diff --git a/README.md b/README.md index 6fc7650..c355e88 100644 --- a/README.md +++ b/README.md @@ -17,7 +17,7 @@ If you don't have YunoHost, please consult [the guide](https://yunohost.org/#/in Online storage, file sharing platform and various other applications -**Shipped version:** 25.0.1~ynh1 +**Shipped version:** 25.0.2~ynh2 **Demo:** https://demo.nextcloud.com/ @@ -29,16 +29,23 @@ Online storage, file sharing platform and various other applications ## Configuration -#### Configure OnlyOffice integration +### Configure ONLYOFFICE integration -Starting from Nextcloud 18, it features a direct integration of OnlyOffice (an online rich text document editor) through a Nextcloud app. +#### With Nextcloud App (no ARM support, lower performance) + +Starting from Nextcloud 18, it features a direct integration of ONLYOFFICE (an online rich text document editor) through a Nextcloud app. To install and configure it: -- Install *Community Document Server* application in your Nextcloud. That's the part that runs OnlyOffice server. -- Install *ONLYOFFICE* application. That's the client part that will connect to an OnlyOffice server. -- Then in Settings -> ONLYOFFICE (`https://yourdomain.tld/nextcloud/settings/admin/onlyoffice`), if you want to configure which file formats should be opened by OnlyOffice. +- Install *Community Document Server* application in your Nextcloud. That's the part that runs ONLYOFFICE server. +- Install *ONLYOFFICE* application. That's the client part that will connect to an ONLYOFFICE server. +- Then in Settings -> ONLYOFFICE (`https://yourdomain.tld/nextcloud/settings/admin/onlyoffice`), if you want to configure which file formats should be opened by ONLYOFFICE. - Here you go :) You should be able to create new type of documents and open them. -*NB: OnlyOffice is only available for x86 architecture - **ARM** architecture is **not** supported (Raspberry Pi, OLinuXino...)* +*NB: ONLYOFFICE Nextcloud App is only available for x86 architecture - for **ARM** architecture (Raspberry Pi, OLinuXino...), consider the YunoHost App below* + +#### With YunoHost App (ARM64 support, better performance) + +For better performance and ARM64 support, install ONLYOFFICE YunoHost App and connect it to Nextcloud, see the tutorial in the [doc of onlyoffice_ynh package](https://github.com/YunoHost-Apps/onlyoffice_ynh/blob/master/README_fr.md#configuration-de-onlyoffice-server) + ## YunoHost specific features diff --git a/README_fr.md b/README_fr.md index e441d52..d79263d 100644 --- a/README_fr.md +++ b/README_fr.md @@ -17,7 +17,7 @@ Si vous n'avez pas YunoHost, regardez [ici](https://yunohost.org/#/install) pour Stockage en ligne, plateforme de partage de fichiers et diverses autres applications -**Version incluse :** 25.0.1~ynh1 +**Version incluse :** 25.0.2~ynh2 **Démo :** https://demo.nextcloud.com/ @@ -29,16 +29,23 @@ Stockage en ligne, plateforme de partage de fichiers et diverses autres applicat ## Configuration -#### Configurer l'intégration d'OnlyOffice +### Configurer l'intégration d'ONLYOFFICE -À partir de sa version 18, Nextcloud inclut une intégration directe de OnlyOffice (un éditeur de texte enrichi en ligne) via une application Nextcloud. +#### Avec l'application Nextcloud (pas de support ARM, performances limitées) + +À partir de sa version 18, Nextcloud inclut une intégration directe de ONLYOFFICE (un éditeur de texte enrichi en ligne) via une application Nextcloud. Pour l'installer et la configurer : -- Installez l'application *Community Document Server* dans votre Nextcloud. C'est la partie qui fait tourner un serveur OnlyOffice. -- Installez l'application *ONLYOFFICE*. C'est la partie cliente qui va se connecter au serveur OnlyOffice. -- Ensuite dans les Paramètres -> ONLYOFFICE (`https://yourdomain.tld/nextcloud/settings/admin/onlyoffice`), si vous voulez configurer quels formats de fichier s'ouvrent avec OnlyOffice. +- Installez l'application *Community Document Server* dans votre Nextcloud. C'est la partie qui fait tourner un serveur ONLYOFFICE. +- Installez l'application *ONLYOFFICE*. C'est la partie cliente qui va se connecter au serveur ONLYOFFICE. +- Ensuite dans les Paramètres -> ONLYOFFICE (`https://yourdomain.tld/nextcloud/settings/admin/onlyoffice`), si vous voulez configurer quels formats de fichier s'ouvrent avec ONLYOFFICE. - Et voilà :) Vous devriez pouvoir créer de nouveaux types de documents, et les ouvrir. - -*NB : OnlyOffice n'est disponible que sous architecture x86 - L'architecture **ARM** n'est **pas** supporté (Raspberry Pi, OLinuXino...)* + +*NB : l'app Nextcloud ONLYOFFICE Community Document Server n'est disponible que sous architecture x86 - Pour un support de l'architecture **ARM** (Raspberry Pi, OLinuXino...), installez plutôt l'App YunoHost, voir ci-dessous* + +#### Avec l'application YunoHost (support ARM64, meilleures performances) + +Pour de meilleures performances et le support de ARM64, installez l'app YunoHost ONLYOFFICE, voir le tutoriel dans la [doc du paquet onlyoffice_ynh](https://github.com/YunoHost-Apps/onlyoffice_ynh/blob/master/README_fr.md#configuration-de-onlyoffice-server) + ## Caractéristiques spécifiques YunoHost diff --git a/doc/DISCLAIMER.md b/doc/DISCLAIMER.md index ff9f640..0a73710 100644 --- a/doc/DISCLAIMER.md +++ b/doc/DISCLAIMER.md @@ -1,15 +1,22 @@ ## Configuration -#### Configure OnlyOffice integration +### Configure ONLYOFFICE integration -Starting from Nextcloud 18, it features a direct integration of OnlyOffice (an online rich text document editor) through a Nextcloud app. +#### With Nextcloud App (no ARM support, lower performance) + +Starting from Nextcloud 18, it features a direct integration of ONLYOFFICE (an online rich text document editor) through a Nextcloud app. To install and configure it: -- Install *Community Document Server* application in your Nextcloud. That's the part that runs OnlyOffice server. -- Install *ONLYOFFICE* application. That's the client part that will connect to an OnlyOffice server. -- Then in Settings -> ONLYOFFICE (`https://yourdomain.tld/nextcloud/settings/admin/onlyoffice`), if you want to configure which file formats should be opened by OnlyOffice. +- Install *Community Document Server* application in your Nextcloud. That's the part that runs ONLYOFFICE server. +- Install *ONLYOFFICE* application. That's the client part that will connect to an ONLYOFFICE server. +- Then in Settings -> ONLYOFFICE (`https://yourdomain.tld/nextcloud/settings/admin/onlyoffice`), if you want to configure which file formats should be opened by ONLYOFFICE. - Here you go :) You should be able to create new type of documents and open them. -*NB: OnlyOffice is only available for x86 architecture - **ARM** architecture is **not** supported (Raspberry Pi, OLinuXino...)* +*NB: ONLYOFFICE Nextcloud App is only available for x86 architecture - for **ARM** architecture (Raspberry Pi, OLinuXino...), consider the YunoHost App below* + +#### With YunoHost App (ARM64 support, better performance) + +For better performance and ARM64 support, install ONLYOFFICE YunoHost App and connect it to Nextcloud, see the tutorial in the [doc of onlyoffice_ynh package](https://github.com/YunoHost-Apps/onlyoffice_ynh/blob/master/README_fr.md#configuration-de-onlyoffice-server) + ## YunoHost specific features diff --git a/doc/DISCLAIMER_fr.md b/doc/DISCLAIMER_fr.md index aacdc22..343894c 100644 --- a/doc/DISCLAIMER_fr.md +++ b/doc/DISCLAIMER_fr.md @@ -1,15 +1,22 @@ ## Configuration -#### Configurer l'intégration d'OnlyOffice +### Configurer l'intégration d'ONLYOFFICE -À partir de sa version 18, Nextcloud inclut une intégration directe de OnlyOffice (un éditeur de texte enrichi en ligne) via une application Nextcloud. +#### Avec l'application Nextcloud (pas de support ARM, performances limitées) + +À partir de sa version 18, Nextcloud inclut une intégration directe de ONLYOFFICE (un éditeur de texte enrichi en ligne) via une application Nextcloud. Pour l'installer et la configurer : -- Installez l'application *Community Document Server* dans votre Nextcloud. C'est la partie qui fait tourner un serveur OnlyOffice. -- Installez l'application *ONLYOFFICE*. C'est la partie cliente qui va se connecter au serveur OnlyOffice. -- Ensuite dans les Paramètres -> ONLYOFFICE (`https://yourdomain.tld/nextcloud/settings/admin/onlyoffice`), si vous voulez configurer quels formats de fichier s'ouvrent avec OnlyOffice. +- Installez l'application *Community Document Server* dans votre Nextcloud. C'est la partie qui fait tourner un serveur ONLYOFFICE. +- Installez l'application *ONLYOFFICE*. C'est la partie cliente qui va se connecter au serveur ONLYOFFICE. +- Ensuite dans les Paramètres -> ONLYOFFICE (`https://yourdomain.tld/nextcloud/settings/admin/onlyoffice`), si vous voulez configurer quels formats de fichier s'ouvrent avec ONLYOFFICE. - Et voilà :) Vous devriez pouvoir créer de nouveaux types de documents, et les ouvrir. - -*NB : OnlyOffice n'est disponible que sous architecture x86 - L'architecture **ARM** n'est **pas** supporté (Raspberry Pi, OLinuXino...)* + +*NB : l'app Nextcloud ONLYOFFICE Community Document Server n'est disponible que sous architecture x86 - Pour un support de l'architecture **ARM** (Raspberry Pi, OLinuXino...), installez plutôt l'App YunoHost, voir ci-dessous* + +#### Avec l'application YunoHost (support ARM64, meilleures performances) + +Pour de meilleures performances et le support de ARM64, installez l'app YunoHost ONLYOFFICE, voir le tutoriel dans la [doc du paquet onlyoffice_ynh](https://github.com/YunoHost-Apps/onlyoffice_ynh/blob/master/README_fr.md#configuration-de-onlyoffice-server) + ## Caractéristiques spécifiques YunoHost diff --git a/manifest.json b/manifest.json index 799055d..f806298 100644 --- a/manifest.json +++ b/manifest.json @@ -6,7 +6,7 @@ "en": "Online storage, file sharing platform and various other applications", "fr": "Stockage en ligne, plateforme de partage de fichiers et diverses autres applications" }, - "version": "25.0.1~ynh1", + "version": "25.0.2~ynh2", "url": "https://nextcloud.com", "upstream": { "license": "AGPL-3.0", diff --git a/scripts/install b/scripts/install index 11d1c5d..5439228 100755 --- a/scripts/install +++ b/scripts/install @@ -40,10 +40,10 @@ test ! -e "$final_path" || ynh_die --message="This path already contains a folde # Register (book) web path ynh_webpath_register --app=$app --domain=$domain --path_url=$path_url -# Check machine architecture (Seens 25.0 Nextcloud doesn't support 32bit machines) -if [ $YNH_ARCH == "i386" ]; +# Check machine architecture (26.0 Nextcloud version will drop support for 32bit architectures) +if [ $YNH_ARCH == "i386" ] || [ $YNH_ARCH == "armhf" ] then - ynh_die --message="Sorry, Nextcloud has deprecated 32-bit support" + ynh_print_warn --message="Nextcloud has deprecated 32-bit support. Version 25 is the last one to support 32-bit architectures." fi #================================================= diff --git a/scripts/upgrade b/scripts/upgrade index 7497100..f9622ec 100755 --- a/scripts/upgrade +++ b/scripts/upgrade @@ -34,10 +34,10 @@ fpm_usage=$(ynh_app_setting_get --app=$app --key=fpm_usage) upgrade_type=$(ynh_check_app_version_changed) -# Check machine architecture (Seens 25.0 Nextcloud doesn't support 32bit machines) -if [ $YNH_ARCH == "i386" ]; +# Check machine architecture (26.0 Nextcloud version will drop support for 32bit architectures) +if [ $YNH_ARCH == "i386" ] || [ $YNH_ARCH == "armhf" ] then - ynh_die --message="Sorry, Nextcloud has deprecated 32-bit support" + ynh_print_warn --message="Nextcloud has deprecated 32-bit support. Version 25 is the last one to support 32-bit architectures." fi #================================================= diff --git a/scripts/upgrade.d/upgrade.last.sh b/scripts/upgrade.d/upgrade.last.sh index 4b026f4..2c5bafd 100644 --- a/scripts/upgrade.d/upgrade.last.sh +++ b/scripts/upgrade.d/upgrade.last.sh @@ -1,7 +1,7 @@ #!/bin/bash # Last available Nextcloud version -next_version="25.0.1" +next_version="25.0.2" # Nextcloud tarball checksum sha256 -nextcloud_source_sha256="72d4076924caf19139c40178597af6211799e20440ce196fb43b9c4e47d77515" +nextcloud_source_sha256="d6ab40faa108937bda42395f570ff111f4c97343b55be1420024da3177e37d59"