Merge branch 'testing'

.github/ISSUE_TEMPLATE.md

@@ -8,7 +8,7 @@ about: When creating a bug report, please use the following template to provide
 1. *Read this whole template first.*
 2. *Determine if you are on the right place:*
    - *If you were performing an action on the app from the webadmin or the CLI (install, update, backup, restore, change_url...), you are on the right place!*
-   - *Otherwise, the issue may be due to mosquitto itself. Refer to its documentation or repository for help.*
+   - *Otherwise, the issue may be due to the app itself. Refer to its documentation or repository for help.*
    - *When in doubt, post here and we will figure it out together.*
 3. *Delete the italic comments as you write over them below, and remove this guide.*
 --- 
@@ -31,7 +31,7 @@ about: When creating a bug report, please use the following template to provide
 
 - *If you performed a command from the CLI, the command itself is enough. For example:*
     ```sh
-    sudo yunohost app install mosquitto
+    sudo yunohost app install the_app
     ```
 - *If you used the webadmin, please perform the equivalent command from the CLI first.*
 - *If the error occurs in your browser, explain what you did:*

.github/PULL_REQUEST_TEMPLATE.md

@@ -0,0 +1,16 @@
+## Problem
+
+- *Description of why you made this PR*
+
+## Solution
+
+- *And how do you fix that problem*
+
+## PR Status
+
+- [ ] Code finished and ready to be reviewed/tested
+- [ ] The fix/enhancement were manually tested (if applicable)
+
+## Automatic tests
+
+Automatic tests can be triggered on https://ci-apps-dev.yunohost.org/ *after creating the PR*, by commenting "!testme", "!gogogadgetoci" or "By the power of systemd, I invoke The Great App CI to test this Pull Request!". (N.B. : for this to work you need to be a member of the Yunohost-Apps organization)

README.md

@@ -1,9 +1,11 @@
-# Mosquitto (MQTT Broker) for YunoHost
+<!--
+N.B.: This README was automatically generated by https://github.com/YunoHost/apps/tree/master/tools/README-generator
+It shall NOT be edited by hand.
+-->
 
-[![Integration level](https://dash.yunohost.org/integration/mosquitto.svg)](https://dash.yunohost.org/appci/app/mosquitto)
+# Mosquitto for YunoHost
-![](https://ci-apps.yunohost.org/ci/badges/mosquitto.status.svg)
-![](https://ci-apps.yunohost.org/ci/badges/mosquitto.maintain.svg)
 
+[![Integration level](https://dash.yunohost.org/integration/mosquitto.svg)](https://dash.yunohost.org/appci/app/mosquitto) ![Working status](https://ci-apps.yunohost.org/ci/badges/mosquitto.status.svg) ![Maintenance status](https://ci-apps.yunohost.org/ci/badges/mosquitto.maintain.svg)  
 [![Install Mosquitto with YunoHost](https://install-app.yunohost.org/install-with-yunohost.svg)](https://install-app.yunohost.org/?app=mosquitto)
 
 *[Lire ce readme en français.](./README_fr.md)*
@@ -15,50 +17,35 @@ If you don't have YunoHost, please consult [the guide](https://yunohost.org/#/in
 
 [Mosquitto](https://mosquitto.org/) gives you interconnect your objects and applications with an open source MQTT broker. Client can publish or subscribe after authentication (username, password).
 
-**Shipped version:** 2.0.8
 
-## Configuration
+**Shipped version:** 2.0.12~ynh1
 
-How to configure this app: From an admin panel or a plain file with SSH.
+**Demo:** https://test.mosquitto.org
+## Disclaimers / important information
 
-## Documentation
+## TODO
 
- * Official documentation: https://mosquitto.org/documentation/
+- [ ] Add MQTTS (MQTT with TLS)
 
-## YunoHost specific features
+## Documentation and resources
 
-#### Multi-user support
+* Official app website: <https://mosquitto.org>
-
+* Official user documentation: <https://yunohost.org/apps>
- * Are LDAP and HTTP auth supported? **No**
+* Official admin documentation: <https://mosquitto.org/documentation/>
- * Can the app be used by multiple users? **No**
+* Upstream app code repository: <https://github.com/eclipse/mosquitto>
-
+* YunoHost documentation for this app: <https://yunohost.org/app_mosquitto>
-#### Supported architectures
+* Report a bug: <https://github.com/YunoHost-Apps/mosquitto_ynh/issues>
-
- * x86-64 - [![Build Status](https://ci-apps.yunohost.org/ci/logs/mosquitto.svg)](https://ci-apps.yunohost.org/ci/apps/mosquitto/)
- * ARMv8-A - [![Build Status](https://ci-apps-arm.yunohost.org/ci/logs/mosquitto.svg)](https://ci-apps-arm.yunohost.org/ci/apps/mosquitto/)
-
-## Links
-
- * Report a bug: https://github.com/YunoHost-Apps/mosquitto_ynh/issues
- * App website: https://mosquitto.org/
- * Upstream app repository: https://github.com/eclipse/mosquitto
- * YunoHost website: https://yunohost.org/
-
----
 
 ## Developer info
 
 Please send your pull request to the [testing branch](https://github.com/YunoHost-Apps/mosquitto_ynh/tree/testing).
 
 To try the testing branch, please proceed like that.
-```
+
+``` bash
 sudo yunohost app install https://github.com/YunoHost-Apps/mosquitto_ynh/tree/testing --debug
 or
 sudo yunohost app upgrade mosquitto -u https://github.com/YunoHost-Apps/mosquitto_ynh/tree/testing --debug
 ```
 
----
+**More info regarding app packaging:** <https://yunohost.org/packaging_apps>
-
-## Todo
-
-- [ ] Add MQTTS (MQTT with TLS)

README_fr.md

@@ -1,64 +1,51 @@
-# Mosquitto (broker MQTT) pour YunoHost
+<!--
+N.B.: This README was automatically generated by https://github.com/YunoHost/apps/tree/master/tools/README-generator
+It shall NOT be edited by hand.
+-->
 
-[![Niveau d'intégration](https://dash.yunohost.org/integration/mosquitto.svg)](https://dash.yunohost.org/appci/app/mosquitto)
+# Mosquitto pour YunoHost
-![](https://ci-apps.yunohost.org/ci/badges/mosquitto.status.svg)
-![](https://ci-apps.yunohost.org/ci/badges/mosquitto.maintain.svg)
 
+[![Niveau d'intégration](https://dash.yunohost.org/integration/mosquitto.svg)](https://dash.yunohost.org/appci/app/mosquitto) ![Statut du fonctionnement](https://ci-apps.yunohost.org/ci/badges/mosquitto.status.svg) ![Statut de maintenance](https://ci-apps.yunohost.org/ci/badges/mosquitto.maintain.svg)  
 [![Installer Mosquitto avec YunoHost](https://install-app.yunohost.org/install-with-yunohost.svg)](https://install-app.yunohost.org/?app=mosquitto)
 
 *[Read this readme in english.](./README.md)*
 
 > *Ce package vous permet d'installer Mosquitto rapidement et simplement sur un serveur YunoHost.
-Si vous n'avez pas YunoHost, consultez [le guide](https://yunohost.org/#/install) pour apprendre comment l'installer.*
+Si vous n'avez pas YunoHost, regardez [ici](https://yunohost.org/#/install) pour savoir comment l'installer et en profiter.*
 
 ## Vue d'ensemble
 
 [Mosquitto](https://mosquitto.org/) vous permet d'interconnecter vos objets et applications avec un broker MQTT open source. Le client peut publier ou s'abonner après authentification (nom d'utilisateur, mot de passe).
 
-**Version incluse :** 2.0.8
 
-## Configuration
+**Version incluse :** 2.0.12~ynh1
 
-Comment configurer cette application : via le panneau d'administration ou un fichier brut en SSH.
+**Démo :** https://test.mosquitto.org
+## Avertissements / informations importantes
 
-## Documentation
+## A faire
 
- * Documentation officielle : https://mosquitto.org/documentation/
+- [ ] Ajouter MQTTS (MQTT avec TLS)
 
-## Caractéristiques spécifiques YunoHost
+## Documentations et ressources
 
-#### Support multi-utilisateur
+* Site officiel de l'app : <https://mosquitto.org>
-
+* Documentation officielle utilisateur : <https://yunohost.org/apps>
- * L'authentification LDAP et HTTP est-elle prise en charge ? **Non**
+* Documentation officielle de l'admin : <https://mosquitto.org/documentation/>
- * L'application peut-elle être utilisée par plusieurs utilisateurs ? **Non**
+* Dépôt de code officiel de l'app : <https://github.com/eclipse/mosquitto>
-
+* Documentation YunoHost pour cette app : <https://yunohost.org/app_mosquitto>
-#### Architectures supportées
+* Signaler un bug : <https://github.com/YunoHost-Apps/mosquitto_ynh/issues>
-
- * x86-64 - [![Build Status](https://ci-apps.yunohost.org/ci/logs/mosquitto.svg)](https://ci-apps.yunohost.org/ci/apps/mosquitto/)
- * ARMv8-A - [![Build Status](https://ci-apps-arm.yunohost.org/ci/logs/mosquitto.svg)](https://ci-apps-arm.yunohost.org/ci/apps/mosquitto/)
-
-## Liens
-
- * Signaler un bug : https://github.com/YunoHost-Apps/mosquitto_ynh/issues
- * Site de l'application : https://mosquitto.org/
- * Dépôt de l'application principale : https://github.com/eclipse/mosquitto
- * Site web YunoHost : https://yunohost.org/
-
----
 
 ## Informations pour les développeurs
 
 Merci de faire vos pull request sur la [branche testing](https://github.com/YunoHost-Apps/mosquitto_ynh/tree/testing).
 
 Pour essayer la branche testing, procédez comme suit.
-```
+
+``` bash
 sudo yunohost app install https://github.com/YunoHost-Apps/mosquitto_ynh/tree/testing --debug
 ou
 sudo yunohost app upgrade mosquitto -u https://github.com/YunoHost-Apps/mosquitto_ynh/tree/testing --debug
 ```
 
----
+**Plus d'infos sur le packaging d'applications :** <https://yunohost.org/packaging_apps>
-
-## A faire
-
-- [ ] Ajouter MQTTS (MQTT avec TLS)

check_process

@@ -7,7 +7,10 @@
 		pkg_linter=1
 		setup_nourl=1
 		upgrade=1
+		# 1.5.7~ynh1
 		upgrade=1	from_commit=3423395180264623342ee41946d10f30cd38e471
+		# 2.0.8~ynh1
+		upgrade=1	from_commit=74185f9e1fb58a91271cfc24630029da662b6111
 		backup_restore=1
 		port_already_use=1 (1883)
 ;;; Options

conf/mosquitto.conf

@@ -1,4 +1,4 @@
 listener __PORT__
 
 allow_anonymous false
-password_file __PASSWORD_FILE__
+password_file /etc/mosquitto/passwd

doc/DESCRIPTION.md

@@ -0,0 +1 @@
+[Mosquitto](https://mosquitto.org/) gives you interconnect your objects and applications with an open source MQTT broker. Client can publish or subscribe after authentication (username, password).

doc/DESCRIPTION_fr.md

@@ -0,0 +1 @@
+[Mosquitto](https://mosquitto.org/) vous permet d'interconnecter vos objets et applications avec un broker MQTT open source. Le client peut publier ou s'abonner après authentification (nom d'utilisateur, mot de passe).

doc/DISCLAIMER.md

@@ -0,0 +1,3 @@
+## TODO
+
+- [ ] Add MQTTS (MQTT with TLS)

doc/DISCLAIMER_fr.md

@@ -0,0 +1,3 @@
+## A faire
+
+- [ ] Ajouter MQTTS (MQTT avec TLS)

manifest.json

@@ -6,15 +6,23 @@
         "en": "Interconnect your objects and applications with an open source MQTT broker",
         "fr": "Interconnecter vos objets et vos applications grâce à un serveur MQTT open source"
     },
-    "version": "2.0.8~ynh1",
+    "version": "2.0.12~ynh1",
     "url": "https://mosquitto.org/",
+    "upstream": {
+        "license": "MIT",
+        "website": "https://mosquitto.org",
+        "demo": "https://test.mosquitto.org",
+        "admindoc": "https://mosquitto.org/documentation/",
+        "userdoc": "https://yunohost.org/apps",
+        "code": "https://github.com/eclipse/mosquitto"
+    },
     "license": "MIT",
     "maintainer": {
         "name": "Grena",
         "email": "grena+mosquitto@grenabox.fr"
     },
     "requirements": {
-        "yunohost": ">= 4.1.0"
+        "yunohost": ">= 4.3.0"
     },
     "multi_instance": false,
     "services": [],
@@ -42,4 +50,3 @@
         ]
     }
 }
-

pull_request_template.md

@@ -1,16 +0,0 @@
-## Problem
-- *Description of why you made this PR*
-
-## Solution
-- *And how do you fix that problem*
-
-## PR Status
-- [ ] Code finished.
-- [ ] Tested with Package_check.
-- [ ] Fix or enhancement tested.
-- [ ] Upgrade from last version tested.
-- [ ] Can be reviewed and tested.
-
-## Package_check results
----
-* An automatic package_check will be launch at https://ci-apps-dev.yunohost.org/, when you add a specific comment to your Pull Request: "!testme", "!gogogadgetoci" or "By the power of systemd, I invoke The Great App CI to test this Pull Request!"*

scripts/_common.sh

@@ -4,16 +4,8 @@
 # COMMON VARIABLES
 #=================================================
 
-# files used by the app
-password_file="/etc/mosquitto/passwd"
-config_file="/etc/mosquitto/conf.d/default.conf"
-
-# extra repository used by the app
-extra_repo="deb https://repo.mosquitto.org/debian buster main"
-extra_repo_key="http://repo.mosquitto.org/debian/mosquitto-repo.gpg.key"
-
 # dependencies used by the app
-pkg_dependencies="mosquitto"
+extra_pkg_dependencies="mosquitto"
 
 #=================================================
 # PERSONAL HELPERS

scripts/backup

@@ -33,13 +33,6 @@ password=$(ynh_app_setting_get --app=$app --key=password)
 #=================================================
 ynh_print_info --message="Declaring files to be backed up..."
 
-#=================================================
-# BACKUP FAIL2BAN CONFIGURATION
-#=================================================
-
-#ynh_backup --src_path="/etc/fail2ban/jail.d/$app.conf"
-#ynh_backup --src_path="/etc/fail2ban/filter.d/$app.conf"
-
 #=================================================
 # SPECIFIC BACKUP
 #=================================================
@@ -53,14 +46,13 @@ ynh_backup --src_path="/etc/logrotate.d/$app"
 #=================================================
 
 # Backup the passwd file
-ynh_backup --src_path="$password_file"
+ynh_backup --src_path="/etc/mosquitto/passwd"
 
 # Backup the config file
-ynh_backup --src_path="$config_file"
+ynh_backup --src_path="/etc/mosquitto/conf.d/default.conf"
 
 #=================================================
 # END OF SCRIPT
 #=================================================
 
 ynh_print_info --message="Backup script completed for $app. (YunoHost will then actually copy those files to the archive)."
-

scripts/install

@@ -20,11 +20,11 @@ ynh_abort_if_errors
 # RETRIEVE ARGUMENTS FROM THE MANIFEST
 #=================================================
 
-app=$YNH_APP_INSTANCE_NAME
-
 username=$YNH_APP_ARG_USERNAME
 password=$YNH_APP_ARG_PASSWORD
 
+app=$YNH_APP_INSTANCE_NAME
+
 #=================================================
 # STORE SETTINGS FROM MANIFEST
 #=================================================
@@ -53,38 +53,19 @@ ynh_exec_warn_less yunohost firewall allow --no-upnp TCP $port
 #=================================================
 ynh_script_progression --message="Installing dependencies..." --weight=20
 
-ynh_install_extra_app_dependencies --repo="$extra_repo" --package="$pkg_dependencies" --key="$extra_repo_key" --name="$app"
+ynh_install_extra_app_dependencies --repo="deb https://repo.mosquitto.org/debian buster main" --package="$extra_pkg_dependencies" --key="http://repo.mosquitto.org/debian/mosquitto-repo.gpg.key" --name="$app"
 
 #=================================================
 # SPECIFIC SETUP
 #=================================================
-# CONFIGURE MOSQUITTO
+# ADD A CONFIGURATION
 #=================================================
-ynh_script_progression --message="Configuring Mosquitto Password..." --weight=1
+ynh_script_progression --message="Adding a configuration file..." --weight=1
 
-cp ../conf/passwd "$password_file"
+ynh_add_config --template="../conf/passwd" --destination="/etc/mosquitto/passwd"
+mosquitto_passwd -U "/etc/mosquitto/passwd"
 
-ynh_replace_string --match_string="__USERNAME__" --replace_string="$username" --target_file="$password_file"
+ynh_add_config --template="../conf/mosquitto.conf" --destination="/etc/mosquitto/conf.d/default.conf"
-ynh_replace_string --match_string="__PASSWORD__" --replace_string="$password" --target_file="$password_file"
-mosquitto_passwd -U "$password_file"
-
-ynh_store_file_checksum --file="$password_file"
-
-ynh_script_progression --message="Configuring Mosquitto..." --weight=1
-
-cp ../conf/mosquitto.conf "$config_file"
-
-ynh_replace_string --match_string="__PORT__" --replace_string="$port" --target_file="$config_file"
-ynh_replace_string --match_string="__PASSWORD_FILE__" --replace_string="$password_file" --target_file="$config_file"
-
-ynh_store_file_checksum --file="$config_file"
-
-#=================================================
-# RESTART SYSTEMD SERVICE
-#=================================================
-ynh_script_progression --message="Restarting systemd service..." --weight=1
-
-ynh_systemd_action --service_name="$app" --action=restart
 
 #=================================================
 # GENERIC FINALIZATION
@@ -104,16 +85,15 @@ ynh_script_progression --message="Integrating service in YunoHost..." --weight=1
 yunohost service add $app --description="Allows MQTT clients to send/receive data" --log="/var/log/$app/$app.log" --needs_exposed_ports="$port"
 
 #=================================================
-# SETUP FAIL2BAN
+# START SYSTEMD SERVICE
 #=================================================
-ynh_script_progression --message="Configuring Fail2Ban..." --weight=1
+ynh_script_progression --message="Starting a systemd service..." --weight=1
 
-# Create a dedicated Fail2Ban config
+# Start a systemd service
-#ynh_add_fail2ban_config --logpath="/var/log/$app/$app.log" --ports="$port" --failregex="Regex to match into the log for a failed login"
+ynh_systemd_action --service_name=$app --action="restart"
 
 #=================================================
 # END OF SCRIPT
 #=================================================
 
 ynh_script_progression --message="Installation of $app completed" --last
-

scripts/remove

@@ -17,8 +17,6 @@ ynh_script_progression --message="Loading installation settings..." --weight=2
 app=$YNH_APP_INSTANCE_NAME
 
 port=$(ynh_app_setting_get --app=$app --key=port)
-username=$(ynh_app_setting_get --app=$app --key=username)
-password=$(ynh_app_setting_get --app=$app --key=password)
 
 #=================================================
 # STANDARD REMOVE
@@ -41,14 +39,6 @@ ynh_script_progression --message="Stopping and removing the systemd service..."
 # Remove the dedicated systemd config
 ynh_remove_systemd_config
 
-#=================================================
-# REMOVE DEPENDENCIES
-#=================================================
-ynh_script_progression --message="Removing dependencies..." --weight=6
-
-# Remove metapackage and its dependencies
-ynh_remove_app_dependencies
-
 #=================================================
 # REMOVE LOGROTATE CONFIGURATION
 #=================================================
@@ -57,6 +47,14 @@ ynh_script_progression --message="Removing logrotate configuration..." --weight=
 # Remove the app-specific logrotate config
 ynh_remove_logrotate
 
+#=================================================
+# REMOVE DEPENDENCIES
+#=================================================
+ynh_script_progression --message="Removing dependencies..." --weight=6
+
+# Remove metapackage and its dependencies
+ynh_remove_app_dependencies
+
 #=================================================
 # CLOSE A PORT
 #=================================================
@@ -67,14 +65,6 @@ then
 	ynh_exec_warn_less yunohost firewall disallow TCP $port
 fi
 
-#=================================================
-# REMOVE FAIL2BAN CONFIGURATION
-#=================================================
-ynh_script_progression --message="Removing Fail2ban configuration..." --weight=1
-
-# Remove the dedicated Fail2Ban config
-#ynh_remove_fail2ban_config
-
 #=================================================
 # SPECIFIC REMOVE
 #=================================================
@@ -86,14 +76,13 @@ ynh_script_progression --message="Removing various files..." --weight=1
 ynh_secure_remove --file="/var/log/$app/$app.log"
 
 # Remove the passwd file
-ynh_secure_remove --file="$password_file"
+ynh_secure_remove --file="/etc/mosquitto/passwd"
 
 # Remove the config file
-ynh_secure_remove --file="$config_file"
+ynh_secure_remove --file="/etc/mosquitto/conf.d/default.conf"
 
 #=================================================
 # END OF SCRIPT
 #=================================================
 
 ynh_script_progression --message="Removal of $app completed" --last
-

scripts/restore

@@ -28,17 +28,6 @@ port=$(ynh_app_setting_get --app=$app --key=port)
 username=$(ynh_app_setting_get --app=$app --key=username)
 password=$(ynh_app_setting_get --app=$app --key=password)
 
-#=================================================
-# STANDARD RESTORATION STEPS
-#=================================================
-# RESTORE FAIL2BAN CONFIGURATION
-#=================================================
-ynh_script_progression --message="Restoring the Fail2Ban configuration..." --weight=1
-
-#ynh_restore_file "/etc/fail2ban/jail.d/$app.conf"
-#ynh_restore_file "/etc/fail2ban/filter.d/$app.conf"
-#ynh_systemd_action --action=restart --service_name=fail2ban
-
 #=================================================
 # SPECIFIC RESTORATION
 #=================================================
@@ -46,7 +35,25 @@ ynh_script_progression --message="Restoring the Fail2Ban configuration..." --wei
 #=================================================
 ynh_script_progression --message="Reinstalling dependencies..." --weight=20
 
-ynh_install_extra_app_dependencies --repo="$extra_repo" --package="$pkg_dependencies" --key="$extra_repo_key" --name="$app"
+ynh_install_extra_app_dependencies --repo="deb https://repo.mosquitto.org/debian buster main" --package="$extra_pkg_dependencies" --key="http://repo.mosquitto.org/debian/mosquitto-repo.gpg.key" --name="$app"
+
+#=================================================
+# RESTORE VARIOUS FILES
+#=================================================
+ynh_script_progression --message="Restoring various files..." --weight=1
+
+# Restore the passwd file
+ynh_restore_file --origin_path="/etc/mosquitto/passwd"
+
+# Restore the config file
+ynh_restore_file --origin_path="/etc/mosquitto/conf.d/default.conf"
+
+#=================================================
+# RESTORE THE LOGROTATE CONFIGURATION
+#=================================================
+ynh_script_progression --message="Restoring the logrotate configuration..." --weight=1
+
+ynh_restore_file --origin_path="/etc/logrotate.d/$app"
 
 #=================================================
 # INTEGRATE SERVICE IN YUNOHOST
@@ -56,33 +63,16 @@ ynh_script_progression --message="Integrating service in YunoHost..." --weight=1
 yunohost service add $app --description="Allows MQTT clients to send/receive data" --log="/var/log/$app/$app.log" --needs_exposed_ports="$port"
 
 #=================================================
-# RESTORE VARIOUS FILES
+# START SYSTEMD SERVICE
 #=================================================
-ynh_script_progression --message="Restoring the Mosquitto configuration..." --weight=1
+ynh_script_progression --message="Starting a systemd service..." --weight=1
 
-# Restore the passwd file
+ynh_systemd_action --service_name=$app --action="restart"
-ynh_restore_file --origin_path="$password_file"
-
-# Restore the config file
-ynh_restore_file --origin_path="$config_file"
 
 #=================================================
-# RESTART SYSTEMD SERVICE
+# GENERIC FINALIZATION
-#=================================================
-ynh_script_progression --message="Restarting systemd service..." --weight=1
-
-ynh_systemd_action --service_name="$app" --action=restart
-
-#=================================================
-# RESTORE THE LOGROTATE CONFIGURATION
-#=================================================
-ynh_script_progression --message="Restoring the log rotation..." --weight=1
-
-ynh_restore_file --origin_path="/etc/logrotate.d/$app"
-
 #=================================================
 # END OF SCRIPT
 #=================================================
 
 ynh_script_progression --message="Restoration completed for $app" --last
-

scripts/upgrade

@@ -23,14 +23,10 @@ password=$(ynh_app_setting_get --app=$app --key=password)
 #=================================================
 # CHECK VERSION
 #=================================================
+ynh_script_progression --message="Checking version..."
 
 upgrade_type=$(ynh_check_app_version_changed)
 
-#=================================================
-# ENSURE DOWNWARD COMPATIBILITY
-#=================================================
-ynh_script_progression --message="Ensuring downward compatibility..." --weight=1
-
 #=================================================
 # BACKUP BEFORE UPGRADE THEN ACTIVE TRAP
 #=================================================
@@ -47,51 +43,37 @@ ynh_abort_if_errors
 
 #=================================================
 # STANDARD UPGRADE STEPS
+#=================================================
+# STOP SYSTEMD SERVICE
+#=================================================
+ynh_script_progression --message="Stopping a systemd service..."
+
+ynh_systemd_action --service_name=$app --action="stop"
+
+#=================================================
+# ENSURE DOWNWARD COMPATIBILITY
+#=================================================
+ynh_script_progression --message="Ensuring downward compatibility..." --weight=1
+
 #=================================================
 # UPGRADE DEPENDENCIES
 #=================================================
 ynh_script_progression --message="Upgrading dependencies..." --weight=10
 
-ynh_install_extra_app_dependencies --repo="$extra_repo" --package="$pkg_dependencies" --key="$extra_repo_key" --name="$app"
+ynh_install_extra_app_dependencies --repo="deb https://repo.mosquitto.org/debian buster main" --package="$extra_pkg_dependencies" --key="http://repo.mosquitto.org/debian/mosquitto-repo.gpg.key" --name="$app"
 
 #=================================================
 # SPECIFIC UPGRADE
 #=================================================
-# MODIFY A CONFIG FILE
+# UPDATE A CONFIG FILE
 #=================================================
-ynh_script_progression --message="Configuring Mosquitto Password..." --weight=1
+ynh_script_progression --message="Updating a configuration file..." --weight=1
 
-# Verify the checksum and backup the file if it's different.
+ynh_add_config --template="../conf/passwd" --destination="/etc/mosquitto/passwd"
-ynh_backup_if_checksum_is_different --file="$password_file"
+mosquitto_passwd -U "/etc/mosquitto/passwd"
 
-cp ../conf/passwd "$password_file"
+ynh_add_config --template="../conf/mosquitto.conf" --destination="/etc/mosquitto/conf.d/default.conf"
 
-ynh_replace_string --match_string="__USERNAME__" --replace_string="$username" --target_file="$password_file"
-ynh_replace_string --match_string="__PASSWORD__" --replace_string="$password" --target_file="$password_file"
-mosquitto_passwd -U "$password_file"
-
-# Recalculate and store the checksum of the file for the next upgrade.
-ynh_store_file_checksum --file="$password_file"
-
-ynh_script_progression --message="Configuring Mosquitto..." --weight=1
-
-# Verify the checksum and backup the file if it's different.
-ynh_backup_if_checksum_is_different --file="$config_file"
-
-cp ../conf/mosquitto.conf "$config_file"
-
-ynh_replace_string --match_string="__PORT__" --replace_string="$port" --target_file="$config_file"
-ynh_replace_string --match_string="__PASSWORD_FILE__" --replace_string="$password_file" --target_file="$config_file"
-
-# Recalculate and store the checksum of the file for the next upgrade.
-ynh_store_file_checksum --file="$config_file"
-
-#=================================================
-# RESTART SYSTEMD SERVICE
-#=================================================
-ynh_script_progression --message="Restarting systemd service..." --weight=1
-
-ynh_systemd_action --service_name="$app" --action=restart
 
 #=================================================
 # GENERIC FINALIZATION
@@ -111,12 +93,11 @@ ynh_script_progression --message="Integrating service in YunoHost..." --weight=1
 yunohost service add $app --description="Allows MQTT clients to send/receive data" --log="/var/log/$app/$app.log" --needs_exposed_ports="$port"
 
 #=================================================
-# UPGRADE FAIL2BAN
+# START SYSTEMD SERVICE
 #=================================================
-ynh_script_progression --message="Reconfiguring Fail2Ban..." --weight=1
+ynh_script_progression --message="Starting a systemd service..." --weight=1
 
-# Create a dedicated Fail2Ban config
+ynh_systemd_action --service_name=$app --action="restart"
-#ynh_add_fail2ban_config --logpath="/var/log/nginx/${domain}-error.log" --failregex="Regex to match into the log for a failed login"
 
 #=================================================
 # END OF SCRIPT