1
0
Fork 0
mirror of https://github.com/YunoHost-Apps/libretranslate_ynh.git synced 2024-09-03 19:36:00 +02:00

initial v2

This commit is contained in:
Thomas 2023-04-02 00:25:46 +02:00
parent b7cc2ec128
commit 24efc96570
17 changed files with 258 additions and 309 deletions

55
.github/ISSUE_TEMPLATE.md vendored Normal file
View file

@ -0,0 +1,55 @@
---
name: Bug report
about: When creating a bug report, please use the following template to provide all the relevant information and help debugging efficiently.
---
**How to post a meaningful bug report**
1. *Read this whole template first.*
2. *Determine if you are on the right place:*
- *If you were performing an action on the app from the webadmin or the CLI (install, update, backup, restore, change_url...), you are on the right place!*
- *Otherwise, the issue may be due to the app itself. Refer to its documentation or repository for help.*
- *When in doubt, post here and we will figure it out together.*
3. *Delete the italic comments as you write over them below, and remove this guide.*
---
### Describe the bug
*A clear and concise description of what the bug is.*
### Context
- Hardware: *VPS bought online / Old laptop or computer / Raspberry Pi at home / Internet Cube with VPN / Other ARM board / ...*
- YunoHost version: x.x.x
- I have access to my server: *Through SSH | through the webadmin | direct access via keyboard / screen | ...*
- Are you in a special context or did you perform some particular tweaking on your YunoHost instance?: *no / yes*
- If yes, please explain:
- Using, or trying to install package version/branch:
- If upgrading, current package version: *can be found in the admin, or with `yunohost app info $app_id`*
### Steps to reproduce
- *If you performed a command from the CLI, the command itself is enough. For example:*
```sh
sudo yunohost app install the_app
```
- *If you used the webadmin, please perform the equivalent command from the CLI first.*
- *If the error occurs in your browser, explain what you did:*
1. *Go to '...'*
2. *Click on '...'*
3. *Scroll down to '...'*
4. *See error*
### Expected behavior
*A clear and concise description of what you expected to happen. You can remove this section if the command above is enough to understand your intent.*
### Logs
*When an operation fails, YunoHost provides a simple way to share the logs.*
- *In the webadmin, the error message contains a link to the relevant log page. On that page, you will be able to 'Share with Yunopaste'. If you missed it, the logs of previous operations are also available under Tools > Logs.*
- *In command line, the command to share the logs is displayed at the end of the operation and looks like `yunohost log display [log name] --share`. If you missed it, you can find the log ID of a previous operation using `yunohost log list`.*
*After sharing the log, please copypaste directly the link provided by YunoHost (to help readability, no need to copypaste the entire content of the log here, just the link is enough...)*
*If applicable and useful, add screenshots to help explain your problem.*

16
.github/PULL_REQUEST_TEMPLATE.md vendored Normal file
View file

@ -0,0 +1,16 @@
## Problem
- *Description of why you made this PR*
## Solution
- *And how do you fix that problem*
## PR Status
- [ ] Code finished and ready to be reviewed/tested
- [ ] The fix/enhancement were manually tested (if applicable)
## Automatic tests
Automatic tests can be triggered on https://ci-apps-dev.yunohost.org/ *after creating the PR*, by commenting "!testme", "!gogogadgetoci" or "By the power of systemd, I invoke The Great App CI to test this Pull Request!". (N.B. : for this to work you need to be a member of the Yunohost-Apps organization)

View file

@ -1,104 +0,0 @@
#!/bin/bash
#=================================================
# PACKAGE UPDATING HELPER
#=================================================
# This script is meant to be run by GitHub Actions
# The YunoHost-Apps organisation offers a template Action to run this script periodically
# Since each app is different, maintainers can adapt its contents so as to perform
# automatic actions when a new upstream release is detected.
#=================================================
# FETCHING LATEST RELEASE AND ITS ASSETS
#=================================================
# Fetching information
current_version=$(cat manifest.json | jq -j '.version|split("~")[0]')
repo=$(cat manifest.json | jq -j '.upstream.code|split("https://github.com/")[1]')
# Some jq magic is needed, because the latest upstream release is not always the latest version (e.g. security patches for older versions)
version=$(curl --silent "https://api.github.com/repos/$repo/releases" | jq -r '.[] | select( .prerelease != true ) | .tag_name' | sort -V | tail -1)
assets="https://github.com/$repo/archive/refs/tags/$version.tar.gz"
# Later down the script, we assume the version has only digits and dots
# Sometimes the release name starts with a "v", so let's filter it out.
# You may need more tweaks here if the upstream repository has different naming conventions.
if [[ ${version:0:1} == "v" || ${version:0:1} == "V" ]]; then
version=${version:1}
fi
# Setting up the environment variables
echo "Current version: $current_version"
echo "Latest release from upstream: $version"
echo "VERSION=$version" >> $GITHUB_ENV
# For the time being, let's assume the script will fail
echo "PROCEED=false" >> $GITHUB_ENV
# Proceed only if the retrieved version is greater than the current one
if ! dpkg --compare-versions "$current_version" "lt" "$version" ; then
echo "::warning ::No new version available"
exit 0
# Proceed only if a PR for this new version does not already exist
elif git ls-remote -q --exit-code --heads https://github.com/$GITHUB_REPOSITORY.git ci-auto-update-v$version ; then
echo "::warning ::A branch already exists for this update"
exit 0
fi
#=================================================
# UPDATE SOURCE FILES
#=================================================
# Let's download source tarball
asset_url=$assets
echo "Handling asset at $asset_url"
src="app"
# Create the temporary directory
tempdir="$(mktemp -d)"
# Download sources and calculate checksum
filename=${asset_url##*/}
curl --silent -4 -L $asset_url -o "$tempdir/$filename"
checksum=$(sha256sum "$tempdir/$filename" | head -c 64)
# Delete temporary directory
rm -rf $tempdir
# Get extension
if [[ $filename == *.tar.gz ]]; then
extension=tar.gz
else
extension=${filename##*.}
fi
# Rewrite source file
cat <<EOT > conf/$src.src
SOURCE_URL=$asset_url
SOURCE_SUM=$checksum
SOURCE_SUM_PRG=sha256sum
SOURCE_FORMAT=$extension
SOURCE_IN_SUBDIR=true
SOURCE_FILENAME=
EOT
echo "... conf/$src.src updated"
#
#=================================================
# SPECIFIC UPDATE STEPS
#=================================================
# Any action on the app's source code can be done.
# The GitHub Action workflow takes care of committing all changes after this script ends.
#=================================================
# GENERIC FINALIZATION
#=================================================
# Replace new version in manifest
echo "$(jq -s --indent 4 ".[] | .version = \"$version~ynh1\"" manifest.json)" > manifest.json
# No need to update the README, yunohost-bot takes care of it
# The Action will proceed only if the PROCEED environment variable is set to true
echo "PROCEED=true" >> $GITHUB_ENV
exit 0

View file

@ -1,49 +0,0 @@
# This workflow allows GitHub Actions to automagically update your app whenever a new upstream release is detected.
# You need to enable Actions in your repository settings, and fetch this Action from the YunoHost-Apps organization.
# This file should be enough by itself, but feel free to tune it to your needs.
# It calls updater.sh, which is where you should put the app-specific update steps.
name: Check for new upstream releases
on:
# Allow to manually trigger the workflow
workflow_dispatch:
# Run it every day at 6:00 UTC
schedule:
- cron: '0 6 * * *'
jobs:
updater:
runs-on: ubuntu-latest
steps:
- name: Fetch the source code
uses: actions/checkout@v3
with:
token: ${{ secrets.GITHUB_TOKEN }}
- name: Run the updater script
id: run_updater
run: |
# Setting up Git user
git config --global user.name 'yunohost-bot'
git config --global user.email 'yunohost-bot@users.noreply.github.com'
# Run the updater script
/bin/bash .github/workflows/updater.sh
- name: Commit changes
id: commit
if: ${{ env.PROCEED == 'true' }}
run: |
git commit -am "Upgrade to v$VERSION"
- name: Create Pull Request
id: cpr
if: ${{ env.PROCEED == 'true' }}
uses: peter-evans/create-pull-request@v4
with:
token: ${{ secrets.GITHUB_TOKEN }}
commit-message: Update to version ${{ env.VERSION }}
committer: 'yunohost-bot <yunohost-bot@users.noreply.github.com>'
author: 'yunohost-bot <yunohost-bot@users.noreply.github.com>'
signoff: false
base: testing
branch: ci-auto-update-v${{ env.VERSION }}
delete-branch: true
title: 'Upgrade to version ${{ env.VERSION }}'
body: |
Upgrade to v${{ env.VERSION }}
draft: false

View file

@ -1,23 +0,0 @@
;; Test complet
; Manifest
domain="domain.tld"
path="/path"
is_public=1
; Checks
pkg_linter=1
setup_sub_dir=0
setup_root=1
setup_nourl=0
setup_private=1
setup_public=1
upgrade=1
#upgrade=1 from_commit=CommitHash
backup_restore=1
multi_instance=0
change_url=1
;;; Options
Email=
Notification=none
;;; Upgrade options
; commit=CommitHash
name=Name and date of the commit.

View file

@ -1,6 +0,0 @@
SOURCE_URL=https://github.com/LibreTranslate/LibreTranslate/archive/refs/tags/v1.3.0.tar.gz
SOURCE_SUM=6f73d4d7d2e3b5a9bb0bb06877708d5b9101e7928fa15d82744ce0eca6af9773
SOURCE_SUM_PRG=sha256sum
SOURCE_FORMAT=tar.gz
SOURCE_IN_SUBDIR=true
SOURCE_FILENAME=

View file

@ -8,8 +8,8 @@ User=__APP__
Group=__APP__
Restart=always
Type=simple
WorkingDirectory=__FINALPATH__
ExecStart=/usr/local/bin/pipenv run python3 __FINALPATH__/.venv/bin/libretranslate --host 127.0.0.1 --port __PORT__ --load-only en,fr --frontend-language-target en
WorkingDirectory=__INSTALL_DIR__
ExecStart=/usr/local/bin/pipenv run python3 __INSTALL_DIR__/.venv/bin/libretranslate --host 127.0.0.1 --port __PORT__ --load-only en,fr --frontend-language-target en
[Install]
WantedBy=multi-user.target

View file

@ -1 +0,0 @@
Free and Open Source Machine Translation API, entirely self-hosted. Unlike other APIs, it doesn't rely on proprietary providers such as Google or Azure to perform translations. Instead, its translation engine is powered by the open source Argos Translate library.

59
manifest.toml Normal file
View file

@ -0,0 +1,59 @@
packaging_format = 2
id = "libretranslate"
name = "LibreTranslate"
description.en = "Open Source Machine Translation API, entirely self-hosted"
description.fr = "API de traduction automatique Open Source, entièrement auto-hébergée"
version = "1.3.0~ynh1"
maintainers = ["John doe"]
[upstream]
license = "AGPL-3.0"
website = "https://libretranslate.com/"
demo = "https://libretranslate.com/"
admindoc = "https://libretranslate.com/docs/"
code = "https://github.com/LibreTranslate/LibreTranslate"
cpe = "???" # FIXME: optional but recommended if relevant, this is meant to contain the Common Platform Enumeration, which is sort of a standard id for applications defined by the NIST. In particular, Yunohost may use this is in the future to easily track CVE (=security reports) related to apps. The CPE may be obtained by searching here: https://nvd.nist.gov/products/cpe/search. For example, for Nextcloud, the CPE is 'cpe:2.3:a:nextcloud:nextcloud' (no need to include the version number)
fund = "???" # FIXME: optional but recommended (or remove if irrelevant / not applicable). This is meant to be an URL where people can financially support this app, especially when its development is based on volunteers and/or financed by its community. YunoHost may later advertise it in the webadmin.
[integration]
yunohost = ">= 11.0.9"
architectures = "all" # FIXME: can be replaced by a list of supported archs using the dpkg --print-architecture nomenclature (amd64/i386/armhf/arm64), for example: ["amd64", "i386"]
multi_instance = false
ldap = "?" # FIXME: replace with true, false, or "not_relevant". Not to confuse with the "sso" key : the "ldap" key corresponds to wether or not a user *can* login on the app using its YunoHost credentials.
sso = "?" # FIXME: replace with true, false, or "not_relevant". Not to confuse with the "ldap" key : the "sso" key corresponds to wether or not a user is *automatically logged-in* on the app when logged-in on the YunoHost portal.
disk = "50M" # FIXME: replace with an **estimate** minimum disk requirement. e.g. 20M, 400M, 1G, ...
ram.build = "50M" # FIXME: replace with an **estimate** minimum ram requirement. e.g. 50M, 400M, 1G, ...
ram.runtime = "50M" # FIXME: replace with an **estimate** minimum ram requirement. e.g. 50M, 400M, 1G, ...
[install]
[install.domain]
# this is a generic question - ask strings are automatically handled by Yunohost's core
type = "domain"
full_domain = true
[install.init_main_permission]
type = "group"
default = "visitors"
[resources]
[resources.sources]
[resources.sources.main]
url = "https://github.com/LibreTranslate/LibreTranslate/archive/refs/tags/v1.3.0.tar.gz"
sha256 = "6f73d4d7d2e3b5a9bb0bb06877708d5b9101e7928fa15d82744ce0eca6af9773"
[resources.system_user]
[resources.install_dir]
[resources.permissions]
main.url = "/"
[resources.ports]
main.default = 5000
[resources.apt]
packages = "libicu-dev, python3-venv, python3-icu, pkg-config, python3, python3-pip, python3-dev, build-essential, libssl-dev, libffi-dev, python3-setuptools"

View file

@ -5,7 +5,7 @@
#=================================================
# dependencies used by the app
pkg_dependencies="libicu-dev python3-venv python3-icu pkg-config python3 python3-pip python3-dev build-essential libssl-dev libffi-dev python3-setuptools"
#REMOVEME? pkg_dependencies="libicu-dev python3-venv python3-icu pkg-config python3 python3-pip python3-dev build-essential libssl-dev libffi-dev python3-setuptools"
libretranslate_version="1.3.0"

View file

@ -14,22 +14,22 @@ source /usr/share/yunohost/helpers
# MANAGE SCRIPT FAILURE
#=================================================
ynh_clean_setup () {
#REMOVEME? ynh_clean_setup () {
### Remove this function if there's nothing to clean before calling the remove script.
true
}
# Exit if an error occurs during the execution of the script
ynh_abort_if_errors
#REMOVEME? ynh_abort_if_errors
#=================================================
# LOAD SETTINGS
#=================================================
ynh_print_info --message="Loading installation settings..."
#REMOVEME? ynh_print_info --message="Loading installation settings..."
app=$YNH_APP_INSTANCE_NAME
#REMOVEME? app=$YNH_APP_INSTANCE_NAME
final_path=$(ynh_app_setting_get --app=$app --key=final_path)
domain=$(ynh_app_setting_get --app=$app --key=domain)
#REMOVEME? #REMOVEME? install_dir=$(ynh_app_setting_get --app=$app --key=install_dir)
#REMOVEME? domain=$(ynh_app_setting_get --app=$app --key=domain)
#=================================================
# DECLARE DATA AND CONF FILES TO BACKUP
@ -40,7 +40,7 @@ ynh_print_info --message="Declaring files to be backed up..."
# BACKUP THE APP MAIN DIR
#=================================================
ynh_backup --src_path="$final_path"
ynh_backup --src_path="$install_dir"
#=================================================
# BACKUP THE NGINX CONFIGURATION

View file

@ -13,54 +13,54 @@ source /usr/share/yunohost/helpers
# RETRIEVE ARGUMENTS
#=================================================
old_domain=$YNH_APP_OLD_DOMAIN
old_path=$YNH_APP_OLD_PATH
#REMOVEME? old_domain=$YNH_APP_OLD_DOMAIN
#REMOVEME? old_path=$YNH_APP_OLD_PATH
new_domain=$YNH_APP_NEW_DOMAIN
new_path=$YNH_APP_NEW_PATH
#REMOVEME? new_domain=$YNH_APP_NEW_DOMAIN
#REMOVEME? new_path=$YNH_APP_NEW_PATH
app=$YNH_APP_INSTANCE_NAME
#REMOVEME? app=$YNH_APP_INSTANCE_NAME
#=================================================
# LOAD SETTINGS
#=================================================
ynh_script_progression --message="Loading installation settings..." --weight=1
#REMOVEME? ynh_script_progression --message="Loading installation settings..." --weight=1
# Needed for helper "ynh_add_nginx_config"
final_path=$(ynh_app_setting_get --app=$app --key=final_path)
port=$(ynh_app_setting_get --app=$app --key=port)
#REMOVEME? # Needed for helper "ynh_add_nginx_config"
#REMOVEME? #REMOVEME? install_dir=$(ynh_app_setting_get --app=$app --key=install_dir)
#REMOVEME? port=$(ynh_app_setting_get --app=$app --key=port)
#=================================================
# BACKUP BEFORE CHANGE URL THEN ACTIVE TRAP
#=================================================
ynh_script_progression --message="Backing up the app before changing its URL (may take a while)..." --weight=1
#REMOVEME? ynh_script_progression --message="Backing up the app before changing its URL (may take a while)..." --weight=1
# Backup the current version of the app
ynh_backup_before_upgrade
ynh_clean_setup () {
#REMOVEME? ynh_backup_before_upgrade
#REMOVEME? ynh_clean_setup () {
# Remove the new domain config file, the remove script won't do it as it doesn't know yet its location.
ynh_secure_remove --file="/etc/nginx/conf.d/$new_domain.d/$app.conf"
#REMOVEME? ynh_secure_remove --file="/etc/nginx/conf.d/$new_domain.d/$app.conf"
# Restore it if the upgrade fails
ynh_restore_upgradebackup
#REMOVEME? ynh_restore_upgradebackup
}
# Exit if an error occurs during the execution of the script
ynh_abort_if_errors
#REMOVEME? ynh_abort_if_errors
#=================================================
# CHECK WHICH PARTS SHOULD BE CHANGED
#=================================================
change_domain=0
if [ "$old_domain" != "$new_domain" ]
#REMOVEME? change_domain=0
#REMOVEME? if [ "$old_domain" != "$new_domain" ]
then
change_domain=1
#REMOVEME? change_domain=1
fi
change_path=0
if [ "$old_path" != "$new_path" ]
#REMOVEME? change_path=0
#REMOVEME? if [ "$old_path" != "$new_path" ]
then
change_path=1
#REMOVEME? change_path=1
fi
#=================================================
@ -77,28 +77,30 @@ ynh_systemd_action --service_name=$app --action="stop" --log_path="/var/log/$app
#=================================================
ynh_script_progression --message="Updating NGINX web server configuration..." --time --weight=1
nginx_conf_path=/etc/nginx/conf.d/$old_domain.d/$app.conf
ynh_change_url_nginx_config
#REMOVEME? nginx_conf_path=/etc/nginx/conf.d/$old_domain.d/$app.conf
# Change the path in the NGINX config file
if [ $change_path -eq 1 ]
then
# Make a backup of the original NGINX config file if modified
ynh_backup_if_checksum_is_different --file="$nginx_conf_path"
#REMOVEME? ynh_backup_if_checksum_is_different --file="$nginx_conf_path"
# Set global variables for NGINX helper
domain="$old_domain"
path_url="$new_path"
#REMOVEME? domain="$old_domain"
#REMOVEME? path="$new_path"
# Create a dedicated NGINX config
ynh_add_nginx_config
#REMOVEME? ynh_add_nginx_config
fi
# Change the domain for NGINX
if [ $change_domain -eq 1 ]
then
# Delete file checksum for the old conf file location
ynh_delete_file_checksum --file="$nginx_conf_path"
mv $nginx_conf_path /etc/nginx/conf.d/$new_domain.d/$app.conf
#REMOVEME? ynh_delete_file_checksum --file="$nginx_conf_path"
#REMOVEME? mv $nginx_conf_path /etc/nginx/conf.d/$new_domain.d/$app.conf
# Store file checksum for the new config file location
ynh_store_file_checksum --file="/etc/nginx/conf.d/$new_domain.d/$app.conf"
#REMOVEME? ynh_store_file_checksum --file="/etc/nginx/conf.d/$new_domain.d/$app.conf"
fi
#=================================================
@ -113,9 +115,9 @@ ynh_systemd_action --service_name=$app --action="start" --log_path="/var/log/$ap
#=================================================
# RELOAD NGINX
#=================================================
ynh_script_progression --message="Reloading NGINX web server..." --time --weight=1
#REMOVEME? ynh_script_progression --message="Reloading NGINX web server..." --time --weight=1
ynh_systemd_action --service_name=nginx --action=reload
#REMOVEME? #REMOVEME? ynh_systemd_action --service_name=nginx --action=reload
#=================================================
# END OF SCRIPT

View file

@ -13,80 +13,80 @@ source /usr/share/yunohost/helpers
# MANAGE SCRIPT FAILURE
#=================================================
ynh_clean_setup () {
#REMOVEME? ynh_clean_setup () {
### Remove this function if there's nothing to clean before calling the remove script.
true
}
# Exit if an error occurs during the execution of the script
ynh_abort_if_errors
#REMOVEME? ynh_abort_if_errors
#=================================================
# RETRIEVE ARGUMENTS FROM THE MANIFEST
#=================================================
domain=$YNH_APP_ARG_DOMAIN
path_url="/"
is_public=$YNH_APP_ARG_IS_PUBLIC
#REMOVEME? domain=$YNH_APP_ARG_DOMAIN
path="/"
#REMOVEME? is_public=$YNH_APP_ARG_IS_PUBLIC
app=$YNH_APP_INSTANCE_NAME
#REMOVEME? app=$YNH_APP_INSTANCE_NAME
#=================================================
# CHECK IF THE APP CAN BE INSTALLED WITH THESE ARGS
#=================================================
ynh_script_progression --message="Validating installation parameters..." --weight=1
#REMOVEME? ynh_script_progression --message="Validating installation parameters..." --weight=1
final_path=/var/www/$app
test ! -e "$final_path" || ynh_die --message="This path already contains a folder"
#REMOVEME? install_dir=/var/www/$app
#REMOVEME? test ! -e "$install_dir" || ynh_die --message="This path already contains a folder"
# Register (book) web path
ynh_webpath_register --app=$app --domain=$domain --path_url=$path_url
#REMOVEME? ynh_webpath_register --app=$app --domain=$domain --path=$path
#=================================================
# STORE SETTINGS FROM MANIFEST
#=================================================
ynh_script_progression --message="Storing installation settings..." --weight=1
#REMOVEME? ynh_script_progression --message="Storing installation settings..." --weight=1
ynh_app_setting_set --app=$app --key=domain --value=$domain
ynh_app_setting_set --app=$app --key=path --value=$path_url
#REMOVEME? ynh_app_setting_set --app=$app --key=domain --value=$domain
#REMOVEME? ynh_app_setting_set --app=$app --key=path --value=$path
#=================================================
# STANDARD MODIFICATIONS
#=================================================
# FIND AND OPEN A PORT
#=================================================
ynh_script_progression --message="Finding an available port..." --weight=1
#REMOVEME? ynh_script_progression --message="Finding an available port..." --weight=1
# Find an available port
port=$(ynh_find_port --port=5000)
ynh_app_setting_set --app=$app --key=port --value=$port
#REMOVEME? port=$(ynh_find_port --port=5000)
#REMOVEME? ynh_app_setting_set --app=$app --key=port --value=$port
#=================================================
# INSTALL DEPENDENCIES
#=================================================
ynh_script_progression --message="Installing dependencies..." --weight=20
#REMOVEME? ynh_script_progression --message="Installing dependencies..." --weight=20
ynh_install_app_dependencies $pkg_dependencies
#REMOVEME? ynh_install_app_dependencies $pkg_dependencies
#=================================================
# CREATE DEDICATED USER
#=================================================
ynh_script_progression --message="Configuring system user..." --weight=1
#REMOVEME? ynh_script_progression --message="Configuring system user..." --weight=1
# Create a system user
ynh_system_user_create --username=$app --home_dir="$final_path"
#REMOVEME? ynh_system_user_create --username=$app --home_dir="$install_dir"
#=================================================
# DOWNLOAD, CHECK AND UNPACK SOURCE
#=================================================
ynh_script_progression --message="Setting up source files..." --weight=1
ynh_app_setting_set --app=$app --key=final_path --value=$final_path
#REMOVEME? ynh_app_setting_set --app=$app --key=install_dir --value=$install_dir
# Download, check integrity, uncompress and patch the source from app.src
ynh_setup_source --dest_dir="$final_path"
ynh_setup_source --dest_dir="$install_dir"
chmod 750 "$final_path"
chmod -R o-rwx "$final_path"
chown -R $app:www-data "$final_path"
chmod 750 "$install_dir"
chmod -R o-rwx "$install_dir"
chown -R $app:www-data "$install_dir"
#=================================================
# NGINX CONFIGURATION
@ -103,7 +103,7 @@ ynh_script_progression --message="Installing LibreTranslate..." --weight=1
sudo -u $app python3 -m pip install pipenv
pushd $final_path
pushd $install_dir
sudo -u $app PIPENV_VENV_IN_PROJECT="enabled" PIPENV_SKIP_LOCK=true python3 -m pipenv install libretranslate==$libretranslate_version 2>&1
popd
@ -143,22 +143,22 @@ ynh_systemd_action --service_name=$app --action="start" --log_path="/var/log/$ap
#=================================================
# SETUP SSOWAT
#=================================================
ynh_script_progression --message="Configuring permissions..." --weight=1
#REMOVEME? ynh_script_progression --message="Configuring permissions..." --weight=1
# Make app public if necessary
if [ $is_public -eq 1 ]
#REMOVEME? if [ $is_public -eq 1 ]
then
ynh_permission_update --permission="main" --add="visitors"
#REMOVEME? ynh_permission_update --permission="main" --add="visitors"
fi
ynh_permission_create --permission="api" --url="/api" --allowed="visitors" --auth_header="false" --show_tile="false" --protected="true"
#REMOVEME? ynh_permission_create --permission="api" --url="/api" --allowed="visitors" --auth_header="false" --show_tile="false" --protected="true"
#=================================================
# RELOAD NGINX
#=================================================
ynh_script_progression --message="Reloading NGINX web server..." --weight=1
#REMOVEME? ynh_script_progression --message="Reloading NGINX web server..." --weight=1
ynh_systemd_action --service_name=nginx --action=reload
#REMOVEME? ynh_systemd_action --service_name=nginx --action=reload
#=================================================
# END OF SCRIPT

View file

@ -12,13 +12,13 @@ source /usr/share/yunohost/helpers
#=================================================
# LOAD SETTINGS
#=================================================
ynh_script_progression --message="Loading installation settings..." --weight=1
#REMOVEME? ynh_script_progression --message="Loading installation settings..." --weight=1
app=$YNH_APP_INSTANCE_NAME
#REMOVEME? app=$YNH_APP_INSTANCE_NAME
domain=$(ynh_app_setting_get --app=$app --key=domain)
port=$(ynh_app_setting_get --app=$app --key=port)
final_path=$(ynh_app_setting_get --app=$app --key=final_path)
#REMOVEME? domain=$(ynh_app_setting_get --app=$app --key=domain)
#REMOVEME? port=$(ynh_app_setting_get --app=$app --key=port)
#REMOVEME? #REMOVEME? install_dir=$(ynh_app_setting_get --app=$app --key=install_dir)
#=================================================
# STANDARD REMOVE
@ -44,18 +44,18 @@ ynh_remove_systemd_config
#=================================================
# REMOVE DEPENDENCIES
#=================================================
ynh_script_progression --message="Removing dependencies..." --weight=4
#REMOVEME? ynh_script_progression --message="Removing dependencies..." --weight=4
# Remove metapackage and its dependencies
ynh_remove_app_dependencies
#REMOVEME? ynh_remove_app_dependencies
#=================================================
# REMOVE APP MAIN DIR
#=================================================
ynh_script_progression --message="Removing app main directory..." --weight=3
#REMOVEME? ynh_script_progression --message="Removing app main directory..." --weight=3
# Remove the app directory securely
ynh_secure_remove --file="$final_path"
#REMOVEME? ynh_secure_remove --file="$install_dir"
#=================================================
# REMOVE NGINX CONFIGURATION
@ -78,10 +78,10 @@ ynh_remove_logrotate
#=================================================
# REMOVE DEDICATED USER
#=================================================
ynh_script_progression --message="Removing the dedicated system user..." --weight=1
#REMOVEME? ynh_script_progression --message="Removing the dedicated system user..." --weight=1
# Delete a system user
ynh_system_user_delete --username=$app
#REMOVEME? ynh_system_user_delete --username=$app
#=================================================
# END OF SCRIPT

View file

@ -14,30 +14,30 @@ source /usr/share/yunohost/helpers
# MANAGE SCRIPT FAILURE
#=================================================
ynh_clean_setup () {
#REMOVEME? ynh_clean_setup () {
#### Remove this function if there's nothing to clean before calling the remove script.
true
}
# Exit if an error occurs during the execution of the script
ynh_abort_if_errors
#REMOVEME? ynh_abort_if_errors
#=================================================
# LOAD SETTINGS
#=================================================
ynh_script_progression --message="Loading installation settings..." --weight=1
#REMOVEME? ynh_script_progression --message="Loading installation settings..." --weight=1
app=$YNH_APP_INSTANCE_NAME
#REMOVEME? app=$YNH_APP_INSTANCE_NAME
domain=$(ynh_app_setting_get --app=$app --key=domain)
path_url=$(ynh_app_setting_get --app=$app --key=path)
final_path=$(ynh_app_setting_get --app=$app --key=final_path)
#REMOVEME? domain=$(ynh_app_setting_get --app=$app --key=domain)
#REMOVEME? path=$(ynh_app_setting_get --app=$app --key=path)
#REMOVEME? #REMOVEME? install_dir=$(ynh_app_setting_get --app=$app --key=install_dir)
#=================================================
# CHECK IF THE APP CAN BE RESTORED
#=================================================
ynh_script_progression --message="Validating restoration parameters..." --weight=1
#REMOVEME? ynh_script_progression --message="Validating restoration parameters..." --weight=1
test ! -d $final_path || ynh_die --message="There is already a directory: $final_path "
#REMOVEME? test ! -d $install_dir || ynh_die --message="There is already a directory: $install_dir "
#=================================================
# STANDARD RESTORATION STEPS
@ -51,31 +51,31 @@ ynh_restore_file --origin_path="/etc/nginx/conf.d/$domain.d/$app.conf"
#=================================================
# RECREATE THE DEDICATED USER
#=================================================
ynh_script_progression --message="Recreating the dedicated system user..." --weight=1
#REMOVEME? ynh_script_progression --message="Recreating the dedicated system user..." --weight=1
# Create the dedicated user (if not existing)
ynh_system_user_create --username=$app --home_dir="$final_path"
#REMOVEME? ynh_system_user_create --username=$app --home_dir="$install_dir"
#=================================================
# RESTORE THE APP MAIN DIR
#=================================================
ynh_script_progression --message="Restoring the app main directory..." --weight=1
ynh_restore_file --origin_path="$final_path"
ynh_restore_file --origin_path="$install_dir"
chmod 750 "$final_path"
chmod -R o-rwx "$final_path"
chown -R $app:www-data "$final_path"
chmod 750 "$install_dir"
chmod -R o-rwx "$install_dir"
chown -R $app:www-data "$install_dir"
#=================================================
# SPECIFIC RESTORATION
#=================================================
# REINSTALL DEPENDENCIES
#=================================================
ynh_script_progression --message="Reinstalling dependencies..." --weight=1
#REMOVEME? ynh_script_progression --message="Reinstalling dependencies..." --weight=1
# Define and install dependencies
ynh_install_app_dependencies $pkg_dependencies
#REMOVEME? ynh_install_app_dependencies $pkg_dependencies
#=================================================
# RESTORE SYSTEMD

View file

@ -12,14 +12,14 @@ source /usr/share/yunohost/helpers
#=================================================
# LOAD SETTINGS
#=================================================
ynh_script_progression --message="Loading installation settings..." --weight=1
#REMOVEME? ynh_script_progression --message="Loading installation settings..." --weight=1
app=$YNH_APP_INSTANCE_NAME
#REMOVEME? app=$YNH_APP_INSTANCE_NAME
domain=$(ynh_app_setting_get --app=$app --key=domain)
path_url=$(ynh_app_setting_get --app=$app --key=path)
final_path=$(ynh_app_setting_get --app=$app --key=final_path)
port=$(ynh_app_setting_get --app=$app --key=port)
#REMOVEME? domain=$(ynh_app_setting_get --app=$app --key=domain)
#REMOVEME? path=$(ynh_app_setting_get --app=$app --key=path)
#REMOVEME? #REMOVEME? install_dir=$(ynh_app_setting_get --app=$app --key=install_dir)
#REMOVEME? port=$(ynh_app_setting_get --app=$app --key=port)
#=================================================
# CHECK VERSION
@ -30,16 +30,16 @@ upgrade_type=$(ynh_check_app_version_changed)
#=================================================
# BACKUP BEFORE UPGRADE THEN ACTIVE TRAP
#=================================================
ynh_script_progression --message="Backing up the app before upgrading (may take a while)..." --weight=1
#REMOVEME? ynh_script_progression --message="Backing up the app before upgrading (may take a while)..." --weight=1
# Backup the current version of the app
ynh_backup_before_upgrade
ynh_clean_setup () {
#REMOVEME? ynh_backup_before_upgrade
#REMOVEME? ynh_clean_setup () {
# Restore it if the upgrade fails
ynh_restore_upgradebackup
#REMOVEME? ynh_restore_upgradebackup
}
# Exit if an error occurs during the execution of the script
ynh_abort_if_errors
#REMOVEME? ynh_abort_if_errors
#=================================================
# STANDARD UPGRADE STEPS
@ -59,24 +59,24 @@ ynh_script_progression --message="Ensuring downward compatibility..." --weight=1
### then you may safely remove these lines
# Cleaning legacy permissions
if ynh_legacy_permissions_exists; then
ynh_legacy_permissions_delete_all
#REMOVEME? if ynh_legacy_permissions_exists; then
#REMOVEME? ynh_legacy_permissions_delete_all
ynh_app_setting_delete --app=$app --key=is_public
fi
# Create a permission if needed
if ! ynh_permission_exists --permission="api"; then
ynh_permission_create --permission="api" --url="/api" --allowed="visitors" --show_tile="false" --protected="true"
#REMOVEME? if ! ynh_permission_exists --permission="api"; then
#REMOVEME? ynh_permission_create --permission="api" --url="/api" --allowed="visitors" --show_tile="false" --protected="true"
fi
#=================================================
# CREATE DEDICATED USER
#=================================================
ynh_script_progression --message="Making sure dedicated system user exists..." --weight=1
#REMOVEME? ynh_script_progression --message="Making sure dedicated system user exists..." --weight=1
# Create a dedicated user (if not existing)
ynh_system_user_create --username=$app --home_dir="$final_path"
#REMOVEME? ynh_system_user_create --username=$app --home_dir="$install_dir"
#=================================================
# DOWNLOAD, CHECK AND UNPACK SOURCE
@ -87,12 +87,12 @@ then
ynh_script_progression --message="Upgrading source files..." --weight=1
# Download, check integrity, uncompress and patch the source from app.src
ynh_setup_source --dest_dir="$final_path"
ynh_setup_source --dest_dir="$install_dir"
fi
chmod 750 "$final_path"
chmod -R o-rwx "$final_path"
chown -R $app:www-data "$final_path"
chmod 750 "$install_dir"
chmod -R o-rwx "$install_dir"
chown -R $app:www-data "$install_dir"
#=================================================
# NGINX CONFIGURATION
@ -105,9 +105,9 @@ ynh_add_nginx_config
#=================================================
# UPGRADE DEPENDENCIES
#=================================================
ynh_script_progression --message="Upgrading dependencies..." --weight=1
#REMOVEME? ynh_script_progression --message="Upgrading dependencies..." --weight=1
ynh_install_app_dependencies $pkg_dependencies
#REMOVEME? ynh_install_app_dependencies $pkg_dependencies
#=================================================
# SETUP SYSTEMD
@ -144,9 +144,9 @@ ynh_systemd_action --service_name=$app --action="start" --log_path="/var/log/$ap
#=================================================
# RELOAD NGINX
#=================================================
ynh_script_progression --message="Reloading NGINX web server..." --weight=1
#REMOVEME? ynh_script_progression --message="Reloading NGINX web server..." --weight=1
ynh_systemd_action --service_name=nginx --action=reload
#REMOVEME? ynh_systemd_action --service_name=nginx --action=reload
#=================================================
# END OF SCRIPT