Initial packaging from Yologen

conf/nginx.conf

@@ -1,28 +1,16 @@
 #sub_path_only rewrite ^__PATH__$ __PATH__/ permanent;
 location __PATH__/ {
 
-  # Path to source
+  client_max_body_size 10M;
-  alias __INSTALL_DIR__/;
 
-### Example PHP configuration (remove it if not used)
+  proxy_pass http://127.0.0.1:__PORT__;
-  index index.php;
+  proxy_http_version 1.1;
+  proxy_set_header Upgrade $http_upgrade;
+  proxy_set_header Connection "Upgrade";
 
-  # Common parameter to increase upload size limit in conjunction with dedicated php-fpm file
+  # preserve client IP
-  # client_max_body_size 50M;
+  proxy_set_header X-Forwarded-For $remote_addr;
 
-  try_files $uri $uri/ index.php;
+  # Include SSOWAT user panel's shortcut tile.
-  location ~ [^/]\.php(/|$) {
-    fastcgi_split_path_info ^(.+?\.php)(/.*)$;
-    fastcgi_pass unix:/var/run/php/php__PHPVERSION__-fpm-__NAME__.sock;
-
-    fastcgi_index index.php;
-    include fastcgi_params;
-    fastcgi_param REMOTE_USER $remote_user;
-    fastcgi_param PATH_INFO $fastcgi_path_info;
-    fastcgi_param SCRIPT_FILENAME $request_filename;
-  }
-### End of PHP configuration part
-
-  # Include SSOWAT user panel.
   include conf.d/yunohost_panel.conf.inc;
 }

conf/systemd.service

@@ -1,19 +1,22 @@
 [Unit]
-Description=Small description of the service
+Description=Service for Penpot (__APP__)
 After=network.target
 
 [Service]
 Type=simple
 User=__APP__
 Group=__APP__
+
 WorkingDirectory=__INSTALL_DIR__/
-ExecStart=__INSTALL_DIR__/script
+ExecStart=
 StandardOutput=append:/var/log/__APP__/__APP__.log
 StandardError=inherit
+Restart=on-failure
+RestartSec=10
 
-### Depending on specificities of your service/app, you may need to tweak these
-### .. but this should be a good baseline
 # Sandboxing options to harden security
+# Depending on specificities of your service/app, you may need to tweak these
+# .. but this should be a good baseline
 # Details for these options: https://www.freedesktop.org/software/systemd/man/systemd.exec.html
 NoNewPrivileges=yes
 PrivateTmp=yes

manifest.toml

@@ -1,135 +1,74 @@
-#:schema https://raw.githubusercontent.com/YunoHost/apps/master/schemas/manifest.v2.schema.json
-
 packaging_format = 2
 
-id = "example"
+id = "penpot"
-name = "Example app"
+name = "Penpot"
-description.en = "Explain in *a few (10~15) words* the purpose of the app or what it actually does (it is meant to give a rough idea to users browsing a catalog of 100+ apps)"
-description.fr = "Expliquez en *quelques* (10~15) mots l'utilité de l'app ou ce qu'elle fait (l'objectif est de donner une idée grossière pour des utilisateurs qui naviguent dans un catalogue de 100+ apps)"
 
-version = "1.0~ynh1"
+description.en = "Penpot - The Open-Source design & prototyping platform "
+description.fr = "Penpot - The Open-Source design & prototyping platform "
 
-maintainers = ["johndoe"]
+version = "1.19.2~ynh1"
+
+maintainers = ["orhtej2"]
 
 [upstream]
-# NB: Only the "license" key is mandatory. Remove entries for which there's no relevant data
+license = "MPL-2.0"
-license = "free"
+website = "https://penpot.app/"
-website = "https://example.com"
-demo = "https://demo.example.com"
-admindoc = "https://yunohost.org/packaging_apps"
-userdoc = "https://yunohost.org/apps"
-code = "https://some.forge.com/example/example"
-# FIXME: optional but recommended if relevant, this is meant to contain the Common Platform Enumeration, which is
-# sort of a standard id for applications defined by the NIST. In particular, YunoHost may use this is in the future
-# to easily track CVE (=security reports) related to apps. The CPE may be obtained by searching here:
-# https://nvd.nist.gov/products/cpe/search.
-# For example, for Nextcloud, the CPE is 'cpe:2.3:a:nextcloud:nextcloud' (no need to include the version number)
-cpe = "???"
 
-# FIXME: optional but recommended (or remove if irrelevant / not applicable).
+admindoc = "https://help.penpot.app/technical-guide/"
-# This is meant to be an URL where people can financially support this app, especially when its development is based
+userdoc = "https://help.penpot.app/user-guide/"
-# on volunteers and/or financed by its community. YunoHost may later advertise it in the webadmin.
+code = "https://github.com/penpot/penpot"
-fund = "???"
 
 [integration]
-yunohost = ">= 11.2"
+yunohost = '>= 11.2'
-# FIXME: can be replaced by a list of supported archs using the dpkg --print-architecture nomenclature (amd64/i386/armhf/arm64), for example: ["amd64", "i386"]
+architectures = "amd64" # TODO : handle the "all" option (no ["all"])
-architectures = "all"
+multi_instance = true ldap = "false" # TODO : fixme, use actual booleans + handle the "not_relevant" value
-multi_instance = true
+sso = "true"
-
+# FIXME: replace with an **estimate** minimum disk and RAM requirements. e.g. 20M, 400M, 1G... You may have have a look at CI results
-# FIXME: replace with true, false, or "not_relevant".
-# Not to confuse with the "sso" key: the "ldap" key corresponds to wether or not a user *can* login on the app using
-# its YunoHost credentials.
-ldap = "?"
-
-# FIXME: replace with true, false, or "not_relevant".
-# Not to confuse with the "ldap" key: the "sso" key corresponds to wether or not a user is *automatically logged-in*
-# on the app when logged-in on the YunoHost portal.
-sso = "?"
-
-# FIXME: replace with an **estimate** minimum disk and RAM requirements. e.g. 20M, 400M, 1G...
 disk = "50M"
 ram.build = "50M"
 ram.runtime = "50M"
 
 [install]
+
     [install.domain]
-    # this is a generic question - ask strings are automatically handled by YunoHost's core
     type = "domain"
 
     [install.path]
-    # this is a generic question - ask strings are automatically handled by YunoHost's core
     type = "path"
     default = "/example"
 
     [install.init_main_permission]
-    # this is a generic question - ask strings are automatically handled by YunoHost's core
-    # This won't be saved as setting and will instead be used to initialize the SSOwat permission
     type = "group"
     default = "visitors"
 
-    [install.language]
-    ask.en = "Choose the application language"
-    ask.fr = "Choisissez la langue de l'application"
-    type = "select"
-    choices = ["fr", "en"]
-    default = "fr"
-
-    [install.admin]
-    # this is a generic question - ask strings are automatically handled by YunoHost's core
-    type = "user"
-
-    [install.password]
-    # this is a generic question - ask strings are automatically handled by YunoHost's core
-    # Note that user-provided passwords questions are not automatically saved as setting
-    help.en = "Use the help field to add an information for the admin about this question."
-    help.fr = "Utilisez le champ aide pour ajouter une information à l'intention de l'administrateur à propos de cette question."
-    type = "password"
-
 [resources]
-    # See the packaging documentation for the full set
-    # of explanation regarding the behavior and properties for each of those
 
     [resources.sources]
 
-    [resources.sources.main]
+        [resources.sources.main]
-    # This will pre-fetch the asset which can then be deployed during the install/upgrade scripts with :
+        # This will pre-fetch the asset which can then be deployed during the install/upgrade scripts with :
-    #    ynh_setup_source --dest_dir="$install_dir"
+        #    ynh_setup_source --dest_dir="$install_dir"
-    # You can also define other assets than "main" and add --source_id="foobar" in the previous command
+        # You can also define other assets than "main" and add --source_id="foobar" in the previous command
-    url = "https://github.com/foo/bar/archive/refs/tags/v1.2.3.tar.gz"
+        url = "https://github.com/penpot/penpot/archive/refs/tags/1.19.2.tar.gz"
-    sha256 = "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+        sha256 = "14de5b71f13f0fd542234f16fa5a307fbee7088bdfa343a53ff923b3f95f4edb"
 
-    # These infos are used by https://github.com/YunoHost/apps/blob/master/tools/autoupdate_app_sources/autoupdate_app_sources.py
+        # These infos are used by https://github.com/YunoHost/apps/blob/master/tools/autoupdate_app_sources/autoupdate_app_sources.py
-    # to auto-update the previous asset urls and sha256sum + manifest version
+        # to auto-update the previous asset urls and sha256sum + manifest version
-    # assuming the upstream's code repo is on github and relies on tags or releases
+        # assuming the upstream's code repo is on github and relies on tags or releases
-    # See the 'sources' resource documentation for more details
+        # See the 'sources' resource documentation for more details
 
-    # autoupdate.strategy = "latest_github_tag"
+        autoupdate.strategy = "latest_github_tag"
 
     [resources.system_user]
-    # This will provision/deprovision a unix system user
 
     [resources.install_dir]
-    # This will create/remove the install dir as /var/www/$app
-    # and store the corresponding setting $install_dir
 
     [resources.data_dir]
-    # This will create/remove the data dir as /home/yunohost.app/$app
-    # and store the corresponding setting $data_dir
 
     [resources.permissions]
-    # This will configure SSOwat permission for $domain/$path/
-    # The initial allowed group of user is configured via the init_main_permission question (public=visitors, private=all_users)
     main.url = "/"
 
     [resources.ports]
-    # This will pick a random port for reverse-proxying and store it as the $port setting
-
     [resources.apt]
-    # This will automatically install/uninstall the following apt packages
+    packages = "postgresql redis  postgresql "[resources.database]
-    # and implicitly define the $phpversion setting as 8.0 (if phpX.Y-foobar dependencies are listed)
+    type = "postgresql"
-    packages = "mariadb-server, deb1, deb2, php8.0-foo, php8.0-bar"
-
-    [resources.database]
-    # This will automatically provision/deprovison a MySQL DB and store the corresponding credentials in settings $db_user, $db_name, $db_pwd
-    type = "mysql"

scripts/_common.sh

@@ -7,11 +7,3 @@
 #=================================================
 # PERSONAL HELPERS
 #=================================================
-
-#=================================================
-# EXPERIMENTAL HELPERS
-#=================================================
-
-#=================================================
-# FUTURE OFFICIAL HELPERS
-#=================================================

scripts/backup

@@ -1,4 +1,5 @@
 #!/bin/bash
+#### App file generated with YoloGen, the YunoHost app generator, version .
 
 #=================================================
 # GENERIC START
@@ -15,66 +16,24 @@ source /usr/share/yunohost/helpers
 #=================================================
 ynh_print_info --message="Declaring files to be backed up..."
 
-### N.B. : the following 'ynh_backup' calls are only a *declaration* of what needs
-### to be backuped and not an actual copy of any file. The actual backup that
-### creates and fills the archive with the files happens in the core after this
-### script is called. Hence ynh_backups calls take basically 0 seconds to run.
-
-#=================================================
-# BACKUP THE APP MAIN DIR
-#=================================================
-
 ynh_backup --src_path="$install_dir"
 
-#=================================================
-# BACKUP THE DATA DIR
-#=================================================
-
-### Only relevant if there is a "data_dir" resource for this app
 ynh_backup --src_path="$data_dir" --is_big
 
-#=================================================
-# SYSTEM CONFIGURATION
-#=================================================
-
-# Backup the PHP-FPM configuration
-ynh_backup --src_path="/etc/php/$phpversion/fpm/pool.d/$app.conf"
-
-# Backup the nginx configuration
 ynh_backup --src_path="/etc/nginx/conf.d/$domain.d/$app.conf"
 
-# Backup the systemd service unit
-ynh_backup --src_path="/etc/systemd/system/$app.service"
-
-# Backup the logrotate configuration
 ynh_backup --src_path="/etc/logrotate.d/$app"
 
-# Backup the Fail2Ban config
+ynh_backup --src_path="/etc/systemd/system/$app.service"
-ynh_backup --src_path="/etc/fail2ban/jail.d/$app.conf"
-ynh_backup --src_path="/etc/fail2ban/filter.d/$app.conf"
 
 #=================================================
-# BACKUP VARIOUS FILES
+# BACKUP THE DATABASE
 #=================================================
-
+ynh_print_info --message="Backing up the postgresql database..."
-ynh_backup --src_path="/etc/cron.d/$app"
-
-ynh_backup --src_path="/etc/$app/"
-
-### For apps with huge logs, you might want to pass --is_big,
-### and in restore script, mkdir and pass --not_mandatory to ynh_restore_file.
-ynh_backup --src_path="/var/log/$app/"
-
-#=================================================
-# BACKUP THE MYSQL DATABASE
-#=================================================
-ynh_print_info --message="Backing up the MySQL database..."
 
 ### (However, things like MySQL dumps *do* take some time to run, though the
 ### copy of the generated dump to the archive still happens later)
 
-ynh_mysql_dump_db --database="$db_name" > db.sql
-
 #=================================================
 # END OF SCRIPT
 #=================================================

scripts/change_url

@@ -1,9 +1,5 @@
 #!/bin/bash
 
-## this script is only run if actual change to domain/path is detected, if you're here either $domain or $path changed
-## new location is available via $domain and $path (or $new_domain and $new_path variables if you want to be explicit)
-## old values are available via, you guessed it, $old_domain and $old_path
-
 #=================================================
 # GENERIC STARTING
 #=================================================
@@ -13,21 +9,18 @@
 source _common.sh
 source /usr/share/yunohost/helpers
 
-#=================================================
-# STANDARD MODIFICATIONS
 #=================================================
 # STOP SYSTEMD SERVICE
 #=================================================
-ynh_script_progression --message="Stopping a systemd service..." --weight=1
+ynh_script_progression --message="Stopping a systemd service..."
 
-ynh_systemd_action --service_name="$app" --action="stop" --log_path="/var/log/$app/$app.log"
+ynh_systemd_action --service_name=$app --action="stop" --log_path="/var/log/$app/$app.log"
 
 #=================================================
 # MODIFY URL IN NGINX CONF
 #=================================================
-ynh_script_progression --message="Updating NGINX web server configuration..." --weight=1
+ynh_script_progression --message="Updating NGINX web server configuration..."
 
-# this will most likely adjust NGINX config correctly
 ynh_change_url_nginx_config
 
 #=================================================
@@ -36,16 +29,12 @@ ynh_change_url_nginx_config
 # ...
 #=================================================
 
-## do any changes to files that reference specific installation domain/path, i.e. regenerate configs etc
-
-#=================================================
-# GENERIC FINALISATION
 #=================================================
 # START SYSTEMD SERVICE
 #=================================================
-ynh_script_progression --message="Starting a systemd service..." --weight=1
+ynh_script_progression --message="Starting a systemd service..."
 
-ynh_systemd_action --service_name="$app" --action="start" --log_path="/var/log/$app/$app.log"
+ynh_systemd_action --service_name=$app --action="start" --log_path="/var/log/$app/$app.log"
 
 #=================================================
 # END OF SCRIPT

scripts/install

@@ -5,197 +5,85 @@
 #=================================================
 # IMPORT GENERIC HELPERS
 #=================================================
-
 source _common.sh
 source /usr/share/yunohost/helpers
 
-### Install parameters are automatically saved as settings
-###
-### Settings are automatically loaded as bash variables
-### in every app script context, therefore typically these will exist:
-### - $domain
-### - $path
-### - $language
-### ... etc
-###
-### Resources defined in the manifest are provisioned prior to this script
-### and corresponding settings are also available, such as:
-### - $install_dir
-### - $port
-### - $db_name
-### ...
-###
-### $app is the app id (i.e. 'example' for first install,
-### or 'example__2', '__3', ... for multi-instance installs)
-
 #=================================================
-# INITIALIZE AND STORE SETTINGS
+# INSTALL DEPENDENCIES
 #=================================================
 
-# If you need to, you can define custom settings
+ynh_script_progression --message="Installing NodeJS..." --weight=10
-# (or remove this section entirely if not relevant for you)
+
-foo="bar"
+# Install Nodejs
-ynh_app_setting_set --app=$app --key=foo --value=$foo
+ynh_exec_warn_less ynh_install_nodejs --nodejs_version=$nodejs_version
+ynh_use_nodejs
 
 #=================================================
 # APP "BUILD" (DEPLOYING SOURCES, VENV, COMPILING ETC)
 #=================================================
 # DOWNLOAD, CHECK AND UNPACK SOURCE
 #=================================================
-ynh_script_progression --message="Setting up source files..." --weight=1
+ynh_script_progression --message="Setting up source files..."
 
-### `ynh_setup_source` is used to install an app from a zip or tar.gz file,
-### downloaded from an upstream source, like a git repository.
-### `ynh_setup_source` use the file manifest.toml
-
-# Download, check integrity, uncompress and patch the source from manifest.toml
 ynh_setup_source --dest_dir="$install_dir"
 
-### $install_dir will automatically be initialized with some decent
+chown -R $app:www-data "$install_dir"
-### permission by default ... however, you may need to recursively reapply
-### ownership to all files such as after the ynh_setup_source step
-chown -R "$app:www-data" "$install_dir"
 
 #=================================================
 # SYSTEM CONFIGURATION
 #=================================================
-ynh_script_progression --message="Adding system configurations related to $app..." --weight=1
+ynh_script_progression --message="Adding system configurations related to $app..."
-
-### `ynh_add_fpm_config` is used to set up a PHP config.
-### You can remove it if your app doesn't use PHP.
-### `ynh_add_fpm_config` will use the files conf/extra_php-fpm.conf
-### If you're not using these lines:
-###   - You can remove these files in conf/.
-###   - Remove the section "BACKUP THE PHP-FPM CONFIGURATION" in the backup script
-###   - Remove also the section "REMOVE PHP-FPM CONFIGURATION" in the remove script
-###   - As well as the section "RESTORE THE PHP-FPM CONFIGURATION" in the restore script
-###     with the reload at the end of the script.
-###   - And the section "PHP-FPM CONFIGURATION" in the upgrade script
-
-# Create a PHP-FPM config (with conf/extra_php-fpm.conf being appended to it)
-ynh_add_fpm_config
 
 # Create a dedicated NGINX config using the conf/nginx.conf template
 ynh_add_nginx_config
 
-### `ynh_systemd_config` is used to configure a systemd script for an app.
-### It can be used for apps that use sysvinit (with adaptation) or systemd.
-### Have a look at the app to be sure this app needs a systemd script.
-### `ynh_systemd_config` will use the file conf/systemd.service
-### If you're not using these lines:
-###   - You can remove those files in conf/.
-###   - Remove the section "BACKUP SYSTEMD" in the backup script
-###   - Remove also the section "STOP AND REMOVE SERVICE" in the remove script
-###   - As well as the section "RESTORE SYSTEMD" in the restore script
-###   - And the section "SETUP SYSTEMD" in the upgrade script
-
 # Create a dedicated systemd config
 ynh_add_systemd_config
 
-### `yunohost service add` integrates a service in YunoHost. It then gets
+yunohost service add $app --log="/var/log/$app/$app.log"
-### displayed in the admin interface and through the others `yunohost service` commands.
-### (N.B.: this line only makes sense if the app adds a service to the system!)
-### If you're not using these lines:
-###   - You can remove these files in conf/.
-###   - Remove the section "REMOVE SERVICE INTEGRATION IN YUNOHOST" in the remove script
-###   - As well as the section "INTEGRATE SERVICE IN YUNOHOST" in the restore script
-###   - And the section "INTEGRATE SERVICE IN YUNOHOST" in the upgrade script
-
-### Additional options starting with 3.8:
-###
-### --needs_exposed_ports "$port" a list of ports that needs to be publicly exposed
-###                               which will then be checked by YunoHost's diagnosis system
-###                               (N.B. DO NOT USE THIS if the port is only internal!!!)
-###
-### --test_status "some command"  a custom command to check the status of the service
-###                               (only relevant if 'systemctl status' doesn't do a good job)
-###
-### --test_conf "some command"    some command similar to "nginx -t" that validates the conf of the service
-###
-### Re-calling 'yunohost service add' during the upgrade script is the right way
-### to proceed if you later realize that you need to enable some flags that
-### weren't enabled on old installs (be careful it'll override the existing
-### service though so you should re-provide all relevant flags when doing so)
-yunohost service add "$app" --description="A short description of the app" --log="/var/log/$app/$app.log"
-
-### `ynh_use_logrotate` is used to configure a logrotate configuration for the logs of this app.
-### Use this helper only if there is effectively a log file for this app.
-### If you're not using this helper:
-###   - Remove the section "BACKUP LOGROTATE" in the backup script
-###   - Remove also the section "REMOVE LOGROTATE CONFIGURATION" in the remove script
-###   - As well as the section "RESTORE THE LOGROTATE CONFIGURATION" in the restore script
-###   - And the section "SETUP LOGROTATE" in the upgrade script
 
 # Use logrotate to manage application logfile(s)
 ynh_use_logrotate
 
-# Create a dedicated Fail2Ban config
-ynh_add_fail2ban_config --logpath="/var/log/nginx/${domain}-error.log" --failregex="Regex to match into the log for a failed login"
-
 #=================================================
 # APP INITIAL CONFIGURATION
 #=================================================
 # ADD A CONFIGURATION
 #=================================================
-ynh_script_progression --message="Adding a configuration file..." --weight=1
+ynh_script_progression --message="Adding app's configuration file..."
 
-### You can add specific configuration files.
+ynh_add_config --template="" --destination="$install_dir/"
-###
-### Typically, put your template conf file in ../conf/your_config_file
-### The template may contain strings such as __FOO__ or __FOO_BAR__,
-### which will automatically be replaced by the values of $foo and $foo_bar
-###
-### ynh_add_config will also keep track of the config file's checksum,
-### which later during upgrade may allow to automatically backup the config file
-### if it's found that the file was manually modified
-###
-### Check the documentation of `ynh_add_config` for more info.
-
-ynh_add_config --template="some_config_file" --destination="$install_dir/some_config_file"
 
 # FIXME: this should be handled by the core in the future
-### You may need to use chmod 600 instead of 400,
+# You may need to use chmod 600 instead of 400,
-### for example if the app is expected to be able to modify its own config
+# for example if the app is expected to be able to modify its own config
-chmod 400 "$install_dir/some_config_file"
+chmod 400 "$install_dir/"
-chown "$app:$app" "$install_dir/some_config_file"
+chown $app:$app "$install_dir/"
-
-### For more complex cases where you want to replace stuff using regexes,
-### you shoud rely on ynh_replace_string (which is basically a wrapper for sed)
-### When doing so, you also need to manually call ynh_store_file_checksum
-###
-### ynh_replace_string --match_string="match_string" --replace_string="replace_string" --target_file="$install_dir/some_config_file"
-### ynh_store_file_checksum --file="$install_dir/some_config_file"
 
 #=================================================
-# SETUP APPLICATION WITH CURL
+# INSTALL APP
 #=================================================
+ynh_script_progression --message="Installing app..." --weight=5
 
-### Use these lines only if the app installation needs to be finalized through
+pushd $install_dir
-### web forms. We generally don't want to ask the final user,
+ynh_exec_as $app $ynh_node_load_PATH yarn install --production --pure-lockfile
-### so we're going to use curl to automatically fill the fields and submit the
+ynh_exec_as $app $ynh_node_load_PATH yarn build
-### forms.
+popd
-
-# Installation with curl
-ynh_script_progression --message="Finalizing installation..." --weight=1
-ynh_local_curl "/INSTALL_PATH" "key1=value1" "key2=value2" "key3=value3"
 
 #=================================================
-# GENERIC FINALIZATION
+# FINALIZE APP INSTALL WITH CURL
+#=================================================
+
+# REMOVEME? ynh_script_progression --message="Finalizing installation..."
+# REMOVEME? ynh_local_curl "/INSTALL_PATH" "key1=value1" "key2=value2" "key3=value3"
+
 #=================================================
 # START SYSTEMD SERVICE
 #=================================================
-ynh_script_progression --message="Starting a systemd service..." --weight=1
+ynh_script_progression --message="Starting app's systemd service..."
-
-### `ynh_systemd_action` is used to start a systemd service for an app.
-### Only needed if you have configure a systemd service
-### If you're not using these lines:
-###   - Remove the section "STOP SYSTEMD SERVICE" and "START SYSTEMD SERVICE" in the backup script
-###   - As well as the section "START SYSTEMD SERVICE" in the restore script
-###   - As well as the section"STOP SYSTEMD SERVICE" and "START SYSTEMD SERVICE" in the upgrade script
-###   - And the section "STOP SYSTEMD SERVICE" and "START SYSTEMD SERVICE" in the change_url script
 
 # Start a systemd service
-ynh_systemd_action --service_name="$app" --action="start" --log_path="/var/log/$app/$app.log"
+ynh_systemd_action --service_name=$app --action="start" --log_path="/var/log/$app/$app.log"
 
 #=================================================
 # END OF SCRIPT

scripts/remove

@@ -5,52 +5,31 @@
 #=================================================
 # IMPORT GENERIC HELPERS
 #=================================================
-
 source _common.sh
 source /usr/share/yunohost/helpers
 
-### Settings are automatically loaded as bash variables
-### in every app script context, therefore typically these will exist:
-### - $domain
-### - $path
-### - $language
-### - $install_dir
-### - $port
-### ...
-
-### For remove operations :
-### - the core will deprovision every resource defined in the manifest **after** this script is ran
-### this includes removing the install directory, and data directory (if --purge was used)
-
 #=================================================
 # REMOVE SYSTEM CONFIGURATIONS
 #=================================================
-ynh_script_progression --message="Removing system configurations related to $app..." --weight=1
+# REMOVE SYSTEMD SERVICE
-
+#=================================================
-### This should be a symetric version of what happens in the install script
+ynh_script_progression --message="Removing system configurations related to $app..."
 
 # Remove the service from the list of services known by YunoHost (added from `yunohost service add`)
-if ynh_exec_warn_less yunohost service status "$app" >/dev/null; then
+if ynh_exec_warn_less yunohost service status $app >/dev/null
-    ynh_script_progression --message="Removing $app service integration..." --weight=1
+then
-    yunohost service remove "$app"
+	ynh_script_progression --message="Removing $app service integration..."
+	yunohost service remove $app
 fi
 
-ynh_remove_fail2ban_config
-
-ynh_remove_logrotate
-
 ynh_remove_systemd_config
 
 ynh_remove_nginx_config
 
-ynh_remove_fpm_config
+ynh_remove_logrotate
 
 # Remove other various files specific to the app... such as :
 
-ynh_secure_remove --file="/etc/cron.d/$app"
-
-ynh_secure_remove --file="/etc/$app"
-
 ynh_secure_remove --file="/var/log/$app"
 
 #=================================================

scripts/restore

@@ -17,10 +17,7 @@ ynh_script_progression --message="Restoring the app main directory..." --weight=
 
 ynh_restore_file --origin_path="$install_dir"
 
-### $install_dir will automatically be initialized with some decent
+chown -R $app:www-data "$install_dir"
-### permissions by default ... however, you may need to recursively reapply
-### ownership to all files such as after the ynh_setup_source step
-chown -R "$app:www-data" "$install_dir"
 
 #=================================================
 # RESTORE THE DATA DIRECTORY
@@ -29,64 +26,42 @@ ynh_script_progression --message="Restoring the data directory..." --weight=1
 
 ynh_restore_file --origin_path="$data_dir" --not_mandatory
 
-### (Same as for install dir)
+# (Same as for install dir)
-chown -R "$app:www-data" "$data_dir"
+chown -R $app:www-data "$data_dir"
 
 #=================================================
 # RESTORE THE MYSQL DATABASE
 #=================================================
-ynh_script_progression --message="Restoring the MySQL database..." --weight=1
 
-ynh_mysql_connect_as --user="$db_user" --password="$db_pwd" --database="$db_name" < ./db.sql
+ynh_script_progression --message="Restoring the PostgreSQL database..." --weight=1
+
+ynh_psql_connect_as --user=$db_user --password=$db_pwd --database=$db_name < ./db.sql
 
 #=================================================
 # RESTORE SYSTEM CONFIGURATIONS
 #=================================================
 ynh_script_progression --message="Restoring system configurations related to $app..." --weight=1
 
-### This should be a symetric version of what happens in the install script
+# This should be a symetric version of what happens in the install script
-
-ynh_restore_file --origin_path="/etc/php/$phpversion/fpm/pool.d/$app.conf"
 
 ynh_restore_file --origin_path="/etc/nginx/conf.d/$domain.d/$app.conf"
 
 ynh_restore_file --origin_path="/etc/systemd/system/$app.service"
-systemctl enable "$app.service" --quiet
+systemctl enable $app.service --quiet
 
-yunohost service add "$app" --description="A short description of the app" --log="/var/log/$app/$app.log"
+yunohost service add $app --log="/var/log/$app/$app.log"
 
 ynh_restore_file --origin_path="/etc/logrotate.d/$app"
 
-ynh_restore_file --origin_path="/etc/fail2ban/jail.d/$app.conf"
+# Other various files...
-ynh_restore_file --origin_path="/etc/fail2ban/filter.d/$app.conf"
-ynh_systemd_action --action=restart --service_name=fail2ban
 
-#=================================================
-# RESTORE VARIOUS FILES
-#=================================================
-
-ynh_restore_file --origin_path="/etc/cron.d/$app"
-ynh_restore_file --origin_path="/etc/$app/"
-
-### For apps with huge logs, you might want to not backup logs every time:
-### The mkdir call is just here in case the log directory was not backed up.
-### mkdir -p "/var/log/$app"
-### chown $app:www-data "/var/log/$app"
-### ynh_restore_file --src_path="/var/log/$app/" --not_mandatory
-###
-### For other apps, the simple way is better:
-ynh_restore_file --origin_path="/var/log/$app/"
-
-#=================================================
-# GENERIC FINALIZATION
 #=================================================
 # RELOAD NGINX AND PHP-FPM OR THE APP SERVICE
 #=================================================
 ynh_script_progression --message="Reloading NGINX web server and $app's service..." --weight=1
 
-### Typically you only have either $app or php-fpm but not both at the same time...
+# Typically you only have either $app or php-fpm but not both at the same time...
-ynh_systemd_action --service_name="$app" --action="start" --log_path="/var/log/$app/$app.log"
+ynh_systemd_action --service_name=$app --action="start" --log_path="/var/log/$app/$app.log"
-ynh_systemd_action --service_name="php$phpversion-fpm" --action=reload
 
 ynh_systemd_action --service_name=nginx --action=reload
 

scripts/upgrade

@@ -9,55 +9,20 @@
 source _common.sh
 source /usr/share/yunohost/helpers
 
-### Settings are automatically loaded as bash variables
+upgrade_type=$(ynh_check_app_version_changed)
-### in every app script context, therefore typically these will exist:
-### - $domain
-### - $path
-### - $language
-### - $install_dir
-### - $port
-### ...
-
-### In the context of upgrade,
-### - resources are automatically provisioned / updated / deleted (depending on existing resources)
-### - a safety backup is automatically created by the core and will be restored if the upgrade fails
-
-### This variable describes which upgrade type is occurring, allowing the script to handle different modes:
-### - UPGRADE_PACKAGE if only the YunoHost package has changed
-### - UPGRADE_APP if the upstream app version has changed
-### If your package needs to handle other things, like same-version upgrades or downgrades, please
-### check out the $YNH_APP_UPGRADE_TYPE variable that can contain DOWNGRADE and UPGRADE_SAME too.
-# upgrade_type=$(ynh_check_app_version_changed)
 
 #=================================================
 # STANDARD UPGRADE STEPS
 #=================================================
 # ENSURE DOWNWARD COMPATIBILITY
 #=================================================
-#ynh_script_progression --message="Ensuring downward compatibility..." --weight=1
-
-### N.B. : the following setting migration snippets are provided as *EXAMPLES*
-### of what you may want to do in some cases (e.g. a setting was not defined on
-### some legacy installs and you therefore want to initiaze stuff during upgrade)
-
-# If db_name doesn't exist, create it
-# if [ -z "$db_name" ]; then
-#     db_name=$(ynh_sanitize_dbid --db_name=$app)
-#     ynh_app_setting_set --app=$app --key=db_name --value=$db_name
-# fi
-
-# If install_dir doesn't exist, create it
-# if [ -z "$install_dir" ]; then
-#     install_dir=/var/www/$app
-#     ynh_app_setting_set --app=$app --key=install_dir --value=$install_dir
-# fi
 
 #=================================================
 # STOP SYSTEMD SERVICE
 #=================================================
-ynh_script_progression --message="Stopping a systemd service..." --weight=1
+ynh_script_progression --message="Stopping a systemd service..."
 
-ynh_systemd_action --service_name="$app" --action="stop" --log_path="/var/log/$app/$app.log"
+ynh_systemd_action --service_name=$app --action="stop" --log_path="/var/log/$app/$app.log"
 
 #=================================================
 # "REBUILD" THE APP (DEPLOY NEW SOURCES, RERUN NPM BUILD...)
@@ -65,68 +30,47 @@ ynh_systemd_action --service_name="$app" --action="stop" --log_path="/var/log/$a
 # DOWNLOAD, CHECK AND UNPACK SOURCE
 #=================================================
 
-ynh_script_progression --message="Upgrading source files..." --weight=1
+if [ "$upgrade_type" == "UPGRADE_APP" ]
+then
+	ynh_script_progression --message="Upgrading source files..."
 
-# Download, check integrity, uncompress and patch the source from manifest.toml
+	# Download, check integrity, uncompress and patch the source from app.src
-ynh_setup_source --dest_dir="$install_dir"
+	ynh_setup_source --dest_dir="$install_dir"
+fi
 
-### $install_dir will automatically be initialized with some decent
+chown -R $app:www-data "$install_dir"
-### permissions by default ... however, you may need to recursively reapply
-### ownership to all files such as after the ynh_setup_source step
-chown -R "$app:www-data" "$install_dir"
 
 #=================================================
 # REAPPLY SYSTEM CONFIGURATIONS
 #=================================================
-ynh_script_progression --message="Upgrading system configurations related to $app..." --weight=1
+ynh_script_progression --message="Upgrading system configurations related to $app..."
-
-### This should be a literal copypaste of what happened in the install's "System configuration" section
-
-ynh_add_fpm_config
 
 ynh_add_nginx_config
 
 ynh_add_systemd_config
 
-yunohost service add "$app" --description="A short description of the app" --log="/var/log/$app/$app.log"
+yunohost service add $app --log="/var/log/$app/$app.log"
 
 ynh_use_logrotate --non-append
 
-ynh_add_fail2ban_config --logpath="/var/log/nginx/${domain}-error.log" --failregex="Regex to match into the log for a failed login"
-
 #=================================================
 # RECONFIGURE THE APP (UPDATE CONF, APPLY MIGRATIONS...)
 #=================================================
 # UPDATE A CONFIG FILE
 #=================================================
-ynh_script_progression --message="Updating a configuration file..." --weight=1
+ynh_script_progression --message="Updating a configuration file..."
 
-### Same as during install
+ynh_add_config --template="" --destination="$install_dir/"
-###
-### The file will automatically be backed-up if it's found to be manually modified (because
-### ynh_add_config keeps track of the file's checksum)
 
-ynh_add_config --template="some_config_file" --destination="$install_dir/some_config_file"
-
-# FIXME: this should be handled by the core in the future
-### You may need to use chmod 600 instead of 400,
-### for example if the app is expected to be able to modify its own config
 chmod 400 "$install_dir/some_config_file"
-chown "$app:$app" "$install_dir/some_config_file"
+chown $app:$app "$install_dir/some_config_file"
-
-### For more complex cases where you want to replace stuff using regexes,
-### you shoud rely on ynh_replace_string (which is basically a wrapper for sed)
-### When doing so, you also need to manually call ynh_store_file_checksum
-###
-### ynh_replace_string --match_string="match_string" --replace_string="replace_string" --target_file="$install_dir/some_config_file"
-### ynh_store_file_checksum --file="$install_dir/some_config_file"
 
 #=================================================
 # START SYSTEMD SERVICE
 #=================================================
-ynh_script_progression --message="Starting a systemd service..." --weight=1
+ynh_script_progression --message="Starting a systemd service..."
 
-ynh_systemd_action --service_name="$app" --action="start" --log_path="/var/log/$app/$app.log"
+ynh_systemd_action --service_name=$app --action="start" --log_path="/var/log/$app/$app.log"
 
 #=================================================
 # END OF SCRIPT