v2

conf/extra_php-fpm.conf

@@ -0,0 +1,4 @@
+; Additional php.ini defines, specific to this pool of workers.
+
+php_admin_value[upload_max_filesize] = 100M
+php_admin_value[post_max_size] = 100M

conf/nginx.conf

@@ -2,7 +2,7 @@
 location __PATH__/ {
 
   # Path to source
-  alias __INSTALL_DIR__/ ;
+  alias __INSTALL_DIR__/;
 
   index index.php;
 

conf/php-fpm.conf

@@ -1,430 +0,0 @@
-; Start a new pool named 'www'.
-; the variable $pool can be used in any directive and will be replaced by the
-; pool name ('www' here)
-[__NAMETOCHANGE__]
-
-; Per pool prefix
-; It only applies on the following directives:
-; - 'access.log'
-; - 'slowlog'
-; - 'listen' (unixsocket)
-; - 'chroot'
-; - 'chdir'
-; - 'php_values'
-; - 'php_admin_values'
-; When not set, the global prefix (or /usr) applies instead.
-; Note: This directive can also be relative to the global prefix.
-; Default Value: none
-;prefix = /path/to/pools/$pool
-
-; Unix user/group of processes
-; Note: The user is mandatory. If the group is not set, the default user's group
-;       will be used.
-user = __USER__
-group = __USER__
-
-; The address on which to accept FastCGI requests.
-; Valid syntaxes are:
-;   'ip.add.re.ss:port'    - to listen on a TCP socket to a specific IPv4 address on
-;                            a specific port;
-;   '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on
-;                            a specific port;
-;   'port'                 - to listen on a TCP socket to all addresses
-;                            (IPv6 and IPv4-mapped) on a specific port;
-;   '/path/to/unix/socket' - to listen on a unix socket.
-; Note: This value is mandatory.
-listen = /var/run/php/php__PHPVERSION__-fpm-__NAMETOCHANGE__.sock
-
-; Set listen(2) backlog.
-; Default Value: 511 (-1 on FreeBSD and OpenBSD)
-;listen.backlog = 511
-
-; Set permissions for unix socket, if one is used. In Linux, read/write
-; permissions must be set in order to allow connections from a web server. Many
-; BSD-derived systems allow connections regardless of permissions.
-; Default Values: user and group are set as the running user
-;                 mode is set to 0660
-listen.owner = www-data
-listen.group = www-data
-;listen.mode = 0660
-; When POSIX Access Control Lists are supported you can set them using
-; these options, value is a comma separated list of user/group names.
-; When set, listen.owner and listen.group are ignored
-;listen.acl_users =
-;listen.acl_groups =
-
-; List of addresses (IPv4/IPv6) of FastCGI clients which are allowed to connect.
-; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
-; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
-; must be separated by a comma. If this value is left blank, connections will be
-; accepted from any ip address.
-; Default Value: any
-;listen.allowed_clients = 127.0.0.1
-
-; Specify the nice(2) priority to apply to the pool processes (only if set)
-; The value can vary from -19 (highest priority) to 20 (lower priority)
-; Note: - It will only work if the FPM master process is launched as root
-;       - The pool processes will inherit the master process priority
-;         unless it specified otherwise
-; Default Value: no set
-; process.priority = -19
-
-; Set the process dumpable flag (PR_SET_DUMPABLE prctl) even if the process user
-; or group is differrent than the master process user. It allows to create process
-; core dump and ptrace the process for the pool user.
-; Default Value: no
-; process.dumpable = yes
-
-; Choose how the process manager will control the number of child processes.
-; Possible Values:
-;   static  - a fixed number (pm.max_children) of child processes;
-;   dynamic - the number of child processes are set dynamically based on the
-;             following directives. With this process management, there will be
-;             always at least 1 children.
-;             pm.max_children      - the maximum number of children that can
-;                                    be alive at the same time.
-;             pm.start_servers     - the number of children created on startup.
-;             pm.min_spare_servers - the minimum number of children in 'idle'
-;                                    state (waiting to process). If the number
-;                                    of 'idle' processes is less than this
-;                                    number then some children will be created.
-;             pm.max_spare_servers - the maximum number of children in 'idle'
-;                                    state (waiting to process). If the number
-;                                    of 'idle' processes is greater than this
-;                                    number then some children will be killed.
-;  ondemand - no children are created at startup. Children will be forked when
-;             new requests will connect. The following parameter are used:
-;             pm.max_children           - the maximum number of children that
-;                                         can be alive at the same time.
-;             pm.process_idle_timeout   - The number of seconds after which
-;                                         an idle process will be killed.
-; Note: This value is mandatory.
-pm = dynamic
-
-; The number of child processes to be created when pm is set to 'static' and the
-; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.
-; This value sets the limit on the number of simultaneous requests that will be
-; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
-; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
-; CGI. The below defaults are based on a server without much resources. Don't
-; forget to tweak pm.* to fit your needs.
-; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
-; Note: This value is mandatory.
-pm.max_children = 5
-
-; The number of child processes created on startup.
-; Note: Used only when pm is set to 'dynamic'
-; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
-pm.start_servers = 2
-
-; The desired minimum number of idle server processes.
-; Note: Used only when pm is set to 'dynamic'
-; Note: Mandatory when pm is set to 'dynamic'
-pm.min_spare_servers = 1
-
-; The desired maximum number of idle server processes.
-; Note: Used only when pm is set to 'dynamic'
-; Note: Mandatory when pm is set to 'dynamic'
-pm.max_spare_servers = 3
-
-; The number of seconds after which an idle process will be killed.
-; Note: Used only when pm is set to 'ondemand'
-; Default Value: 10s
-;pm.process_idle_timeout = 10s;
-
-; The number of requests each child process should execute before respawning.
-; This can be useful to work around memory leaks in 3rd party libraries. For
-; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
-; Default Value: 0
-;pm.max_requests = 500
-
-; The URI to view the FPM status page. If this value is not set, no URI will be
-; recognized as a status page. It shows the following informations:
-;   pool                 - the name of the pool;
-;   process manager      - static, dynamic or ondemand;
-;   start time           - the date and time FPM has started;
-;   start since          - number of seconds since FPM has started;
-;   accepted conn        - the number of request accepted by the pool;
-;   listen queue         - the number of request in the queue of pending
-;                          connections (see backlog in listen(2));
-;   max listen queue     - the maximum number of requests in the queue
-;                          of pending connections since FPM has started;
-;   listen queue len     - the size of the socket queue of pending connections;
-;   idle processes       - the number of idle processes;
-;   active processes     - the number of active processes;
-;   total processes      - the number of idle + active processes;
-;   max active processes - the maximum number of active processes since FPM
-;                          has started;
-;   max children reached - number of times, the process limit has been reached,
-;                          when pm tries to start more children (works only for
-;                          pm 'dynamic' and 'ondemand');
-; Value are updated in real time.
-; Example output:
-;   pool:                 www
-;   process manager:      static
-;   start time:           01/Jul/2011:17:53:49 +0200
-;   start since:          62636
-;   accepted conn:        190460
-;   listen queue:         0
-;   max listen queue:     1
-;   listen queue len:     42
-;   idle processes:       4
-;   active processes:     11
-;   total processes:      15
-;   max active processes: 12
-;   max children reached: 0
-;
-; By default the status page output is formatted as text/plain. Passing either
-; 'html', 'xml' or 'json' in the query string will return the corresponding
-; output syntax. Example:
-;   http://www.foo.bar/status
-;   http://www.foo.bar/status?json
-;   http://www.foo.bar/status?html
-;   http://www.foo.bar/status?xml
-;
-; By default the status page only outputs short status. Passing 'full' in the
-; query string will also return status for each pool process.
-; Example:
-;   http://www.foo.bar/status?full
-;   http://www.foo.bar/status?json&full
-;   http://www.foo.bar/status?html&full
-;   http://www.foo.bar/status?xml&full
-; The Full status returns for each process:
-;   pid                  - the PID of the process;
-;   state                - the state of the process (Idle, Running, ...);
-;   start time           - the date and time the process has started;
-;   start since          - the number of seconds since the process has started;
-;   requests             - the number of requests the process has served;
-;   request duration     - the duration in µs of the requests;
-;   request method       - the request method (GET, POST, ...);
-;   request URI          - the request URI with the query string;
-;   content length       - the content length of the request (only with POST);
-;   user                 - the user (PHP_AUTH_USER) (or '-' if not set);
-;   script               - the main script called (or '-' if not set);
-;   last request cpu     - the %cpu the last request consumed
-;                          it's always 0 if the process is not in Idle state
-;                          because CPU calculation is done when the request
-;                          processing has terminated;
-;   last request memory  - the max amount of memory the last request consumed
-;                          it's always 0 if the process is not in Idle state
-;                          because memory calculation is done when the request
-;                          processing has terminated;
-; If the process is in Idle state, then informations are related to the
-; last request the process has served. Otherwise informations are related to
-; the current request being served.
-; Example output:
-;   ************************
-;   pid:                  31330
-;   state:                Running
-;   start time:           01/Jul/2011:17:53:49 +0200
-;   start since:          63087
-;   requests:             12808
-;   request duration:     1250261
-;   request method:       GET
-;   request URI:          /test_mem.php?N=10000
-;   content length:       0
-;   user:                 -
-;   script:               /home/fat/web/docs/php/test_mem.php
-;   last request cpu:     0.00
-;   last request memory:  0
-;
-; Note: There is a real-time FPM status monitoring sample web page available
-;       It's available in: /usr/share/php/7.0/fpm/status.html
-;
-; Note: The value must start with a leading slash (/). The value can be
-;       anything, but it may not be a good idea to use the .php extension or it
-;       may conflict with a real PHP file.
-; Default Value: not set
-;pm.status_path = /status
-
-; The ping URI to call the monitoring page of FPM. If this value is not set, no
-; URI will be recognized as a ping page. This could be used to test from outside
-; that FPM is alive and responding, or to
-; - create a graph of FPM availability (rrd or such);
-; - remove a server from a group if it is not responding (load balancing);
-; - trigger alerts for the operating team (24/7).
-; Note: The value must start with a leading slash (/). The value can be
-;       anything, but it may not be a good idea to use the .php extension or it
-;       may conflict with a real PHP file.
-; Default Value: not set
-;ping.path = /ping
-
-; This directive may be used to customize the response of a ping request. The
-; response is formatted as text/plain with a 200 response code.
-; Default Value: pong
-;ping.response = pong
-
-; The access log file
-; Default: not set
-;access.log = log/$pool.access.log
-
-; The access log format.
-; The following syntax is allowed
-;  %%: the '%' character
-;  %C: %CPU used by the request
-;      it can accept the following format:
-;      - %{user}C for user CPU only
-;      - %{system}C for system CPU only
-;      - %{total}C  for user + system CPU (default)
-;  %d: time taken to serve the request
-;      it can accept the following format:
-;      - %{seconds}d (default)
-;      - %{miliseconds}d
-;      - %{mili}d
-;      - %{microseconds}d
-;      - %{micro}d
-;  %e: an environment variable (same as $_ENV or $_SERVER)
-;      it must be associated with embraces to specify the name of the env
-;      variable. Some exemples:
-;      - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e
-;      - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e
-;  %f: script filename
-;  %l: content-length of the request (for POST request only)
-;  %m: request method
-;  %M: peak of memory allocated by PHP
-;      it can accept the following format:
-;      - %{bytes}M (default)
-;      - %{kilobytes}M
-;      - %{kilo}M
-;      - %{megabytes}M
-;      - %{mega}M
-;  %n: pool name
-;  %o: output header
-;      it must be associated with embraces to specify the name of the header:
-;      - %{Content-Type}o
-;      - %{X-Powered-By}o
-;      - %{Transfert-Encoding}o
-;      - ....
-;  %p: PID of the child that serviced the request
-;  %P: PID of the parent of the child that serviced the request
-;  %q: the query string
-;  %Q: the '?' character if query string exists
-;  %r: the request URI (without the query string, see %q and %Q)
-;  %R: remote IP address
-;  %s: status (response code)
-;  %t: server time the request was received
-;      it can accept a strftime(3) format:
-;      %d/%b/%Y:%H:%M:%S %z (default)
-;      The strftime(3) format must be encapsuled in a %{<strftime_format>}t tag
-;      e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t
-;  %T: time the log has been written (the request has finished)
-;      it can accept a strftime(3) format:
-;      %d/%b/%Y:%H:%M:%S %z (default)
-;      The strftime(3) format must be encapsuled in a %{<strftime_format>}t tag
-;      e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t
-;  %u: remote user
-;
-; Default: "%R - %u %t \"%m %r\" %s"
-;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%"
-
-; The log file for slow requests
-; Default Value: not set
-; Note: slowlog is mandatory if request_slowlog_timeout is set
-;slowlog = log/$pool.log.slow
-
-; The timeout for serving a single request after which a PHP backtrace will be
-; dumped to the 'slowlog' file. A value of '0s' means 'off'.
-; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
-; Default Value: 0
-;request_slowlog_timeout = 0
-
-; The timeout for serving a single request after which the worker process will
-; be killed. This option should be used when the 'max_execution_time' ini option
-; does not stop script execution for some reason. A value of '0' means 'off'.
-; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
-; Default Value: 0
-request_terminate_timeout = 1d
-
-; Set open file descriptor rlimit.
-; Default Value: system defined value
-;rlimit_files = 1024
-
-; Set max core size rlimit.
-; Possible Values: 'unlimited' or an integer greater or equal to 0
-; Default Value: system defined value
-;rlimit_core = 0
-
-; Chroot to this directory at the start. This value must be defined as an
-; absolute path. When this value is not set, chroot is not used.
-; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
-; of its subdirectories. If the pool prefix is not set, the global prefix
-; will be used instead.
-; Note: chrooting is a great security feature and should be used whenever
-;       possible. However, all PHP paths will be relative to the chroot
-;       (error_log, sessions.save_path, ...).
-; Default Value: not set
-;chroot =
-
-; Chdir to this directory at the start.
-; Note: relative path can be used.
-; Default Value: current directory or / when chroot
-chdir = __INSTALL_DIR__
-
-; Redirect worker stdout and stderr into main error log. If not set, stdout and
-; stderr will be redirected to /dev/null according to FastCGI specs.
-; Note: on highloaded environement, this can cause some delay in the page
-; process time (several ms).
-; Default Value: no
-;catch_workers_output = yes
-
-; Clear environment in FPM workers
-; Prevents arbitrary environment variables from reaching FPM worker processes
-; by clearing the environment in workers before env vars specified in this
-; pool configuration are added.
-; Setting to "no" will make all environment variables available to PHP code
-; via getenv(), $_ENV and $_SERVER.
-; Default Value: yes
-;clear_env = no
-
-; Limits the extensions of the main script FPM will allow to parse. This can
-; prevent configuration mistakes on the web server side. You should only limit
-; FPM to .php extensions to prevent malicious users to use other extensions to
-; execute php code.
-; Note: set an empty value to allow all extensions.
-; Default Value: .php
-;security.limit_extensions = .php .php3 .php4 .php5 .php7
-
-; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
-; the current environment.
-; Default Value: clean env
-;env[HOSTNAME] = $HOSTNAME
-;env[PATH] = /usr/local/bin:/usr/bin:/bin
-;env[TMP] = /tmp
-;env[TMPDIR] = /tmp
-;env[TEMP] = /tmp
-
-; Additional php.ini defines, specific to this pool of workers. These settings
-; overwrite the values previously defined in the php.ini. The directives are the
-; same as the PHP SAPI:
-;   php_value/php_flag             - you can set classic ini defines which can
-;                                    be overwritten from PHP call 'ini_set'.
-;   php_admin_value/php_admin_flag - these directives won't be overwritten by
-;                                     PHP call 'ini_set'
-; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
-
-; Defining 'extension' will load the corresponding shared extension from
-; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
-; overwrite previously defined php.ini values, but will append the new value
-; instead.
-
-; Note: path INI options can be relative and will be expanded with the prefix
-; (pool, global or /usr)
-
-; Default Value: nothing is defined by default except the values in php.ini and
-;                specified at startup with the -d argument
-;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com
-;php_flag[display_errors] = off
-;php_admin_value[error_log] = /var/log/fpm-php.www.log
-;php_admin_flag[log_errors] = on
-;php_admin_value[memory_limit] = 32M
-
-; Common values to change to increase file upload limit
-php_admin_value[upload_max_filesize] = 100M
-php_admin_value[post_max_size] = 100M
-; php_admin_flag[mail.add_x_header] = Off
-
-; Other common parameters
-; php_admin_value[max_execution_time] = 600
-; php_admin_value[max_input_time] = 300
-; php_admin_value[memory_limit] = 256M
-; php_admin_flag[short_open_tag] = On

doc/POST_INSTALL.md

@@ -0,0 +1,3 @@
+Database login:    __DB_USER__
+Database name:     __DB_NAME__
+Database password: __DB_PWD__

doc/PRE_UPGRADE.md.md

@@ -1,6 +1,3 @@
-* How to post-install:
-    * The database credentials are send to the admin be email.
-
 * How to upgrade:
 	* Remove the lock file `sudo rm /var/www/mybb/install/lock`
     * and follow the post install `https://www.domain.ltd/mybb/install/upgrade.php`

manifest.json

@@ -1,52 +0,0 @@
-{
-    "name": "MyBB",
-    "id": "mybb",
-    "packaging_format": 1,
-    "description": {
-        "en": "Forum software",
-        "fr": "Forum open source et libre"
-    },
-    "version": "1.8.31~ynh1",
-    "url": "https://mybb.com/",
-    "upstream": {
-        "license": "LGPL-3.0-only",
-        "website": "https://mybb.com/",
-        "demo": "https://demomybb.tk/",
-        "admindoc": "https://docs.mybb.com/1.8/administration/",
-        "code": "https://github.com/mybb/mybb",
-        "cpe": "cpe:2.3:a:mybb:mybb"
-    },
-    "license": "LGPL-3.0-only",
-    "maintainer": {
-        "name": "",
-        "email": ""
-    },
-    "requirements": {
-        "yunohost": ">= 11.0.9"
-    },
-    "multi_instance": true,
-    "services": [
-        "nginx",
-        "php8.0-fpm",
-        "mysql"
-    ],
-    "arguments": {
-        "install": [
-            {
-                "name": "domain",
-                "type": "domain"
-            },
-            {
-                "name": "path",
-                "type": "path",
-                "example": "/mybb",
-                "default": "/mybb"
-            },
-            {
-                "name": "is_public",
-                "type": "boolean",
-                "default": true
-            }
-        ]
-    }
-}

manifest.toml

@@ -15,26 +15,22 @@ website = "https://mybb.com/"
 demo = "https://demomybb.tk/"
 admindoc = "https://docs.mybb.com/1.8/administration/"
 code = "https://github.com/mybb/mybb"
-cpe = "???" # FIXME: optional but recommended if relevant, this is meant to contain the Common Platform Enumeration, which is sort of a standard id for applications defined by the NIST. In particular, Yunohost may use this is in the future to easily track CVE (=security reports) related to apps. The CPE may be obtained by searching here: https://nvd.nist.gov/products/cpe/search. For example, for Nextcloud, the CPE is 'cpe:2.3:a:nextcloud:nextcloud' (no need to include the version number)
-fund = "???" # FIXME: optional but recommended (or remove if irrelevant / not applicable). This is meant to be an URL where people can financially support this app, especially when its development is based on volunteers and/or financed by its community. YunoHost may later advertise it in the webadmin.
 
 [integration]
-yunohost = ">= 11.0.9"
+yunohost = ">= 11.1.15"
-architectures = "all" # FIXME: can be replaced by a list of supported archs using the dpkg --print-architecture nomenclature (amd64/i386/armhf/arm64), for example: ["amd64", "i386"]
+architectures = "all"
 multi_instance = true
-ldap = "?" # FIXME: replace with true, false, or "not_relevant". Not to confuse with the "sso" key : the "ldap" key corresponds to wether or not a user *can* login on the app using its YunoHost credentials.
+ldap = false
-sso = "?" # FIXME: replace with true, false, or "not_relevant". Not to confuse with the "ldap" key : the "sso" key corresponds to wether or not a user is *automatically logged-in* on the app when logged-in on the YunoHost portal.
+sso = false
-disk = "50M" # FIXME: replace with an **estimate** minimum disk requirement. e.g. 20M, 400M, 1G, ...
+disk = "50M"
-ram.build = "50M" # FIXME: replace with an **estimate** minimum ram requirement. e.g. 50M, 400M, 1G, ...
+ram.build = "50M"
-ram.runtime = "50M" # FIXME: replace with an **estimate** minimum ram requirement. e.g. 50M, 400M, 1G, ...
+ram.runtime = "50M"
 
 [install]
     [install.domain]
-    # this is a generic question - ask strings are automatically handled by Yunohost's core
     type = "domain"
 
     [install.path]
-    # this is a generic question - ask strings are automatically handled by Yunohost's core
     type = "path"
     default = "/mybb"
 
@@ -48,7 +44,6 @@ ram.runtime = "50M" # FIXME: replace with an **estimate** minimum ram requiremen
         sha256 = "e88354f10893512ea8f426aff9d6a48f7e2cb20bd3988b001c59c9f29084c2f1"
         in_subdir = false
 
-
     [resources.system_user]
 
     [resources.install_dir]
@@ -56,5 +51,8 @@ ram.runtime = "50M" # FIXME: replace with an **estimate** minimum ram requiremen
     [resources.permissions]
     main.url = "/"
 
+    [resources.apt]
+    paclages = "mariadb-server php8.0-mysql php8.0-xml"
+
     [resources.database]
     type = "mysql"

scripts/_common.sh

@@ -4,10 +4,6 @@
 # COMMON VARIABLES
 #=================================================
 
-#REMOVEME? YNH_PHP_VERSION="8.0"
-
-#REMOVEME? pkg_dependencies="php${YNH_PHP_VERSION}-mysql php${YNH_PHP_VERSION}-xml"
-
 #=================================================
 # PERSONAL HELPERS
 #=================================================
@@ -20,60 +16,3 @@
 # FUTURE OFFICIAL HELPERS
 #=================================================
 
-
-# Send an email to inform the administrator
-#
-# usage: ynh_send_readme_to_admin app_message [recipients]
-# | arg: app_message - The message to send to the administrator.
-# | arg: recipients - The recipients of this email. Use spaces to separate multiples recipients. - default: root
-#	example: "root admin@domain"
-#	If you give the name of a YunoHost user, ynh_send_readme_to_admin will find its email adress for you
-#	example: "root admin@domain user1 user2"
-ynh_send_readme_to_admin() {
-	local app_message="${1:-...No specific information...}"
-	local recipients="${2:-root}"
-
-	# Retrieve the email of users
-	find_mails () {
-		local list_mails="$1"
-		local mail
-		local recipients=" "
-		# Read each mail in argument
-		for mail in $list_mails
-		do
-			# Keep root or a real email address as it is
-			if [ "$mail" = "root" ] || echo "$mail" | grep --quiet "@"
-			then
-				recipients="$recipients $mail"
-			else
-				# But replace an user name without a domain after by its email
-				if mail=$(ynh_user_get_info "$mail" "mail" 2> /dev/null)
-				then
-					recipients="$recipients $mail"
-				fi
-			fi
-		done
-		echo "$recipients"
-	}
-	recipients=$(find_mails "$recipients")
-
-	local mail_subject="☁️🆈🅽🅷☁️: \`$app\` has important message for you"
-
-	local mail_message="This is an automated message from your beloved YunoHost server.
-Specific information for the application $app.
-$app_message
----
-Automatic diagnosis data from YunoHost
-$(yunohost tools diagnosis | grep -B 100 "services:" | sed '/services:/d')"
-	
-	# Define binary to use for mail command
-	if [ -e /usr/bin/bsd-mailx ]
-	then
-		local mail_bin=/usr/bin/bsd-mailx
-	else
-		local mail_bin=/usr/bin/mail.mailutils
-	fi
-
-	# Send the email to the recipients
-	echo "$mail_message" | $mail_bin -a "Content-Type: text/plain; charset=UTF-8" -s "$mail_subject" "$recipients"
-}

scripts/backup

@@ -10,29 +10,6 @@
 source ../settings/scripts/_common.sh
 source /usr/share/yunohost/helpers
 
-#=================================================
-# MANAGE SCRIPT FAILURE
-#=================================================
-
-#REMOVEME? ynh_clean_setup () {
-	### Remove this function if there's nothing to clean before calling the remove script.
-	true
-}
-# Exit if an error occurs during the execution of the script
-#REMOVEME? ynh_abort_if_errors
-
-#=================================================
-# LOAD SETTINGS
-#=================================================
-#REMOVEME? ynh_print_info --message="Loading installation settings..."
-
-#REMOVEME? app=$YNH_APP_INSTANCE_NAME
-
-#REMOVEME? #REMOVEME? install_dir=$(ynh_app_setting_get --app=$app --key=install_dir)
-#REMOVEME? domain=$(ynh_app_setting_get --app=$app --key=domain)
-#REMOVEME? db_name=$(ynh_app_setting_get --app=$app --key=db_name)
-#REMOVEME? phpversion=$(ynh_app_setting_get --app=$app --key=phpversion)
-
 #=================================================
 # DECLARE DATA AND CONF FILES TO BACKUP
 #=================================================

scripts/change_url

@@ -9,59 +9,6 @@
 source _common.sh
 source /usr/share/yunohost/helpers
 
-#=================================================
-# RETRIEVE ARGUMENTS
-#=================================================
-
-#REMOVEME? old_domain=$YNH_APP_OLD_DOMAIN
-#REMOVEME? old_path=$YNH_APP_OLD_PATH
-
-#REMOVEME? new_domain=$YNH_APP_NEW_DOMAIN
-#REMOVEME? new_path=$YNH_APP_NEW_PATH
-
-#REMOVEME? app=$YNH_APP_INSTANCE_NAME
-
-#=================================================
-# LOAD SETTINGS
-#=================================================
-#REMOVEME? ynh_script_progression --message="Loading installation settings..." --weight=1
-
-#REMOVEME? # Needed for helper "ynh_add_nginx_config"
-#REMOVEME? #REMOVEME? install_dir=$(ynh_app_setting_get --app=$app --key=install_dir)
-
-#=================================================
-# BACKUP BEFORE CHANGE URL THEN ACTIVE TRAP
-#=================================================
-#REMOVEME? ynh_script_progression --message="Backing up the app before changing its URL (may take a while)..." --weight=1
-
-# Backup the current version of the app
-#REMOVEME? ynh_backup_before_upgrade
-#REMOVEME? ynh_clean_setup () {
-	# Remove the new domain config file, the remove script won't do it as it doesn't know yet its location.
-#REMOVEME? 	ynh_secure_remove --file="/etc/nginx/conf.d/$new_domain.d/$app.conf"
-
-	# Restore it if the upgrade fails
-#REMOVEME? 	ynh_restore_upgradebackup
-}
-# Exit if an error occurs during the execution of the script
-#REMOVEME? ynh_abort_if_errors
-
-#=================================================
-# CHECK WHICH PARTS SHOULD BE CHANGED
-#=================================================
-
-#REMOVEME? change_domain=0
-#REMOVEME? if [ "$old_domain" != "$new_domain" ]
-then
-	#REMOVEME? change_domain=1
-fi
-
-#REMOVEME? change_path=0
-#REMOVEME? if [ "$old_path" != "$new_path" ]
-then
-	#REMOVEME? change_path=1
-fi
-
 #=================================================
 # MODIFY URL IN NGINX CONF
 #=================================================
@@ -69,37 +16,6 @@ ynh_script_progression --message="Updating NGINX web server configuration..." --
 
 ynh_change_url_nginx_config
 
-#REMOVEME? nginx_conf_path=/etc/nginx/conf.d/$old_domain.d/$app.conf
-
-# Change the path in the NGINX config file
-if [ $change_path -eq 1 ]
-then
-	# Make a backup of the original NGINX config file if modified
-#REMOVEME? 	ynh_backup_if_checksum_is_different --file="$nginx_conf_path"
-	# Set global variables for NGINX helper
-#REMOVEME? 	domain="$old_domain"
-#REMOVEME? 	path="$new_path"
-	# Create a dedicated NGINX config
-#REMOVEME? 	ynh_add_nginx_config
-fi
-
-# Change the domain for NGINX
-if [ $change_domain -eq 1 ]
-then
-	# Delete file checksum for the old conf file location
-#REMOVEME? 	ynh_delete_file_checksum --file="$nginx_conf_path"
-#REMOVEME? 	mv $nginx_conf_path /etc/nginx/conf.d/$new_domain.d/$app.conf
-	# Store file checksum for the new config file location
-#REMOVEME? 	ynh_store_file_checksum --file="/etc/nginx/conf.d/$new_domain.d/$app.conf"
-fi
-
-#=================================================
-# RELOAD NGINX
-#=================================================
-#REMOVEME? ynh_script_progression --message="Reloading NGINX web server..." --weight=1
-
-#REMOVEME? #REMOVEME? ynh_systemd_action --service_name=nginx --action=reload
-
 #=================================================
 # END OF SCRIPT
 #=================================================

scripts/install

@@ -9,82 +9,16 @@
 source _common.sh
 source /usr/share/yunohost/helpers
 
-#=================================================
-# MANAGE SCRIPT FAILURE
-#=================================================
-
-#REMOVEME? ynh_clean_setup () {
-	### Remove this function if there's nothing to clean before calling the remove script.
-	true
-}
-# Exit if an error occurs during the execution of the script
-#REMOVEME? ynh_abort_if_errors
-
-#=================================================
-# RETRIEVE ARGUMENTS FROM THE MANIFEST
-#=================================================
-
-#REMOVEME? domain=$YNH_APP_ARG_DOMAIN
-#REMOVEME? path=$YNH_APP_ARG_PATH
-#REMOVEME? is_public=$YNH_APP_ARG_IS_PUBLIC
-
-#REMOVEME? app=$YNH_APP_INSTANCE_NAME
-
-#=================================================
-# CHECK IF THE APP CAN BE INSTALLED WITH THESE ARGS
-#=================================================
-#REMOVEME? ynh_script_progression --message="Validating installation parameters..." --weight=1
-
-#REMOVEME? install_dir=/var/www/$app
-#REMOVEME? test ! -e "$install_dir" || ynh_die --message="This path already contains a folder"
-
-# Register (book) web path
-#REMOVEME? ynh_webpath_register --app=$app --domain=$domain --path=$path
-
-#=================================================
-# STORE SETTINGS FROM MANIFEST
-#=================================================
-#REMOVEME? ynh_script_progression --message="Storing installation settings..." --weight=1
-
-#REMOVEME? ynh_app_setting_set --app=$app --key=domain --value=$domain
-#REMOVEME? ynh_app_setting_set --app=$app --key=path --value=$path
-
-#=================================================
-# INSTALL DEPENDENCIES
-#=================================================
-#REMOVEME? ynh_script_progression --message="Installing dependencies..." --weight=2
-
-#REMOVEME? ynh_install_app_dependencies $pkg_dependencies
-
-#=================================================
-# CREATE DEDICATED USER
-#=================================================
-#REMOVEME? ynh_script_progression --message="Configuring system user..." --weight=1
-
-# Create a system user
-#REMOVEME? ynh_system_user_create --username=$app --home_dir="$install_dir"
-
-#=================================================
-# CREATE A MYSQL DATABASE
-#=================================================
-#REMOVEME? ynh_script_progression --message="Creating a MySQL database..." --weight=2
-
-#REMOVEME? db_name=$(ynh_sanitize_dbid --db_name=$app)
-#REMOVEME? db_user=$db_name
-#REMOVEME? ynh_app_setting_set --app=$app --key=db_name --value=$db_name
-#REMOVEME? ynh_mysql_setup_db --db_user=$db_user --db_name=$db_name
-
 #=================================================
 # DOWNLOAD, CHECK AND UNPACK SOURCE
 #=================================================
 ynh_script_progression --message="Setting up source files..." --weight=3
 
-#REMOVEME? ynh_app_setting_set --app=$app --key=install_dir --value=$install_dir
 # Download, check integrity, uncompress and patch the source from app.src
 ynh_setup_source --dest_dir="$install_dir"
 mv $install_dir/Upload/* $install_dir/
-#REMOVEME? ynh_secure_remove --file="$install_dir/Documentation"
+ynh_secure_remove --file="$install_dir/Documentation"
-#REMOVEME? ynh_secure_remove --file="$install_dir/Upload"
+nh_secure_remove --file="$install_dir/Upload"
 
 chmod 750 "$install_dir"
 chmod -R o-rwx "$install_dir"
@@ -98,8 +32,7 @@ chmod 775 $install_dir/cache/ $install_dir/cache/themes/ $install_dir/uploads/ $
 ynh_script_progression --message="Configuring PHP-FPM..." --weight=3
 
 # Create a dedicated PHP-FPM config
-ynh_add_fpm_config
+ynh_add_fpm_config --usage=low --footprint=low
-#REMOVEME? phpversion=$(ynh_app_setting_get --app=$app --key=phpversion)
 
 #=================================================
 # NGINX CONFIGURATION
@@ -109,54 +42,6 @@ ynh_script_progression --message="Configuring NGINX web server..." --weight=2
 # Create a dedicated NGINX config
 ynh_add_nginx_config
 
-#=================================================
-# ADD A CONFIGURATION
-#=================================================
-# ynh_script_progression --message="Adding a configuration file..." --weight=1
-
-# ynh_add_config --template="../conf/config.php" --destination="$install_dir/inc/config.php"
-
-# chmod 400 "$install_dir/inc/config.php"
-# chown $app:$app "$install_dir/inc/config.php"
-
-#=================================================
-# SETUP SSOWAT
-#=================================================
-#REMOVEME? ynh_script_progression --message="Configuring permissions..." --weight=1
-
-# Make app public if necessary
-#REMOVEME? if [ $is_public -eq 1 ]
-then
-#REMOVEME? 	ynh_permission_update --permission="main" --add="visitors"
-fi
-
-#=================================================
-# RELOAD NGINX
-#=================================================
-#REMOVEME? ynh_script_progression --message="Reloading NGINX web server..." --weight=1
-
-#REMOVEME? ynh_systemd_action --service_name=nginx --action=reload
-
-#=================================================
-# SEND A README FOR THE ADMIN
-#=================================================
-ynh_script_progression --message="Sending a readme for the admin..." --weight=1
-
-message="MyBB was successfully installed :)
-
-Please open your $app domain: https://$domain$path
-
-Complete the registration process from the setup page displayed.
-Details for MySQL database to be enterted while registration process:
-
-Database login:    $app
-Database name:     $app
-Database password: $db_pwd
-
-If you are facing any problem or want to improve this app, please open a new issue here: https://github.com/YunoHost-Apps/mybb_ynh/issues"
-
-ynh_send_readme_to_admin "$message"
-
 #=================================================
 # END OF SCRIPT
 #=================================================

scripts/remove

@@ -9,34 +9,6 @@
 source _common.sh
 source /usr/share/yunohost/helpers
 
-#=================================================
-# LOAD SETTINGS
-#=================================================
-#REMOVEME? ynh_script_progression --message="Loading installation settings..." --weight=1
-
-#REMOVEME? app=$YNH_APP_INSTANCE_NAME
-
-#REMOVEME? domain=$(ynh_app_setting_get --app=$app --key=domain)
-#REMOVEME? db_name=$(ynh_app_setting_get --app=$app --key=db_name)
-#REMOVEME? db_user=$db_name
-#REMOVEME? #REMOVEME? install_dir=$(ynh_app_setting_get --app=$app --key=install_dir)
-
-#=================================================
-# REMOVE THE MYSQL DATABASE
-#=================================================
-#REMOVEME? ynh_script_progression --message="Removing the MySQL database..." --weight=2
-
-# Remove a database if it exists, along with the associated user
-#REMOVEME? ynh_mysql_remove_db --db_user=$db_user --db_name=$db_name
-
-#=================================================
-# REMOVE APP MAIN DIR
-#=================================================
-#REMOVEME? ynh_script_progression --message="Removing app main directory..." --weight=3
-
-# Remove the app directory securely
-#REMOVEME? ynh_secure_remove --file="$install_dir"
-
 #=================================================
 # REMOVE NGINX CONFIGURATION
 #=================================================
@@ -53,24 +25,6 @@ ynh_script_progression --message="Removing PHP-FPM configuration..." --weight=1
 # Remove the dedicated PHP-FPM config
 ynh_remove_fpm_config
 
-#=================================================
-# REMOVE DEPENDENCIES
-#=================================================
-#REMOVEME? ynh_script_progression --message="Removing dependencies..." --weight=2
-
-# Remove metapackage and its dependencies
-#REMOVEME? ynh_remove_app_dependencies
-
-#=================================================
-# GENERIC FINALIZATION
-#=================================================
-# REMOVE DEDICATED USER
-#=================================================
-#REMOVEME? ynh_script_progression --message="Removing the dedicated system user..." --weight=1
-
-# Delete a system user
-#REMOVEME? ynh_system_user_delete --username=$app
-
 #=================================================
 # END OF SCRIPT
 #=================================================

scripts/restore

@@ -10,49 +10,6 @@
 source ../settings/scripts/_common.sh
 source /usr/share/yunohost/helpers
 
-#=================================================
-# MANAGE SCRIPT FAILURE
-#=================================================
-
-#REMOVEME? ynh_clean_setup () {
-	#### Remove this function if there's nothing to clean before calling the remove script.
-	true
-}
-# Exit if an error occurs during the execution of the script
-#REMOVEME? ynh_abort_if_errors
-
-#=================================================
-# LOAD SETTINGS
-#=================================================
-#REMOVEME? ynh_script_progression --message="Loading installation settings..." --weight=1
-
-#REMOVEME? app=$YNH_APP_INSTANCE_NAME
-
-#REMOVEME? domain=$(ynh_app_setting_get --app=$app --key=domain)
-#REMOVEME? path=$(ynh_app_setting_get --app=$app --key=path)
-#REMOVEME? #REMOVEME? install_dir=$(ynh_app_setting_get --app=$app --key=install_dir)
-#REMOVEME? db_name=$(ynh_app_setting_get --app=$app --key=db_name)
-#REMOVEME? db_user=$db_name
-#REMOVEME? phpversion=$(ynh_app_setting_get --app=$app --key=phpversion)
-
-#=================================================
-# CHECK IF THE APP CAN BE RESTORED
-#=================================================
-#REMOVEME? ynh_script_progression --message="Validating restoration parameters..." --weight=1
-
-#REMOVEME? test ! -d $install_dir \
-	|| ynh_die --message="There is already a directory: $install_dir "
-
-#=================================================
-# STANDARD RESTORATION STEPS
-#=================================================
-# RECREATE THE DEDICATED USER
-#=================================================
-#REMOVEME? ynh_script_progression --message="Recreating the dedicated system user..." --weight=1
-
-# Create the dedicated user (if not existing)
-#REMOVEME? ynh_system_user_create --username=$app --home_dir="$install_dir"
-
 #=================================================
 # RESTORE THE APP MAIN DIR
 #=================================================
@@ -60,18 +17,9 @@ ynh_script_progression --message="Restoring the app main directory..." --weight=
 
 ynh_restore_file --origin_path="$install_dir"
 
-chmod 750 "$install_dir"
 chmod -R o-rwx "$install_dir"
 chown -R $app:www-data "$install_dir"
 
-#=================================================
-# REINSTALL DEPENDENCIES
-#=================================================
-#REMOVEME? ynh_script_progression --message="Reinstalling dependencies..." --weight=1
-
-# Define and install dependencies
-#REMOVEME? ynh_install_app_dependencies $pkg_dependencies
-
 #=================================================
 # RESTORE THE PHP-FPM CONFIGURATION
 #=================================================
@@ -89,10 +37,8 @@ ynh_restore_file --origin_path="/etc/nginx/conf.d/$domain.d/$app.conf"
 #=================================================
 # RESTORE THE MYSQL DATABASE
 #=================================================
-#REMOVEME? ynh_script_progression --message="Restoring the MySQL database..." --weight=1
+ynh_script_progression --message="Restoring the MySQL database..." --weight=1
 
-#REMOVEME? db_pwd=$(ynh_app_setting_get --app=$app --key=mysqlpwd)
-#REMOVEME? ynh_mysql_setup_db --db_user=$db_user --db_name=$db_name --db_pwd=$db_pwd
 ynh_mysql_connect_as --user=$db_user --password=$db_pwd --database=$db_name < ./db.sql
 
 #=================================================

scripts/upgrade

@@ -9,52 +9,12 @@
 source _common.sh
 source /usr/share/yunohost/helpers
 
-#=================================================
-# LOAD SETTINGS
-#=================================================
-#REMOVEME? ynh_script_progression --message="Loading installation settings..." --weight=1
-
-#REMOVEME? app=$YNH_APP_INSTANCE_NAME
-
-#REMOVEME? domain=$(ynh_app_setting_get --app=$app --key=domain)
-#REMOVEME? path=$(ynh_app_setting_get --app=$app --key=path)
-#REMOVEME? #REMOVEME? install_dir=$(ynh_app_setting_get --app=$app --key=install_dir)
-#REMOVEME? db_name=$(ynh_app_setting_get --app=$app --key=db_name)
-#REMOVEME? db_user=$db_name
-#REMOVEME? db_pwd=$(ynh_app_setting_get --app=$app --key=mysqlpwd)
-
 #=================================================
 # CHECK VERSION
 #=================================================
 
 upgrade_type=$(ynh_check_app_version_changed)
 
-#=================================================
-# BACKUP BEFORE UPGRADE THEN ACTIVE TRAP
-#=================================================
-#REMOVEME? ynh_script_progression --message="Backing up the app before upgrading (may take a while)..." --weight=1
-
-# Backup the current version of the app
-#REMOVEME? ynh_backup_before_upgrade
-#REMOVEME? ynh_clean_setup () {
-	# Restore it if the upgrade fails
-#REMOVEME? 	ynh_restore_upgradebackup
-}
-# Exit if an error occurs during the execution of the script
-#REMOVEME? ynh_abort_if_errors
-
-#=================================================
-# ENSURE DOWNWARD COMPATIBILITY
-#=================================================
-ynh_script_progression --message="Ensuring downward compatibility..." --weight=1
-
-# Cleaning legacy permissions
-#REMOVEME? if ynh_legacy_permissions_exists; then
-#REMOVEME? 	ynh_legacy_permissions_delete_all
-
-	ynh_app_setting_delete --app=$app --key=is_public
-fi
-
 #=================================================
 # CREATE DEDICATED USER
 #=================================================
@@ -75,37 +35,20 @@ then
 	ynh_setup_source --dest_dir="$install_dir" --keep="inc/config.php"
 
 	#This removes the lock to do the post upgrade process.
-#REMOVEME? 	#ynh_secure_remove --file="$install_dir/install/lock"
+	#ynh_secure_remove --file="$install_dir/install/lock"
 fi
 
 chmod 750 "$install_dir"
 chmod -R o-rwx "$install_dir"
 chown -R $app:www-data "$install_dir"
 
-#=================================================
-# ADD A CONFIGURATION
-#=================================================
-# ynh_script_progression --message="Adding a configuration file..." --weight=1
-
-# ynh_add_config --template="../conf/config.php" --destination="$install_dir/inc/config.php"
-
-# chmod 666 "$install_dir/inc/config.php"
-# chown $app:$app "$install_dir/inc/config.php"
-
-#=================================================
-# UPGRADE DEPENDENCIES
-#=================================================
-#REMOVEME? ynh_script_progression --message="Upgrading dependencies..." --weight=2
-
-#REMOVEME? ynh_install_app_dependencies $pkg_dependencies
-
 #=================================================
 # PHP-FPM CONFIGURATION
 #=================================================
 ynh_script_progression --message="Upgrading PHP-FPM configuration..." --weight=1
 
 # Create a dedicated PHP-FPM config
-ynh_add_fpm_config
+ynh_add_fpm_config --usage=low --footprint=low
 
 #=================================================
 # NGINX CONFIGURATION
@@ -115,13 +58,6 @@ ynh_script_progression --message="Upgrading NGINX web server configuration..." -
 # Create a dedicated NGINX config
 ynh_add_nginx_config
 
-#=================================================
-# RELOAD NGINX
-#=================================================
-#REMOVEME? ynh_script_progression --message="Reloading NGINX web server..." --weight=1
-
-#REMOVEME? ynh_systemd_action --service_name=nginx --action=reload
-
 #=================================================
 # END OF SCRIPT
 #=================================================

tests.toml

@@ -0,0 +1,5 @@
+test_format = 1.0
+
+[default]
+
+    test_upgrade_from.8c280b69.name = "Upgrade from #2"