diff --git a/conf/nginx.conf b/conf/nginx.conf index 521cf79..4b8549c 100644 --- a/conf/nginx.conf +++ b/conf/nginx.conf @@ -18,7 +18,7 @@ location __PATH__/ { location ~ ^__PATH__/lib/functions.js.php { fastcgi_split_path_info ^(.+?\.php)(/.*)$; - fastcgi_pass unix:/var/run/php5-fpm-__NAME__.sock; + fastcgi_pass unix:/var/run/php/php7.0-fpm-__NAME__.sock; fastcgi_index index.php; include fastcgi_params; fastcgi_param REMOTE_USER $remote_user; @@ -34,7 +34,7 @@ location __PATH__/ { location ~ [^/]\.php(/|$) { fastcgi_split_path_info ^(.+?\.php)(/.*)$; - fastcgi_pass unix:/var/run/php5-fpm-__NAME__.sock; + fastcgi_pass unix:/var/run/php/php7.0-fpm-__NAME__.sock; fastcgi_index index.php; include fastcgi_params; fastcgi_param REMOTE_USER $remote_user; diff --git a/conf/php-fpm.conf b/conf/php-fpm.conf index 0fb9f64..b7b1cb5 100644 --- a/conf/php-fpm.conf +++ b/conf/php-fpm.conf @@ -1,10 +1,11 @@ ; Start a new pool named 'www'. -; the variable $pool can we used in any directive and will be replaced by the +; the variable $pool can be used in any directive and will be replaced by the ; pool name ('www' here) [__NAMETOCHANGE__] ; Per pool prefix ; It only applies on the following directives: +; - 'access.log' ; - 'slowlog' ; - 'listen' (unixsocket) ; - 'chroot' @@ -24,28 +25,35 @@ group = __USER__ ; The address on which to accept FastCGI requests. ; Valid syntaxes are: -; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific address on +; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific IPv4 address on ; a specific port; -; 'port' - to listen on a TCP socket to all addresses on a -; specific port; +; '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on +; a specific port; +; 'port' - to listen on a TCP socket to all addresses +; (IPv6 and IPv4-mapped) on a specific port; ; '/path/to/unix/socket' - to listen on a unix socket. ; Note: This value is mandatory. -listen = /var/run/php5-fpm-__NAMETOCHANGE__.sock +listen = /var/run/php/php7.0-fpm-__NAMETOCHANGE__.sock ; Set listen(2) backlog. -; Default Value: 128 (-1 on FreeBSD and OpenBSD) -;listen.backlog = 128 +; Default Value: 511 (-1 on FreeBSD and OpenBSD) +;listen.backlog = 511 ; Set permissions for unix socket, if one is used. In Linux, read/write ; permissions must be set in order to allow connections from a web server. Many -; BSD-derived systems allow connections regardless of permissions. +; BSD-derived systems allow connections regardless of permissions. ; Default Values: user and group are set as the running user ; mode is set to 0660 listen.owner = www-data listen.group = www-data -listen.mode = 0600 - -; List of ipv4 addresses of FastCGI clients which are allowed to connect. +;listen.mode = 0660 +; When POSIX Access Control Lists are supported you can set them using +; these options, value is a comma separated list of user/group names. +; When set, listen.owner and listen.group are ignored +;listen.acl_users = +;listen.acl_groups = + +; List of addresses (IPv4/IPv6) of FastCGI clients which are allowed to connect. ; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original ; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address ; must be separated by a comma. If this value is left blank, connections will be @@ -59,7 +67,13 @@ listen.mode = 0600 ; - The pool processes will inherit the master process priority ; unless it specified otherwise ; Default Value: no set -; priority = -19 +; process.priority = -19 + +; Set the process dumpable flag (PR_SET_DUMPABLE prctl) even if the process user +; or group is differrent than the master process user. It allows to create process +; core dump and ptrace the process for the pool user. +; Default Value: no +; process.dumpable = yes ; Choose how the process manager will control the number of child processes. ; Possible Values: @@ -122,7 +136,7 @@ pm.max_spare_servers = 5 ; This can be useful to work around memory leaks in 3rd party libraries. For ; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS. ; Default Value: 0 -pm.max_requests = 500 +;pm.max_requests = 500 ; The URI to view the FPM status page. If this value is not set, no URI will be ; recognized as a status page. It shows the following informations: @@ -170,7 +184,7 @@ pm.max_requests = 500 ; ; By default the status page only outputs short status. Passing 'full' in the ; query string will also return status for each pool process. -; Example: +; Example: ; http://www.foo.bar/status?full ; http://www.foo.bar/status?json&full ; http://www.foo.bar/status?html&full @@ -215,13 +229,30 @@ pm.max_requests = 500 ; last request memory: 0 ; ; Note: There is a real-time FPM status monitoring sample web page available -; It's available in: ${prefix}/share/fpm/status.html +; It's available in: /usr/share/php/7.0/fpm/status.html ; ; Note: The value must start with a leading slash (/). The value can be ; anything, but it may not be a good idea to use the .php extension or it ; may conflict with a real PHP file. ; Default Value: not set -pm.status_path = /fpm-status +;pm.status_path = /status + +; The ping URI to call the monitoring page of FPM. If this value is not set, no +; URI will be recognized as a ping page. This could be used to test from outside +; that FPM is alive and responding, or to +; - create a graph of FPM availability (rrd or such); +; - remove a server from a group if it is not responding (load balancing); +; - trigger alerts for the operating team (24/7). +; Note: The value must start with a leading slash (/). The value can be +; anything, but it may not be a good idea to use the .php extension or it +; may conflict with a real PHP file. +; Default Value: not set +;ping.path = /ping + +; This directive may be used to customize the response of a ping request. The +; response is formatted as text/plain with a 200 response code. +; Default Value: pong +;ping.response = pong ; The access log file ; Default: not set @@ -258,7 +289,7 @@ pm.status_path = /fpm-status ; - %{megabytes}M ; - %{mega}M ; %n: pool name -; %o: ouput header +; %o: output header ; it must be associated with embraces to specify the name of the header: ; - %{Content-Type}o ; - %{X-Powered-By}o @@ -266,7 +297,7 @@ pm.status_path = /fpm-status ; - .... ; %p: PID of the child that serviced the request ; %P: PID of the parent of the child that serviced the request -; %q: the query string +; %q: the query string ; %Q: the '?' character if query string exists ; %r: the request URI (without the query string, see %q and %Q) ; %R: remote IP address @@ -274,40 +305,44 @@ pm.status_path = /fpm-status ; %t: server time the request was received ; it can accept a strftime(3) format: ; %d/%b/%Y:%H:%M:%S %z (default) +; The strftime(3) format must be encapsuled in a %{}t tag +; e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t ; %T: time the log has been written (the request has finished) ; it can accept a strftime(3) format: ; %d/%b/%Y:%H:%M:%S %z (default) +; The strftime(3) format must be encapsuled in a %{}t tag +; e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t ; %u: remote user ; ; Default: "%R - %u %t \"%m %r\" %s" ;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%" - + ; The log file for slow requests ; Default Value: not set ; Note: slowlog is mandatory if request_slowlog_timeout is set -slowlog = /var/log/nginx/__NAMETOCHANGE__.slow.log - +;slowlog = log/$pool.log.slow + ; The timeout for serving a single request after which a PHP backtrace will be ; dumped to the 'slowlog' file. A value of '0s' means 'off'. ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) ; Default Value: 0 -request_slowlog_timeout = 5s - +;request_slowlog_timeout = 0 + ; The timeout for serving a single request after which the worker process will ; be killed. This option should be used when the 'max_execution_time' ini option ; does not stop script execution for some reason. A value of '0' means 'off'. ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) ; Default Value: 0 request_terminate_timeout = 1d - + ; Set open file descriptor rlimit. ; Default Value: system defined value -rlimit_files = 4096 - +;rlimit_files = 1024 + ; Set max core size rlimit. ; Possible Values: 'unlimited' or an integer greater or equal to 0 ; Default Value: system defined value -rlimit_core = 0 +;rlimit_core = 0 ; Chroot to this directory at the start. This value must be defined as an ; absolute path. When this value is not set, chroot is not used. @@ -319,27 +354,36 @@ rlimit_core = 0 ; (error_log, sessions.save_path, ...). ; Default Value: not set ;chroot = - + ; Chdir to this directory at the start. ; Note: relative path can be used. ; Default Value: current directory or / when chroot chdir = __FINALPATH__ - + ; Redirect worker stdout and stderr into main error log. If not set, stdout and ; stderr will be redirected to /dev/null according to FastCGI specs. ; Note: on highloaded environement, this can cause some delay in the page ; process time (several ms). ; Default Value: no -catch_workers_output = yes +;catch_workers_output = yes + +; Clear environment in FPM workers +; Prevents arbitrary environment variables from reaching FPM worker processes +; by clearing the environment in workers before env vars specified in this +; pool configuration are added. +; Setting to "no" will make all environment variables available to PHP code +; via getenv(), $_ENV and $_SERVER. +; Default Value: yes +;clear_env = no ; Limits the extensions of the main script FPM will allow to parse. This can ; prevent configuration mistakes on the web server side. You should only limit ; FPM to .php extensions to prevent malicious users to use other extensions to -; exectute php code. +; execute php code. ; Note: set an empty value to allow all extensions. ; Default Value: .php -;security.limit_extensions = .php .php3 .php4 .php5 - +;security.limit_extensions = .php .php3 .php4 .php5 .php7 + ; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from ; the current environment. ; Default Value: clean env @@ -353,7 +397,7 @@ catch_workers_output = yes ; overwrite the values previously defined in the php.ini. The directives are the ; same as the PHP SAPI: ; php_value/php_flag - you can set classic ini defines which can -; be overwritten from PHP call 'ini_set'. +; be overwritten from PHP call 'ini_set'. ; php_admin_value/php_admin_flag - these directives won't be overwritten by ; PHP call 'ini_set' ; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no. @@ -374,5 +418,15 @@ catch_workers_output = yes ;php_admin_flag[log_errors] = on ;php_admin_value[memory_limit] = 32M +; Common values to change to increase file upload limit +; php_admin_value[upload_max_filesize] = 50M +; php_admin_value[post_max_size] = 50M +; php_admin_flag[mail.add_x_header] = Off + +; Other common parameters +; php_admin_value[max_execution_time] = 600 +; php_admin_value[max_input_time] = 300 +; php_admin_value[memory_limit] = 256M +; php_admin_flag[short_open_tag] = On php_admin_value[upload_max_filesize] = 10G php_admin_value[post_max_size] = 10G diff --git a/manifest.json b/manifest.json index fc4137a..f64b6bc 100644 --- a/manifest.json +++ b/manifest.json @@ -2,9 +2,6 @@ "name": "Jirafeau", "id": "jirafeau", "packaging_format": 1, - "requirements": { - "yunohost": ">= 2.7.12" - }, "description": { "en": "Upload a file in a simple way and give a unique link to it", "fr": "Hébergez simplement un fichier et partagez-le avec un lien unique" @@ -16,10 +13,13 @@ "name": "julien", "email": "julien.malik@paraiso.me" }, + "requirements": { + "yunohost": ">= 3.0" + }, "multi_instance": false, "services": [ "nginx", - "php5-fpm" + "php7.0-fpm" ], "arguments": { "install" : [ diff --git a/scripts/backup b/scripts/backup index 6551277..abd437d 100644 --- a/scripts/backup +++ b/scripts/backup @@ -50,4 +50,4 @@ ynh_backup "/etc/nginx/conf.d/$domain.d/$app.conf" # BACKUP OF THE PHP-FPM CONFIGURATION #================================================= -ynh_backup "/etc/php5/fpm/pool.d/$app.conf" +ynh_backup "/etc/php/7.0/fpm/pool.d/$app.conf" diff --git a/scripts/restore b/scripts/restore index 425d1fa..12ae02c 100644 --- a/scripts/restore +++ b/scripts/restore @@ -59,7 +59,7 @@ ynh_system_user_create $app # RESTORE THE PHP-FPM CONFIGURATION #================================================= -ynh_restore_file "/etc/php5/fpm/pool.d/$app.conf" +ynh_restore_file "/etc/php/7.0/fpm/pool.d/$app.conf" #================================================= # SPECIFIC RESTORE @@ -81,5 +81,5 @@ chown -R $app:root /home/yunohost.app/$app # RELOAD NGINX AND PHP-FPM #================================================= -sudo systemctl reload php5-fpm -sudo systemctl reload nginx +systemctl reload php7.0-fpm +systemctl reload nginx