   Check domain / path availability               #
+####################################################
 
-# Check domain/path availability
 sudo yunohost app checkurl $domain$path -a $app
+
 if [[ ! $? -eq 0 ]]; then
+    echo "Error : domain/path url isnt available"
     exit 1
 fi
 
-# Copy source files
-final_path=/var/www/$app
-sudo mkdir -p $final_path
-sudo cp -a ../sources/* $final_path
+####################################################
+#   Check that admin user is an existing account   #
+####################################################
+
+sudo yunohost user list --json | grep -q "\"username\": \"$admin\""
+if [[ ! $? -eq 0 ]]; then
+    echo "Error : the chosen admin user does not exist"
+    exit 1
+fi
+
+sudo yunohost app setting $app admin -v $admin
+
+sudo yunohost app setting $app is_public -v "$is_public"
+
+####################################################
+#   Copy / install source files                    #
+####################################################
+
+final_path=/var/www/$app
+
+# Get and move sources
+
+tar xjvf sources/galette-$version.tar.bz2
+mv galette-$version/galette $final_path
+rm -r galette-$version
+
+# Set permissions
+
+chown -R root:www-data $final_path
+chmod -R o-rwx $final_path
+for folder in cache config exports logs photos templates_c tempimages
+do
+    chmod u+rx g+rwx $final_path/data/$folder
+done
+
+####################################################
+#   Create a mysql database and configure galette  #
+####################################################
+
+# Generate random password
+
+db_user=galette
+db_pwd=$(dd if=/dev/urandom bs=1 count=200 2> /dev/null | tr -c -d '[A-Za-z0-9]' | sed -n 's/\(.\{24\}\).*/\1/p')
+
+# Initialize database and store mysql password for upgrade
+
+sudo yunohost app initdb $db_user -p $db_pwd
+sudo yunohost app setting $app mysqlpassword -v $db_pwd
+
+# Generate random password
+
+cp ../conf/config.inc.php $final_path/config/
+sudo sed -i "s/USER_DB_VALUE/$db_user/g" $final_path/config/config.inc.php
+sudo sed -i "s/PWD_DB_VALUE/$db_pwd/g"   $final_path/config/config.inc.php
+sudo sed -i "s/NAME_DB_VALUE/$db_user/g" $final_path/config/config.inc.php
+
+####################################################
+#   Nginx configuration                            #
+####################################################
 
-# Modify Nginx configuration file and copy it to Nginx conf directory
 sed -i "s@YNH_WWW_PATH@$path@g" ../conf/nginx.conf
 sed -i "s@YNH_WWW_ALIAS@$final_path/@g" ../conf/nginx.conf
-# If a dedicated php-fpm process is used :
-# Don't forget to modify ../conf/nginx.conf accordingly or your app will not work !
-#
-#sudo sed -i "s@YNH_WWW_APP@$app@g" ../conf/nginx.conf
 sudo cp ../conf/nginx.conf /etc/nginx/conf.d/$domain.d/$app.conf
 
-# If a dedicated php-fpm process is used :
-# Adjustment and copy dedicated php-fpm conf file
-# Don't forget to modify ../conf/php-fpm.conf accordingly or your app will not work !
-#
-#sed -i "s@YNH_WWW_APP@$app@g" ../conf/php-fpm.conf
-#sed -i "s@YNH_WWW_ALIAS@$final_path/@g" ../conf/php-fpm.conf
-#finalphpconf=/etc/php5/fpm/pool.d/$app.conf
-#sudo cp ../conf/php-fpm.conf $finalphpconf
-#sudo chown root: $finalphpconf
-#sudo chmod 644 $finalphpconf
+####################################################
+#   SSOWat configuration                           #
+####################################################
 
-# If app is public, add url to SSOWat conf as skipped_uris
 if [ "$is_public" = "Yes" ];
 then
   # unprotected_uris allows SSO credentials to be passed anyway.
   sudo yunohost app setting $app unprotected_uris -v "/"
 fi
 
+####################################################
+#   Restart services                               #
+####################################################
 
-# If dedicated php-fpm process :
-#
-#sudo service php5-fpm reload
-
-# Restart services
 sudo service nginx reload
 sudo yunohost app ssowatconf
 
-

scripts/remove

@@ -1,23 +1,16 @@
 #!/bin/bash
-app=ynhexample
 
-# Retrieve arguments
-domain=$(sudo yunohost app setting $app domain)
-path=$(sudo yunohost app setting $app path)
-admin=$(sudo yunohost app setting $app admin)
-is_public=$(sudo yunohost app setting $app is_public)
+app=galette
+db_user=galette
+db_name=galett
+e
+root_pwd=$(sudo cat /etc/yunohost/mysql)
+domain=$(sudo yunohost app setting galette domain)
 
-# Remove sources
+mysql -u root -p$root_pwd -e "DROP DATABASE $db_name ; DROP USER $db_user@localhost ;"
 sudo rm -rf /var/www/$app
-
-# Remove configuration files
 sudo rm -f /etc/nginx/conf.d/$domain.d/$app.conf
 
-# If a dedicated php-fpm process is used :
-#
-#sudo rm -f /etc/php5/fpm/pool.d/$app.conf
-#sudo service php5-fpm reload
-
 # Restart services
 sudo service nginx reload
 sudo yunohost app ssowatconf

sources/README.md

@@ -1,3 +0,0 @@
-Place the sources of the webapp in this folder.
-
-This file can be removed.