remove multissid

conf/hostapd.accesspoint.conf

@@ -1,7 +0,0 @@
-__BSS_COMMENT__bss=__WIFI_INTERFACE__
-ssid=__WIFI_SSID__
-__SEC_COMMENT__wpa=2
-__SEC_COMMENT__wpa_passphrase=__WIFI_PASSPHRASE__
-__SEC_COMMENT__wpa_key_mgmt=WPA-PSK
-__SEC_COMMENT__wpa_pairwise=TKIP
-__SEC_COMMENT__rsn_pairwise=CCMP

conf/hostapd.base.conf

@@ -1,8 +1,12 @@
 interface=__WIFI_DEVICE__
 hw_mode=g
-__N_COMMENT__ieee80211n=1
-__N_COMMENT__wmm_enabled=1
 macaddr_acl=0
 auth_algs=1
 ignore_broadcast_ssid=0
 channel=__WIFI_CHANNEL__
+ssid=__WIFI_SSID__
+__SEC_COMMENT__wpa=2
+__SEC_COMMENT__wpa_passphrase=__WIFI_PASSPHRASE__
+__SEC_COMMENT__wpa_key_mgmt=WPA-PSK
+__SEC_COMMENT__wpa_pairwise=TKIP
+__SEC_COMMENT__rsn_pairwise=CCMP

conf/ynh-hotspot

@@ -17,65 +17,49 @@
 # You should have received a copy of the GNU Affero General Public License
 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
+source /usr/share/yunohost/helpers
+
 # Functions
 ## State functions
 
 has_ip6delegatedprefix() {
-    local i=${1}
+    [[ -n "${ip6_net}" ]] && [[ "${ip6_net}" != "none" ]]
-
-    [[ -n "${ip6_net[${i}]}" ]] && [[ "${ip6_net[${i}]}" != "none" ]]
 }
 
 ip6addrfromdelegatedprefix() {
-    local i=${1}
+    echo "${ip6_net}1"
-
-    echo "${ip6_net[${i}]}${i}001"
 }
 
 is_nat_set() {
     local gateway_interface=${1}
-
     iptables -w -nvt nat -L POSTROUTING | grep MASQUERADE | grep -q "${gateway_interface}"
 }
 
 is_ip4nataddr_set() {
-    local i=${1}
+    ip address show dev "${wifi_device}" 2>/dev/null | grep -q "${ip4_nat_prefix}.1/24"
-    local dev=$(devfromid "${i}")
-
-    ip address show dev "${dev}" 2>/dev/null | grep -q "${ip4_nat_prefix[${i}]}.1/24"
 }
 
 is_ip6addr_set() {
-    local i=${1}
+    ip address show dev "${wifi_device}" 2>/dev/null | grep -q "$(ip6addrfromdelegatedprefix)/64"
-    local dev=$(devfromid "${i}")
-
-    ip address show dev "${dev}" 2>/dev/null | grep -q "$(ip6addrfromdelegatedprefix $i)/64"
 }
 
 is_ip6firewall_set() {
-    local i=${1}
+    ip6tables -w -nvL FORWARD | grep DROP | grep -q "${wifi_device}"
-    local dev=$(devfromid "${i}")
-
-    ip6tables -w -nvL FORWARD | grep DROP | grep -q "${dev}"
 }
 
 is_forwarding_set() {
     local ip6=$(sysctl net.ipv6.conf.all.forwarding | awk '{ print $NF; }')
     local ip4=$(sysctl net.ipv4.conf.all.forwarding | awk '{ print $NF; }')
 
-    [ "${ip6}" -eq 1 ] && [ "${ip4}" -eq 1 ]
+    [[ "${ip6}" -eq 1 ]] && [[ "${ip4}" -eq 1 ]]
 }
 
 is_dhcpd6_running() {
-    local i=${1}
+    [[ -e "/run/dnsmasq/dnsmasq-dhcpdv6-ssid-${wifi_device}.pid" ]] && ps -p $(cat "/run/dnsmasq/dnsmasq-dhcpdv6-ssid-${wifi_device}.pid") > /dev/null
-
-    [[ -e "/run/dnsmasq/dnsmasq-dhcpdv6-ssid${i}.pid" ]] && ps -p $(cat "/run/dnsmasq/dnsmasq-dhcpdv6-ssid${i}.pid") > /dev/null
 }
 
 is_dhcpd4_running() {
-    local i=${1}
+    [[ -e "/run/dnsmasq/dnsmasq-dhcpdv4-ssid-${wifi_device}.pid" ]] && ps -p $(cat "/run/dnsmasq/dnsmasq-dhcpdv4-ssid-${wifi_device}.pid") > /dev/null
-
-    [[ -e "/run/dnsmasq/dnsmasq-dhcpdv4-ssid${i}.pid" ]] && ps -p $(cat "/run/dnsmasq/dnsmasq-dhcpdv4-ssid${i}.pid") > /dev/null
 }
 
 is_hostapd_running() {
@@ -83,18 +67,39 @@ is_hostapd_running() {
 }
 
 is_running() {
-    for i in $(seq 0 $((${multissid} - 1))); do
+    if has_ip6delegatedprefix; then
-        (has_ip6delegatedprefix ${i} && is_ip6addr_set ${i} \
+        if ! is_ip6addr_set; then
-            && ([ "${ip6_firewall[${i}]}" -eq 1 ] && is_ip6firewall_set ${i} || [ "${ip6_firewall[${i}]}" -eq 0 ]) \
-            && is_dhcpd6_running ${i} || ! has_ip6delegatedprefix ${i}) \
-            && is_ip4nataddr_set ${i} && is_dhcpd4_running ${i}
-
-        if [ ! $? -eq 0 ]; then
             return 1
         fi
-    done
+        if [[ "${ip6_firewall}" -eq 1 ]] && ! is_ip6firewall_set; then
+            return 1
+        fi
+        if ! is_dhcpd6_running; then
+            return 1
+        fi
+    fi
 
-    is_hostapd_running && is_forwarding_set && ([ -z "${new_gateway_interface}" ] || is_nat_set "${new_gateway_interface}")
+    if ! is_ip4nataddr_set; then
+        return 1
+    fi
+
+    if ! is_dhcpd4_running; then
+        return 1
+    fi
+
+    if ! is_hostapd_running; then
+        return 1
+    fi
+
+    if ! is_forwarding_set; then
+        return 1
+    fi
+
+    if [[ -n ${new_gateway_interface} ]] && ! is_nat_set "${new_gateway_interface}"; then
+        return 1
+    fi
+
+    return 0
 }
 
 ## Setters
@@ -106,33 +111,26 @@ set_nat() {
 }
 
 set_ipaddr() {
-    local i=${1}
+    if ! is_ip4nataddr_set; then
-    local dev=$(devfromid "${i}")
+        echo "hotspot ${wifi_device}: Set IPv4 NAT address"
-
+        ip address add "${ip4_nat_prefix}.1/24" dev "${wifi_device}"
-    if ! is_ip4nataddr_set ${i}; then
-        echo "hotspot${i}: Set IPv4 NAT address"
-        ip address add "${ip4_nat_prefix[${i}]}.1/24" dev "${dev}"
     fi
 
-    if has_ip6delegatedprefix ${i} && ! is_ip6addr_set ${i}; then
+    if has_ip6delegatedprefix && ! is_ip6addr_set; then
-        echo "hotspot${i}: Set IPv6 address"
+        echo "hotspot ${wifi_device}: Set IPv6 address"
-        ip address delete "$(ip6addrfromdelegatedprefix $i)/64" dev tun0 &>/dev/null
+        ip address delete "$(ip6addrfromdelegatedprefix)/64" dev tun0 &>/dev/null
-        ip address add "$(ip6addrfromdelegatedprefix $i)/64" dev "${dev}"
+        ip address add "$(ip6addrfromdelegatedprefix)/64" dev "${wifi_device}"
     fi
 }
 
 set_ipfirewall() {
-    local i=${1}
-    local dev=$(devfromid "${i}")
-
     # Set ipv6 firewalling
-    if has_ip6delegatedprefix ${i} && [ "${ip6_firewall[${i}]}" -eq 1 ] && ! is_ip6firewall_set ${i}; then
+    if has_ip6delegatedprefix && [[ "${ip6_firewall}" -eq 1 ]] && ! is_ip6firewall_set; then
-        echo "hotspot${i}: Set IPv6 firewalling"
+        echo "hotspot ${wifi_device}: Set IPv6 firewalling"
-        ip6tables -w -A FORWARD -i "${dev}" -j ACCEPT
+        ip6tables -w -A FORWARD -i "${wifi_device}" -j ACCEPT
-        ip6tables -w -A FORWARD -o "${dev}" -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT
+        ip6tables -w -A FORWARD -o "${wifi_device}" -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT
-        ip6tables -w -A FORWARD -o "${dev}" -j DROP
+        ip6tables -w -A FORWARD -o "${wifi_device}" -j DROP
     fi
-
 }
 
 set_forwarding() {
@@ -141,62 +139,22 @@ set_forwarding() {
 }
 
 start_dhcpd() {
-    local i=${1}
-    local dev=$(devfromid "${i}")
-
     # Run DHCPv4 server
-    if ! is_dhcpd4_running ${i}; then
+    if ! is_dhcpd4_running; then
-        echo "hotspot${i}: Start the DHCPv4 server (dnsmasq)"
+        echo "hotspot ${wifi_device}: Start the DHCPv4 server (dnsmasq)"
-
+        dnsmasq -C /etc/dnsmasq.dhcpd/dhcpdv4-ssid-${wifi_device}.conf -p0 -x /run/dnsmasq/dnsmasq-dhcpv4-ssid-${wifi_device}.pid
-        cp /etc/dnsmasq.dhcpd/dhcpdv4{.conf.tpl,-ssid${i}.conf}
-
-        sed "s|__WIFI_DEVICE__|${dev}|g" -i /etc/dnsmasq.dhcpd/dhcpdv4-ssid${i}.conf
-        sed "s|__IP4_DNS__|${ip4_dns[${i}]}|g" -i /etc/dnsmasq.dhcpd/dhcpdv4-ssid${i}.conf
-        sed "s|__IP4_NAT_PREFIX__|${ip4_nat_prefix[${i}]}|g" -i /etc/dnsmasq.dhcpd/dhcpdv4-ssid${i}.conf
-
-        dnsmasq -C /etc/dnsmasq.dhcpd/dhcpdv4-ssid${i}.conf -p0 -x /run/dnsmasq/dnsmasq-dhcpv4-ssid${i}.pid
     fi
 
     # Run DHCPv6 server
-    if has_ip6delegatedprefix ${i} && ! is_dhcpd6_running ${i}; then
+    if has_ip6delegatedprefix && ! is_dhcpd6_running; then
-        echo "hotspot${i}: Start the NDP and DHCPv6 server (dnsmasq)"
+        echo "hotspot ${wifi_device}: Start the NDP and DHCPv6 server (dnsmasq)"
-
+        dnsmasq -C /etc/dnsmasq.dhcpd/dhcpdv6-ssid-${wifi_device}.conf -p0 -x /run/dnsmasq/dnsmasq-dhcpv6-ssid-${wifi_device}.pid
-        cp /etc/dnsmasq.dhcpd/dhcpdv6{.conf.tpl,-ssid${i}.conf}
-
-        sed "s|__WIFI_DEVICE__|${dev}|g" -i /etc/dnsmasq.dhcpd/dhcpdv6-ssid${i}.conf
-        sed "s|__IP6_DNS__|${ip6_dns[${i}]}|g" -i /etc/dnsmasq.dhcpd/dhcpdv6-ssid${i}.conf
-        sed "s|__IP6_NET__|${ip6_net[${i}]}|g" -i /etc/dnsmasq.dhcpd/dhcpdv6-ssid${i}.conf
-
-        dnsmasq -C /etc/dnsmasq.dhcpd/dhcpdv6-ssid${i}.conf -p0 -x /run/dnsmasq/dnsmasq-dhcpv6-ssid${i}.pid
     fi
 }
 
 configure_hostapd() {
-
     local ethaddr=$(ip link show dev "${wifi_device}" | grep link/ether | awk -F: '{ printf "02:%s:%s:%s:%s:00", $2, $3, $4, $5 }')
     ip link set addr "${ethaddr}" dev "${wifi_device}"
-
-    cp /etc/hostapd/hostapd.base.conf /etc/hostapd/hostapd.conf
-    sed "s|__WIFI_DEVICE__|${wifi_device}|g" -i /etc/hostapd/hostapd.conf
-    sed "s|__WIFI_CHANNEL__|${wifi_channel}|g" -i /etc/hostapd/hostapd.conf
-    sed "s|__N_COMMENT__||g" -i /etc/hostapd/hostapd.conf
-
-    for i in $(seq 0 $((${multissid} - 1))); do
-
-        [ "${wifi_secure[${i}]}" -eq 1 ] && local sec_comment="" || local sec_comment="#"
-        [ "${i}" -eq 0 ] && local bss_comment="#" || local bss_comment=""
-
-        cp /etc/hostapd/hostapd.accesspoint.conf /etc/hostapd/hostapd.conf.tmp
-
-        sed "s|__WIFI_INTERFACE__|hotspot${i}|g" -i /etc/hostapd/hostapd.conf.tmp
-        sed "s|__WIFI_SSID__|${wifi_ssid[${i}]}|g" -i /etc/hostapd/hostapd.conf.tmp
-        sed "s|__WIFI_PASSPHRASE__|${wifi_passphrase[${i}]}|g" -i /etc/hostapd/hostapd.conf.tmp
-        sed "s|__SEC_COMMENT__|${sec_comment}|g" -i /etc/hostapd/hostapd.conf.tmp
-        sed "s|__BSS_COMMENT__|${bss_comment}|g" -i /etc/hostapd/hostapd.conf.tmp
-
-        cat /etc/hostapd/hostapd.conf.tmp >>/etc/hostapd/hostapd.conf
-        rm /etc/hostapd/hostapd.conf.tmp
-    done
 }
 
 ## Unsetters
@@ -208,29 +166,23 @@ unset_nat() {
 }
 
 unset_ipaddr() {
-    local i=${1}
+    if is_ip4nataddr_set; then
-    local dev=$(devfromid "${i}")
+        echo "hotspot ${wifi_device}: Unset IPv4 NAT address"
-
+        ip address delete "${ip4_nat_prefix}.1/24" dev "${wifi_device}"
-    if is_ip4nataddr_set ${i}; then
-        echo "hotspot${i}: Unset IPv4 NAT address"
-        ip address delete "${ip4_nat_prefix[${i}]}.1/24" dev "${dev}"
     fi
 
-    if has_ip6delegatedprefix ${i} && is_ip6addr_set ${i}; then
+    if has_ip6delegatedprefix && is_ip6addr_set; then
-        echo "hotspot${i}: Unset IPv6 address"
+        echo "hotspot ${wifi_device}: Unset IPv6 address"
-        ip address delete "$(ip6addrfromdelegatedprefix $i)/64" dev "${dev}"
+        ip address delete "$(ip6addrfromdelegatedprefix)/64" dev "${wifi_device}"
     fi
 }
 
 unset_ipfirewall() {
-    local i=${1}
+    if has_ip6delegatedprefix && [[ "${ip6_firewall}" -eq 1 ]] && is_ip6firewall_set; then
-    local dev=$(devfromid "${i}")
+        echo "hotspot ${wifi_device}: Unset IPv6 firewalling"
-
+        ip6tables -w -D FORWARD -i "${wifi_device}" -j ACCEPT
-    if has_ip6delegatedprefix ${i} && [ "${ip6_firewall[${i}]}" -eq 1 ] && is_ip6firewall_set ${i}; then
+        ip6tables -w -D FORWARD -o "${wifi_device}" -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT
-        echo "hotspot${i}: Unset IPv6 firewalling"
+        ip6tables -w -D FORWARD -o "${wifi_device}" -j DROP
-        ip6tables -w -D FORWARD -i "${dev}" -j ACCEPT
-        ip6tables -w -D FORWARD -o "${dev}" -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT
-        ip6tables -w -D FORWARD -o "${dev}" -j DROP
     fi
 }
 
@@ -240,81 +192,23 @@ unset_forwarding() {
 }
 
 stop_dhcpd() {
-    local i=${1}
+    if is_dhcpd6_running; then
-
+        echo "hotspot ${wifi_device}: Stop the NDP and DHCPv6 server (dnsmasq)"
-    if is_dhcpd6_running ${i}; then
+        kill $(cat /run/dnsmasq/dnsmasq-dhcpdv6-ssid-${wifi_device}.pid)
-        echo "hotspot${i}: Stop the NDP and DHCPv6 server (dnsmasq)"
+        rm -f /run/dnsmasq/dnsmasq-dhcpdv6-ssid-${wifi_device}.pid
-        kill $(cat /run/dnsmasq/dnsmasq-dhcpdv6-ssid${i}.pid)
-        rm -f /run/dnsmasq/dnsmasq-dhcpdv6-ssid${1}.pid
-        rm -f /etc/dnsmasq.dhcpd/dhcpdv6-ssid${i}.conf
     fi
 
-    if is_dhcpd4_running ${i}; then
+    if is_dhcpd4_running; then
-        echo "hotspot${i}: Stop the DHCPv4 server (dnsmasq)"
+        echo "hotspot ${wifi_device}: Stop the DHCPv4 server (dnsmasq)"
-        kill $(cat /run/dnsmasq/dnsmasq-dhcpdv4-ssid${i}.pid)
+        kill $(cat /run/dnsmasq/dnsmasq-dhcpdv4-ssid-${wifi_device}.pid)
-        rm -f /run/dnsmasq/dnsmasq-dhcpdv4-ssid${1}.pid
+        rm -f /run/dnsmasq/dnsmasq-dhcpdv4-ssid-${wifi_device}.pid
-        rm -f /etc/dnsmasq.dhcpd/dhcpdv4-ssid${i}.conf
     fi
 }
 
-stop_dhcpd4() {
-    :
-}
-
 stop_hostapd() {
     systemctl stop hostapd
 }
 
-## Tools
-
-ynh_setting_get() {
-
-    APP="$1" KEY="$2" python3 - <<EOF
-import os, yaml, sys
-app = os.environ['APP']
-key = os.environ['KEY']
-setting_file = "/etc/yunohost/apps/%s/settings.yml" % app
-assert os.path.exists(setting_file), "Setting file %s does not exists ?" % setting_file
-with open(setting_file) as f:
-    settings = yaml.safe_load(f)
-    if key in settings:
-        print(settings[key])
-EOF
-
-}
-
-ynh_setting_set() {
-
-    # This is a partial copypasta of the official ynh_app_setting internal helper
-    # In particular, we do this instead of relying on 'yunohost app setting' for
-    # performance reasons (it takes a few second to run every yunohost commands)
-    # and to remove the need for the infamous '--need-lock' option/issue.
-
-    APP="$1" KEY="$2" VALUE="${3:-}" python3 - <<EOF
-import os, yaml, sys
-app = os.environ['APP']
-key, value = os.environ['KEY'], os.environ.get('VALUE', None)
-setting_file = "/etc/yunohost/apps/%s/settings.yml" % app
-assert os.path.exists(setting_file), "Setting file %s does not exists ?" % setting_file
-with open(setting_file) as f:
-    settings = yaml.load(f)
-settings[key] = value
-with open(setting_file, "w") as f:
-    yaml.safe_dump(settings, f, default_flow_style=False)
-EOF
-
-}
-
-devfromid() {
-    local i=${1}
-
-    if [ "${i}" -eq 0 ]; then
-        echo "${wifi_device}"
-    else
-        echo "hotspot${i}"
-    fi
-}
-
 if [ "$1" != restart ]; then
 
     # Variables
@@ -322,33 +216,30 @@ if [ "$1" != restart ]; then
     echo -n "Retrieving Yunohost settings... "
 
     service_enabled=$(systemctl is-enabled ynh-hotspot)
-    wifi_device=$(ynh_setting_get hotspot wifi_device)
+    wifi_device=$(ynh_app_setting_get hotspot wifi_device)
-    wifi_channel=$(ynh_setting_get hotspot wifi_channel)
+    wifi_channel=$(ynh_app_setting_get hotspot wifi_channel)
-    multissid=$(ynh_setting_get hotspot multissid)
 
-    IFS='|' read -a wifi_ssid <<<"$(ynh_setting_get hotspot wifi_ssid)"
+    wifi_ssid=$(ynh_app_setting_get hotspot wifi_ssid)
-    IFS='|' read -a wifi_secure <<<"$(ynh_setting_get hotspot wifi_secure)"
+    wifi_secure=$(ynh_app_setting_get hotspot wifi_secure)
-    IFS='|' read -a wifi_passphrase <<<"$(ynh_setting_get hotspot wifi_passphrase)"
+    wifi_passphrase=$(ynh_app_setting_get hotspot wifi_passphrase)
-    IFS='|' read -a ip6_firewall <<<"$(ynh_setting_get hotspot ip6_firewall)"
+    ip6_firewall=$(ynh_app_setting_get hotspot ip6_firewall)
-    IFS='|' read -a ip6_net <<<"$(ynh_setting_get hotspot ip6_net)"
+    ip6_net=$(ynh_app_setting_get hotspot ip6_net)
-    IFS='|' read -a dns <<<"$(ynh_setting_get hotspot dns)"
+    dns=$(ynh_app_setting_get hotspot dns)
-    IFS='|' read -a ip4_nat_prefix <<<"$(ynh_setting_get hotspot ip4_nat_prefix)"
+    ip4_nat_prefix=$(ynh_app_setting_get hotspot ip4_nat_prefix)
-    for i in $(seq 0 $((${multissid} - 1))); do
+    ip6_dns=""
-        ip6_dns[${i}]=""
+    ip4_dns=""
-        ip4_dns[${i}]=""
+    for ip in $(echo "${dns}" | tr ',' ' '); do
-        for ip in $(echo "${dns[${i}]}" | tr ',' ' '); do
         if [[ "$ip" == *":"* ]]; then
-                ip6_dns[${i}]+="[$ip],"
+            ip6_dns+="[$ip],"
         else
-                ip4_dns[${i}]+="$ip,"
+            ip4_dns+="$ip,"
         fi
     done
     # Remove trailing ,
-        ip6_dns[${i}]="${ip6_dns[${i}]%%,}"
+    ip6_dns="${ip6_dns%%,}"
-        ip4_dns[${i}]="${ip4_dns[${i}]%%,}"
+    ip4_dns="${ip4_dns%%,}"
-    done
 
-    old_gateway_interface=$(ynh_setting_get hotspot gateway_interface)
+    old_gateway_interface=$(ynh_app_setting_get hotspot gateway_interface)
     new_gateway_interface=$(ip route get 1.2.3.4 | awk '{ print $5; }')
 
     echo "OK"
@@ -361,12 +252,12 @@ start)
     if is_running; then
         echo "Already started"
         exit 0
-    elif [ "${service_enabled}" != "enabled" ]; then
+    elif [[ "${service_enabled}" != "enabled" ]]; then
         echo "Not starting because hotspod service is disabled"
         exit 1
     fi
 
-    if [ -z "${wifi_device}" ]; then
+    if [[ -z "${wifi_device}" ]]; then
         echo "[FAIL] No wifi device selected. Make sure your wifi antenna is plugged-in / available and select it in the Hotspot admin"
         exit 1
     fi
@@ -375,13 +266,12 @@ start)
     touch /tmp/.ynh-hotspot-started
 
     # Check old state of the ipv4 NAT settings
-    if [ -n "${old_gateway_interface}" ] && [ "${new_gateway_interface}" != "${old_gateway_interface}" ] && is_nat_set "${old_gateway_interface}"; then
+    if [[ -n "${old_gateway_interface}" ]] && [[ "${new_gateway_interface}" != "${old_gateway_interface}" ]] && is_nat_set "${old_gateway_interface}"; then
-
         unset_nat "${old_gateway_interface}"
     fi
 
     # Set ipv4 NAT
-    if [ -n "${new_gateway_interface}" ] && ! is_nat_set "${new_gateway_interface}"; then
+    if [[ -n "${new_gateway_interface}" ]] && ! is_nat_set "${new_gateway_interface}"; then
         echo "Set NAT"
         set_nat "${new_gateway_interface}"
     fi
@@ -402,38 +292,20 @@ start)
         fi
 
         sleep 1
-
-        # On single SSID, the hotspot interface will be wlan0 (or similar)
-        # in multissid, we additionally want to make sure that at least hotspot1 started
-        if [ "${multissid}" -gt 1 ]; then
-            i=0
-            while ! ip link show dev "hotspot1" &>/dev/null; do
-                sleep 1
-                if [ ${i} -gt 20 ]; then
-                    echo "Failed to see hotspot interface showing up in 'ip a'"
-                    stop_hostapd
-                    exit 1
-                fi
-                i=$(($i + 1))
-            done
-        fi
     fi
 
-    # For each registred ssid
+    set_ipaddr
-    for i in $(seq 0 $((${multissid} - 1))); do
+    set_ipfirewall
-        set_ipaddr ${i}
+    start_dhcpd
-        set_ipfirewall ${i}
-        start_dhcpd ${i}
-    done
 
     # Update dynamic settings
-    ynh_setting_set hotspot gateway_interface "${new_gateway_interface}"
+    ynh_app_setting_set hotspot gateway_interface "${new_gateway_interface}"
     ;;
 stop)
     echo "[hotspot] Stopping..."
     rm -f /tmp/.ynh-hotspot-started
 
-    if [ -n "${old_gateway_interface}" ] && is_nat_set "${old_gateway_interface}"; then
+    if [[ -n "${old_gateway_interface}" ]] && is_nat_set "${old_gateway_interface}"; then
         echo "Unset NAT"
         unset_nat "${old_gateway_interface}"
     fi
@@ -441,11 +313,9 @@ stop)
     echo "Unset forwarding"
     unset_forwarding
 
-    for i in $(seq 0 $((${multissid} - 1))); do
+    unset_ipaddr
-        unset_ipaddr ${i}
+    unset_ipfirewall
-        unset_ipfirewall ${i}
+    stop_dhcpd
-        stop_dhcpd ${i}
-    done
 
     if is_hostapd_running; then
         echo "Stop hostapd"
@@ -459,12 +329,12 @@ restart)
 status)
     exitcode=0
 
-    if [ "${service_enabled}" != "enabled" ]; then
+    if [[ "${service_enabled}" != "enabled" ]]; then
         echo "[FAIL] Hotspot Service disabled"
         exit 1
     fi
 
-    if [ -z "${wifi_device}" ]; then
+    if [[ -z "${wifi_device}" ]]; then
         echo "[FAIL] No wifi device selected. Make sure your wifi antenna is plugged-in / available and select it in the Hotspot admin"
         exit 1
     fi
@@ -474,7 +344,7 @@ status)
     if is_nat_set "${new_gateway_interface}"; then
         echo "[ OK ] IPv4 NAT set"
     else
-        if [ -z "${new_gateway_interface}" ]; then
+        if [[ -z "${new_gateway_interface}" ]]; then
             echo "[INFO] No IPv4 NAT set (no internet interface)"
         else
             echo "[FAIL] No IPv4 NAT set"
@@ -496,53 +366,51 @@ status)
         exitcode=1
     fi
 
-    for i in $(seq 0 $((${multissid} - 1))); do
+    if has_ip6delegatedprefix; then
-        if has_ip6delegatedprefix ${i}; then
+        echo "[INFO] hotspot ${wifi_device}: IPv6 delegated prefix found"
-            echo "[INFO] hotspot${i}: IPv6 delegated prefix found"
+        echo "[INFO] hotspot ${wifi_device}: IPv6 address computed from the delegated prefix: $(ip6addrfromdelegatedprefix)"
-            echo "[INFO] hotspot${i}: IPv6 address computed from the delegated prefix: $(ip6addrfromdelegatedprefix $i)"
 
-            if is_ip6addr_set ${i}; then
+        if is_ip6addr_set; then
-                echo "[ OK ] hotspot${i}: IPv6 address set"
+            echo "[ OK ] hotspot ${wifi_device}: IPv6 address set"
         else
-                echo "[FAIL] hotspot${i}: No IPv6 address set"
+            echo "[FAIL] hotspot ${wifi_device}: No IPv6 address set"
             exitcode=1
         fi
 
-            if is_ip6firewall_set ${i}; then
+        if is_ip6firewall_set; then
-                echo "[ OK ] hotspot${i}: IPv6 firewalling set"
+            echo "[ OK ] hotspot ${wifi_device}: IPv6 firewalling set"
         else
-                if [ "${ip6_firewall[${i}]}" -eq 1 ]; then
+            if [[ "${ip6_firewall}" -eq 1 ]]; then
-                    echo "[FAIL] hotspot${i}: No IPv6 firewalling set"
+                echo "[FAIL] hotspot ${wifi_device}: No IPv6 firewalling set"
             else
-                    echo "[INFO] hotspot${i}: No IPv6 firewalling set"
+                echo "[INFO] hotspot ${wifi_device}: No IPv6 firewalling set"
             fi
             exitcode=1
         fi
 
-            if is_dhcpd6_running ${i}; then
+        if is_dhcpd6_running; then
-                echo "[ OK ] hotspot${i}: NDP and DHCPv6 server (dnsmasq) are running"
+            echo "[ OK ] hotspot ${wifi_device}: NDP and DHCPv6 server (dnsmasq) are running"
         else
-                echo "[FAIL] hotspot${i}: NDP and DHCPv6 server (dnsmasq) are not running"
+            echo "[FAIL] hotspot ${wifi_device}: NDP and DHCPv6 server (dnsmasq) are not running"
             exitcode=1
         fi
     else
-            echo "[INFO] hotspot${i}: No IPv6 delegated prefix found"
+        echo "[INFO] hotspot ${wifi_device}: No IPv6 delegated prefix found"
     fi
 
-        if is_dhcpd4_running ${i}; then
+    if is_dhcpd4_running; then
-            echo "[ OK ] hotspot${i}: DHCPv4 server (dnsmasq) is running"
+        echo "[ OK ] hotspot ${wifi_device}: DHCPv4 server (dnsmasq) is running"
     else
-            echo "[FAIL] hotspot${i}: DHCPv4 (dnsmasq) is not running"
+        echo "[FAIL] hotspot ${zifi_device}: DHCPv4 (dnsmasq) is not running"
         exitcode=1
     fi
 
-        if is_ip4nataddr_set ${i}; then
+    if is_ip4nataddr_set; then
-            echo "[ OK ]  hotspot${i}: IPv4 NAT address set"
+        echo "[ OK ]  hotspot ${wifi_device}: IPv4 NAT address set"
     else
-            echo "[FAIL] hotspot${i}: No IPv4 NAT address set"
+        echo "[FAIL] hotspot ${wifi_device}: No IPv4 NAT address set"
         exitcode=1
     fi
-    done
 
     exit ${exitcode}
     ;;

config_panel.toml

@@ -19,7 +19,7 @@ name = "Configuration"
         visible = "no_antenna"
 
         [main.service.status]
-        ask = "The status of your VPN is unknown."
+        ask = "The status of your Hotspot is unknown."
         type = "alert"
         style = "info"
         visible = "! no_antenna"
@@ -52,194 +52,58 @@ name = "Configuration"
         visible = "! no_antenna"
         help = "Changing the channel may help with signal strength depending on neighbour WiFis"
 
-        [main.service.multissid]
+    [main.hotspot]
-        ask = "Number of hotspots to broadcast"
+    name = "Hotspot"
-        type = "select"
-        choices.1 = "1"
-        choices.2 = "2"
-        choices.3 = "3"
-        visible = "! no_antenna"
-
-    [main.hotspot1]
-    name = "Hotspot 1"
     optional = false
     visible = "! no_antenna"
 
-        [main.hotspot1.wifi_ssid__1]
+        [main.hotspot.wifi_ssid]
         ask = "Name (SSID)"
         type = "string"
-        bind = "array_settings()"
         pattern.regexp = '^[\w \-]{1,32}$'
         pattern.error = "SSID in this app are limited to letter, number space, dash and underscores."
 
-        [main.hotspot1.wifi_secure__1]
+        [main.hotspot.wifi_secure]
         ask = "Secure"
         type = "boolean"
-        bind = "array_settings()"
 
-        [main.hotspot1.wifi_passphrase__1]
+        [main.hotspot.wifi_passphrase]
         ask = "Password (WPA2)"
         type = "string"
-        bind = "array_settings()"
         redact = true
         optional = true
-        visible = "wifi_secure__1"
+        visible = "wifi_secure"
         pattern.regexp = '^[a-zA-Z0-9]{8,63}$'
         pattern.error = "Only printable alphanumeric characters are permitted in your password. Maximal size 63 chars"
 
-        [main.hotspot1.advanced__1]
+        [main.hotspot.advanced]
         ask = "Advanced settings"
         type = "boolean"
-        bind = "array_settings()"
 
-        [main.hotspot1.ip4_nat_prefix__1]
+        [main.hotspot.ip4_nat_prefix]
         ask = "IPv4 NAT prefix (/24)"
         type = "string"
-        bind = "array_settings()"
+        visible = "advanced"
-        visible = "advanced__1"
         pattern.regexp = '^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$'
         pattern.error = "Please provide a private /24 range in the format xxx.xxx.xxx"
 
-        [main.hotspot1.ip6_net__1]
+        [main.hotspot.ip6_net]
         ask = "IPv6 delegated prefix"
         type = "string"
-        bind = "array_settings()"
         optional = true
-        visible = "advanced__1"
+        visible = "advanced"
         pattern.regexp = '^[0-9a-fA-F:]+$'
         pattern.error = "Please provide a valid IPv6 Prefix"
 
-        [main.hotspot1.ip6_firewall__1]
+        [main.hotspot.ip6_firewall]
         ask = "IPv6 firewall"
         type = "boolean"
-        bind = "array_settings()"
+        visible = "advanced"
-        visible = "advanced__1"
 
-        [main.hotspot1.dns__1]
+        [main.hotspot.dns]
         ask = "DNS resolvers"
         type = "tags"
-        bind = "array_settings()"
+        visible = "advanced"
-        visible = "advanced__1"
-        pattern.regexp = '^([0-9.]{7,15}|[0-9a-fA-F:]+)$'
-        pattern.error = "Not an ip"
-
-    [main.hotspot2]
-    name = "Hotspot 2"
-    visible = "! no_antenna && multissid >= 2"
-
-        [main.hotspot2.wifi_ssid__2]
-        ask = "Name (SSID)"
-        type = "string"
-        bind = "array_settings()"
-        pattern.regexp = '^[\w \-]{1,32}$'
-        pattern.error = "SSID in this app are limited to letter, number space, dash and underscores."
-
-        [main.hotspot2.wifi_secure__2]
-        ask = "Secure"
-        type = "boolean"
-        bind = "array_settings()"
-
-        [main.hotspot2.wifi_passphrase__2]
-        ask = "Password (WPA2)"
-        type = "string"
-        bind = "array_settings()"
-        redact = true
-        visible = "wifi_secure__2"
-        pattern.regexp = '^[a-zA-Z0-9]{8,63}$'
-        pattern.error = "Only printable alphanumeric characters are permitted in your password. Maximal size 63 chars"
-
-        [main.hotspot2.advanced__2]
-        ask = "Advanced settings"
-        type = "boolean"
-        bind = "array_settings()"
-
-        [main.hotspot2.ip4_nat_prefix__2]
-        ask = "IPv4 NAT prefix (/24)"
-        type = "string"
-        bind = "array_settings()"
-        visible = "advanced__2"
-        pattern.regexp = '^[0-9.]{7,15}$'
-        pattern.error = "Please provide a valid IP"
-
-        [main.hotspot2.ip6_net__2]
-        ask = "IPv6 delegated prefix"
-        type = "string"
-        bind = "array_settings()"
-        visible = "advanced__2"
-        pattern.regexp = '^[0-9a-fA-F:]+$'
-        pattern.error = "Please provide a valid IPv6 Prefix"
-
-        [main.hotspot2.ip6_firewall__2]
-        ask = "IPv6 firewall"
-        type = "boolean"
-        bind = "array_settings()"
-        visible = "advanced__2"
-
-        [main.hotspot2.dns__2]
-        ask = "DNS resolvers"
-        type = "tags"
-        bind = "array_settings()"
-        visible = "advanced__2"
-        pattern.regexp = '^([0-9.]{7,15}|[0-9a-fA-F:]+)$'
-        pattern.error = "Not an ip"
-
-    [main.hotspot3]
-    name = "Hotspot 3"
-    visible = "! no_antenna && multissid >= 3"
-
-        [main.hotspot3.wifi_ssid__3]
-        ask = "Name (SSID)"
-        type = "string"
-        bind = "array_settings()"
-        pattern.regexp = '^[\w \-]{1,32}$'
-        pattern.error = "SSID in this app are limited to letter, number space, dash and underscores."
-
-        [main.hotspot3.wifi_secure__3]
-        ask = "Secure"
-        type = "boolean"
-        bind = "array_settings()"
-
-        [main.hotspot3.wifi_passphrase__3]
-        ask = "Password (WPA2)"
-        type = "string"
-        bind = "array_settings()"
-        redact = true
-        visible = "wifi_secure__3"
-        pattern.regexp = '^[a-zA-Z0-9]{8,63}$'
-        pattern.error = "Only printable alphanumeric characters are permitted in your password. Maximal size 63 chars"
-
-        [main.hotspot3.advanced__3]
-        ask = "Advanced settings"
-        type = "boolean"
-        bind = "array_settings()"
-
-        [main.hotspot3.ip4_nat_prefix__3]
-        ask = "IPv4 NAT prefix (/24)"
-        type = "string"
-        bind = "array_settings()"
-        visible = "advanced__3"
-        pattern.regexp = '^[0-9.]{7,15}$'
-        pattern.error = "Please provide a valid IP"
-
-        [main.hotspot3.ip6_net__3]
-        ask = "IPv6 delegated prefix"
-        type = "string"
-        bind = "array_settings()"
-        visible = "advanced__3"
-        pattern.regexp = '^[0-9a-fA-F:]+$'
-        pattern.error = "Please provide a valid IPv6 Prefix"
-
-        [main.hotspot3.ip6_firewall__3]
-        ask = "IPv6 firewall"
-        type = "boolean"
-        bind = "array_settings()"
-        visible = "advanced__3"
-
-        [main.hotspot3.dns__3]
-        ask = "DNS resolvers"
-        type = "tags"
-        bind = "array_settings()"
-        visible = "advanced__3"
         pattern.regexp = '^([0-9.]{7,15}|[0-9a-fA-F:]+)$'
         pattern.error = "Not an ip"
 

scripts/config

@@ -92,112 +92,49 @@ EOF
     echo "value: '$(ynh_app_setting_get $app wifi_device)'"
 }
 
-get__array_settings() {
-    local short_setting="${1%%__*}"
-    local index="${1#*__}"
-    IFS='|' read -a values <<< "$(ynh_app_setting_get $app $short_setting)"
-    echo "value: \"${values[$(($index - 1))]:-}\""
-}
-
 #=================================================
 # SPECIFIC VALIDATORS FOR TOML SHORT KEYS
 #=================================================
-is_unique() {
+
-    local short_setting="$1"
-    local short_setting__1="$1__1"
-    local short_setting__2="$1__2"
-    local short_setting__3="$1__3"
-    if [[ "${!short_setting__1}" == "${!short_setting__2}" ]]
-    then
-        return 1
-    elif [ "$multissid" -ge "3" ] && [[ "${!short_setting__1}" == "${!short_setting__3}" ]]
-    then
-        return 1
-    elif [ "$multissid" -ge "3" ] && [[ "${!short_setting__2}" == "${!short_setting__3}" ]]
-    then
-        return 1
-    fi
-    return 0
-}
 validate__wifi_ssid() {
-    local wifi_ssid_var="wifi_ssid__$1"
+    if [[ -z "${wifi_ssid}" ]]
-    if [ "$multissid" -ge "$1" ] && [[ -z "${!wifi_ssid_var}" ]]
     then
         echo 'SSID required'
     fi
-    if ! is_unique wifi_ssid
-    then
-        echo 'All Wifi names must be unique'
-    fi
 }
 
 validate__wifi_passphrase() {
-    local wifi_secure_var="wifi_secure__$1"
+    if [[ "${wifi_secure}" == "1" ]] && [[ -z "${wifi_passphrase}" ]]
-    local wifi_passphrase_var="wifi_passphrase__$1"
-    if [ "$multissid" -ge "$1" ] && [[ "${!wifi_secure_var}" == "1" ]] && [[ -z "${!wifi_passphrase_var}" ]]
     then
         echo 'In WPA2 secure mode, you need to provide a passphrase'
     fi
 }
 
 validate__ip4_nat_prefix() {
-    local ip4_nat_prefix_var="ip4_nat_prefix__$1"
+    if [[ -z "${ip4_nat_prefix}" ]]
-    if [ "$multissid" -ge "$1" ] && [[ -z "${!ip4_nat_prefix_var}" ]]
     then
         echo 'Private IPv4 nat prefix required'
     fi
-    if ! is_unique ip4_nat_prefix
-    then
-        echo 'All IPv4 prefix must be unique'
-    fi
 }
 
 validate__dns() {
-    local dns_var="dns__$1"
+    if ! echo "${dns}" | grep -q "\."
-    local ip6_net_var="dns__$1"
-    if [ "$multissid" -ge "$1" ] && ! echo "${!dns_var}" | grep -q "\."
     then
         echo 'IPv4 DNS required'
     fi
-    if [ "$multissid" -ge "$1" ] && [[ -n "${!ip6_net_var}" ]] && ! echo "${!dns_var}" | grep -q ":"
+    if [[ -n "${ip6_net}" ]] && ! echo "${dns}" | grep -q ":"
     then
         echo 'IPv6 DNS required'
     fi
 }
 
-validate__array_settings() {
-    local short_setting="${1%%__*}"
-    local index="${1#*__}"
-    if type -t validate__$short_setting | grep -q '^function$' 2>/dev/null;
-    then
-        validate__$short_setting $index
-    fi
-}
-
 #=================================================
 # SPECIFIC SETTERS FOR TOML SHORT KEYS
 #=================================================
-set__array_settings() {
-    local short_setting="${1%%__*}"
-    local index="${1#*__}"
-    local type="${types[$1]}"
-    local value="${!1}"
-    if [[ "$type" == "string" ]] && [ "$multissid" -lt "$index" ]
-    then
-        value=""
-    fi
-    local values="$(ynh_app_setting_get $app $short_setting | awk "BEGIN{FS=OFS=\"|\"} {\$${index}=\"${value}\"}"1)"
-    ynh_app_setting_set --app=$app --key=$short_setting --value="$values"
-    ynh_print_info --message="Configuration key '$short_setting' edited in app settings"
-}
-
 
 #=================================================
 # OVERWRITING VALIDATE STEP 
 #=================================================
-ynh_app_config_validate() {
-    _ynh_app_config_validate
-}
 
 #=================================================
 # OVERWRITING APPLY STEP 
@@ -210,6 +147,19 @@ ynh_app_config_apply() {
 
     _ynh_app_config_apply
 
+    if [ "${wifi_secure}" -eq 1 ]; then
+        local sec_comment=""
+    else
+        local sec_comment="#"
+    fi
+
+    ynh_add_config --template="/etc/hostapd/hostapd.base.conf" --destination="/etc/hostapd/hostapd-${wifi_device}.conf"
+    ynh_add_config --template="/etc/dnsmasq.dhcpd/dhcpdv4.conf.tpl" --destination"/etc/dnsmasq.dhcpdv4-ssid-${wifi_device}.conf"
+    
+    if [[ -n "${ip6_net}" ]] && [[ "${ip6_net}" != "none" ]]; then
+        ynh_add_config --template="/etc/dnsmasq.dhcpd/dhcpdv6.conf.tpl" --destination"/etc/dnsmasq.dhcpdv6-ssid-${wifi_device}.conf"
+    fi  
+
     # Start vpn client
     ynh_print_info --message="Starting hotspot service if needed"
     /usr/local/bin/ynh-hotspot start

scripts/install

@@ -132,7 +132,6 @@ fi
 hot_reload_usb_wifi_cards
 wifi_device=$(iw_devices | awk -F\| '{ print $1 }')
 
-ynh_app_setting_set --app=$app --key=multissid --value=1
 ynh_app_setting_set --app=$app --key=ssid_nb --value=1
 ynh_app_setting_set --app=$app --key=wifi_ssid --value="${wifi_ssid}"
 ynh_app_setting_set --app=$app --key=wifi_secure --value=1