YunoHost-Apps/jump_ynh
1
0
Fork 0
mirror of https://github.com/YunoHost-Apps/jump_ynh.git synced 2024-09-03 20:36:28 +02:00
Code Issues Activity Actions
jump_ynh/scripts/install
longbowman ce3869c7e2 initial commit
2024-04-23 22:15:34 +04:00

349 lines
15 KiB
Bash
Executable file
Raw Permalink Blame History

#!/bin/bash
#=================================================
# IMPORT GENERIC HELPERS
#=================================================
source _common.sh
source /usr/share/yunohost/helpers
### Install parameters are automatically saved as settings
###
### Settings are automatically loaded as bash variables
### in every app script context, therefore typically these will exist:
### - $domain
### - $path
### - $language
### ... etc
###
### Resources defined in the manifest are provisioned prior to this script
### and corresponding settings are also available, such as:
### - $install_dir
### - $port
### - $db_name
### ...
###
### $app is the app id (i.e. 'example' for first install,
### or 'example__2', '__3', ... for multi-instance installs)
#=================================================
# INITIALIZE AND STORE SETTINGS
#=================================================
# If you need to, you can define custom settings
# (or remove this section entirely if not relevant for you)
ynh_app_setting_set --app=$app --key=SITENAME --value=$site_name
ynh_app_setting_set --app=$app --key=SHOWCLOCK --value=$show_clock
ynh_app_setting_set --app=$app --key=AMPMCLOCK --value=$am_pm_clock
ynh_app_setting_set --app=$app --key=SHOWGREETING --value=$show_greeting
ynh_app_setting_set --app=$app --key=SHOWSEARCH --value=$show_search
ynh_app_setting_set --app=$app --key=ALTLAYOUT --value=$alt_layout
ynh_app_setting_set --app=$app --key=CUSTOMWIDTH --value=$custom_width
ynh_app_setting_set --app=$app --key=BGBLUR --value=$bg_blur
ynh_app_setting_set --app=$app --key=BGBRIGHT --value=$bg_bright
ynh_app_setting_set --app=$app --key=UNSPLASHAPIKEY --value=$unsplash_api_key
ynh_app_setting_set --app=$app --key=UNSPLASHCOLLECTIONS --value=$unsplash_collections
ynh_app_setting_set --app=$app --key=ALTBGPROVIDER --value=$alt_bg_provider
ynh_app_setting_set --app=$app --key=OWMAPIKEY --value=$owm_api_key
ynh_app_setting_set --app=$app --key=LATLONG --value=$lat_long
ynh_app_setting_set --app=$app --key=METRICTEMP --value=$metric_temp
ynh_app_setting_set --app=$app --key=CHECKSTATUS --value=$check_status
ynh_app_setting_set --app=$app --key=STATUSCACHE --value=$status_cache
ynh_app_setting_set --app=$app --key=CACHEBYPASS --value=$cache_bypass
ynh_app_setting_set --app=$app --key=WWWURL --value=$www_url
ynh_app_setting_set --app=$app --key=DISABLEIPV6 --value=$disable_ip6
#=================================================
# DOWNLOAD, CHECK AND UNPACK SOURCE
#=================================================
ynh_script_progression --message="Setting up source files..." --weight=1
### `ynh_setup_source` is used to install an app from a zip or tar.gz file,
### downloaded from an upstream source, like a git repository.
### `ynh_setup_source` use the file manifest.toml
# Download, check integrity, uncompress and patch the source from manifest.toml
ynh_setup_source --dest_dir="$install_dir"
#=================================================
# APP INITIAL CONFIGURATION
#=================================================
ynh_script_progression --message="Adding $app's configuration files..." --weight=1
update-alternatives --set php /usr/bin/php8.1
export COMPOSER_HOME="/home/user/.config/composer"
echo "export COMPOSER_HOME=\"/home/user/.config/composer\"" >> ~/.bashrc
mkdir -p $COMPOSER_HOME
#rm -f /etc/php/8.1/fpm/pool.d/jump.conf
### You can add specific configuration files.
###
### Typically, put your template conf file in ../conf/your_config_file
### The template may contain strings such as __FOO__ or __FOO_BAR__,
### which will automatically be replaced by the values of $foo and $foo_bar
###
### ynh_add_config will also keep track of the config file's checksum,
### which later during upgrade may allow to automatically backup the config file
### if it's found that the file was manually modified
###
### Check the documentation of `ynh_add_config` for more info.
ynh_add_config --template="php.ini" --destination="/etc/php/8.1/cgi/conf.d/30-jump.ini"
chmod 755 "/etc/php/8.1/cgi/conf.d/30-jump.ini"
# FIXME: this should be handled by the core in the future
### You may need to use chmod 600 instead of 400,
### for example if the app is expected to be able to modify its own config
#chmod 400 "/etc/php81/conf.d/custom.ini"
#chown "$app:$app" "/etc/php81/conf.d/custom.ini"
#mkdir -p /var/www/cache/application \
# && chown -R jumpapp:jumpapp /var/www/html /var/www/cache/application
### For more complex cases where you want to replace stuff using regexes,
### you shoud rely on ynh_replace_string (which is basically a wrapper for sed)
### When doing so, you also need to manually call ynh_store_file_checksum
###
### ynh_replace_string --match_string="match_string" --replace_string="replace_string" --target_file="$install_dir/some_config_file"
### ynh_store_file_checksum --file="$install_dir/some_config_file"
#=================================================
# SYSTEM CONFIGURATION
#=================================================
ynh_script_progression --message="Adding system configurations related to $app..." --weight=1
### `ynh_add_fpm_config` is used to set up a PHP config.
### You can remove it if your app doesn't use PHP.
### `ynh_add_fpm_config` will use the files conf/extra_php-fpm.conf
### If you're not using these lines:
### - You can remove these files in conf/.
### - Remove the section "BACKUP THE PHP-FPM CONFIGURATION" in the backup script
### - Remove also the section "REMOVE PHP-FPM CONFIGURATION" in the remove script
### - As well as the section "RESTORE THE PHP-FPM CONFIGURATION" in the restore script
### with the reload at the end of the script.
### - And the section "PHP-FPM CONFIGURATION" in the upgrade script
# Create a PHP-FPM config (with conf/extra_php-fpm.conf being appended to it)
ynh_add_fpm_config
# Create a dedicated NGINX config using the conf/nginx.conf template
ynh_add_nginx_config
### `ynh_systemd_config` is used to configure a systemd script for an app.
### It can be used for apps that use sysvinit (with adaptation) or systemd.
### Have a look at the app to be sure this app needs a systemd script.
### `ynh_systemd_config` will use the file conf/systemd.service
### If you're not using these lines:
### - You can remove those files in conf/.
### - Remove the section "BACKUP SYSTEMD" in the backup script
### - Remove also the section "STOP AND REMOVE SERVICE" in the remove script
### - As well as the section "RESTORE SYSTEMD" in the restore script
### - And the section "SETUP SYSTEMD" in the upgrade script
# Create a dedicated systemd config
# ynh_add_systemd_config
### `yunohost service add` integrates a service in YunoHost. It then gets
### displayed in the admin interface and through the others `yunohost service` commands.
### (N.B.: this line only makes sense if the app adds a service to the system!)
### If you're not using these lines:
### - You can remove these files in conf/.
### - Remove the section "REMOVE SERVICE INTEGRATION IN YUNOHOST" in the remove script
### - As well as the section "INTEGRATE SERVICE IN YUNOHOST" in the restore script
### - And the section "INTEGRATE SERVICE IN YUNOHOST" in the upgrade script
### Additional options starting with 3.8:
###
### --needs_exposed_ports "$port" a list of ports that needs to be publicly exposed
### which will then be checked by YunoHost's diagnosis system
### (N.B. DO NOT USE THIS if the port is only internal!!!)
###
### --test_status "some command" a custom command to check the status of the service
### (only relevant if 'systemctl status' doesn't do a good job)
###
### --test_conf "some command" some command similar to "nginx -t" that validates the conf of the service
###
### Re-calling 'yunohost service add' during the upgrade script is the right way
### to proceed if you later realize that you need to enable some flags that
### weren't enabled on old installs (be careful it'll override the existing
### service though so you should re-provide all relevant flags when doing so)
# yunohost service add "$app" --description="A short description of the app" --log="/var/log/$app/$app.log"
### `ynh_use_logrotate` is used to configure a logrotate configuration for the logs of this app.
### Use this helper only if there is effectively a log file for this app.
### If you're not using this helper:
### - Remove the section "BACKUP LOGROTATE" in the backup script
### - Remove also the section "REMOVE LOGROTATE CONFIGURATION" in the remove script
### - As well as the section "RESTORE THE LOGROTATE CONFIGURATION" in the restore script
### - And the section "SETUP LOGROTATE" in the upgrade script
# Use logrotate to manage application logfile(s)
ynh_use_logrotate
# Create a dedicated Fail2Ban config
# ynh_add_fail2ban_config --logpath="/var/log/nginx/${domain}-error.log" --failregex="Regex to match into the log for a failed login"
#=================================================
# SETUP APPLICATION WITH CURL
#=================================================
### Use these lines only if the app installation needs to be finalized through
### web forms. We generally don't want to ask the final user,
### so we're going to use curl to automatically fill the fields and submit the
### forms.
# Installation with curl
ynh_script_progression --message="Finalizing installation..." --weight=1
# ynh_local_curl "/INSTALL_PATH" "key1=value1" "key2=value2" "key3=value3"
cp $install_dir/jump-*/jumpapp/* $install_dir -r
rm $install_dir/jump-* -rf
# ls $install_dir
# ls -al /run/php
mkdir -p /var/www/cache/application
#mkdir -p /var/www/cache/"$app"
#chown -R "$app:$app" "$install_dir"
#chown "$app:$app" "/etc/php/8.1/fpm/pool.d/$app.conf"
#chown "$app:$app" "/var/log/php8.1-fpm.log"
#chown "$app:$app" "/run/php/php8.1-fpm-$app.sock"
#chown "$app:$app" "/var/run/php/php8.1-fpm-$app.sock"
chown -R www-data "$install_dir"
#chown -R www-data "/var/www/cache/application"
#chown "$app:$app" "/var/log/nginx/error.log"
#chown "$app:$app" "/var/run/php/php8.1-fpm-jump.sock"
#chown "$app:$app" "/etc/yunohost/certs/domain.tld/crt.pem"
#chown -R "$app:$app" "/etc/nginx"
#chown -R "$app:$www-data" "$install_dir"
#chown -R "$app:$www-data" "/etc/php"
#chown -R "$app:$www-data" "/var/log/php8.1-fpm.log"
#chown -R "$app:$www-data" "/run/php"
#chown -R "$app:$www-data" "/var/run/"
#chmod -R 755 "/etc/nginx/conf.d"
#chmod -R 755 "/var/log/nginx/"
#chmod -R 755 "/etc/php"
#chmod -R 755 "/run/php"
#chmod -R 755 "/var/run/"
#chmod -R 755 "/var/www/jump"
#chmod -R 700 "/etc/yunohost/certs/domain.tld/crt.pem"
#chmod 755 /etc/php/8.1/fpm/pool.d/jump.conf
#chmod 755 /var/log/php8.1-fpm.log
#rm /run/php/php8.1-fpm*
#find $(echo "$PATH" | tr ':' ' ') -type f -executable | grep nginx
#composer update --lock \
#--working-dir=/app
#composer self-update --1
#ynh_spawn_app_shell --app=$app <<< ls -al /var/www/jump
#ynh_install_composer -v 8.1
#ynh_composer_exec -v 8.1 --working-dir=/var/www/jump --commands=--optimize-autoloader --no-dev --no-interaction
# echo $install_dir
composer install --no-dev \
--optimize-autoloader \
--no-interaction \
--no-progress \
--quiet \
--working-dir=$install_dir
#netstat -tulpn
#ls -al /run/php/
#ls -al /etc/php/8.1/fpm/
#ls -al /etc/php/8.1/fpm/pool.d/
#ls -al /var/run/php
#ls -al /run/php
# ls -al /var/log/nginx/
# ls -al /etc/nginx/conf.d/
# ls -al /etc/nginx/conf.d/sub.domain.tld.d/
# php-fpm8.1 -y /etc/php/8.1/fpm/pool.d/$app.conf --test
#groups $app
#groups
# env
# printenv
#set
# nginx -t
# journalctl -u php8.1-fpm.service -b
# cat /etc/systemd/system/$app.service
#ls -al /etc/systemd/system/
#ynh_replace_string --match_string="listen.owner = www-data" --replace_string="listen.owner = $app" --target_file="/etc/php/8.1/fpm/pool.d/$app.conf"
#ynh_replace_string --match_string="listen.group = www-data" --replace_string="listen.group = $app" --target_file="/etc/php/8.1/fpm/pool.d/$app.conf"
#sudo systemctl restart php8.1-fpm
#cat /etc/php/8.1/fpm/pool.d/$app.conf
#ls -al /etc/nginx/conf.d/ 2> /dev/null
# [ -f /etc/nginx/conf.d/sub.maindomain2.tld.d/$app.conf ] && cat /etc/nginx/conf.d/sub.maindomain2.tld.d/$app.conf
# [ -f /etc/nginx/conf.d/sub.domain.tld.d/$app.conf ] && cat /etc/nginx/conf.d/sub.domain.tld.d/$app.conf
# [ -f cat /var/log/$app/$app.log ] && cat /var/log/$app/$app.log
if [ -e "$install_dir/backgrounds" ]; then
#echo >&2 " - Backgrounds directory is mapped... symlinking."
ynh_script_progression --message="- Backgrounds directory is mapped... symlinking." --weight=1
rm /$install_dir/assets/backgrounds -r
ln -s /backgrounds $install_dir/assets/
if [ ! "$(ls -A $install_dir/backgrounds)" ]; then
# echo >&2 " -- Empty so populating with default files."
ynh_script_progression --message=" -- Empty so populating with default files." --weight=1
cp $install_dir/assets/backgrounds/* $install_dir/backgrounds -r
fi
fi
if [ -e "$install_dir/favicon" ]; then
echo >&2 " - Favicon directory is mapped... symlinking."
ynh_script_progression --message=" - Favicon directory is mapped... symlinking." --weight=1
rm /var/www/html/assets/images/favicon -r
ln -s $install_dir/favicon $install_dir/assets/images/
if [ ! "$(ls -A /favicon)" ]; then
echo >&2 " -- Empty so populating with default favicon image."
ynh_script_progression --message=" -- Empty so populating with default favicon image." --weight=1
cp $install_dir/assets/images/favicon/* $install_dir/favicon -r
fi
fi
# if [ -e "/sites" ]; then
# echo >&2 " - Sites directory is mapped... symlinking."
# rm /var/www/html/sites -r
# ln -s /sites /var/www/html/
# if [ ! "$(ls -A /sites)" ]; then
# echo >&2 " -- Empty so populating with default files."
# cp /usr/src/jumpapp/sites/* /sites -r
# fi
# fi
# if [ -e "/search" ]; then
# echo >&2 " - Search directory is mapped... symlinking."
# rm /var/www/html/search -r
# ln -s /search /var/www/html/
# if [ ! "$(ls -A /search)" ]; then
# echo >&2 " -- Empty so populating with default files."
# cp /usr/src/jumpapp/search/* /search -r
# fi
# fi
#ynh_spawn_app_shell --app=$app <<< ls -l /etc/alternatives/php
#=================================================
# START SYSTEMD SERVICE
#=================================================
# ynh_script_progression --message="Starting $app's systemd service..." --weight=1
### `ynh_systemd_action` is used to start a systemd service for an app.
### Only needed if you have configure a systemd service
### If you're not using these lines:
### - Remove the section "STOP SYSTEMD SERVICE" and "START SYSTEMD SERVICE" in the backup script
### - As well as the section "START SYSTEMD SERVICE" in the restore script
### - As well as the section"STOP SYSTEMD SERVICE" and "START SYSTEMD SERVICE" in the upgrade script
### - And the section "STOP SYSTEMD SERVICE" and "START SYSTEMD SERVICE" in the change_url script
# Start a systemd service
#ynh_systemd_action --service_name="$app" --action="start" --log_path="/var/log/$app/$app.log"
#=================================================
# END OF SCRIPT
#=================================================
ynh_script_progression --message="Installation of $app completed" --last
Reference in a new issue View git blame Copy permalink