First Comit: Initial Install (untested)

conf/motioneye.conf

@@ -0,0 +1,99 @@
+# path to the configuration directory (must be writable by motionEye)
+conf_path /etc/motioneye
+
+# path to the directory where pid files go (must be writable by motionEye)
+run_path /run/motioneye
+
+# path to the directory where log files go (must be writable by motionEye)
+log_path /var/log/motioneye
+
+# default output path for media files (must be writable by motionEye)
+media_path /var/lib/motioneye
+
+# the log level (use quiet, error, warning, info or debug)
+log_level info
+
+# the IP address to listen on
+# (0.0.0.0 for all interfaces, 127.0.0.1 for localhost)
+listen 0.0.0.0
+
+# the TCP port to listen on
+port 8765
+
+# path to the motion binary to use (automatically detected if commented)
+#motion_binary /usr/bin/motion
+
+# whether motion HTTP control interface listens on
+# localhost or on all interfaces
+motion_control_localhost true
+
+# the TCP port that motion HTTP control interface listens on
+motion_control_port 7999
+
+# interval in seconds at which motionEye checks if motion is running
+motion_check_interval 10
+
+# whether to restart the motion daemon when an error occurs while communicating with it
+motion_restart_on_errors false
+
+# interval in seconds at which motionEye checks the SMB mounts
+mount_check_interval 300
+
+# interval in seconds at which the janitor is called
+# to remove old pictures and movies
+cleanup_interval 43200
+
+# timeout in seconds to wait for response from a remote motionEye server
+remote_request_timeout 10
+
+# timeout in seconds to wait for mjpg data from the motion daemon
+mjpg_client_timeout 10
+
+# timeout in seconds after which an idle mjpg client is removed
+# (set to 0 to disable)
+mjpg_client_idle_timeout 10
+
+# enable SMB shares (requires motionEye to run as root and cifs-utils installed)
+smb_shares false
+
+# the directory where the SMB mount points will be created
+smb_mount_root /media
+
+# path to the wpa_supplicant.conf file
+# (enable this to configure wifi settings from the UI)
+#wpa_supplicant_conf /etc/wpa_supplicant.conf
+
+# path to the localtime file
+# (enable this to configure the system time zone from the UI)
+#local_time_file /etc/localtime
+
+# enables shutdown and rebooting after changing system settings
+# (such as wifi settings or time zone)
+enable_reboot false
+
+# timeout in seconds to use when talking to the SMTP server
+smtp_timeout 60
+
+# timeout in seconds to wait for media files list
+list_media_timeout 120
+
+# timeout in seconds to wait for media files list, when sending emails
+list_media_timeout_email 10
+
+# timeout in seconds to wait for media files list, when sending a telegram
+list_media_timeout_telegram 10
+
+# timeout in seconds to wait for zip file creation
+zip_timeout 500
+
+# timeout in seconds to wait for timelapse creation
+timelapse_timeout 500
+
+# enable adding and removing cameras from UI
+add_remove_cameras true
+
+# enables HTTP basic authentication scheme (in addition to, not instead of the signature mechanism)
+http_basic_auth false
+
+# overrides the hostname (useful if motionEye runs behind a reverse proxy)
+#server_name motionEye

conf/nginx.conf

@@ -3,24 +3,9 @@ location __PATH__/ {
 
   # Path to source
   alias __INSTALL_DIR__/;
-
+  proxy_pass http://localhost:8765;
-### Example PHP configuration (remove it if not used)
+  proxy_set_header Host $http_host;
-  index index.php;
+  more_set_headers "X-Frame-Options: ALLOWALL";
-
-  # Common parameter to increase upload size limit in conjunction with dedicated php-fpm file
-  #client_max_body_size 50M;
-
-  try_files $uri $uri/ index.php;
-  location ~ [^/]\.php(/|$) {
-    fastcgi_split_path_info ^(.+?\.php)(/.*)$;
-    fastcgi_pass unix:/var/run/php/php__PHPVERSION__-fpm-__NAME__.sock;
-
-    fastcgi_index index.php;
-    include fastcgi_params;
-    fastcgi_param REMOTE_USER $remote_user;
-    fastcgi_param PATH_INFO $fastcgi_path_info;
-    fastcgi_param SCRIPT_FILENAME $request_filename;
-  }
 ### End of PHP configuration part
 
   # Include SSOWAT user panel.

conf/php-fpm.conf

@@ -1,430 +0,0 @@
-; Start a new pool named 'www'.
-; the variable $pool can be used in any directive and will be replaced by the
-; pool name ('www' here)
-[__NAMETOCHANGE__]
-
-; Per pool prefix
-; It only applies on the following directives:
-; - 'access.log'
-; - 'slowlog'
-; - 'listen' (unixsocket)
-; - 'chroot'
-; - 'chdir'
-; - 'php_values'
-; - 'php_admin_values'
-; When not set, the global prefix (or /usr) applies instead.
-; Note: This directive can also be relative to the global prefix.
-; Default Value: none
-;prefix = /path/to/pools/$pool
-
-; Unix user/group of processes
-; Note: The user is mandatory. If the group is not set, the default user's group
-;       will be used.
-user = __USER__
-group = __USER__
-
-; The address on which to accept FastCGI requests.
-; Valid syntaxes are:
-;   'ip.add.re.ss:port'    - to listen on a TCP socket to a specific IPv4 address on
-;                            a specific port;
-;   '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on
-;                            a specific port;
-;   'port'                 - to listen on a TCP socket to all addresses
-;                            (IPv6 and IPv4-mapped) on a specific port;
-;   '/path/to/unix/socket' - to listen on a unix socket.
-; Note: This value is mandatory.
-listen = /var/run/php/php__PHPVERSION__-fpm-__NAMETOCHANGE__.sock
-
-; Set listen(2) backlog.
-; Default Value: 511 (-1 on FreeBSD and OpenBSD)
-;listen.backlog = 511
-
-; Set permissions for unix socket, if one is used. In Linux, read/write
-; permissions must be set in order to allow connections from a web server. Many
-; BSD-derived systems allow connections regardless of permissions.
-; Default Values: user and group are set as the running user
-;                 mode is set to 0660
-listen.owner = www-data
-listen.group = www-data
-;listen.mode = 0660
-; When POSIX Access Control Lists are supported you can set them using
-; these options, value is a comma separated list of user/group names.
-; When set, listen.owner and listen.group are ignored
-;listen.acl_users =
-;listen.acl_groups =
-
-; List of addresses (IPv4/IPv6) of FastCGI clients which are allowed to connect.
-; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
-; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
-; must be separated by a comma. If this value is left blank, connections will be
-; accepted from any ip address.
-; Default Value: any
-;listen.allowed_clients = 127.0.0.1
-
-; Specify the nice(2) priority to apply to the pool processes (only if set)
-; The value can vary from -19 (highest priority) to 20 (lower priority)
-; Note: - It will only work if the FPM master process is launched as root
-;       - The pool processes will inherit the master process priority
-;         unless it specified otherwise
-; Default Value: no set
-; process.priority = -19
-
-; Set the process dumpable flag (PR_SET_DUMPABLE prctl) even if the process user
-; or group is differrent than the master process user. It allows to create process
-; core dump and ptrace the process for the pool user.
-; Default Value: no
-; process.dumpable = yes
-
-; Choose how the process manager will control the number of child processes.
-; Possible Values:
-;   static  - a fixed number (pm.max_children) of child processes;
-;   dynamic - the number of child processes are set dynamically based on the
-;             following directives. With this process management, there will be
-;             always at least 1 children.
-;             pm.max_children      - the maximum number of children that can
-;                                    be alive at the same time.
-;             pm.start_servers     - the number of children created on startup.
-;             pm.min_spare_servers - the minimum number of children in 'idle'
-;                                    state (waiting to process). If the number
-;                                    of 'idle' processes is less than this
-;                                    number then some children will be created.
-;             pm.max_spare_servers - the maximum number of children in 'idle'
-;                                    state (waiting to process). If the number
-;                                    of 'idle' processes is greater than this
-;                                    number then some children will be killed.
-;  ondemand - no children are created at startup. Children will be forked when
-;             new requests will connect. The following parameter are used:
-;             pm.max_children           - the maximum number of children that
-;                                         can be alive at the same time.
-;             pm.process_idle_timeout   - The number of seconds after which
-;                                         an idle process will be killed.
-; Note: This value is mandatory.
-pm = dynamic
-
-; The number of child processes to be created when pm is set to 'static' and the
-; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.
-; This value sets the limit on the number of simultaneous requests that will be
-; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
-; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
-; CGI. The below defaults are based on a server without much resources. Don't
-; forget to tweak pm.* to fit your needs.
-; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
-; Note: This value is mandatory.
-pm.max_children = 5
-
-; The number of child processes created on startup.
-; Note: Used only when pm is set to 'dynamic'
-; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
-pm.start_servers = 2
-
-; The desired minimum number of idle server processes.
-; Note: Used only when pm is set to 'dynamic'
-; Note: Mandatory when pm is set to 'dynamic'
-pm.min_spare_servers = 1
-
-; The desired maximum number of idle server processes.
-; Note: Used only when pm is set to 'dynamic'
-; Note: Mandatory when pm is set to 'dynamic'
-pm.max_spare_servers = 3
-
-; The number of seconds after which an idle process will be killed.
-; Note: Used only when pm is set to 'ondemand'
-; Default Value: 10s
-;pm.process_idle_timeout = 10s;
-
-; The number of requests each child process should execute before respawning.
-; This can be useful to work around memory leaks in 3rd party libraries. For
-; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
-; Default Value: 0
-;pm.max_requests = 500
-
-; The URI to view the FPM status page. If this value is not set, no URI will be
-; recognized as a status page. It shows the following informations:
-;   pool                 - the name of the pool;
-;   process manager      - static, dynamic or ondemand;
-;   start time           - the date and time FPM has started;
-;   start since          - number of seconds since FPM has started;
-;   accepted conn        - the number of request accepted by the pool;
-;   listen queue         - the number of request in the queue of pending
-;                          connections (see backlog in listen(2));
-;   max listen queue     - the maximum number of requests in the queue
-;                          of pending connections since FPM has started;
-;   listen queue len     - the size of the socket queue of pending connections;
-;   idle processes       - the number of idle processes;
-;   active processes     - the number of active processes;
-;   total processes      - the number of idle + active processes;
-;   max active processes - the maximum number of active processes since FPM
-;                          has started;
-;   max children reached - number of times, the process limit has been reached,
-;                          when pm tries to start more children (works only for
-;                          pm 'dynamic' and 'ondemand');
-; Value are updated in real time.
-; Example output:
-;   pool:                 www
-;   process manager:      static
-;   start time:           01/Jul/2011:17:53:49 +0200
-;   start since:          62636
-;   accepted conn:        190460
-;   listen queue:         0
-;   max listen queue:     1
-;   listen queue len:     42
-;   idle processes:       4
-;   active processes:     11
-;   total processes:      15
-;   max active processes: 12
-;   max children reached: 0
-;
-; By default the status page output is formatted as text/plain. Passing either
-; 'html', 'xml' or 'json' in the query string will return the corresponding
-; output syntax. Example:
-;   http://www.foo.bar/status
-;   http://www.foo.bar/status?json
-;   http://www.foo.bar/status?html
-;   http://www.foo.bar/status?xml
-;
-; By default the status page only outputs short status. Passing 'full' in the
-; query string will also return status for each pool process.
-; Example:
-;   http://www.foo.bar/status?full
-;   http://www.foo.bar/status?json&full
-;   http://www.foo.bar/status?html&full
-;   http://www.foo.bar/status?xml&full
-; The Full status returns for each process:
-;   pid                  - the PID of the process;
-;   state                - the state of the process (Idle, Running, ...);
-;   start time           - the date and time the process has started;
-;   start since          - the number of seconds since the process has started;
-;   requests             - the number of requests the process has served;
-;   request duration     - the duration in µs of the requests;
-;   request method       - the request method (GET, POST, ...);
-;   request URI          - the request URI with the query string;
-;   content length       - the content length of the request (only with POST);
-;   user                 - the user (PHP_AUTH_USER) (or '-' if not set);
-;   script               - the main script called (or '-' if not set);
-;   last request cpu     - the %cpu the last request consumed
-;                          it's always 0 if the process is not in Idle state
-;                          because CPU calculation is done when the request
-;                          processing has terminated;
-;   last request memory  - the max amount of memory the last request consumed
-;                          it's always 0 if the process is not in Idle state
-;                          because memory calculation is done when the request
-;                          processing has terminated;
-; If the process is in Idle state, then informations are related to the
-; last request the process has served. Otherwise informations are related to
-; the current request being served.
-; Example output:
-;   ************************
-;   pid:                  31330
-;   state:                Running
-;   start time:           01/Jul/2011:17:53:49 +0200
-;   start since:          63087
-;   requests:             12808
-;   request duration:     1250261
-;   request method:       GET
-;   request URI:          /test_mem.php?N=10000
-;   content length:       0
-;   user:                 -
-;   script:               /home/fat/web/docs/php/test_mem.php
-;   last request cpu:     0.00
-;   last request memory:  0
-;
-; Note: There is a real-time FPM status monitoring sample web page available
-;       It's available in: /usr/share/php/7.0/fpm/status.html
-;
-; Note: The value must start with a leading slash (/). The value can be
-;       anything, but it may not be a good idea to use the .php extension or it
-;       may conflict with a real PHP file.
-; Default Value: not set
-;pm.status_path = /status
-
-; The ping URI to call the monitoring page of FPM. If this value is not set, no
-; URI will be recognized as a ping page. This could be used to test from outside
-; that FPM is alive and responding, or to
-; - create a graph of FPM availability (rrd or such);
-; - remove a server from a group if it is not responding (load balancing);
-; - trigger alerts for the operating team (24/7).
-; Note: The value must start with a leading slash (/). The value can be
-;       anything, but it may not be a good idea to use the .php extension or it
-;       may conflict with a real PHP file.
-; Default Value: not set
-;ping.path = /ping
-
-; This directive may be used to customize the response of a ping request. The
-; response is formatted as text/plain with a 200 response code.
-; Default Value: pong
-;ping.response = pong
-
-; The access log file
-; Default: not set
-;access.log = log/$pool.access.log
-
-; The access log format.
-; The following syntax is allowed
-;  %%: the '%' character
-;  %C: %CPU used by the request
-;      it can accept the following format:
-;      - %{user}C for user CPU only
-;      - %{system}C for system CPU only
-;      - %{total}C  for user + system CPU (default)
-;  %d: time taken to serve the request
-;      it can accept the following format:
-;      - %{seconds}d (default)
-;      - %{miliseconds}d
-;      - %{mili}d
-;      - %{microseconds}d
-;      - %{micro}d
-;  %e: an environment variable (same as $_ENV or $_SERVER)
-;      it must be associated with embraces to specify the name of the env
-;      variable. Some exemples:
-;      - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e
-;      - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e
-;  %f: script filename
-;  %l: content-length of the request (for POST request only)
-;  %m: request method
-;  %M: peak of memory allocated by PHP
-;      it can accept the following format:
-;      - %{bytes}M (default)
-;      - %{kilobytes}M
-;      - %{kilo}M
-;      - %{megabytes}M
-;      - %{mega}M
-;  %n: pool name
-;  %o: output header
-;      it must be associated with embraces to specify the name of the header:
-;      - %{Content-Type}o
-;      - %{X-Powered-By}o
-;      - %{Transfert-Encoding}o
-;      - ....
-;  %p: PID of the child that serviced the request
-;  %P: PID of the parent of the child that serviced the request
-;  %q: the query string
-;  %Q: the '?' character if query string exists
-;  %r: the request URI (without the query string, see %q and %Q)
-;  %R: remote IP address
-;  %s: status (response code)
-;  %t: server time the request was received
-;      it can accept a strftime(3) format:
-;      %d/%b/%Y:%H:%M:%S %z (default)
-;      The strftime(3) format must be encapsuled in a %{<strftime_format>}t tag
-;      e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t
-;  %T: time the log has been written (the request has finished)
-;      it can accept a strftime(3) format:
-;      %d/%b/%Y:%H:%M:%S %z (default)
-;      The strftime(3) format must be encapsuled in a %{<strftime_format>}t tag
-;      e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t
-;  %u: remote user
-;
-; Default: "%R - %u %t \"%m %r\" %s"
-;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%"
-
-; The log file for slow requests
-; Default Value: not set
-; Note: slowlog is mandatory if request_slowlog_timeout is set
-;slowlog = log/$pool.log.slow
-
-; The timeout for serving a single request after which a PHP backtrace will be
-; dumped to the 'slowlog' file. A value of '0s' means 'off'.
-; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
-; Default Value: 0
-;request_slowlog_timeout = 0
-
-; The timeout for serving a single request after which the worker process will
-; be killed. This option should be used when the 'max_execution_time' ini option
-; does not stop script execution for some reason. A value of '0' means 'off'.
-; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
-; Default Value: 0
-request_terminate_timeout = 1d
-
-; Set open file descriptor rlimit.
-; Default Value: system defined value
-;rlimit_files = 1024
-
-; Set max core size rlimit.
-; Possible Values: 'unlimited' or an integer greater or equal to 0
-; Default Value: system defined value
-;rlimit_core = 0
-
-; Chroot to this directory at the start. This value must be defined as an
-; absolute path. When this value is not set, chroot is not used.
-; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
-; of its subdirectories. If the pool prefix is not set, the global prefix
-; will be used instead.
-; Note: chrooting is a great security feature and should be used whenever
-;       possible. However, all PHP paths will be relative to the chroot
-;       (error_log, sessions.save_path, ...).
-; Default Value: not set
-;chroot =
-
-; Chdir to this directory at the start.
-; Note: relative path can be used.
-; Default Value: current directory or / when chroot
-chdir = __INSTALL_DIR__
-
-; Redirect worker stdout and stderr into main error log. If not set, stdout and
-; stderr will be redirected to /dev/null according to FastCGI specs.
-; Note: on highloaded environement, this can cause some delay in the page
-; process time (several ms).
-; Default Value: no
-;catch_workers_output = yes
-
-; Clear environment in FPM workers
-; Prevents arbitrary environment variables from reaching FPM worker processes
-; by clearing the environment in workers before env vars specified in this
-; pool configuration are added.
-; Setting to "no" will make all environment variables available to PHP code
-; via getenv(), $_ENV and $_SERVER.
-; Default Value: yes
-;clear_env = no
-
-; Limits the extensions of the main script FPM will allow to parse. This can
-; prevent configuration mistakes on the web server side. You should only limit
-; FPM to .php extensions to prevent malicious users to use other extensions to
-; execute php code.
-; Note: set an empty value to allow all extensions.
-; Default Value: .php
-;security.limit_extensions = .php .php3 .php4 .php5 .php7
-
-; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
-; the current environment.
-; Default Value: clean env
-;env[HOSTNAME] = $HOSTNAME
-;env[PATH] = /usr/local/bin:/usr/bin:/bin
-;env[TMP] = /tmp
-;env[TMPDIR] = /tmp
-;env[TEMP] = /tmp
-
-; Additional php.ini defines, specific to this pool of workers. These settings
-; overwrite the values previously defined in the php.ini. The directives are the
-; same as the PHP SAPI:
-;   php_value/php_flag             - you can set classic ini defines which can
-;                                    be overwritten from PHP call 'ini_set'.
-;   php_admin_value/php_admin_flag - these directives won't be overwritten by
-;                                     PHP call 'ini_set'
-; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
-
-; Defining 'extension' will load the corresponding shared extension from
-; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
-; overwrite previously defined php.ini values, but will append the new value
-; instead.
-
-; Note: path INI options can be relative and will be expanded with the prefix
-; (pool, global or /usr)
-
-; Default Value: nothing is defined by default except the values in php.ini and
-;                specified at startup with the -d argument
-;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com
-;php_flag[display_errors] = off
-;php_admin_value[error_log] = /var/log/fpm-php.www.log
-;php_admin_flag[log_errors] = on
-;php_admin_value[memory_limit] = 32M
-
-; Common values to change to increase file upload limit
-; php_admin_value[upload_max_filesize] = 50M
-; php_admin_value[post_max_size] = 50M
-; php_admin_flag[mail.add_x_header] = Off
-
-; Other common parameters
-; php_admin_value[max_execution_time] = 600
-; php_admin_value[max_input_time] = 300
-; php_admin_value[memory_limit] = 256M
-; php_admin_flag[short_open_tag] = On

conf/systemd.service

@@ -1,5 +1,5 @@
 [Unit]
-Description=Small description of the service
+Description=motionEye Server for Yunohost
 After=network.target
 
 [Service]
@@ -7,9 +7,10 @@ Type=simple
 User=__APP__
 Group=__APP__
 WorkingDirectory=__INSTALL_DIR__/
-ExecStart=__INSTALL_DIR__/script
+ExecStart=__INSTALL_DIR__/bin/meyectl startserver -c /etc/motioneye/motioneye.conf
 StandardOutput=append:/var/log/__APP__/__APP__.log
 StandardError=inherit
+Restart=on-abort
 
 # Sandboxing options to harden security
 # Depending on specificities of your service/app, you may need to tweak these

manifest.toml

@@ -2,23 +2,23 @@
 
 packaging_format = 2
 
-id = "example"
+id = "motioneye"
-name = "Example app"
+name = "motionEye"
 description.en = "Explain in *a few (10~15) words* the purpose of the app or what it actually does (it is meant to give a rough idea to users browsing a catalog of 100+ apps)"
 description.fr = "Expliquez en *quelques* (10~15) mots l'utilité de l'app ou ce qu'elle fait (l'objectif est de donner une idée grossière pour des utilisateurs qui naviguent dans un catalogue de 100+ apps)"
 
 version = "1.0~ynh1"
 
-maintainers = ["johndoe"]
+maintainers = ["solazdev"]
 
 [upstream]
 # NB: Only the "license" key is mandatory. Remove entries for which there's no relevant data
 license = "free"
-website = "https://example.com"
+website = "https://github.com/motioneye-project/motioneye"
 demo = "https://demo.example.com"
 admindoc = "https://yunohost.org/packaging_apps"
 userdoc = "https://yunohost.org/apps"
-code = "https://some.forge.com/example/example"
+code = "https://github.com/motioneye-project/motioneye"
 # FIXME: optional but recommended if relevant, this is meant to contain the Common Platform Enumeration, which is sort of a standard id for applications defined by the NIST. In particular, YunoHost may use this is in the future to easily track CVE (=security reports) related to apps. The CPE may be obtained by searching here: https://nvd.nist.gov/products/cpe/search. For example, for Nextcloud, the CPE is 'cpe:2.3:a:nextcloud:nextcloud' (no need to include the version number)
 cpe = "???"
 # FIXME: optional but recommended (or remove if irrelevant / not applicable). This is meant to be an URL where people can financially support this app, especially when its development is based on volunteers and/or financed by its community. YunoHost may later advertise it in the webadmin.
@@ -46,7 +46,7 @@ ram.runtime = "50M"
     [install.path]
     # this is a generic question - ask strings are automatically handled by YunoHost's core
     type = "path"
-    default = "/example"
+    default = "/motioneye"
 
     [install.init_main_permission]
     # this is a generic question - ask strings are automatically handled by YunoHost's core
@@ -54,17 +54,6 @@ ram.runtime = "50M"
     type = "group"
     default = "visitors"
 
-    [install.language]
-    ask.en = "Choose the application language"
-    ask.fr = "Choisissez la langue de l'application"
-    type = "select"
-    choices = ["fr", "en"]
-    default = "fr"
-
-    [install.admin]
-    # this is a generic question - ask strings are automatically handled by YunoHost's core
-    type = "user"
-
     [install.password]
     # this is a generic question - ask strings are automatically handled by YunoHost's core
     # Note that user-provided passwords questions are not automatically saved as setting
@@ -82,8 +71,8 @@ ram.runtime = "50M"
         # This will pre-fetch the asset which can then be deployed during the install/upgrade scripts with :
         #    ynh_setup_source --dest_dir="$install_dir"
         # You can also define other assets than "main" and add --source_id="foobar" in the previous command
-        url = "https://github.com/foo/bar/archive/refs/tags/v1.2.3.tar.gz"
+        url = "https://github.com/motioneye-project/motioneye/archive/dev.tar.gz"
-        sha256 = "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+        sha256 = "561f3350a0da8cabd01e82d92c56e146da5bd15712d1dcb647648c9a57d573c6"
 
         # These infos are used by https://github.com/YunoHost/apps/blob/master/tools/autoupdate_app_sources/autoupdate_app_sources.py
         # to auto-update the previous asset urls and sha256sum + manifest version
@@ -114,8 +103,4 @@ ram.runtime = "50M"
     [resources.apt]
     # This will automatically install/uninstall the following apt packages
     # and implicitly define the $phpversion setting as 8.0 (if phpX.Y-foobar dependencies are listed)
-    packages = "deb1, deb2, php8.0-foo, php8.0-bar"
+    packages = "ca-certificates, curl, python3, python3-dev, libcurl4-openssl-dev, gcc, libssl-dev, ffmpeg, v4l-utils, libssl-dev, libcurl4-openssl-dev, libjpeg-dev, zlib1g-dev, libffi-dev, libzbar-dev, libzbar0"
-
-    [resources.database]
-    # This will automatically provision/deprovison a MySQL DB and store the corresponding credentials in settings $db_user, $db_name, $db_pwd
-    type = "mysql"

scripts/backup

@@ -74,15 +74,6 @@ ynh_backup --src_path="/etc/cron.d/$app"
 
 ynh_backup --src_path="/etc/$app/"
 
-#=================================================
-# BACKUP THE MYSQL DATABASE
-#=================================================
-ynh_print_info --message="Backing up the MySQL database..."
-
-### (However, things like MySQL dumps *do* take some time to run, though the
-### copy of the generated dump to the archive still happens later)
-
-ynh_mysql_dump_db --database="$db_name" > db.sql
 
 #=================================================
 # END OF SCRIPT

scripts/install

@@ -37,13 +37,14 @@ source /usr/share/yunohost/helpers
 #=================================================
 ynh_script_progression --message="Setting up source files..." --weight=1
 
-### `ynh_setup_source` is used to install an app from a zip or tar.gz file,
+### `ynh_setup_source` is used to install an app from a zip or tar.gz file
 ### downloaded from an upstream source, like a git repository.
 ### `ynh_setup_source` use the file conf/app.src
 
 # Download, check integrity, uncompress and patch the source from app.src
 ynh_setup_source --dest_dir="$install_dir"
 
+
 # $install_dir will automatically be initialized with some decent 
 # permission by default ... however, you may need to recursively reapply
 # ownership to all files such as after the ynh_setup_source step
@@ -94,7 +95,7 @@ ynh_add_systemd_config
 ###		- As well as the section "INTEGRATE SERVICE IN YUNOHOST" in the restore script
 ###		- And the section "INTEGRATE SERVICE IN YUNOHOST" in the upgrade script
 
-yunohost service add $app --description="A short description of the app" --log="/var/log/$app/$app.log"
+yunohost service add $app --description="motionEye server for YunoHost" --log="/var/log/$app/$app.log"
 
 ### Additional options starting with 3.8:
 ###
@@ -145,13 +146,16 @@ ynh_script_progression --message="Adding a configuration file..." --weight=1
 ###
 ### Check the documentation of `ynh_add_config` for more info.
 
-ynh_add_config --template="some_config_file" --destination="$install_dir/some_config_file"
+mkdir -p /etc/motioneye
+mkdir -p /var/lib/motioneye
+ynh_add_config --template="../conf/motioneye.conf" --destination="etc/motioneye/motioneye.conf"
 
 # FIXME: this should be handled by the core in the future
 # You may need to use chmod 600 instead of 400,
 # for example if the app is expected to be able to modify its own config
-chmod 400 "$install_dir/some_config_file"
+chmod 400 "/etc/motioneye/motioneye.conf"
-chown $app:$app "$install_dir/some_config_file"
+chown $app:$app "/etc/motioneye/motioneye.conf"
+chown $app:$app "/var/lib/motioneye"
 
 ### For more complex cases where you want to replace stuff using regexes,
 ### you shoud rely on ynh_replace_string (which is basically a wrapper for sed)
@@ -169,9 +173,21 @@ chown $app:$app "$install_dir/some_config_file"
 ### so we're going to use curl to automatically fill the fields and submit the
 ### forms.
 
-# Installation with curl
+# # Installation with curl
-ynh_script_progression --message="Finalizing installation..." --weight=1
+# ynh_script_progression --message="Finalizing installation..." --weight=1
-ynh_local_curl "/INSTALL_PATH" "key1=value1" "key2=value2" "key3=value3"
+# ynh_local_curl "/INSTALL_PATH" "key1=value1" "key2=value2" "key3=value3"
+
+#=================================================
+# SETUP APPLICATION
+#=================================================
+ynh_script_progression --message="Installing python dependencies..." --weight=1
+
+
+pushd $final_path
+	python3 -m venv venv
+    venv/bin/pip install --upgrade pip
+    venv/bin/pip install dev.tar.gz
+popd
 
 #=================================================
 # GENERIC FINALIZATION