Add templates

.github/ISSUE_TEMPLATE.md

@@ -0,0 +1,55 @@
+---
+name: Bug report
+about: When creating a bug report, please use the following template to provide all the relevant information and help debugging efficiently.
+
+---
+
+**How to post a meaningful bug report**
+1. *Read this whole template first.*
+2. *Determine if you are on the right place:*
+   - *If you were performing an action on the app from the webadmin or the CLI (install, update, backup, restore, change_url...), you are on the right place!*
+   - *Otherwise, the issue may be due to the app itself. Refer to its documentation or repository for help.*
+   - *When in doubt, post here and we will figure it out together.*
+3. *Delete the italic comments as you write over them below, and remove this guide.*
+--- 
+
+### Describe the bug
+
+*A clear and concise description of what the bug is.*
+
+### Context
+
+- Hardware: *VPS bought online / Old laptop or computer / Raspberry Pi at home / Internet Cube with VPN / Other ARM board / ...*
+- YunoHost version: x.x.x
+- I have access to my server: *Through SSH | through the webadmin | direct access via keyboard / screen | ...*
+- Are you in a special context or did you perform some particular tweaking on your YunoHost instance?: *no / yes*
+  - If yes, please explain:
+- Using, or trying to install package version/branch:
+- If upgrading, current package version: *can be found in the admin, or with `yunohost app info $app_id`*
+
+### Steps to reproduce
+
+- *If you performed a command from the CLI, the command itself is enough. For example:*
+    ```sh
+    sudo yunohost app install the_app
+    ```
+- *If you used the webadmin, please perform the equivalent command from the CLI first.*
+- *If the error occurs in your browser, explain what you did:*
+   1. *Go to '...'*
+   2. *Click on '...'*
+   3. *Scroll down to '...'*
+   4. *See error*
+
+### Expected behavior
+
+*A clear and concise description of what you expected to happen. You can remove this section if the command above is enough to understand your intent.*
+
+### Logs
+
+*When an operation fails, YunoHost provides a simple way to share the logs.*
+- *In the webadmin, the error message contains a link to the relevant log page. On that page, you will be able to 'Share with Yunopaste'. If you missed it, the logs of previous operations are also available under Tools > Logs.*
+- *In command line, the command to share the logs is displayed at the end of the operation and looks like `yunohost log display [log name] --share`. If you missed it, you can find the log ID of a previous operation using `yunohost log list`.*
+
+*After sharing the log, please copypaste directly the link provided by YunoHost (to help readability, no need to copypaste the entire content of the log here, just the link is enough...)*
+
+*If applicable and useful, add screenshots to help explain your problem.*

.github/PULL_REQUEST_TEMPLATE.md

@@ -0,0 +1,16 @@
+## Problem
+
+- *Description of why you made this PR*
+
+## Solution
+
+- *And how do you fix that problem*
+
+## PR Status
+
+- [ ] Code finished and ready to be reviewed/tested
+- [ ] The fix/enhancement were manually tested (if applicable)
+
+## Automatic tests
+
+Automatic tests can be triggered on https://ci-apps-dev.yunohost.org/ *after creating the PR*, by commenting "!testme", "!gogogadgetoci" or "By the power of systemd, I invoke The Great App CI to test this Pull Request!". (N.B. : for this to work you need to be a member of the Yunohost-Apps organization)

doc/DISCLAIMER.md

@@ -0,0 +1,23 @@
+## Configuration
+
+#### Configure OnlyOffice integration
+
+Starting from Nextcloud 18, it features a direct integration of OnlyOffice (an online rich text document editor) through a Nextcloud app.
+To install and configure it:
+- Install *Community Document Server* application in your Nextcloud. That's the part that runs OnlyOffice server.
+- Install *ONLYOFFICE* application. That's the client part that will connect to an OnlyOffice server.
+- Then in Settings -> ONLYOFFICE (`https://yourdomain.tld/nextcloud/settings/admin/onlyoffice`), if you want to configure which file formats should be opened by OnlyOffice.
+- Here you go :) You should be able to create new type of documents and open them.
+
+*NB: OnlyOffice is only available for x86 architecture - **ARM** architecture is **not** supported (Raspberry Pi, OLinuXino...)*
+
+## YunoHost specific features
+
+In addition to Nextcloud core features, the following are made available with
+this package:
+
+ * Integrate with YunoHost users and SSO - i.e. logout button
+ * Allow one user to be the administrator (set at the installation)
+ * Allow multiple instances of this application
+ * Optionally access the user home folder from Nextcloud files (set at the installation, the sharing is enabled by default)
+ * Serve `/.well-known` paths for CalDAV and CardDAV on the domain only if it's not already served - i.e. by Baïkal

doc/DISCLAIMER_fr.md

@@ -0,0 +1,22 @@
+## Configuration
+
+#### Configurer l'intégration d'OnlyOffice
+
+À partir de sa version 18, Nextcloud inclut une intégration directe de OnlyOffice (un éditeur de texte enrichi en ligne) via une application Nextcloud.
+Pour l'installer et la configurer :
+- Installez l'application *Community Document Server* dans votre Nextcloud. C'est la partie qui fait tourner un serveur OnlyOffice.
+- Installez l'application *ONLYOFFICE*. C'est la partie cliente qui va se connecter au serveur OnlyOffice.
+- Ensuite dans les Paramètres -> ONLYOFFICE (`https://yourdomain.tld/nextcloud/settings/admin/onlyoffice`), si vous voulez configurer quels formats de fichier s'ouvrent avec OnlyOffice.
+- Et voilà :) Vous devriez pouvoir créer de nouveaux types de documents, et les ouvrir.
+    
+*NB : OnlyOffice n'est disponible que sous architecture x86 - L'architecture **ARM** n'est **pas** supporté (Raspberry Pi, OLinuXino...)*
+
+## Caractéristiques spécifiques YunoHost
+
+En plus des fonctionnalités principales de Nextcloud, les fonctionnalités suivantes sont incluses dans ce package :
+
+ * Intégration avec les utilisateurs YunoHost et le SSO - exemple, le bouton de déconnexion
+ * Permet à un utilisateur d'être l'administrateur (choisi à l'installation)
+ * Permet de multiples instances de cette application
+ * Accès optionnel au répertoire home depuis les fichiers Nextcloud (à activer à l'installation, le partage étant activé par défaut)
+ * Utilise l'adresse `/.well-known` pour la synchronisation CalDAV et CardDAV du domaine si aucun autre service ne l'utilise déjà - par exemple, baikal

manifest.json

@@ -8,6 +8,14 @@
     },
     "version": "21.0.2~ynh1",
     "url": "https://nextcloud.com",
+    "upstream": {
+        "license": "AGPL-3.0",
+        "website": "https://nextcloud.com",
+        "demo": "https://demo.nextcloud.com/",
+        "admindoc": "https://docs.nextcloud.com/server/21/user_manual/en/",
+        "userdoc": "https://yunohost.org/en/app_nextcloud",
+        "code": "https://github.com/nextcloud/server"
+    },
     "license": "AGPL-3.0",
     "maintainer": {
         "name": "Kay0u",

pull_request_template.md

@@ -1,24 +0,0 @@
-## Problem
-- *Description of why you made this PR*
-
-## Solution
-- *And how you fix that*
-
-## PR Status
-- [ ] Code finished.
-- [ ] Tested with Package_check.
-- [ ] Fix or enhancement tested.
-- [ ] Upgrade from last version tested.
-- [ ] Can be reviewed and tested.
-
-## Validation
----
-*Minor decision*
-- **Upgrade previous version** : 
-- [ ] **Code review** : 
-- [ ] **Approval (LGTM)** : 
-- [ ] **Approval (LGTM)** : 
-
-## Package_check results
----
-* An automatic package_check will be launch at https://ci-apps-dev.yunohost.org/, when you add a specific comment to your Pull Request: "!testme", "!gogogadgetoci" or "By the power of systemd, I invoke The Great App CI to test this Pull Request!"*