From babfa4e8c99dfb429d5d63805b97394f08438635 Mon Sep 17 00:00:00 2001 From: lapineige Date: Sun, 25 Jun 2023 20:23:41 +0200 Subject: [PATCH] First try --- scripts/install | 157 +++--------------------------------------------- 1 file changed, 7 insertions(+), 150 deletions(-) diff --git a/scripts/install b/scripts/install index 4245199..5b9fb7b 100755 --- a/scripts/install +++ b/scripts/install @@ -9,169 +9,34 @@ source _common.sh source /usr/share/yunohost/helpers -# Install parameters are automatically saved as settings -# -# Settings are automatically loaded as bash variables -# in every app script context, therefore typically these will exist: -# - $domain -# - $path -# - $language -# ... etc -# -# Resources defined in the manifest are provisioned prior to this script -# and corresponding settings are also available, such as: -# - $install_dir -# - $port -# - $db_name -# ... - -# -# $app is the app id (i.e. 'example' for first install, -# or 'example__2', '__3', ... for multi-instance installs) -# - #================================================= # APP "BUILD" (DEPLOYING SOURCES, VENV, COMPILING ETC) #================================================= # DOWNLOAD, CHECK AND UNPACK SOURCE #================================================= -ynh_script_progression --message="Setting up source files..." --weight=1 +ynh_script_progression --message="Installing Peertube remote runner npm module..." --weight=1 -### `ynh_setup_source` is used to install an app from a zip or tar.gz file, -### downloaded from an upstream source, like a git repository. -### `ynh_setup_source` use the file conf/app.src - -# Download, check integrity, uncompress and patch the source from app.src -ynh_setup_source --dest_dir="$install_dir" - -# $install_dir will automatically be initialized with some decent -# permission by default ... however, you may need to recursively reapply -# ownership to all files such as after the ynh_setup_source step chown -R $app:www-data "$install_dir" +pushd "$final_path" + ynh_use_nodejs + ynh_exec_as $app env $ynh_node_load_PATH NODE_CONFIG_DIR="$final_path/config" NODE_ENV=production $ynh_npm install -g @peertube/peertube-runner +popd + #================================================= # SYSTEM CONFIGURATION #================================================= ynh_script_progression --message="Adding system configurations related to $app..." --weight=1 -### `ynh_add_fpm_config` is used to set up a PHP config. -### You can remove it if your app doesn't use PHP. -### `ynh_add_fpm_config` will use the files conf/php-fpm.conf -### If you're not using these lines: -### - You can remove these files in conf/. -### - Remove the section "BACKUP THE PHP-FPM CONFIGURATION" in the backup script -### - Remove also the section "REMOVE PHP-FPM CONFIGURATION" in the remove script -### - As well as the section "RESTORE THE PHP-FPM CONFIGURATION" in the restore script -### with the reload at the end of the script. -### - And the section "PHP-FPM CONFIGURATION" in the upgrade script - -# Create a dedicated PHP-FPM config using the conf/php-fpm.conf or conf/extra_php-fpm.conf -ynh_add_fpm_config - -# Create a dedicated NGINX config using the conf/nginx.conf template -ynh_add_nginx_config - -### `ynh_systemd_config` is used to configure a systemd script for an app. -### It can be used for apps that use sysvinit (with adaptation) or systemd. -### Have a look at the app to be sure this app needs a systemd script. -### `ynh_systemd_config` will use the file conf/systemd.service -### If you're not using these lines: -### - You can remove those files in conf/. -### - Remove the section "BACKUP SYSTEMD" in the backup script -### - Remove also the section "STOP AND REMOVE SERVICE" in the remove script -### - As well as the section "RESTORE SYSTEMD" in the restore script -### - And the section "SETUP SYSTEMD" in the upgrade script - # Create a dedicated systemd config ynh_add_systemd_config -### `yunohost service add` integrates a service in YunoHost. It then gets -### displayed in the admin interface and through the others `yunohost service` commands. -### (N.B.: this line only makes sense if the app adds a service to the system!) -### If you're not using these lines: -### - You can remove these files in conf/. -### - Remove the section "REMOVE SERVICE INTEGRATION IN YUNOHOST" in the remove script -### - As well as the section "INTEGRATE SERVICE IN YUNOHOST" in the restore script -### - And the section "INTEGRATE SERVICE IN YUNOHOST" in the upgrade script +yunohost service add $app --description="Peertube remote runner" --log="/var/log/$app/$app.log" -yunohost service add $app --description="A short description of the app" --log="/var/log/$app/$app.log" - -### Additional options starting with 3.8: -### -### --needs_exposed_ports "$port" a list of ports that needs to be publicly exposed -### which will then be checked by YunoHost's diagnosis system -### (N.B. DO NOT USE THIS is the port is only internal!!!) -### -### --test_status "some command" a custom command to check the status of the service -### (only relevant if 'systemctl status' doesn't do a good job) -### -### --test_conf "some command" some command similar to "nginx -t" that validates the conf of the service -### -### Re-calling 'yunohost service add' during the upgrade script is the right way -### to proceed if you later realize that you need to enable some flags that -### weren't enabled on old installs (be careful it'll override the existing -### service though so you should re-provide all relevant flags when doing so) - -### `ynh_use_logrotate` is used to configure a logrotate configuration for the logs of this app. -### Use this helper only if there is effectively a log file for this app. -### If you're not using this helper: -### - Remove the section "BACKUP LOGROTATE" in the backup script -### - Remove also the section "REMOVE LOGROTATE CONFIGURATION" in the remove script -### - As well as the section "RESTORE THE LOGROTATE CONFIGURATION" in the restore script -### - And the section "SETUP LOGROTATE" in the upgrade script - -# Use logrotate to manage application logfile(s) -ynh_use_logrotate - -# Create a dedicated Fail2Ban config -ynh_add_fail2ban_config --logpath="/var/log/nginx/${domain}-error.log" --failregex="Regex to match into the log for a failed login" #================================================= # APP INITIAL CONFIGURATION #================================================= -# ADD A CONFIGURATION -#================================================= -ynh_script_progression --message="Adding a configuration file..." --weight=1 - -### You can add specific configuration files. -### -### Typically, put your template conf file in ../conf/your_config_file -### The template may contain strings such as __FOO__ or __FOO_BAR__, -### which will automatically be replaced by the values of $foo and $foo_bar -### -### ynh_add_config will also keep track of the config file's checksum, -### which later during upgrade may allow to automatically backup the config file -### if it's found that the file was manually modified -### -### Check the documentation of `ynh_add_config` for more info. - -ynh_add_config --template="some_config_file" --destination="$install_dir/some_config_file" - -# FIXME: this should be handled by the core in the future -# You may need to use chmod 600 instead of 400, -# for example if the app is expected to be able to modify its own config -chmod 400 "$install_dir/some_config_file" -chown $app:$app "$install_dir/some_config_file" - -### For more complex cases where you want to replace stuff using regexes, -### you shoud rely on ynh_replace_string (which is basically a wrapper for sed) -### When doing so, you also need to manually call ynh_store_file_checksum -### -### ynh_replace_string --match_string="match_string" --replace_string="replace_string" --target_file="$install_dir/some_config_file" -### ynh_store_file_checksum --file="$install_dir/some_config_file" - -#================================================= -# SETUP APPLICATION WITH CURL -#================================================= - -### Use these lines only if the app installation needs to be finalized through -### web forms. We generally don't want to ask the final user, -### so we're going to use curl to automatically fill the fields and submit the -### forms. - -# Installation with curl -ynh_script_progression --message="Finalizing installation..." --weight=1 -ynh_local_curl "/INSTALL_PATH" "key1=value1" "key2=value2" "key3=value3" #================================================= # GENERIC FINALIZATION @@ -180,14 +45,6 @@ ynh_local_curl "/INSTALL_PATH" "key1=value1" "key2=value2" "key3=value3" #================================================= ynh_script_progression --message="Starting a systemd service..." --weight=1 -### `ynh_systemd_action` is used to start a systemd service for an app. -### Only needed if you have configure a systemd service -### If you're not using these lines: -### - Remove the section "STOP SYSTEMD SERVICE" and "START SYSTEMD SERVICE" in the backup script -### - As well as the section "START SYSTEMD SERVICE" in the restore script -### - As well as the section"STOP SYSTEMD SERVICE" and "START SYSTEMD SERVICE" in the upgrade script -### - And the section "STOP SYSTEMD SERVICE" and "START SYSTEMD SERVICE" in the change_url script - # Start a systemd service ynh_systemd_action --service_name=$app --action="start" --log_path="/var/log/$app/$app.log"