Merge pull request #33 from YunoHost-Apps/example

Apply example_ynh

.github/ISSUE_TEMPLATE.md

@@ -8,7 +8,7 @@ about: When creating a bug report, please use the following template to provide
 1. *Read this whole template first.*
 2. *Determine if you are on the right place:*
    - *If you were performing an action on the app from the webadmin or the CLI (install, update, backup, restore, change_url...), you are on the right place!*
-   - *Otherwise, the issue may be due to ICEcoder itself. Refer to its documentation or repository for help.*
+   - *Otherwise, the issue may be due to the app itself. Refer to its documentation or repository for help.*
    - *When in doubt, post here and we will figure it out together.*
 3. *Delete the italic comments as you write over them below, and remove this guide.*
 --- 
@@ -31,7 +31,7 @@ about: When creating a bug report, please use the following template to provide
 
 - *If you performed a command from the CLI, the command itself is enough. For example:*
     ```sh
-    sudo yunohost app install icecoder
+    sudo yunohost app install the_app
     ```
 - *If you used the webadmin, please perform the equivalent command from the CLI first.*
 - *If the error occurs in your browser, explain what you did:*

.github/PULL_REQUEST_TEMPLATE.md

@@ -0,0 +1,16 @@
+## Problem
+
+- *Description of why you made this PR*
+
+## Solution
+
+- *And how do you fix that problem*
+
+## PR Status
+
+- [ ] Code finished and ready to be reviewed/tested
+- [ ] The fix/enhancement were manually tested (if applicable)
+
+## Automatic tests
+
+Automatic tests can be triggered on https://ci-apps-dev.yunohost.org/ *after creating the PR*, by commenting "!testme", "!gogogadgetoci" or "By the power of systemd, I invoke The Great App CI to test this Pull Request!". (N.B. : for this to work you need to be a member of the Yunohost-Apps organization)

.gitignore

@@ -1,2 +0,0 @@
-*~
-*.sw[op]

README.md

@@ -1,3 +1,8 @@
+<!--
+N.B.: This README was automatically generated by https://github.com/YunoHost/apps/tree/master/tools/README-generator
+It shall NOT be edited by hand.
+-->
+
 # ICEcoder for YunoHost
 
 [![Integration level](https://dash.yunohost.org/integration/icecoder.svg)](https://dash.yunohost.org/appci/app/icecoder) ![](https://ci-apps.yunohost.org/ci/badges/icecoder.status.svg) ![](https://ci-apps.yunohost.org/ci/badges/icecoder.maintain.svg)  
@@ -9,34 +14,16 @@
 If you don't have YunoHost, please consult [the guide](https://yunohost.org/#/install) to learn how to install it.*
 
 ## Overview
+
 A code editor in your browser.
 
-**Shipped version:** 8.0
 
-## Demo
 
-http://demo.icecoder.net/ICEcoder/
+**Shipped version:** 8.1~ynh1
 
-## Configuration
+**Demo:** http://demo.icecoder.net/ICEcoder/
 
-How to configure this app: From ICEcoder options screen.
+## Disclaimers / important information
-
-## Documentation
-
- * Official documentation: https://icecoder.net/manual
- * YunoHost documentation: If specific documentation is needed, feel free to contribute.
-
-## YunoHost specific features
-
-#### Multi-user support
-
- * Are LDAP and HTTP auth supported? No.
- * Can the app be used by multiple users? Yes (It is internal to the app).
-
-#### Supported architectures
-
-* x86-64 - [![Build Status](https://ci-apps.yunohost.org/ci/logs/icecoder%20%28Apps%29.svg)](https://ci-apps.yunohost.org/ci/apps/icecoder/)
-* ARMv8-A - [![Build Status](https://ci-apps-arm.yunohost.org/ci/logs/icecoder%20%28Apps%29.svg)](https://ci-apps-arm.yunohost.org/ci/apps/icecoder/)
 
 ## Limitations
 
@@ -47,14 +34,13 @@ How to configure this app: From ICEcoder options screen.
 * You will need to configure things like password **directly** in the app.
 * If you change the URL of this app, you don't change the real URL but the internal path (the process is the same as installation).
 
-## Links
+## Documentation and resources
 
+* Official app website: https://icecoder.net
+* Official admin documentation: https://icecoder.net/manual
+* Upstream app code repository: https://github.com/icecoder/ICEcoder
+* YunoHost documentation for this app: https://yunohost.org/app_icecoder
 * Report a bug: https://github.com/YunoHost-Apps/icecoder_ynh/issues
- * App website: https://icecoder.net/
- * Upstream app repository: https://github.com/icecoder/ICEcoder
- * YunoHost website: https://yunohost.org/
-
----
 
 ## Developer info
 
@@ -66,3 +52,5 @@ sudo yunohost app install https://github.com/YunoHost-Apps/icecoder_ynh/tree/tes
 or
 sudo yunohost app upgrade icecoder -u https://github.com/YunoHost-Apps/icecoder_ynh/tree/testing --debug
 ```
+
+**More info regarding app packaging:** https://yunohost.org/packaging_apps

README_fr.md

@@ -4,39 +4,21 @@
 [![Installer ICEcoder avec YunoHost](https://install-app.yunohost.org/install-with-yunohost.svg)](https://install-app.yunohost.org/?app=icecoder)
 
 *[Read this readme in english.](./README.md)*
+*[Lire ce readme en français.](./README_fr.md)*
 
 > *Ce package vous permet d'installer ICEcoder rapidement et simplement sur un serveur YunoHost.
-Si vous n'avez pas YunoHost, consultez [le guide](https://yunohost.org/#/install) pour apprendre comment l'installer.*
+Si vous n'avez pas YunoHost, regardez [ici](https://yunohost.org/#/install) pour savoir comment l'installer et en profiter.*
 
 ## Vue d'ensemble
+
 Un éditeur de code dans votre navigateur.
 
-**Version incluse :** 8.0
 
-## Démo
+**Version incluse :** 8.1~ynh1
 
-* http://demo.icecoder.net/ICEcoder/
+**Démo :** http://demo.icecoder.net/ICEcoder/
 
-## Configuration
+## Avertissements / informations importantes
-
-Comment configurer cette app: Depuis l'écran des options d'ICEcoder
-
-## Documentation
-
- * Documentation officielle: https://icecoder.net/manual
- * Documentation YunoHost : Si une documentation spécifique est nécessaire, n'hésitez pas à contribuer.
-
-## Caractéristiques spécifiques YunoHost
-
-#### Support multi-utilisateurs
-
-* L'authentification LDAP et HTTP est-elle prise en charge ? Non.
-* L'application peut-elle être utilisée par plusieurs utilisateurs ? Non (c'est interne à l'app).
-
-#### Architectures supportées
-
-* x86-64 - [![Build Status](https://ci-apps.yunohost.org/ci/logs/icecoder%20%28Apps%29.svg)](https://ci-apps.yunohost.org/ci/apps/icecoder/)
-* ARMv8-A - [![Build Status](https://ci-apps-arm.yunohost.org/ci/logs/icecoder%20%28Apps%29.svg)](https://ci-apps-arm.yunohost.org/ci/apps/icecoder/)
 
 ## Limitations
 
@@ -47,14 +29,13 @@ Comment configurer cette app: Depuis l'écran des options d'ICEcoder
 * Vous devrez configurer des éléments comme le mot de passe **directement** dans l'application.
 * Si vous changez l'URL de cette application, vous ne changez pas l'URL réelle mais le chemin interne (le processus est le même que pour l'installation).
 
-## Liens
+## Documentations et ressources
 
- * Signaler un bug : https://github.com/YunoHost-Apps/icecoder_ynh/issues
+* Site officiel de l'app : https://icecoder.net
- * Site de l'application : https://icecoder.net
+* Documentation officielle de l'admin : https://icecoder.net/manual
- * Dépôt de l'application principale : https://github.com/icecoder/ICEcoder
+* Dépôt de code officiel de l'app : https://github.com/icecoder/ICEcoder
- * Site web YunoHost : https://yunohost.org/
+* Documentation YunoHost pour cette app : https://yunohost.org/app_icecoder
-
+* Signaler un bug : https://github.com/YunoHost-Apps/icecoder_ynh/issues
----
 
 ## Informations pour les développeurs
 
@@ -66,3 +47,5 @@ sudo yunohost app install https://github.com/YunoHost-Apps/icecoder_ynh/tree/tes
 ou
 sudo yunohost app upgrade icecoder -u https://github.com/YunoHost-Apps/icecoder_ynh/tree/testing --debug
 ```
+
+**Plus d'infos sur le packaging d'applications :** https://yunohost.org/packaging_apps

check_process

@@ -1,18 +1,24 @@
 ;; Test complet
 	; pre-install
-		sudo yunohost app install my_webapp -a domain=domain.tld&path=/site&admin=john&is_public=1&password=pass
+		sudo yunohost app install my_webapp -a "domain=domain.tld&path=/path&with_sftp=1&password=myreallystrengthpassword&is_public=1&phpversion=7.3&with_mysql=1"
 	; Manifest
-		domain="domain.tld"	(DOMAIN)
+		app_id="my_webapp"
-		app_id="my_webapp"	(APP_ID)
+		sub_folder="/www"
+		domain="domain.tld"
+		path="/icecoder"
 	; Checks
 		pkg_linter=1
-		setup_sub_dir=0
+		setup_sub_dir=1
-		setup_root=1
+		setup_root=0
 		setup_nourl=0
 		setup_private=0
 		setup_public=0
 		upgrade=1
+		# upgrade=1	from_commit=CommitHash
 		backup_restore=1
 		multi_instance=0
 		port_already_use=0
 		change_url=1
+;;; Options
+Email=
+Notification=none

doc/DESCRIPTION.md

@@ -0,0 +1,2 @@
+A code editor in your browser.
+

doc/DESCRIPTION_fr.md

@@ -0,0 +1 @@
+Un éditeur de code dans votre navigateur.

doc/DISCLAIMER.md

@@ -0,0 +1,8 @@
+## Limitations
+
+* If the editor's current folder is where the editor is, the editor's folder is visible in the file tree.
+
+## Additional information
+
+* You will need to configure things like password **directly** in the app.
+* If you change the URL of this app, you don't change the real URL but the internal path (the process is the same as installation).

doc/DISCLAIMER_fr.md

@@ -0,0 +1,8 @@
+## Limitations
+
+* Si le dossier actuel de l'éditeur se trouve là où se trouve l'éditeur, le dossier de l'éditeur est visible dans l'arbre des fichiers.
+
+## Informations additionnelles
+
+* Vous devrez configurer des éléments comme le mot de passe **directement** dans l'application.
+* Si vous changez l'URL de cette application, vous ne changez pas l'URL réelle mais le chemin interne (le processus est le même que pour l'installation).

manifest.json

@@ -8,13 +8,20 @@
     },
     "version": "8.1~ynh1",
     "url": "https://icecoder.net",
+    "upstream": {
+        "license": "AGPL-3.0-only",
+        "website": "https://icecoder.net",
+        "demo": "http://demo.icecoder.net/ICEcoder/",
+        "admindoc": "https://icecoder.net/manual",
+        "code": "https://github.com/icecoder/ICEcoder"
+    },
     "license": "AGPL-3.0-only",
     "maintainer": {
         "name": "Stylix58",
         "email": "lateman-jpeg@outlook.fr"
     },
     "requirements": {
-        "yunohost": ">= 4.1.3"
+        "yunohost": ">= 4.3.0"
     },
     "multi_instance": true,
     "services": [
@@ -34,6 +41,19 @@
                     "en": "You can get the ID in Custom Webapp's settings.",
                     "fr": "Vous pouvez obtenir l'ID dans les paramètres de la Custom Webapp."
                 }
+            },
+            {
+                "name": "sub_folder",
+                "type": "path",
+                "ask": {
+                    "en": "Indicate the name of the final_path subfolder containing the files accessible from your browser",
+                    "fr": "Indiquer le nom du sous-dossier du final_path contenant les fichiers accessibles depuis votre navigateur"
+                },
+                "help": {
+                    "en": "For example for Custom Webapp it is located in the /www subfolder.",
+                    "fr": "Par exemple pour Custom Webapp il se situe dans le sous-dossier /www."
+                },
+                "default": "/www"
             }
         ]
     }

pull_request_template.md

@@ -1,16 +0,0 @@
-## Problem
-- *Description of why you made this PR*
-
-## Solution
-- *And how do you fix that problem*
-
-## PR Status
-- [ ] Code finished.
-- [ ] Tested with Package_check.
-- [ ] Fix or enhancement tested.
-- [ ] Upgrade from last version tested.
-- [ ] Can be reviewed and tested.
-
-## Package_check results
----
-* An automatic package_check will be launch at https://ci-apps-dev.yunohost.org/, when you add a specific comment to your Pull Request: "!testme", "!gogogadgetoci" or "By the power of systemd, I invoke The Great App CI to test this Pull Request!"* (You can only do this with an opened Pull Request)

scripts/backup

@@ -25,19 +25,12 @@ ynh_print_info --message="Loading installation settings..."
 app=$YNH_APP_INSTANCE_NAME
 
 final_path=$(ynh_app_setting_get --app=$app --key=final_path)
-domain=$(ynh_app_setting_get --app=$app --key=domain)
-phpversion=$(ynh_app_setting_get --app=$app --key=phpversion)
 
 #=================================================
 # DECLARE DATA AND CONF FILES TO BACKUP
 #=================================================
 ynh_print_info --message="Declaring files to be backed up..."
 
-### N.B. : the following 'ynh_backup' calls are only a *declaration* of what needs
-### to be backuped and not an actual copy of any file. The actual backup that
-### creates and fill the archive with the files happens in the core after this
-### script is called. Hence ynh_backups calls takes basically 0 seconds to run.
-
 #=================================================
 # BACKUP THE APP MAIN DIR
 #=================================================

scripts/change_url

@@ -1,80 +0,0 @@
-#!/bin/bash
-
-#=================================================
-# GENERIC STARTING
-#=================================================
-# IMPORT GENERIC HELPERS
-#=================================================
-
-source _common.sh
-source /usr/share/yunohost/helpers
-
-#=================================================
-# RETRIEVE ARGUMENTS
-#=================================================
-
-old_domain=$YNH_APP_OLD_DOMAIN
-old_path=$YNH_APP_OLD_PATH
-
-new_domain=$YNH_APP_NEW_DOMAIN
-new_path=$YNH_APP_NEW_PATH
-
-app=$YNH_APP_INSTANCE_NAME
-
-#=================================================
-# LOAD SETTINGS
-#=================================================
-ynh_script_progression --message="Loading installation settings..." --weight=1
-
-# Needed for helper "ynh_add_nginx_config"
-final_path=$(ynh_app_setting_get --app=$app --key=final_path)
-
-# Add settings here as needed by your application
-#db_name=$(ynh_app_setting_get --app=$app --key=db_name)
-#db_user=$db_name
-#db_pwd=$(ynh_app_setting_get --app=$app --key=db_pwd)
-
-#=================================================
-# BACKUP BEFORE UPGRADE THEN ACTIVE TRAP
-#=================================================
-ynh_script_progression --message="Backing up the app before changing its URL (may take a while)..." --weight=1
-
-# Backup the current version of the app
-ynh_backup_before_upgrade
-ynh_clean_setup () {
-	# Remove the new domain config file, the remove script won't do it as it doesn't know yet its location.
-	ynh_secure_remove --file="/etc/nginx/conf.d/$new_domain.d/$app.conf"
-
-	# Restore it if the upgrade fails
-	ynh_restore_upgradebackup
-}
-# Exit if an error occurs during the execution of the script
-ynh_abort_if_errors
-
-#=================================================
-# CHECK WHICH PARTS SHOULD BE CHANGED
-#=================================================
-
-change_domain=0
-if [ "$old_domain" != "$new_domain" ]
-then
-	change_domain=1
-fi
-
-change_path=0
-if [ "$old_path" != "$new_path" ]
-then
-	change_path=1
-fi
-
-#=================================================
-# SPECIFIC MODIFICATIONS
-#=================================================
-# TODO: really automatize permissiosn system
-#=================================================
-
-#=================================================
-# END OF SCRIPT
-#=================================================
-
-ynh_script_progression --message="Change of URL completed for $app" --last

scripts/install

@@ -21,94 +21,44 @@ ynh_abort_if_errors
 #=================================================
 
 app_id=$YNH_APP_ARG_APP_ID
-path_url="/in-$app_id-folder"
+sub_folder=$YNH_APP_ARG_SUB_FOLDER
 
-### If it's a multi-instance app, meaning it can be installed several times independently
-### The id of the app as stated in the manifest is available as $YNH_APP_ID
-### The instance number is available as $YNH_APP_INSTANCE_NUMBER (equals "1", "2"...)
-### The app instance name is available as $YNH_APP_INSTANCE_NAME
-###    - the first time the app is installed, YNH_APP_INSTANCE_NAME = ynhexample
-###    - the second time the app is installed, YNH_APP_INSTANCE_NAME = ynhexample__2
-###    - ynhexample__{N} for the subsequent installations, with N=3,4...
-### The app instance name is probably what interests you most, since this is
-### guaranteed to be unique. This is a good unique identifier to define installation path,
-### db names...
 app=$YNH_APP_INSTANCE_NAME
 
 #=================================================
 # CHECK IF THE APP CAN BE INSTALLED WITH THESE ARGS
 #=================================================
-### About --weight and --time
+ynh_script_progression --message="Validating installation parameters..."
-### ynh_script_progression will show to your final users the progression of each scripts.
-### In order to do that, --weight will represent the relative time of execution compared to the other steps in the script.
-### --time is a packager option, it will show you the execution time since the previous call.
-### This option should be removed before releasing your app.
-### Use the execution time, given by --time, to estimate the weight of a step.
-### A common way to do it is to set a weight equal to the execution time in second +1.
-### The execution time is given for the duration since the previous call. So the weight should be applied to this previous call.
-ynh_script_progression --message="Validating installation parameters..." --weight=1
 
-### If the app uses NGINX as web server (written in HTML/PHP in most cases), the final path should be "/var/www/$app".
+final_path=$(ynh_app_setting_get --app=$app_id --key=final_path)$sub_folder/icecoder
-### If the app provides an internal web server (or uses another application server such as uWSGI), the final path should be "/opt/yunohost/$app"
+test -e "$(ynh_app_setting_get --app=$app_id --key=final_path)" || ynh_die --message="You don't have installed $app_id before installing this app"
-final_path=/var/www/$YNH_APP_ARG_APP_ID/www/icecoder
-
-#test ! -e "/var/www/$YNH_APP_ARG_APP_ID/icecoder" || ynh_die --message="You have already installed a app instance here before install this app instance"
-test -e "/var/www/$YNH_APP_ARG_APP_ID" || ynh_die --message="You don't have installed a webapp before install this app"
 test ! -e "$final_path" || ynh_die --message="This path already contains a folder"
 
 #=================================================
 # STORE SETTINGS FROM MANIFEST
 #=================================================
-ynh_script_progression --message="Storing installation settings..."  --weight=1
+ynh_script_progression --message="Storing installation settings..."
 
-ynh_app_setting_set --app=$app --key=domain --value=none.ynh.fr
-ynh_app_setting_set --app=$app --key=path --value=$path_url
 ynh_app_setting_set --app=$app --key=app_id --value=$app_id
+ynh_app_setting_set --app=$app --key=sub_folder --value=$sub_folder
 
 #=================================================
 # DOWNLOAD, CHECK AND UNPACK SOURCE
 #=================================================
-ynh_script_progression --message="Setting up source files..." --weight=1
+ynh_script_progression --message="Setting up source files..."
-
-### `ynh_setup_source` is used to install an app from a zip or tar.gz file,
-### downloaded from an upstream source, like a git repository.
-### `ynh_setup_source` use the file conf/app.src
 
 ynh_app_setting_set --app=$app --key=final_path --value=$final_path
 # Download, check integrity, uncompress and patch the source from app.src
 ynh_setup_source --dest_dir="$final_path"
 
+chmod 750 "$final_path"
+chmod -R o-rwx "$final_path"
+chown -R $app_id:www-data "$final_path"
+
 #=================================================
 # GENERIC FINALIZATION
-#=================================================
-# SECURE FILES AND DIRECTORIES
-#=================================================
-
-### For security reason, any app should set the permissions to root: before anything else.
-### Then, if write authorization is needed, any access should be given only to directories
-### that really need such authorization.
-
-# Set permissions to app files
-chown -R $YNH_APP_ARG_APP_ID $final_path
-
-#=================================================
-# SETUP LOGROTATE
-#=================================================
-ynh_script_progression --message="Configuring log rotation..." --weight=1
-
-### `ynh_use_logrotate` is used to configure a logrotate configuration for the logs of this app.
-### Use this helper only if there is effectively a log file for this app.
-### If you're not using this helper:
-###		- Remove the section "BACKUP LOGROTATE" in the backup script
-###		- Remove also the section "REMOVE LOGROTATE CONFIGURATION" in the remove script
-###		- As well as the section "RESTORE THE LOGROTATE CONFIGURATION" in the restore script
-###		- And the section "SETUP LOGROTATE" in the upgrade script
-
-# Use logrotate to manage application logfile(s)
-ynh_use_logrotate
-
 #=================================================
 # END OF SCRIPT
 #=================================================
 
-ynh_script_progression --message="Installation of $app completed" --last
+ynh_script_progression --message="Installation of $app completed"

scripts/remove

@@ -12,17 +12,18 @@ source /usr/share/yunohost/helpers
 #=================================================
 # LOAD SETTINGS
 #=================================================
-ynh_script_progression --message="Loading installation settings..." --weight=1
+ynh_script_progression --message="Loading installation settings..."
 
 app=$YNH_APP_INSTANCE_NAME
 
-domain=$(ynh_app_setting_get --app=$app --key=domain)
 final_path=$(ynh_app_setting_get --app=$app --key=final_path)
 
+#=================================================
+# STANDARD REMOVE
 #=================================================
 # REMOVE APP MAIN DIR
 #=================================================
-ynh_script_progression --message="Removing app main directory..." --weight=1
+ynh_script_progression --message="Removing app main directory..."
 
 # Remove the app directory securely
 ynh_secure_remove --file="$final_path"
@@ -31,4 +32,4 @@ ynh_secure_remove --file="$final_path"
 # END OF SCRIPT
 #=================================================
 
-ynh_script_progression --message="Removal of $app completed" --last
+ynh_script_progression --message="Removal of $app completed"

scripts/restore

@@ -20,51 +20,36 @@ ynh_abort_if_errors
 #=================================================
 # LOAD SETTINGS
 #=================================================
-ynh_script_progression --message="Loading installation settings..." --weight=1
+ynh_script_progression --message="Loading installation settings..."
 
 app=$YNH_APP_INSTANCE_NAME
 
-domain=$(ynh_app_setting_get --app=$app --key=domain)
-path_url=$(ynh_app_setting_get --app=$app --key=path)
 final_path=$(ynh_app_setting_get --app=$app --key=final_path)
 app_id=$(ynh_app_setting_get --app=$app --key=app_id)
+sub_folder=$(ynh_app_setting_get --app=$app --key=sub_folder)
 
 #=================================================
 # CHECK IF THE APP CAN BE RESTORED
 #=================================================
-ynh_script_progression --message="Validating restoration parameters..." --weight=1
+ynh_script_progression --message="Validating restoration parameters..."
 
-#test ! -e "/var/www/$YNH_APP_ARG_APP_ID/icecoder" || ynh_die --message="You have already restored a app instance here before restore this app instance!"
+test -e "$(ynh_app_setting_get --app=$app_id --key=final_path)" || ynh_die --message="You don't have installed $app_id before installing this app"
-test -e "/var/www/$YNH_APP_ARG_APP_ID" || ynh_die --message="You don't have installed a webapp before restore this app!"
+test ! -e "$final_path" || ynh_die --message="This path already contains a folder"
-
-ynh_webpath_available --domain=$domain --path_url=$path_url \
-	|| ynh_die --message="Path not available: ${domain}${path_url}"
-test ! -d $final_path \
-	|| ynh_die --message="There is already a directory: $final_path "
 
 #=================================================
 # STANDARD RESTORATION STEPS
-#=================================================
-# RESTORE THE NGINX CONFIGURATION
-#=================================================
-
-ynh_restore_file --origin_path="/etc/nginx/conf.d/$domain.d/$app.conf"
-
 #=================================================
 # RESTORE THE APP MAIN DIR
 #=================================================
-ynh_script_progression --message="Restoring the app main directory..." --weight=1
+ynh_script_progression --message="Restoring the app main directory..."
 
 ynh_restore_file --origin_path="$final_path"
 
-#=================================================
+chmod 750 "$final_path"
-# RESTORE USER RIGHTS
+chmod -R o-rwx "$final_path"
-#=================================================
+chown -R $app_id:www-data "$final_path"
-
-chown -R $app_id $final_path
-
 #=================================================
 # END OF SCRIPT
 #=================================================
 
-ynh_script_progression --message="Restoration completed for $app" --last
+ynh_script_progression --message="Restoration completed for $app"

scripts/upgrade

@@ -12,73 +12,24 @@ source /usr/share/yunohost/helpers
 #=================================================
 # LOAD SETTINGS
 #=================================================
-ynh_script_progression --message="Loading installation settings..." --weight=1
+ynh_script_progression --message="Loading installation settings..."
 
 app=$YNH_APP_INSTANCE_NAME
 
-domain=$(ynh_app_setting_get --app=$app --key=domain)
+app_id=$(ynh_app_setting_get --app=$app --key=app_id)
-path_url=$(ynh_app_setting_get --app=$app --key=path)
 final_path=$(ynh_app_setting_get --app=$app --key=final_path)
 
 #=================================================
 # CHECK VERSION
 #=================================================
+ynh_script_progression --message="Checking version..."
 
-### This helper will compare the version of the currently installed app and the version of the upstream package.
-### $upgrade_type can have 2 different values
-### - UPGRADEsome_config_file_APP if the upstream app version has changed
-### - UPGRADE_PACKAGE if only the YunoHost package has changed
-### ynh_check_app_version_changed will stop the upgrade if the app is up to date.
-### UPGRADE_APP should be used to upgrade the core app only if there's an upgrade to do.
 upgrade_type=$(ynh_check_app_version_changed)
 
-#=================================================
-# ENSURE DOWNWARD COMPATIBILITY
-#=================================================
-ynh_script_progression --message="Ensuring downward compatibility..." --weight=1
-
-#
-# N.B. : the followings setting migrations snippets are provided as *EXAMPLES*
-# of what you may want to do in some cases (e.g. a setting was not defined on
-# some legacy installs and you therefore want to initiaze stuff during upgrade)
-#
-
-# If db_name doesn't exist, create it
-#if [ -z "$db_name" ]; then
-#	db_name=$(ynh_sanitize_dbid --db_name=$app)
-#	ynh_app_setting_set --app=$app --key=db_name --value=$db_name
-#fi
-
-# If final_path doesn't exist, create it
-#if [ -z "$final_path" ]; then
-#	final_path=/var/www/$app
-#	ynh_app_setting_set --app=$app --key=final_path --value=$final_path
-#fi
-
-### If nobody installed your app before 4.1,
-### then you may safely remove these lines
-
-# Cleaning legacy permissions
-if ynh_legacy_permissions_exists; then
-	ynh_legacy_permissions_delete_all
-
-	ynh_app_setting_delete --app=$app --key=is_public
-fi
-
-if ! ynh_permission_exists --permission="admin"; then
-	# Create the required permissions
-	ynh_permission_create --permission="admin" --url="/admin" --allowed=$admin
-fi
-
-# Create a permission if needed
-if ! ynh_permission_exists --permission="api"; then
-	ynh_permission_create --permission="api" --url "/api" --allowed="visitors" --show_tile="false" --protected="true"
-fi
-
 #=================================================
 # BACKUP BEFORE UPGRADE THEN ACTIVE TRAP
 #=================================================
-ynh_script_progression --message="Backing up the app before upgrading (may take a while)..." --weight=1
+ynh_script_progression --message="Backing up the app before upgrading (may take a while)..."
 
 # Backup the current version of the app
 ynh_backup_before_upgrade
@@ -89,29 +40,31 @@ ynh_clean_setup () {
 # Exit if an error occurs during the execution of the script
 ynh_abort_if_errors
 
+#=================================================
+# ENSURE DOWNWARD COMPATIBILITY
+#=================================================
+ynh_script_progression --message="Ensuring downward compatibility..."
+
 #=================================================
 # DOWNLOAD, CHECK AND UNPACK SOURCE
 #=================================================
 
 if [ "$upgrade_type" == "UPGRADE_APP" ]
 then
-	ynh_script_progression --message="Upgrading source files..." --weight=1
+	ynh_script_progression --message="Upgrading source files..."
 
 	# Download, check integrity, uncompress and patch the source from app.src
-	ynh_setup_source --dest_dir="$final_path"
+	ynh_setup_source --dest_dir="$final_path" --keep="/data"
 fi
 
+chmod 750 "$final_path"
+chmod -R o-rwx "$final_path"
+chown -R $app_id:www-data "$final_path"
+
 #=================================================
 # GENERIC FINALIZATION
-#=================================================
-# PERMISSIONS SETUP
-#=================================================
-
-# Configure internal permissions for ICEcoder
-chown -R $app $final_path
-
 #=================================================
 # END OF SCRIPT
 #=================================================
 
-ynh_script_progression --message="Upgrade of $app completed" --last
+ynh_script_progression --message="Upgrade of $app completed"