diff --git a/LICENSE b/LICENSE new file mode 100644 index 0000000..f288702 --- /dev/null +++ b/LICENSE @@ -0,0 +1,674 @@ + GNU GENERAL PUBLIC LICENSE + Version 3, 29 June 2007 + + Copyright (C) 2007 Free Software Foundation, Inc. + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The GNU General Public License is a free, copyleft license for +software and other kinds of works. + + The licenses for most software and other practical works are designed +to take away your freedom to share and change the works. By contrast, +the GNU General Public License is intended to guarantee your freedom to +share and change all versions of a program--to make sure it remains free +software for all its users. We, the Free Software Foundation, use the +GNU General Public License for most of our software; it applies also to +any other work released this way by its authors. You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +them if you wish), that you receive source code or can get it if you +want it, that you can change the software or use pieces of it in new +free programs, and that you know you can do these things. + + To protect your rights, we need to prevent others from denying you +these rights or asking you to surrender the rights. Therefore, you have +certain responsibilities if you distribute copies of the software, or if +you modify it: responsibilities to respect the freedom of others. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must pass on to the recipients the same +freedoms that you received. You must make sure that they, too, receive +or can get the source code. And you must show them these terms so they +know their rights. + + Developers that use the GNU GPL protect your rights with two steps: +(1) assert copyright on the software, and (2) offer you this License +giving you legal permission to copy, distribute and/or modify it. + + For the developers' and authors' protection, the GPL clearly explains +that there is no warranty for this free software. For both users' and +authors' sake, the GPL requires that modified versions be marked as +changed, so that their problems will not be attributed erroneously to +authors of previous versions. + + Some devices are designed to deny users access to install or run +modified versions of the software inside them, although the manufacturer +can do so. This is fundamentally incompatible with the aim of +protecting users' freedom to change the software. The systematic +pattern of such abuse occurs in the area of products for individuals to +use, which is precisely where it is most unacceptable. Therefore, we +have designed this version of the GPL to prohibit the practice for those +products. If such problems arise substantially in other domains, we +stand ready to extend this provision to those domains in future versions +of the GPL, as needed to protect the freedom of users. + + Finally, every program is threatened constantly by software patents. +States should not allow patents to restrict development and use of +software on general-purpose computers, but in those that do, we wish to +avoid the special danger that patents applied to a free program could +make it effectively proprietary. To prevent this, the GPL assures that +patents cannot be used to render the program non-free. + + The precise terms and conditions for copying, distribution and +modification follow. + + TERMS AND CONDITIONS + + 0. Definitions. + + "This License" refers to version 3 of the GNU General Public License. + + "Copyright" also means copyright-like laws that apply to other kinds of +works, such as semiconductor masks. + + "The Program" refers to any copyrightable work licensed under this +License. Each licensee is addressed as "you". "Licensees" and +"recipients" may be individuals or organizations. + + To "modify" a work means to copy from or adapt all or part of the work +in a fashion requiring copyright permission, other than the making of an +exact copy. The resulting work is called a "modified version" of the +earlier work or a work "based on" the earlier work. + + A "covered work" means either the unmodified Program or a work based +on the Program. + + To "propagate" a work means to do anything with it that, without +permission, would make you directly or secondarily liable for +infringement under applicable copyright law, except executing it on a +computer or modifying a private copy. Propagation includes copying, +distribution (with or without modification), making available to the +public, and in some countries other activities as well. + + To "convey" a work means any kind of propagation that enables other +parties to make or receive copies. Mere interaction with a user through +a computer network, with no transfer of a copy, is not conveying. + + An interactive user interface displays "Appropriate Legal Notices" +to the extent that it includes a convenient and prominently visible +feature that (1) displays an appropriate copyright notice, and (2) +tells the user that there is no warranty for the work (except to the +extent that warranties are provided), that licensees may convey the +work under this License, and how to view a copy of this License. If +the interface presents a list of user commands or options, such as a +menu, a prominent item in the list meets this criterion. + + 1. Source Code. + + The "source code" for a work means the preferred form of the work +for making modifications to it. "Object code" means any non-source +form of a work. + + A "Standard Interface" means an interface that either is an official +standard defined by a recognized standards body, or, in the case of +interfaces specified for a particular programming language, one that +is widely used among developers working in that language. + + The "System Libraries" of an executable work include anything, other +than the work as a whole, that (a) is included in the normal form of +packaging a Major Component, but which is not part of that Major +Component, and (b) serves only to enable use of the work with that +Major Component, or to implement a Standard Interface for which an +implementation is available to the public in source code form. A +"Major Component", in this context, means a major essential component +(kernel, window system, and so on) of the specific operating system +(if any) on which the executable work runs, or a compiler used to +produce the work, or an object code interpreter used to run it. + + The "Corresponding Source" for a work in object code form means all +the source code needed to generate, install, and (for an executable +work) run the object code and to modify the work, including scripts to +control those activities. However, it does not include the work's +System Libraries, or general-purpose tools or generally available free +programs which are used unmodified in performing those activities but +which are not part of the work. For example, Corresponding Source +includes interface definition files associated with source files for +the work, and the source code for shared libraries and dynamically +linked subprograms that the work is specifically designed to require, +such as by intimate data communication or control flow between those +subprograms and other parts of the work. + + The Corresponding Source need not include anything that users +can regenerate automatically from other parts of the Corresponding +Source. + + The Corresponding Source for a work in source code form is that +same work. + + 2. Basic Permissions. + + All rights granted under this License are granted for the term of +copyright on the Program, and are irrevocable provided the stated +conditions are met. This License explicitly affirms your unlimited +permission to run the unmodified Program. The output from running a +covered work is covered by this License only if the output, given its +content, constitutes a covered work. This License acknowledges your +rights of fair use or other equivalent, as provided by copyright law. + + You may make, run and propagate covered works that you do not +convey, without conditions so long as your license otherwise remains +in force. You may convey covered works to others for the sole purpose +of having them make modifications exclusively for you, or provide you +with facilities for running those works, provided that you comply with +the terms of this License in conveying all material for which you do +not control copyright. Those thus making or running the covered works +for you must do so exclusively on your behalf, under your direction +and control, on terms that prohibit them from making any copies of +your copyrighted material outside their relationship with you. + + Conveying under any other circumstances is permitted solely under +the conditions stated below. Sublicensing is not allowed; section 10 +makes it unnecessary. + + 3. Protecting Users' Legal Rights From Anti-Circumvention Law. + + No covered work shall be deemed part of an effective technological +measure under any applicable law fulfilling obligations under article +11 of the WIPO copyright treaty adopted on 20 December 1996, or +similar laws prohibiting or restricting circumvention of such +measures. + + When you convey a covered work, you waive any legal power to forbid +circumvention of technological measures to the extent such circumvention +is effected by exercising rights under this License with respect to +the covered work, and you disclaim any intention to limit operation or +modification of the work as a means of enforcing, against the work's +users, your or third parties' legal rights to forbid circumvention of +technological measures. + + 4. Conveying Verbatim Copies. + + You may convey verbatim copies of the Program's source code as you +receive it, in any medium, provided that you conspicuously and +appropriately publish on each copy an appropriate copyright notice; +keep intact all notices stating that this License and any +non-permissive terms added in accord with section 7 apply to the code; +keep intact all notices of the absence of any warranty; and give all +recipients a copy of this License along with the Program. + + You may charge any price or no price for each copy that you convey, +and you may offer support or warranty protection for a fee. + + 5. Conveying Modified Source Versions. + + You may convey a work based on the Program, or the modifications to +produce it from the Program, in the form of source code under the +terms of section 4, provided that you also meet all of these conditions: + + a) The work must carry prominent notices stating that you modified + it, and giving a relevant date. + + b) The work must carry prominent notices stating that it is + released under this License and any conditions added under section + 7. This requirement modifies the requirement in section 4 to + "keep intact all notices". + + c) You must license the entire work, as a whole, under this + License to anyone who comes into possession of a copy. This + License will therefore apply, along with any applicable section 7 + additional terms, to the whole of the work, and all its parts, + regardless of how they are packaged. This License gives no + permission to license the work in any other way, but it does not + invalidate such permission if you have separately received it. + + d) If the work has interactive user interfaces, each must display + Appropriate Legal Notices; however, if the Program has interactive + interfaces that do not display Appropriate Legal Notices, your + work need not make them do so. + + A compilation of a covered work with other separate and independent +works, which are not by their nature extensions of the covered work, +and which are not combined with it such as to form a larger program, +in or on a volume of a storage or distribution medium, is called an +"aggregate" if the compilation and its resulting copyright are not +used to limit the access or legal rights of the compilation's users +beyond what the individual works permit. Inclusion of a covered work +in an aggregate does not cause this License to apply to the other +parts of the aggregate. + + 6. Conveying Non-Source Forms. + + You may convey a covered work in object code form under the terms +of sections 4 and 5, provided that you also convey the +machine-readable Corresponding Source under the terms of this License, +in one of these ways: + + a) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by the + Corresponding Source fixed on a durable physical medium + customarily used for software interchange. + + b) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by a + written offer, valid for at least three years and valid for as + long as you offer spare parts or customer support for that product + model, to give anyone who possesses the object code either (1) a + copy of the Corresponding Source for all the software in the + product that is covered by this License, on a durable physical + medium customarily used for software interchange, for a price no + more than your reasonable cost of physically performing this + conveying of source, or (2) access to copy the + Corresponding Source from a network server at no charge. + + c) Convey individual copies of the object code with a copy of the + written offer to provide the Corresponding Source. This + alternative is allowed only occasionally and noncommercially, and + only if you received the object code with such an offer, in accord + with subsection 6b. + + d) Convey the object code by offering access from a designated + place (gratis or for a charge), and offer equivalent access to the + Corresponding Source in the same way through the same place at no + further charge. You need not require recipients to copy the + Corresponding Source along with the object code. If the place to + copy the object code is a network server, the Corresponding Source + may be on a different server (operated by you or a third party) + that supports equivalent copying facilities, provided you maintain + clear directions next to the object code saying where to find the + Corresponding Source. Regardless of what server hosts the + Corresponding Source, you remain obligated to ensure that it is + available for as long as needed to satisfy these requirements. + + e) Convey the object code using peer-to-peer transmission, provided + you inform other peers where the object code and Corresponding + Source of the work are being offered to the general public at no + charge under subsection 6d. + + A separable portion of the object code, whose source code is excluded +from the Corresponding Source as a System Library, need not be +included in conveying the object code work. + + A "User Product" is either (1) a "consumer product", which means any +tangible personal property which is normally used for personal, family, +or household purposes, or (2) anything designed or sold for incorporation +into a dwelling. In determining whether a product is a consumer product, +doubtful cases shall be resolved in favor of coverage. For a particular +product received by a particular user, "normally used" refers to a +typical or common use of that class of product, regardless of the status +of the particular user or of the way in which the particular user +actually uses, or expects or is expected to use, the product. A product +is a consumer product regardless of whether the product has substantial +commercial, industrial or non-consumer uses, unless such uses represent +the only significant mode of use of the product. + + "Installation Information" for a User Product means any methods, +procedures, authorization keys, or other information required to install +and execute modified versions of a covered work in that User Product from +a modified version of its Corresponding Source. The information must +suffice to ensure that the continued functioning of the modified object +code is in no case prevented or interfered with solely because +modification has been made. + + If you convey an object code work under this section in, or with, or +specifically for use in, a User Product, and the conveying occurs as +part of a transaction in which the right of possession and use of the +User Product is transferred to the recipient in perpetuity or for a +fixed term (regardless of how the transaction is characterized), the +Corresponding Source conveyed under this section must be accompanied +by the Installation Information. But this requirement does not apply +if neither you nor any third party retains the ability to install +modified object code on the User Product (for example, the work has +been installed in ROM). + + The requirement to provide Installation Information does not include a +requirement to continue to provide support service, warranty, or updates +for a work that has been modified or installed by the recipient, or for +the User Product in which it has been modified or installed. Access to a +network may be denied when the modification itself materially and +adversely affects the operation of the network or violates the rules and +protocols for communication across the network. + + Corresponding Source conveyed, and Installation Information provided, +in accord with this section must be in a format that is publicly +documented (and with an implementation available to the public in +source code form), and must require no special password or key for +unpacking, reading or copying. + + 7. Additional Terms. + + "Additional permissions" are terms that supplement the terms of this +License by making exceptions from one or more of its conditions. +Additional permissions that are applicable to the entire Program shall +be treated as though they were included in this License, to the extent +that they are valid under applicable law. If additional permissions +apply only to part of the Program, that part may be used separately +under those permissions, but the entire Program remains governed by +this License without regard to the additional permissions. + + When you convey a copy of a covered work, you may at your option +remove any additional permissions from that copy, or from any part of +it. (Additional permissions may be written to require their own +removal in certain cases when you modify the work.) You may place +additional permissions on material, added by you to a covered work, +for which you have or can give appropriate copyright permission. + + Notwithstanding any other provision of this License, for material you +add to a covered work, you may (if authorized by the copyright holders of +that material) supplement the terms of this License with terms: + + a) Disclaiming warranty or limiting liability differently from the + terms of sections 15 and 16 of this License; or + + b) Requiring preservation of specified reasonable legal notices or + author attributions in that material or in the Appropriate Legal + Notices displayed by works containing it; or + + c) Prohibiting misrepresentation of the origin of that material, or + requiring that modified versions of such material be marked in + reasonable ways as different from the original version; or + + d) Limiting the use for publicity purposes of names of licensors or + authors of the material; or + + e) Declining to grant rights under trademark law for use of some + trade names, trademarks, or service marks; or + + f) Requiring indemnification of licensors and authors of that + material by anyone who conveys the material (or modified versions of + it) with contractual assumptions of liability to the recipient, for + any liability that these contractual assumptions directly impose on + those licensors and authors. + + All other non-permissive additional terms are considered "further +restrictions" within the meaning of section 10. If the Program as you +received it, or any part of it, contains a notice stating that it is +governed by this License along with a term that is a further +restriction, you may remove that term. If a license document contains +a further restriction but permits relicensing or conveying under this +License, you may add to a covered work material governed by the terms +of that license document, provided that the further restriction does +not survive such relicensing or conveying. + + If you add terms to a covered work in accord with this section, you +must place, in the relevant source files, a statement of the +additional terms that apply to those files, or a notice indicating +where to find the applicable terms. + + Additional terms, permissive or non-permissive, may be stated in the +form of a separately written license, or stated as exceptions; +the above requirements apply either way. + + 8. Termination. + + You may not propagate or modify a covered work except as expressly +provided under this License. Any attempt otherwise to propagate or +modify it is void, and will automatically terminate your rights under +this License (including any patent licenses granted under the third +paragraph of section 11). + + However, if you cease all violation of this License, then your +license from a particular copyright holder is reinstated (a) +provisionally, unless and until the copyright holder explicitly and +finally terminates your license, and (b) permanently, if the copyright +holder fails to notify you of the violation by some reasonable means +prior to 60 days after the cessation. + + Moreover, your license from a particular copyright holder is +reinstated permanently if the copyright holder notifies you of the +violation by some reasonable means, this is the first time you have +received notice of violation of this License (for any work) from that +copyright holder, and you cure the violation prior to 30 days after +your receipt of the notice. + + Termination of your rights under this section does not terminate the +licenses of parties who have received copies or rights from you under +this License. If your rights have been terminated and not permanently +reinstated, you do not qualify to receive new licenses for the same +material under section 10. + + 9. Acceptance Not Required for Having Copies. + + You are not required to accept this License in order to receive or +run a copy of the Program. Ancillary propagation of a covered work +occurring solely as a consequence of using peer-to-peer transmission +to receive a copy likewise does not require acceptance. However, +nothing other than this License grants you permission to propagate or +modify any covered work. These actions infringe copyright if you do +not accept this License. Therefore, by modifying or propagating a +covered work, you indicate your acceptance of this License to do so. + + 10. Automatic Licensing of Downstream Recipients. + + Each time you convey a covered work, the recipient automatically +receives a license from the original licensors, to run, modify and +propagate that work, subject to this License. You are not responsible +for enforcing compliance by third parties with this License. + + An "entity transaction" is a transaction transferring control of an +organization, or substantially all assets of one, or subdividing an +organization, or merging organizations. If propagation of a covered +work results from an entity transaction, each party to that +transaction who receives a copy of the work also receives whatever +licenses to the work the party's predecessor in interest had or could +give under the previous paragraph, plus a right to possession of the +Corresponding Source of the work from the predecessor in interest, if +the predecessor has it or can get it with reasonable efforts. + + You may not impose any further restrictions on the exercise of the +rights granted or affirmed under this License. For example, you may +not impose a license fee, royalty, or other charge for exercise of +rights granted under this License, and you may not initiate litigation +(including a cross-claim or counterclaim in a lawsuit) alleging that +any patent claim is infringed by making, using, selling, offering for +sale, or importing the Program or any portion of it. + + 11. Patents. + + A "contributor" is a copyright holder who authorizes use under this +License of the Program or a work on which the Program is based. The +work thus licensed is called the contributor's "contributor version". + + A contributor's "essential patent claims" are all patent claims +owned or controlled by the contributor, whether already acquired or +hereafter acquired, that would be infringed by some manner, permitted +by this License, of making, using, or selling its contributor version, +but do not include claims that would be infringed only as a +consequence of further modification of the contributor version. For +purposes of this definition, "control" includes the right to grant +patent sublicenses in a manner consistent with the requirements of +this License. + + Each contributor grants you a non-exclusive, worldwide, royalty-free +patent license under the contributor's essential patent claims, to +make, use, sell, offer for sale, import and otherwise run, modify and +propagate the contents of its contributor version. + + In the following three paragraphs, a "patent license" is any express +agreement or commitment, however denominated, not to enforce a patent +(such as an express permission to practice a patent or covenant not to +sue for patent infringement). To "grant" such a patent license to a +party means to make such an agreement or commitment not to enforce a +patent against the party. + + If you convey a covered work, knowingly relying on a patent license, +and the Corresponding Source of the work is not available for anyone +to copy, free of charge and under the terms of this License, through a +publicly available network server or other readily accessible means, +then you must either (1) cause the Corresponding Source to be so +available, or (2) arrange to deprive yourself of the benefit of the +patent license for this particular work, or (3) arrange, in a manner +consistent with the requirements of this License, to extend the patent +license to downstream recipients. "Knowingly relying" means you have +actual knowledge that, but for the patent license, your conveying the +covered work in a country, or your recipient's use of the covered work +in a country, would infringe one or more identifiable patents in that +country that you have reason to believe are valid. + + If, pursuant to or in connection with a single transaction or +arrangement, you convey, or propagate by procuring conveyance of, a +covered work, and grant a patent license to some of the parties +receiving the covered work authorizing them to use, propagate, modify +or convey a specific copy of the covered work, then the patent license +you grant is automatically extended to all recipients of the covered +work and works based on it. + + A patent license is "discriminatory" if it does not include within +the scope of its coverage, prohibits the exercise of, or is +conditioned on the non-exercise of one or more of the rights that are +specifically granted under this License. You may not convey a covered +work if you are a party to an arrangement with a third party that is +in the business of distributing software, under which you make payment +to the third party based on the extent of your activity of conveying +the work, and under which the third party grants, to any of the +parties who would receive the covered work from you, a discriminatory +patent license (a) in connection with copies of the covered work +conveyed by you (or copies made from those copies), or (b) primarily +for and in connection with specific products or compilations that +contain the covered work, unless you entered into that arrangement, +or that patent license was granted, prior to 28 March 2007. + + Nothing in this License shall be construed as excluding or limiting +any implied license or other defenses to infringement that may +otherwise be available to you under applicable patent law. + + 12. No Surrender of Others' Freedom. + + If conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot convey a +covered work so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you may +not convey it at all. For example, if you agree to terms that obligate you +to collect a royalty for further conveying from those to whom you convey +the Program, the only way you could satisfy both those terms and this +License would be to refrain entirely from conveying the Program. + + 13. Use with the GNU Affero General Public License. + + Notwithstanding any other provision of this License, you have +permission to link or combine any covered work with a work licensed +under version 3 of the GNU Affero General Public License into a single +combined work, and to convey the resulting work. The terms of this +License will continue to apply to the part which is the covered work, +but the special requirements of the GNU Affero General Public License, +section 13, concerning interaction through a network will apply to the +combination as such. + + 14. Revised Versions of this License. + + The Free Software Foundation may publish revised and/or new versions of +the GNU General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + + Each version is given a distinguishing version number. If the +Program specifies that a certain numbered version of the GNU General +Public License "or any later version" applies to it, you have the +option of following the terms and conditions either of that numbered +version or of any later version published by the Free Software +Foundation. If the Program does not specify a version number of the +GNU General Public License, you may choose any version ever published +by the Free Software Foundation. + + If the Program specifies that a proxy can decide which future +versions of the GNU General Public License can be used, that proxy's +public statement of acceptance of a version permanently authorizes you +to choose that version for the Program. + + Later license versions may give you additional or different +permissions. However, no additional obligations are imposed on any +author or copyright holder as a result of your choosing to follow a +later version. + + 15. Disclaimer of Warranty. + + THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY +APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT +HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY +OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, +THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM +IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF +ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. Limitation of Liability. + + IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS +THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY +GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE +USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF +DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD +PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), +EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF +SUCH DAMAGES. + + 17. Interpretation of Sections 15 and 16. + + If the disclaimer of warranty and limitation of liability provided +above cannot be given local legal effect according to their terms, +reviewing courts shall apply local law that most closely approximates +an absolute waiver of all civil liability in connection with the +Program, unless a warranty or assumption of liability accompanies a +copy of the Program in return for a fee. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +state the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + + Copyright (C) + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . + +Also add information on how to contact you by electronic and paper mail. + + If the program does terminal interaction, make it output a short +notice like this when it starts in an interactive mode: + + Copyright (C) + This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, your program's commands +might be different; for a GUI interface, you would use an "about box". + + You should also get your employer (if you work as a programmer) or school, +if any, to sign a "copyright disclaimer" for the program, if necessary. +For more information on this, and how to apply and follow the GNU GPL, see +. + + The GNU General Public License does not permit incorporating your program +into proprietary programs. If your program is a subroutine library, you +may consider it more useful to permit linking proprietary applications with +the library. If this is what you want to do, use the GNU Lesser General +Public License instead of this License. But first, please read +. diff --git a/README.md b/README.md index 9d49a9e..b48f5bf 100644 --- a/README.md +++ b/README.md @@ -1,2 +1,24 @@ -# phpipam_ynh -phpIPAM for YunoHost +# phpIPAM app for YunoHost +phpIPAM Server + +**Shipped version:** 1.4 + +- [Yunohost project](https://yunohost.org) +- [phpIPAM website](https://phpipam.net/) + +![](https://phpipam.net/css/images/phpipam_logo_small@2x.png) + + +[![Install phpIPAM with YunoHost](https://install-app.yunohost.org/install-with-yunohost.png)](https://install-app.yunohost.org/?app=phpipam) + +### Installing guide + + App can be installed by YunoHost **admin web-interface** or by **running following command**: + + $ sudo yunohost app install https://github.com/YunoHost-Apps/phpipam_ynh + + +### Upgrade this package: + + $ sudo yunohost app upgrade phpipam -u https://github.com/YunoHost-Apps/phpipam_ynh + diff --git a/check_process b/check_process new file mode 100644 index 0000000..0cbeae3 --- /dev/null +++ b/check_process @@ -0,0 +1,42 @@ +# See here for more informations +# https://github.com/YunoHost/package_check#syntax-check_process-file + +# Move this file from check_process.default to check_process when you have filled it. + +;; Test complet + ; Manifest + domain="domain.tld" (DOMAIN) + path="/" (PATH) + is_public=1 (PUBLIC|public=1|private=0) +# password="pass" +# nextclouddomain="domain.tld" + port="9980" (PORT) + ; Checks + pkg_linter=1 + setup_sub_dir=0 + setup_root=1 + setup_nourl=0 + setup_private=0 + setup_public=1 + upgrade=1 + backup_restore=1 + multi_instance=1 + incorrect_path=1 + port_already_use=0 + change_url=0 +;;; Levels + Level 1=auto + Level 2=auto + Level 3=auto +# Level 4: + Level 4=1 (This app supports the Nextcloud LDAP auth) +# Level 5: + Level 5=auto + Level 6=auto + Level 7=auto + Level 8=0 + Level 9=0 + Level 10=0 +;;; Options +Email= +Notification=none diff --git a/conf/app.src b/conf/app.src new file mode 100644 index 0000000..70effec --- /dev/null +++ b/conf/app.src @@ -0,0 +1,7 @@ +SOURCE_URL=https://github.com/phpipam/phpipam/archive/1.4.tar.gz +SOURCE_SUM=57f3fe96f0147a74cb5c62da8b2f2d5c850d666e8db302ef1bcd2e860d85e73ba714fecadab79a390475567098a36362df4d7f3a694fcc3617248116f06c0696 +SOURCE_SUM_PRG=sha512sum +SOURCE_FORMAT=tar.gz +SOURCE_IN_SUBDIR=true +SOURCE_EXTRACT=true +SOURCE_FILENAME=phpipam.tar.gz \ No newline at end of file diff --git a/conf/config.dist.php b/conf/config.dist.php new file mode 100755 index 0000000..306ca74 --- /dev/null +++ b/conf/config.dist.php @@ -0,0 +1,178 @@ +/index.php + ******************************/ +$private_subpages = array(); + + +/** + * Google MAPs API key for locations to display map + * + * Obtain key: Go to your Google Console (https://console.developers.google.com) and enable "Google Maps JavaScript API" + * from overview tab, so go to Credentials tab and make an API key for your project. + ******************************/ +$gmaps_api_key = ""; +$gmaps_api_geocode_key = ""; + +/** + * proxy connection details + ******************************/ +$proxy_enabled = false; // Enable/Disable usage of the Proxy server +$proxy_server = 'myproxy.something.com'; // Proxy server FQDN or IP +$proxy_port = '8080'; // Proxy server port +$proxy_user = 'USERNAME'; // Proxy Username +$proxy_pass = 'PASSWORD'; // Proxy Password +$proxy_use_auth = false; // Enable/Disable Proxy authentication + +/** + * General tweaks + ******************************/ +$config['logo_width'] = 220; // logo width +$config['requests_public'] = true; // Show IP request module on login page +$config['split_ip_custom_fields'] = false; // Show custom fields in separate table when editing IP address + +/** + * PHP CLI binary for scanning and network discovery. + * + * The default behaviour is to use the system wide default php version symlinked to php in PHP_BINDIR (/usr/bin/php). + * If multiple php versions are present; overide selection with $php_cli_binary. + */ +// $php_cli_binary = '/usr/bin/php7.1'; diff --git a/conf/nginx.conf b/conf/nginx.conf new file mode 100644 index 0000000..c42e7ea --- /dev/null +++ b/conf/nginx.conf @@ -0,0 +1,11 @@ +root __FINALPATH__/; +index index.php; + +location ~ \.php$ { + try_files $uri =404; + fastcgi_pass unix:/var/run/php/php7.0-fpm.sock; + fastcgi_index index.php; + fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; + include /etc/nginx/fastcgi_params; + +} \ No newline at end of file diff --git a/manifest.json b/manifest.json new file mode 100644 index 0000000..511005d --- /dev/null +++ b/manifest.json @@ -0,0 +1,58 @@ +{ + "name": "phpIPAM", + "id": "phpipam", + "packaging_format": 1, + "description": { + "en": "phpIPAM package for YunoHost.", + "fr": "phpIPAM pour YunoHost." + }, + "version": "1.4", + "url": "https://phpipam.net/", + "license": "GPL-3.0", + "maintainer": { + "name": "liberodark", + "email": "liberodark@gmail.com" + }, + "requirements": { + "yunohost": ">= 2.7.2" + }, + "multi_instance": false, + "services": [ + "nginx", + "php5-fpm", + "mysql" + ], + "arguments": { + "install": [{ + "name": "domain", + "type": "domain", + "ask": { + "en": "Choose a domain name for phpIPAM", + "fr": "Choisissez un nom de domaine pour phpIPAM" + }, + "example": "example.com" + }, + + { + "name": "path", + "type": "path", + "ask": { + "en": "Choose a path for phpIPAM /phpipam is accepted", + "fr": "Choisissez un chemin pour phpIPAM /phpipam est accepté" + }, + "example": "/phpipam", + "default": "/phpipam" + }, + + { + "name": "is_public", + "type": "boolean", + "ask": { + "en": "Is it a public site ?", + "fr": "Est-ce un site public ?" + }, + "default": "true" + } + ] + } +} diff --git a/scripts/_common.sh b/scripts/_common.sh new file mode 100644 index 0000000..0f53f77 --- /dev/null +++ b/scripts/_common.sh @@ -0,0 +1,112 @@ +#!/bin/bash + +# ============================================================================= +# YUNOHOST 2.7 FORTHCOMING HELPERS +# ============================================================================= + +# Create a dedicated nginx config +# +# usage: ynh_add_nginx_config +ynh_add_nginx_config () { + finalnginxconf="/etc/nginx/conf.d/$domain.d/$app.conf" + ynh_backup_if_checksum_is_different "$finalnginxconf" + sudo cp ../conf/nginx.conf "$finalnginxconf" + + # To avoid a break by set -u, use a void substitution ${var:-}. If the variable is not set, it's simply set with an empty variable. + # Substitute in a nginx config file only if the variable is not empty + if test -n "${path_url:-}"; then + ynh_replace_string "__PATH__" "$path_url" "$finalnginxconf" + fi + if test -n "${domain:-}"; then + ynh_replace_string "__DOMAIN__" "$domain" "$finalnginxconf" + fi + if test -n "${port:-}"; then + ynh_replace_string "__PORT__" "$port" "$finalnginxconf" + fi + if test -n "${app:-}"; then + ynh_replace_string "__NAME__" "$app" "$finalnginxconf" + fi + if test -n "${final_path:-}"; then + ynh_replace_string "__FINALPATH__" "$final_path" "$finalnginxconf" + fi + ynh_store_file_checksum "$finalnginxconf" + + sudo systemctl reload nginx +} + +# Remove the dedicated nginx config +# +# usage: ynh_remove_nginx_config +ynh_remove_nginx_config () { + ynh_secure_remove "/etc/nginx/conf.d/$domain.d/$app.conf" + sudo systemctl reload nginx +} + +# Create a dedicated php-fpm config +# +# usage: ynh_add_fpm_config +ynh_add_fpm_config () { + finalphpconf="/etc/php5/fpm/pool.d/$app.conf" + ynh_backup_if_checksum_is_different "$finalphpconf" + sudo cp ../conf/php-fpm.conf "$finalphpconf" + ynh_replace_string "__NAMETOCHANGE__" "$app" "$finalphpconf" + ynh_replace_string "__FINALPATH__" "$final_path" "$finalphpconf" + ynh_replace_string "__USER__" "$app" "$finalphpconf" + sudo chown root: "$finalphpconf" + ynh_store_file_checksum "$finalphpconf" + + if [ -e "../conf/php-fpm.ini" ] + then + finalphpini="/etc/php5/fpm/conf.d/20-$app.ini" + ynh_backup_if_checksum_is_different "$finalphpini" + sudo cp ../conf/php-fpm.ini "$finalphpini" + sudo chown root: "$finalphpini" + ynh_store_file_checksum "$finalphpini" + fi + + sudo systemctl reload php5-fpm +} + +# Remove the dedicated php-fpm config +# +# usage: ynh_remove_fpm_config +ynh_remove_fpm_config () { + ynh_secure_remove "/etc/php5/fpm/pool.d/$app.conf" + ynh_secure_remove "/etc/php5/fpm/conf.d/20-$app.ini" 2>&1 + sudo systemctl reload php5-fpm +} + +# Create a dedicated systemd config +# +# usage: ynh_add_systemd_config +ynh_add_systemd_config () { + finalsystemdconf="/etc/systemd/system/$app.service" + ynh_backup_if_checksum_is_different "$finalsystemdconf" + sudo cp ../conf/systemd.service "$finalsystemdconf" + + # To avoid a break by set -u, use a void substitution ${var:-}. If the variable is not set, it's simply set with an empty variable. + # Substitute in a nginx config file only if the variable is not empty + if test -n "${final_path:-}"; then + ynh_replace_string "__FINALPATH__" "$final_path" "$finalsystemdconf" + fi + if test -n "${app:-}"; then + ynh_replace_string "__APP__" "$app" "$finalsystemdconf" + fi + ynh_store_file_checksum "$finalsystemdconf" + + sudo chown root: "$finalsystemdconf" + sudo systemctl enable $app + sudo systemctl daemon-reload +} + +# Remove the dedicated systemd config +# +# usage: ynh_remove_systemd_config +ynh_remove_systemd_config () { + finalsystemdconf="/etc/systemd/system/$app.service" + if [ -e "$finalsystemdconf" ]; then + sudo systemctl stop $app + sudo systemctl disable $app + ynh_secure_remove "$finalsystemdconf" + fi +} diff --git a/scripts/backup b/scripts/backup new file mode 100644 index 0000000..af8ccd9 --- /dev/null +++ b/scripts/backup @@ -0,0 +1,33 @@ +#!/bin/bash + +# Exit on command errors and treat unset variables as an error +set -eu + +# See comments in install script +app=$YNH_APP_INSTANCE_NAME + +# Source YunoHost helpers +source /usr/share/yunohost/helpers + +# Backup sources & data +# Note: the last argument is where to save this path, see the restore script. +ynh_backup "/var/www/${app}" "sources" + +### MySQL (remove if not used) ### +# If a MySQL database is used: +# # Dump the database +# dbname=$app +# dbuser=$app +# dbpass=$(ynh_app_setting_get "$app" mysqlpwd) +# mysqldump -u "$dbuser" -p"$dbpass" --no-create-db "$dbname" > ./dump.sql +### MySQL end ### + +# Copy NGINX configuration +domain=$(ynh_app_setting_get "$app" domain) +ynh_backup "/etc/nginx/conf.d/${domain}.d/${app}.conf" "nginx.conf" + +### PHP (remove if not used) ### +# If a dedicated php-fpm process is used: +# # Copy PHP-FPM pool configuration +# ynh_backup "/etc/php5/fpm/pool.d/${app}.conf" "php-fpm.conf" +### PHP end ### diff --git a/scripts/install b/scripts/install new file mode 100644 index 0000000..22f2c41 --- /dev/null +++ b/scripts/install @@ -0,0 +1,174 @@ +#!/bin/bash + +#================================================= +# GENERIC START +#================================================= +# IMPORT GENERIC HELPERS +#================================================= + +source _common.sh +source /usr/share/yunohost/helpers + +#================================================= +# MANAGE SCRIPT FAILURE +#================================================= + +ynh_clean_setup () { + ### Remove this function if there's nothing to clean before calling the remove script. + true +} +# Exit if an error occurs during the execution of the script +ynh_abort_if_errors + +#================================================= +# RETRIEVE ARGUMENTS FROM THE MANIFEST +#================================================= + +# Retrieve arguments +domain=$YNH_APP_ARG_DOMAIN +path_url=$YNH_APP_ARG_PATH +is_public=$YNH_APP_ARG_IS_PUBLIC + +### If it's a multi-instance app, meaning it can be installed several times independently +### The id of the app as stated in the manifest is available as $YNH_APP_ID +### The instance number is available as $YNH_APP_INSTANCE_NUMBER (equals "1", "2", ...) +### The app instance name is available as $YNH_APP_INSTANCE_NAME +### - the first time the app is installed, YNH_APP_INSTANCE_NAME = ynhexample +### - the second time the app is installed, YNH_APP_INSTANCE_NAME = ynhexample__2 +### - ynhexample__{N} for the subsequent installations, with N=3,4, ... +### The app instance name is probably what interests you most, since this is +### guaranteed to be unique. This is a good unique identifier to define installation path, +### db names, ... +app=$YNH_APP_INSTANCE_NAME + +#================================================= +# CHECK IF THE APP CAN BE INSTALLED WITH THESE ARGS +#================================================= + +### If the app uses nginx as web server (written in HTML/PHP in most cases), the final path should be "/var/www/$app". +### If the app provides an internal web server (or uses another application server such as uwsgi), the final path should be "/opt/yunohost/$app" +final_path=/var/www/$app +test ! -e "$final_path" || ynh_die "This path already contains a folder" + +# Normalize the url path syntax +path_url=$(ynh_normalize_url_path $path_url) + +# Check web path availability +ynh_webpath_available $domain $path_url +# Register (book) web path +ynh_webpath_register $app $domain $path_url + +#================================================= +# STORE SETTINGS FROM MANIFEST +#================================================= + +ynh_app_setting_set $app domain $domain +ynh_app_setting_set $app path $path_url +ynh_app_setting_set $app is_public $is_public + + +#================================================= +# INSTALL DEPENDENCIES +#================================================= + +ynh_print_info "Installing dependencies..." + +### `ynh_install_app_dependencies` allows you to add any "apt" dependencies to the package. +### Those deb packages will be installed as dependencies of this package. +### If you're not using this helper: +### - Remove the section "REMOVE DEPENDENCIES" in the remove script +### - As well as the section "REINSTALL DEPENDENCIES" in the restore script +### - And the section "UPGRADE DEPENDENCIES" in the upgrade script + +ynh_install_app_dependencies php7.0-mbstring + +#================================================= +# CREATE A MYSQL DATABASE +#================================================= +ynh_print_info "Creating a MySQL database..." + +### Use these lines if you need a database for the application. +### `ynh_mysql_setup_db` will create a database, an associated user and a ramdom password. +### The password will be stored as 'mysqlpwd' into the app settings, +### and will be available as $db_pwd +### If you're not using these lines: +### - Remove the section "BACKUP THE MYSQL DATABASE" in the backup script +### - Remove also the section "REMOVE THE MYSQL DATABASE" in the remove script +### - As well as the section "RESTORE THE MYSQL DATABASE" in the restore script + +db_name=$(ynh_sanitize_dbid $app) +ynh_app_setting_set $app db_name $db_name +ynh_mysql_setup_db $db_name $db_name + +#================================================= +# DOWNLOAD, CHECK AND UNPACK SOURCE +#================================================= + +ynh_app_setting_set $app final_path $final_path +# Download, check integrity, uncompress and patch the source from app.src +ynh_setup_source "$final_path" + +#================================================= +# NGINX CONFIGURATION +#================================================= + +# Create a dedicated nginx config +ynh_add_nginx_config + +#================================================= +# CREATE DEDICATED USER +#================================================= + +# Create a system user +ynh_system_user_create $app + +#================================================= +# MODIFY A CONFIG FILE +#================================================= + +cp -a ../conf/config.dist.php $final_path/config.dist.php + +ynh_replace_string "yunouser" "$db_name" "$final_path/config.dist.php" +ynh_replace_string "yunopass" "$db_pwd" "$final_path/config.dist.php" +ynh_replace_string "yunobase" "$db_name" "$final_path/config.dist.php" +#ynh_replace_string "yunomail" "$email" "$final_path/config_inc.php.sample"s +#ynh_replace_string "yunodomain" "$domain" "$final_path/config_inc.php.sample" + +#================================================= +# STORE THE CONFIG FILE CHECKSUM +#================================================= + +### `ynh_store_file_checksum` is used to store the checksum of a file. +### That way, during the upgrade script, by using `ynh_backup_if_checksum_is_different`, +### you can make a backup of this file before modifying it again if the admin had modified it. + +# Calculate and store the config file checksum into the app settings +#ynh_store_file_checksum "/etc/onlyoffice/documentserver/nginx/onlyoffice-documentserver.conf" + + +#================================================= +# GENERIC FINALIZATION +#================================================= +# SECURE FILES AND DIRECTORIES +#================================================= + +### For security reason, any app should set the permissions to root: before anything else. +### Then, if write authorization is needed, any access should be given only to directories +### that really need such authorization. + +# Set permissions to app files +chown -R www-data:www-data $final_path + + +#================================================= +# SETUP SSOWAT +#================================================= + +# If app is public, add url to SSOWat conf as skipped_uris +if [ $is_public -eq 1 ]; then + # unprotected_uris allows SSO credentials to be passed anyway. + ynh_app_setting_set "$app" unprotected_uris "/" +fi + +# Reload services +systemctl reload nginx diff --git a/scripts/remove b/scripts/remove new file mode 100644 index 0000000..b87380c --- /dev/null +++ b/scripts/remove @@ -0,0 +1,133 @@ +#!/bin/bash + +#================================================= +# GENERIC START +#================================================= +# IMPORT GENERIC HELPERS +#================================================= + +source _common.sh +source /usr/share/yunohost/helpers + +#================================================= +# LOAD SETTINGS +#================================================= +ynh_print_info "Loading installation settings..." + +app=$YNH_APP_INSTANCE_NAME + +domain=$(ynh_app_setting_get $app domain) +port=$(ynh_app_setting_get $app port) +db_name=$(ynh_app_setting_get $app db_name) +db_user=$db_name +final_path=$(ynh_app_setting_get $app final_path) + +#================================================= +# STANDARD REMOVE +#================================================= +# REMOVE SERVICE FROM ADMIN PANEL +#================================================= + +# Remove a service from the admin panel, added by `yunohost service add` +if yunohost service status $app >/dev/null 2>&1 +then + ynh_print_info "Removing $app service" + yunohost service remove $app +fi + +#================================================= +# STOP AND REMOVE SERVICE +#================================================= +ynh_print_info "Stopping and removing the systemd service" + +# Remove the dedicated systemd config +ynh_remove_systemd_config + +#================================================= +# REMOVE THE MYSQL DATABASE +#================================================= +ynh_print_info "Removing the MySQL database" + +# Remove a database if it exists, along with the associated user +ynh_mysql_remove_db $db_user $db_name + +#================================================= +# REMOVE DEPENDENCIES +#================================================= +ynh_print_info "Removing dependencies" + +# Remove metapackage and its dependencies +ynh_remove_app_dependencies + +#================================================= +# REMOVE APP MAIN DIR +#================================================= +ynh_print_info "Removing app main directory" + +# Remove the app directory securely +ynh_secure_remove "$final_path" + +#================================================= +# REMOVE NGINX CONFIGURATION +#================================================= +ynh_print_info "Removing nginx web server configuration" + +# Remove the dedicated nginx config +ynh_remove_nginx_config + +#================================================= +# REMOVE PHP-FPM CONFIGURATION +#================================================= +#ynh_print_info "Removing php-fpm configuration" + +# Remove the dedicated php-fpm config +#ynh_remove_fpm_config + +#================================================= +# REMOVE LOGROTATE CONFIGURATION +#================================================= +ynh_print_info "Removing logrotate configuration" + +# Remove the app-specific logrotate config +ynh_remove_logrotate + +#================================================= +# CLOSE A PORT +#================================================= + +if yunohost firewall list | grep -q "\- $port$" +then + ynh_print_info "Closing port $port" + ynh_exec_warn_less yunohost firewall disallow TCP $port +fi + +#================================================= +# SPECIFIC REMOVE +#================================================= +# REMOVE THE CRON FILE +#================================================= + +# Remove a cron file +ynh_secure_remove "/etc/cron.d/$app" + +# Remove a directory securely +ynh_secure_remove "/etc/$app/" + +# Remove the log files +ynh_secure_remove "/var/log/$app/" + +#================================================= +# GENERIC FINALIZATION +#================================================= +# REMOVE DEDICATED USER +#================================================= +ynh_print_info "Removing the dedicated system user" + +# Delete a system user +ynh_system_user_delete $app + +#================================================= +# END OF SCRIPT +#================================================= + +ynh_print_info "Removal of $app completed" diff --git a/scripts/restore b/scripts/restore new file mode 100644 index 0000000..93169e9 --- /dev/null +++ b/scripts/restore @@ -0,0 +1,52 @@ +#!/bin/bash + +# Note: each files and directories you've saved using the ynh_backup helper +# will be located in the current directory, regarding the last argument. + +# Exit on command errors and treat unset variables as an error +set -eu + +# See comments in install script +app=$YNH_APP_INSTANCE_NAME + +# Source YunoHost helpers +source /usr/share/yunohost/helpers + +# Retrieve old app settings +domain=$(ynh_app_setting_get "$app" domain) +path_url=$(ynh_app_setting_get "$app" path_url) + +# Check domain/path availability +sudo yunohost app checkurl "${domain}${path_url}" -a "$app" \ + || ynh_die "Path not available: ${domain}${path_url}" + +# Restore sources & data +src_path="/var/www/${app}" +sudo cp -a ./sources "$src_path" + +# Restore permissions to app files +# you may need to make some file and/or directory writeable by www-data (nginx user) +sudo chown -R root: "$src_path" + +### MySQL (remove if not used) ### +# If a MySQL database is used: +# # Create and restore the database +# dbname=$app +# dbuser=$app +# dbpass=$(ynh_app_setting_get "$app" mysqlpwd) +# ynh_mysql_create_db "$dbname" "$dbuser" "$dbpass" +# ynh_mysql_connect_as "$dbuser" "$dbpass" "$dbname" < ./dump.sql +### MySQL end ### + +# Restore NGINX configuration +sudo cp -a ./nginx.conf "/etc/nginx/conf.d/${domain}.d/${app}.conf" + +### PHP (remove if not used) ### +# If a dedicated php-fpm process is used: +# # Copy PHP-FPM pool configuration and reload the service +# sudo cp -a ./php-fpm.conf "/etc/php5/fpm/pool.d/${app}.conf" +# sudo service php5-fpm reload +### PHP end ### + +# Restart webserver +sudo service nginx reload diff --git a/scripts/upgrade b/scripts/upgrade new file mode 100644 index 0000000..3ad3f7a --- /dev/null +++ b/scripts/upgrade @@ -0,0 +1,56 @@ +#!/bin/bash + +# Exit on command errors and treat unset variables as an error +set -eu + +# See comments in install script +app=$YNH_APP_INSTANCE_NAME +final_path=/opt/yunohost/$app + +# Source YunoHost helpers +source /usr/share/yunohost/helpers + +# Stop emby-server service +systemctl stop emby-server + +#================================================= +# DOWNLOAD, CHECK AND UNPACK SOURCE +#================================================= + +ynh_app_setting_set $app final_path $final_path +# Download, check integrity, uncompress and patch the source from app.src +ynh_setup_source "$final_path" + +#============================================== +# INSTALL PLEX +#============================================== + +dpkg --install $final_path/emby-server-deb* + +#================================================= +# NGINX CONFIGURATION +#================================================= + +# Create a dedicated nginx config +#ynh_add_nginx_config + + +#================================================= +# UPGRADE CONFIG +#================================================= +#cp -a ../conf/loolwsd.xml /etc/loolwsd +#ynh_replace_string "__NEXTCLOUDDOMAIN__" "$nextcloud_domain" "/etc/loolwsd/loolwsd.xml" +#ynh_replace_string "__PASSWORD__" "$password" "/etc/loolwsd/loolwsd.xml" +#systemctl restart loolwsd + + + +# If app is public, add url to SSOWat conf as skipped_uris +#if [[ $is_public -eq 1 ]]; then + # See install script +# ynh_app_setting_set "$app" unprotected_uris "/" +#fi + +# Start emby-server service +systemctl start emby-server +