Merge pull request #655 from YunoHost-Apps/testing

Testing

README.md

@@ -29,7 +29,7 @@ In addition to Nextcloud core features, the following are made available with th
  * Serve `/.well-known` paths for CalDAV and CardDAV on the domain only if it's not already served - i.e. by Baïkal
 
 
-**Shipped version:** 28.0.1~ynh1
+**Shipped version:** 28.0.1~ynh2
 
 **Demo:** https://demo.nextcloud.com/
 

README_fr.md

@@ -29,7 +29,7 @@ En plus des fonctionnalités principales de Nextcloud, les fonctionnalités suiv
  * Utilise l'adresse `/.well-known` pour la synchronisation CalDAV et CardDAV du domaine si aucun autre service ne l'utilise déjà - par exemple, Baïkal
 
 
-**Version incluse :** 28.0.1~ynh1
+**Version incluse :** 28.0.1~ynh2
 
 **Démo :** https://demo.nextcloud.com/
 

doc/ADMIN.md

@@ -3,7 +3,7 @@
 You can run Nextcloud commands from the command line using:
 
 ```
-sudo -u __APP__ php__YNH_PHP_VERSION__ --define apc.enable_cli=1 __INSTALL_DIR__/occ ...
+sudo -u __APP__ php__PHPVERSION__ --define apc.enable_cli=1 __INSTALL_DIR__/occ ...
 ```
 
 Alternatively, you may open a 'Nextcloud shell' with `sudo yunohost app shell __APP__`, then run `php occ ...`

doc/ADMIN_fr.md

@@ -3,7 +3,7 @@
 Vous pouvez lancer des commandes Nextcloud depuis la ligne de commande avec:
 
 ```
-sudo -u __APP__ php__YNH_PHP_VERSION__ --define apc.enable_cli=1 __INSTALL_DIR__/occ ...
+sudo -u __APP__ php__PHPVERSION__ --define apc.enable_cli=1 __INSTALL_DIR__/occ ...
 ```
 
 Ou bien, vous pouvez ouvrir un "shell Nextcloud" avec `sudo yunohost app shell __APP__`, puis lancer `php occ ...`

doc/PRE_UPGRADE.md

@@ -0,0 +1,3 @@
+If you are upgrading to a new major version of Nextcloud, please make sure that your Nextcloud apps are up to date from Nextcloud's administration panel beforehand.
+
+Additionally, if you installed specific Nextcloud apps, we recommend making sure that they are compatible with the new major version. YunoHost will attempt to check this automatically at the very beginning of the upgrade, but a manual check doesn't hurt either. For Nextcloud 28, this forum thread might be helpful : <https://help.nextcloud.com/t/apps-not-compatible-with-nc-28/176234>.

manifest.toml

@@ -5,7 +5,7 @@ name = "Nextcloud"
 description.en = "Online storage, file sharing platform and various other applications"
 description.fr = "Stockage en ligne, plateforme de partage de fichiers et diverses autres applications"
 
-version = "28.0.1~ynh1"
+version = "28.0.1~ynh2"
 
 maintainers = ["kay0u"]
 
@@ -27,8 +27,8 @@ ldap = true
 
 sso = true
 
-disk = "50M"
+disk = "650M"
-ram.build = "500M"
+ram.build = "250M"
 ram.runtime = "512M"
 
 [install]
@@ -55,6 +55,38 @@ ram.runtime = "512M"
     default = false
 
 [resources]
+
+    [resources.sources]
+
+        [resources.sources.main]
+        url = 'https://download.nextcloud.com/server/releases/nextcloud-28.0.1.tar.bz2'
+        sha256 = '2f80735b443082272fe6a3b5e32137957f1fc448c75342b94b5200b29725f3a4'
+
+        [resources.sources.27]
+        url = 'https://download.nextcloud.com/server/releases/nextcloud-27.0.0.tar.bz2'
+        sha256 = '3d312a09b9345ac058758dd7b4059bf3cf0b1f0f1d747251b6fac3585ba6533f'
+        prefetch = false
+
+        [resources.sources.26]
+        url = 'https://download.nextcloud.com/server/releases/nextcloud-26.0.0.tar.bz2'
+        sha256 = 'f163150363aee9366ecb5cd5259bf6756ed4f073cea78b5fa515cada7a0d0c3d'
+        prefetch = false
+
+        [resources.sources.25]
+        url = 'https://download.nextcloud.com/server/releases/nextcloud-25.0.0.tar.bz2'
+        sha256 = '2c05ac9d7b72b44ef8b3d2ae03ff0fd6121e254b8054556f5163bd8760dd8f49'
+        prefetch = false
+
+        [resources.sources.24]
+        url = 'https://download.nextcloud.com/server/releases/nextcloud-24.0.0.tar.bz2'
+        sha256 = '176cb5620f20465fb4759bdf3caaebeb7acff39d6c8630351af9f8738c173780'
+        prefetch = false
+
+        [resources.sources.23]
+        url = 'https://download.nextcloud.com/server/releases/nextcloud-23.0.0.tar.bz2'
+        sha256 = 'c37592abc3b65c8fd28459281a24f414b87af52fc8c2ea979be3f9be75d01a2c'
+        prefetch = false
+
     [resources.system_user]
     allow_email = true
 
@@ -77,4 +109,4 @@ ram.runtime = "512M"
 
     [resources.database]
     type = "mysql"
-    
+    

scripts/change_url

@@ -54,7 +54,7 @@ fi
 #=================================================
 ynh_script_progression --message="Configuring permissions..."
 
-# Temporary fix for the API permission
+# Temporary fix for the API permission (workaround for https://github.com/YunoHost/issues/issues/2294 )
 ynh_permission_url --permission="api" --url="re:$new_domain\/.well-known\/.*" --auth_header="false" --clear_urls
 
 #=================================================

scripts/install

@@ -21,18 +21,6 @@ ynh_mysql_connect_as --user=$db_user --password="$db_pwd" --database=$db_name \
 #=================================================
 ynh_script_progression --message="Setting up source files..." --weight=5
 
-# Load the last available version
-source upgrade.d/upgrade.last.sh
-
-# Create an app.src for the last version of nextcloud
-cat > ../conf/app.src << EOF
-SOURCE_URL=https://download.nextcloud.com/server/releases/nextcloud-$next_version.tar.bz2
-SOURCE_SUM=$nextcloud_source_sha256
-SOURCE_SUM_PRG=sha256sum
-SOURCE_FORMAT=tar.bz2
-SOURCE_IN_SUBDIR=true
-EOF
-
 # Enable YunoHost patches on Nextcloud sources
 cp -a ../sources/patches_last_version/* ../sources/patches
 # Download, check integrity, uncompress and patch the source from app.src
@@ -108,7 +96,7 @@ exec_occ ldap:create-empty-config
 
 # Load the installation config file in Nextcloud
 nc_conf="$install_dir/config_install.json"
-ynh_add_config --template="../conf/config_install.json" --destination="$nc_conf"
+ynh_add_config --template="config_install.json" --destination="$nc_conf"
 
 exec_occ config:import "$nc_conf"
 
@@ -117,7 +105,7 @@ ynh_secure_remove --file="$nc_conf"
 
 # Load the additional config file (used also for upgrade)
 nc_conf="$install_dir/config.json"
-ynh_add_config --template="../conf/config.json" --destination="$nc_conf"
+ynh_add_config --template="config.json" --destination="$nc_conf"
 
 exec_occ config:import "$nc_conf"
 
@@ -201,7 +189,7 @@ ynh_store_file_checksum --file="$install_dir/config/config.php"
 #=================================================
 
 cron_path="/etc/cron.d/$app"
-ynh_add_config --template="../conf/nextcloud.cron" --destination="$cron_path"
+ynh_add_config --template="nextcloud.cron" --destination="$cron_path"
 chown root: "$cron_path"
 chmod 644 "$cron_path"
 

scripts/upgrade

@@ -19,11 +19,12 @@ if [ -z "${phpflags:-}" ]; then
 	ynh_app_setting_set --app=$app --key=phpflags --value=$phpflags
 fi
 
-# Delete existing ini configuration file (backward compatibility)
+if ynh_compare_current_package_version --comparison lt --version 22.2~ynh1
-if [ -f /etc/php/$YNH_PHP_VERSION/fpm/conf.d/20-$app.ini ]; then
+then
-    ynh_secure_remove --file=/etc/php/$YNH_PHP_VERSION/fpm/conf.d/20-$app.ini
+    ynh_die --message="Upgrading from Nextcloud < 22.2 is not supported anymore. You should first upgrade to 22.2 using: yunohost app upgrade nextcloud -u https://github.com/YunoHost-Apps/nextcloud_ynh/tree/41f5f902e7c7cd3c30a6793020562ba98b9bf3e9"
 fi
 
+
 #=================================================
 # SPECIFIC UPGRADE
 #=================================================
@@ -31,8 +32,13 @@ fi
 # VERSION TO THE NEXT ONE
 #=================================================
 
-current_version=$(grep OC_VersionString "$install_dir/version.php" | cut -d\' -f2)
+filter_boring_occ_warnings() {
-current_major_version=${current_version%%.*}
+    # Filter stupid and boring messages such as the progress bar looking like:
+    # 3/3 [============================] 100% Starting ...
+    # and being pretty much useless, as well as the annoying warning about "only a limited number of commands" etc...
+
+    sed -E 's@\s*([0-9]+\/[0-9]+\s+\[(-|>|=)+\]\s+[0-9]+%|\s*Starting ...|Nextcloud or one of the apps require upgrade - only a limited number of commands are available|You may use your browser or the occ upgrade command to do the upgrade)@@g'
+}
 
 # Define a function to execute commands with `occ`
 exec_occ() {
@@ -43,23 +49,24 @@ exec_occ() {
     elif [ $current_major_version -ge 24 ]
     then
         NEXTCLOUD_PHP_VERSION="8.1"
-    elif [ $current_major_version -ge 18 ]
-    then
-        NEXTCLOUD_PHP_VERSION="7.4"
     else
-        NEXTCLOUD_PHP_VERSION="7.1"
+        NEXTCLOUD_PHP_VERSION="7.4"
     fi
 
-    # NB : be super careful when designing this part of the code, because calling ynh_install_app_dependencies 
+    # NB : be super careful when designing this part of the code, because calling ynh_install_app_dependencies
     # will do magic regarding php configuration and $phpversion when the php version of the dependencies changes ...
     phpversion=$(ynh_app_setting_get --app=$app --key=phpversion)
     if [[ "$NEXTCLOUD_PHP_VERSION" != "$phpversion" ]]; then
         local pkg_dependencies="$(dpkg-query --show --showformat='${Depends}' ${app}-ynh-deps)"
         pkg_dependencies="${pkg_dependencies//$phpversion/$NEXTCLOUD_PHP_VERSION}"
+        # Packaging v1 ~legacy : ynh_install_app_dependencies is designed to be called several times
+        # but the second time it will *append* the list of dependencies rather than replace the existing dependencies
+        # resulting in a crash when parsing what's the php version the app uses, hence we need to force the full-replacement
+        YNH_INSTALL_APP_DEPENDENCIES_REPLACE=true
         ynh_install_app_dependencies "$pkg_dependencies"
-    fi 
+    fi
 (cd "$install_dir" && ynh_exec_as "$app" \
-    php$NEXTCLOUD_PHP_VERSION --define apc.enable_cli=1 occ --no-interaction --no-ansi "$@")
+    php$NEXTCLOUD_PHP_VERSION --define apc.enable_cli=1 occ --no-interaction --no-ansi "$@") 2> >(filter_boring_occ_warnings >&2)
 }
 
 # Define a function to add an external storage
@@ -74,16 +81,49 @@ local mount_id=$(exec_occ files_external:create --output=json \
     || exec_occ files_external:option "$mount_id" enable_sharing true
 }
 
+function list_installed_apps_not_compatible_with_future_version()
+{
+    local nextcloud_destination_version="$1"
+    local nextcloud_current_version="$(grep OC_VersionString "$install_dir/version.php" | cut -d\' -f2)"
+    local installed_apps=$(mktemp)
+    local core_apps_in_current_version=$(mktemp)
+    local nextcloud_destination_appcatalog=$(mktemp)
+
+    # Run a first "dummy" command just to make sure we have the appropriate php dependencies installed,
+    # otherwise this creates funky stuff when tweaking the apt deps because the next command is piped into jq ...
+    exec_occ -V >/dev/null
+    # List installed apps
+    exec_occ app:list --output json | jq -r ".enabled | keys[]" | sort > $installed_apps
+    # Fetch Nextcloud list of core apps from their github repo for the current version
+    curl -s https://raw.githubusercontent.com/nextcloud/server/v$nextcloud_current_version/core/shipped.json | jq -r '.shippedApps[]' | sort > $core_apps_in_current_version
+    # Fetch Nextcloud app catalog (doesnt contain core app) for the future version
+    curl -s https://apps.nextcloud.com/api/v1/platform/$nextcloud_destination_version.0.0/apps.json | jq -r '.[] | .id' | sort > $nextcloud_destination_appcatalog
+
+    # Compute set complement, cf https://catonmat.net/set-operations-in-unix-shell
+    # We want to list the installed apps which are neither core apps nor in the destination catalog
+    comm -23 <(comm -23 $installed_apps $core_apps_in_current_version) $nextcloud_destination_appcatalog
+}
+
+
+current_version=$(grep OC_VersionString "$install_dir/version.php" | cut -d\' -f2)
+current_major_version=${current_version%%.*}
+
+last_version=$(ynh_read_manifest --manifest_key="resources.sources.main.url" | grep -o '[0-9][0-9]\.[0-9]\.[0-9]')
+last_major_version=${last_version%%.*}
+
+if [[ "$last_major_version" != "$current_major_version" ]]
+then
+    installed_apps_not_compatible_with_future_version="$(list_installed_apps_not_compatible_with_future_version $last_major_version)"
+    if [[ -n "$installed_apps_not_compatible_with_future_version" ]]
+    then
+        ynh_die --message="The following apps are not (yet?) compatible with Nextcloud $last_major_version. You should make sure to upgrade the app, or disable it, or wait for it to become compatible before running this upgrade : $installed_apps_not_compatible_with_future_version"
+    fi
+fi
+
 if [ "$upgrade_type" == "UPGRADE_APP" ]
 then
     ynh_script_progression --message="Upgrading Nextcloud..." --weight=3
 
-    # Load the last available version
-    source upgrade.d/upgrade.last.sh
-    last_version=$next_version
-
-    last_major_version=${last_version%%.*}
-
     # Set write access for the following commands
     chown -R $app: "$install_dir" "$data_dir"
 
@@ -104,54 +144,30 @@ then
     # Take all apps enabled, and check if mail is one of them
     # Then temporary disable the mail app
     mail_app_must_be_reactived=0
-    
+
     if exec_occ app:list | awk '/Enabled/{f=1;next} /Disabled/{f=0} f' | grep -q -w mail; then
         exec_occ app:disable mail
         mail_app_must_be_reactived=1
     fi
-    
+
     # While the current version is not the last version, do an upgrade
     while [ "$last_version" != "$current_version" ]
     do
 
-        # The major version is the first part of the version number
+        next_major_version="$(( $current_major_version + 1 ))"
-        current_major_version=${current_version%%.*}
+        if [[ "$next_major_version" -ge "$last_major_version" ]]; then
-
+            ynh_print_info --message="Upgrading to Nextcloud $last_version"
-        if [ ! -f upgrade.d/upgrade.$current_major_version.sh ]; then
-            source upgrade.d/upgrade.last.sh
-        else
-            source upgrade.d/upgrade.$current_major_version.sh
-        fi
-
-        # If the current version has the same major version than the next one,
-        # then it's the last upgrade to do
-        # We also cover the case where the last version is the first of the current major version series
-        # (e.g. 20.0.0 is the latest version)
-        if [[ ("$last_major_version" -eq "$current_major_version") || ( ("$last_major_version" -eq "$((current_major_version+1))") && ("$next_version" == "$last_version") ) ]]; then
-            current_major_version=last
-            # Enable YunoHost patches on Nextcloud sources
             cp -a ../sources/patches_last_version/* ../sources/patches
+            source_id="main"
+        else
+            ynh_print_info --message="Upgrading to Nextcloud $next_major_version"
+            source_id="$next_major_version"
         fi
 
-        # Load the value for this version
-        source upgrade.d/upgrade.$current_major_version.sh
-
-        ynh_print_info --message="Upgrade to Nextcloud $next_version"
-
-        # Create an app.src for this version of Nextcloud
-        cat > ../conf/app.src << EOF
-SOURCE_URL=https://download.nextcloud.com/server/releases/nextcloud-$next_version.tar.bz2
-SOURCE_SUM=$nextcloud_source_sha256
-SOURCE_SUM_PRG=sha256sum
-SOURCE_FORMAT=tar.bz2
-SOURCE_IN_SUBDIR=true
-EOF
-
         # Create a temporary directory
         tmpdir="$(ynh_smart_mktemp min_size=300)"
 
-        # Install the next nextcloud version in $tmpdir
+        ynh_setup_source --dest_dir="$tmpdir" --source_id="$source_id"
-        ynh_setup_source --dest_dir="$tmpdir"
 
         # Backup the config file in the temp dir
         cp -a "$install_dir/config/config.php" "$tmpdir/config/config.php"
@@ -176,7 +192,6 @@ EOF
         # Replace the old Nextcloud by the new one
         ynh_secure_remove --file="$install_dir"
         mv "$tmpdir" "$install_dir"
-        ynh_secure_remove --file="$tmpdir"
 
         # Set write access for the following commands
         chown -R $app: "$install_dir" "$data_dir"
@@ -184,7 +199,7 @@ EOF
         # Upgrade Nextcloud (SUCCESS = 0, UP_TO_DATE = 3)
         exec_occ maintenance:mode --off
         exec_occ upgrade \
-        || [ $? -eq 3 ] || ynh_die --message="Unable to upgrade Nextcloud"
+        || [ $? -eq 3 ] || ynh_die --message="Unable to upgrade $app"
 
         # Get the new current version number
         current_version=$(grep OC_VersionString "$install_dir/version.php" | cut -d\' -f2)
@@ -198,17 +213,17 @@ EOF
     exec_occ db:add-missing-columns -n
     exec_occ db:add-missing-primary-keys -n
     exec_occ db:convert-filecache-bigint -n
-    
+
     #=================================================
     # CONFIGURE NEXTCLOUD
     #=================================================
-    ynh_script_progression --message="Reconfiguring Nextcloud..." --weight=9
+    ynh_script_progression --message="Reconfiguring $app..." --weight=9
 
     # Verify the checksum and backup the file if it's different
     ynh_backup_if_checksum_is_different --file="$install_dir/config/config.php"
 
     nc_conf="${install_dir}/config.json"
-    ynh_add_config --template="../conf/config.json" --destination="$nc_conf"
+    ynh_add_config --template="config.json" --destination="$nc_conf"
 
     # Reneable the mail app
     if [ $mail_app_must_be_reactived -eq 1 ]; then
@@ -295,15 +310,15 @@ chmod 750 $install_dir
 #=================================================
 ynh_script_progression --message="Regenerating system configurations for $app..." --weight=2
 
-# -------
+#-------------------------------------------------
 # PHP-FPM
-# -------
+#-------------------------------------------------
 
 ynh_add_fpm_config
 
-# -------
+#-------------------------------------------------
 # NGINX
-# -------
+#-------------------------------------------------
 
 # Delete current NGINX configuration to be able to check if .well-known is already served.
 ynh_backup_if_checksum_is_different --file="/etc/nginx/conf.d/$domain.d/$app.conf"
@@ -325,24 +340,24 @@ fi
 # Create a dedicated NGINX config
 ynh_add_nginx_config
 
-# -------
+#-------------------------------------------------
 # CRON JOB
-# -------
+#-------------------------------------------------
 cron_path="/etc/cron.d/$app"
-ynh_add_config --template="../conf/nextcloud.cron" --destination="$cron_path"
+ynh_add_config --template="nextcloud.cron" --destination="$cron_path"
 chown root: "$cron_path"
 chmod 644 "$cron_path"
 
 exec_occ background:cron
 
-# -------
+#-------------------------------------------------
 # LOGROTATE
-# -------
+#-------------------------------------------------
 ynh_use_logrotate --non-append
 
-# -------
+#-------------------------------------------------
 # FAIL2BAN
-# -------
+#-------------------------------------------------
 
 # Create a dedicated Fail2Ban config
 ynh_add_fail2ban_config --logpath="/home/yunohost.app/$app/data/nextcloud.log" --failregex="^.*Login failed: '.*' \(Remote IP: '<HOST>'.*$" --max_retry=5

scripts/upgrade.d/upgrade.10.sh

@@ -1,7 +0,0 @@
-#!/bin/bash
-
-# Version cible de la mise à jour de Nextcloud
-next_version="11.0.0"
-
-# Nextcloud tarball checksum
-nextcloud_source_sha256="5bdfcb36c5cf470b9a6679034cabf88bf1e50a9f3e47c08d189cc2280b621429"

scripts/upgrade.d/upgrade.11.sh

@@ -1,7 +0,0 @@
-#!/bin/bash
-
-# Version cible de la mise à jour de Nextcloud
-next_version="12.0.0"
-
-# Nextcloud tarball checksum
-nextcloud_source_sha256="1b9d9cf05e657cd564a552b418fbf42d669ca51e0fd1f1f118fe44cbf93a243f"

scripts/upgrade.d/upgrade.12.sh

@@ -1,7 +0,0 @@
-#!/bin/bash
-
-# Version cible de la mise à jour de Nextcloud
-next_version="13.0.0"
-
-# Nextcloud tarball checksum
-nextcloud_source_sha256="38e6064432a2d1a044f219028d3fd46cb7a943a47e11eef346810bd289705aec"

scripts/upgrade.d/upgrade.13.sh

@@ -1,7 +0,0 @@
-#!/bin/bash
-
-# Last available nextcloud version
-next_version="14.0.0"
-
-# Nextcloud tarball checksum sha256
-nextcloud_source_sha256="f965c14286e7aabbfe49c947d86af59597af302c35d10e0b5440e7e6c53b8f47"

scripts/upgrade.d/upgrade.14.sh

@@ -1,7 +0,0 @@
-#!/bin/bash
-
-# Last available nextcloud version
-next_version="15.0.0"
-
-# Nextcloud tarball checksum sha256
-nextcloud_source_sha256="5bb0c58171353da844019b64080c21078002a59ab956ab72adb958844a98eb78"

scripts/upgrade.d/upgrade.15.sh

@@ -1,7 +0,0 @@
-#!/bin/bash
-
-# Last available nextcloud version
-next_version="16.0.0"
-
-# Nextcloud tarball checksum sha256
-nextcloud_source_sha256="4532f7028b1d9bf060f75ac4fbbde52a59ecd9c9155f3178a038d3cf3609402e"

scripts/upgrade.d/upgrade.16.sh

@@ -1,7 +0,0 @@
-#!/bin/bash
-
-# Last available nextcloud version
-next_version="17.0.0"
-
-# Nextcloud tarball checksum sha256
-nextcloud_source_sha256="6081421b33ecdb3130b2bfb2293a3f4045aeb0b471ee570e675de3d931a142a6"

scripts/upgrade.d/upgrade.17.sh

@@ -1,7 +0,0 @@
-#!/bin/bash
-
-# Last available nextcloud version
-next_version="18.0.0"
-
-# Nextcloud tarball checksum sha256
-nextcloud_source_sha256="194095a5586d84040bc455f77b8aa6c80f9a6a6dd713c9aebdad046713d4267b"

scripts/upgrade.d/upgrade.18.sh

@@ -1,7 +0,0 @@
-#!/bin/bash
-
-# Last available nextcloud version
-next_version="19.0.0"
-
-# Nextcloud tarball checksum sha256
-nextcloud_source_sha256="d23d429657c5e3476d7e73af1eafc70e42a81cfe2ed65b20655a005724fe0aae"

scripts/upgrade.d/upgrade.19.sh

@@ -1,7 +0,0 @@
-#!/bin/bash
-
-# Last available nextcloud version
-next_version="20.0.0"
-
-# Nextcloud tarball checksum sha256
-nextcloud_source_sha256="a273e0151f68567f729d9a82a7e3f124ff0f0471aa17bae6bfd83c5362d84cd8"

scripts/upgrade.d/upgrade.20.sh

@@ -1,7 +0,0 @@
-#!/bin/bash
-
-# Last available nextcloud version
-next_version="21.0.0"
-
-# Nextcloud tarball checksum sha256
-nextcloud_source_sha256="ceadaeef67685a11afc5b23b0a86ba3c7bd0a7b138d5d1ecc05262383655f1f0"

scripts/upgrade.d/upgrade.21.sh

@@ -1,7 +0,0 @@
-#!/bin/bash
-
-# Last available nextcloud version
-next_version="22.2.10"
-
-# Nextcloud tarball checksum sha256
-nextcloud_source_sha256="8de167bfcfcaa661245a00a5ac36628e7961951b9fe2dfaf4f8a5aac6907ccdb"

scripts/upgrade.d/upgrade.22.sh

@@ -1,7 +0,0 @@
-#!/bin/bash
-
-# Last available Nextcloud version
-next_version="23.0.0"
-
-# Nextcloud tarball checksum sha256
-nextcloud_source_sha256="c37592abc3b65c8fd28459281a24f414b87af52fc8c2ea979be3f9be75d01a2c"

scripts/upgrade.d/upgrade.23.sh

@@ -1,7 +0,0 @@
-#!/bin/bash
-
-# Last available Nextcloud version
-next_version="24.0.0"
-
-# Nextcloud tarball checksum sha256
-nextcloud_source_sha256="176cb5620f20465fb4759bdf3caaebeb7acff39d6c8630351af9f8738c173780"

scripts/upgrade.d/upgrade.24.sh

@@ -1,7 +0,0 @@
-#!/bin/bash
-
-# Last available Nextcloud version
-next_version="25.0.0"
-
-# Nextcloud tarball checksum sha256
-nextcloud_source_sha256="2c05ac9d7b72b44ef8b3d2ae03ff0fd6121e254b8054556f5163bd8760dd8f49"

scripts/upgrade.d/upgrade.25.sh

@@ -1,7 +0,0 @@
-#!/bin/bash
-
-# Last available Nextcloud version
-next_version="26.0.0"
-
-# Nextcloud tarball checksum sha256
-nextcloud_source_sha256="f163150363aee9366ecb5cd5259bf6756ed4f073cea78b5fa515cada7a0d0c3d"

scripts/upgrade.d/upgrade.26.sh

@@ -1,7 +0,0 @@
-#!/bin/bash
-
-# Last available Nextcloud version
-next_version="27.0.0"
-
-# Nextcloud tarball checksum sha256
-nextcloud_source_sha256="3d312a09b9345ac058758dd7b4059bf3cf0b1f0f1d747251b6fac3585ba6533f"

scripts/upgrade.d/upgrade.27.sh

@@ -1,7 +0,0 @@
-#!/bin/bash
-
-# Last available Nextcloud version
-next_version="28.0.0"
-
-# Nextcloud tarball checksum sha256
-nextcloud_source_sha256="4e8b0b74b40221e85f92ab869d0873c69a52d7e43889d9259c6259428a6a36f2"

scripts/upgrade.d/upgrade.9.sh

@@ -1,7 +0,0 @@
-#!/bin/bash
-
-# Version cible de la mise à jour de Nextcloud
-next_version="10.0.2"
-
-# Nextcloud tarball checksum
-nextcloud_source_sha256="a687a818778413484f06bb23b4e98589c73729fe2aa9feb1bf5584e3bd37103c"

scripts/upgrade.d/upgrade.last.sh

@@ -1,7 +0,0 @@
-#!/bin/bash
-
-# Last available Nextcloud version
-next_version="28.0.1"
-
-# Nextcloud tarball checksum sha256
-nextcloud_source_sha256="2f80735b443082272fe6a3b5e32137957f1fc448c75342b94b5200b29725f3a4"