Merge pull request #14 from YunoHost-Apps/testing

- Level 6
- Apply example_ynh

.github/ISSUE_TEMPLATE.md

@@ -0,0 +1,55 @@
+---
+name: Bug report
+about: When creating a bug report, please use the following template to provide all the relevant information and help debugging efficiently.
+
+---
+
+**How to post a meaningful bug report**
+1. *Read this whole template first.*
+2. *Determine if you are on the right place:*
+   - *If you were performing an action on the app from the webadmin or the CLI (install, update, backup, restore, change_url...), you are on the right place!*
+   - *Otherwise, the issue may be due to the app itself. Refer to its documentation or repository for help.*
+   - *When in doubt, post here and we will figure it out together.*
+3. *Delete the italic comments as you write over them below, and remove this guide.*
+--- 
+
+### Describe the bug
+
+*A clear and concise description of what the bug is.*
+
+### Context
+
+- Hardware: *VPS bought online / Old laptop or computer / Raspberry Pi at home / Internet Cube with VPN / Other ARM board / ...*
+- YunoHost version: x.x.x
+- I have access to my server: *Through SSH | through the webadmin | direct access via keyboard / screen | ...*
+- Are you in a special context or did you perform some particular tweaking on your YunoHost instance?: *no / yes*
+  - If yes, please explain:
+- Using, or trying to install package version/branch:
+- If upgrading, current package version: *can be found in the admin, or with `yunohost app info $app_id`*
+
+### Steps to reproduce
+
+- *If you performed a command from the CLI, the command itself is enough. For example:*
+    ```sh
+    sudo yunohost app install the_app
+    ```
+- *If you used the webadmin, please perform the equivalent command from the CLI first.*
+- *If the error occurs in your browser, explain what you did:*
+   1. *Go to '...'*
+   2. *Click on '...'*
+   3. *Scroll down to '...'*
+   4. *See error*
+
+### Expected behavior
+
+*A clear and concise description of what you expected to happen. You can remove this section if the command above is enough to understand your intent.*
+
+### Logs
+
+*When an operation fails, YunoHost provides a simple way to share the logs.*
+- *In the webadmin, the error message contains a link to the relevant log page. On that page, you will be able to 'Share with Yunopaste'. If you missed it, the logs of previous operations are also available under Tools > Logs.*
+- *In command line, the command to share the logs is displayed at the end of the operation and looks like `yunohost log display [log name] --share`. If you missed it, you can find the log ID of a previous operation using `yunohost log list`.*
+
+*After sharing the log, please copypaste directly the link provided by YunoHost (to help readability, no need to copypaste the entire content of the log here, just the link is enough...)*
+
+*If applicable and useful, add screenshots to help explain your problem.*

.github/PULL_REQUEST_TEMPLATE.md

@@ -0,0 +1,16 @@
+## Problem
+
+- *Description of why you made this PR*
+
+## Solution
+
+- *And how do you fix that problem*
+
+## PR Status
+
+- [ ] Code finished and ready to be reviewed/tested
+- [ ] The fix/enhancement were manually tested (if applicable)
+
+## Automatic tests
+
+Automatic tests can be triggered on https://ci-apps-dev.yunohost.org/ *after creating the PR*, by commenting "!testme", "!gogogadgetoci" or "By the power of systemd, I invoke The Great App CI to test this Pull Request!". (N.B. : for this to work you need to be a member of the Yunohost-Apps organization)

README.md

@@ -11,7 +11,7 @@ If you don't have YunoHost, please see [here](https://yunohost.org/#/install) to
 
 A customizable PHP script that displays information about your system nicely.
 
-**Shipped version:** 3.3.2
+**Shipped version:** 3.3.4
 **License:** [GNU General Public License v2.0](https://github.com/phpsysinfo/phpsysinfo/blob/master/COPYING)
 
 ## Screenshots

check_process

@@ -1,10 +1,10 @@
 ;; Test complet
 	; Manifest
-		domain="domain.tld"	(DOMAIN)
+		domain="domain.tld"
-		path="/path"	(PATH)
+		path="/path"
-		admin="john"	(USER)
+		admin="john"
-		is_public=1	(PUBLIC|public=1|private=0)
 		language="fr"
+		is_public=1
 		display_mode="bootstrap"
 	; Checks
 		pkg_linter=1
@@ -14,13 +14,15 @@
 		setup_private=1
 		setup_public=1
 		upgrade=1
+		# 3.3.2~ynh2
+		upgrade=1	from_commit=1db39f122a3e17d708526e8b98d7e885c6bafd12
 		backup_restore=1
 		multi_instance=1
 		port_already_use=0
 		change_url=1
-;;; Levels
-	# If the level 5 (Package linter) is forced to 1. Please add justifications here.
-	Level 5=auto
 ;;; Options
 Email=
-Notification=all
+Notification=all
+;;; Upgrade options
+	; commit=1db39f122a3e17d708526e8b98d7e885c6bafd12
+		name=3.3.2~ynh2

conf/app.src

@@ -1,6 +1,7 @@
-SOURCE_URL=https://github.com/phpsysinfo/phpsysinfo/archive/v3.3.2.tar.gz
+SOURCE_URL=https://github.com/phpsysinfo/phpsysinfo/archive/v3.3.4.tar.gz
-SOURCE_SUM=C13A3F12DC7E5FBC71A7B12645F2F08D
+SOURCE_SUM=5a0c880519df3c61b1c97c7bbb8c349dc2dde4f25e506478a0a643e47d25ff5e
-SOURCE_SUM_PRG=md5sum
+SOURCE_SUM_PRG=sha256sum
 ARCH_FORMAT=tar.gz
 SOURCE_IN_SUBDIR=true
-SOURCE_FILENAME=
+SOURCE_FILENAME=
+SOURCE_EXTRACT=true

conf/nginx.conf

@@ -9,7 +9,6 @@ location __PATH__/ {
     rewrite ^ https://$server_name$request_uri? permanent;
   }
 
-### Example PHP configuration (remove it if not used)
   index index.php;
 
   # Common parameter to increase upload size limit in conjunction with dedicated php-fpm file
@@ -18,7 +17,7 @@ location __PATH__/ {
   try_files $uri $uri/ index.php;
   location ~ [^/]\.php(/|$) {
     fastcgi_split_path_info ^(.+?\.php)(/.*)$;
-    fastcgi_pass unix:/var/run/php/php7.0-fpm-__NAME__.sock;
+    fastcgi_pass unix:/var/run/php/php__PHPVERSION__-fpm-__NAME__.sock;
 
     fastcgi_index index.php;
     include fastcgi_params;
@@ -26,8 +25,7 @@ location __PATH__/ {
     fastcgi_param PATH_INFO $fastcgi_path_info;
     fastcgi_param SCRIPT_FILENAME $request_filename;
   }
-### End of PHP configuration part
 
   # Include SSOWAT user panel.
   include conf.d/yunohost_panel.conf.inc;
-}
+}

conf/php-fpm.conf

@@ -33,7 +33,7 @@ group = __USER__
 ;                            (IPv6 and IPv4-mapped) on a specific port;
 ;   '/path/to/unix/socket' - to listen on a unix socket.
 ; Note: This value is mandatory.
-listen = /var/run/php/php7.0-fpm-__NAMETOCHANGE__.sock
+listen = /var/run/php/php__PHPVERSION__-fpm-__NAMETOCHANGE__.sock
 
 ; Set listen(2) backlog.
 ; Default Value: 511 (-1 on FreeBSD and OpenBSD)

manifest.json

@@ -6,7 +6,7 @@
         "en": "A customizable PHP script that displays information about your system nicely.",
         "fr": "Un script PHP paramétrable qui affiche des informations sur votre système."
     },
-    "version": "3.3.2~ynh2",
+    "version": "3.3.4~ynh1",
     "url": "https://github.com/inrepublica/phpsysinfo_ynh/",
     "license": "GPL-3.0-only",
     "maintainer": {
@@ -14,41 +14,29 @@
         "email": "duvalmickael@gmail.com"
     },
     "requirements": {
-        "yunohost": ">= 3.6.5"
+        "yunohost": ">= 4.1.0"
     },
     "multi_instance": true,
     "services": [
         "nginx",
-        "php7.0-fpm"
+        "php7.3-fpm"
     ],
     "arguments": {
         "install" : [
             {
                 "name": "domain",
                 "type": "domain",
-                "ask": {
-                    "en": "Choose a domain for PhpSysInfo",
-                    "fr": "Choisissez un domaine pour PhpSysInfo"
-                },
                 "example": "domain.org"
             },
             {
                 "name": "path",
                 "type": "path",
-                "ask": {
-                    "en": "Choose a path for PhpSysInfo",
-                    "fr": "Choisissez un chemin pour PhpSysInfo"
-                },
                 "example": "/phpsysinfo",
                 "default": "/phpsysinfo"
             },
 			{
                 "name": "admin",
                 "type": "user",
-                "ask": {
-                    "en": "Choose an admin user",
-                    "fr": "Choisissez l’administrateur"
-                },
                 "example": "johndoe"
             },
             {
@@ -58,18 +46,14 @@
 					"en": "Be careful, putting this application in public will expose some sensitive information.",
 					"fr": "Attention mettre cette application en publique exposera certaines informations sensibles."
 				},
-                "ask": {
-                    "en": "Is it a public website?",
-                    "fr": "Est-ce un site public ?"
-                },
                 "default": false
             },
 			{
                 "name": "language",
 				"type": "string",
                 "ask": {
-                    "en": "Default Language?",
+                    "en": "Choose the application language",
-                    "fr": "Langue par défaut ?"
+                    "fr": "Choisissez la langue de l'application"
                 },
                 "choices": ["ast", "bg", "ca", "cz", "da", "de", "en", "es", "et", "fi", "fr", "gl", "gr", "he", "hu", "is", "it", "ja", "ko", "nl", "no", "pl", "pt-br", "pt-pt", "ro", "ru", "sk", "sl", "sv", "th", "tr", "tw", "uk", "zh"],
                 "default": "en"

scripts/_common.sh

@@ -14,4 +14,4 @@
 
 #=================================================
 # FUTURE OFFICIAL HELPERS
-#=================================================
+#=================================================

scripts/backup

@@ -6,7 +6,7 @@
 # IMPORT GENERIC HELPERS
 #=================================================
 
-#Keep this path for calling _common.sh inside the execution's context of backup and restore scripts
+# Keep this path for calling _common.sh inside the execution's context of backup and restore scripts
 source ../settings/scripts/_common.sh
 source /usr/share/yunohost/helpers
 
@@ -15,7 +15,6 @@ source /usr/share/yunohost/helpers
 #=================================================
 
 ynh_clean_setup () {
-	### Remove this function if there's nothing to clean before calling the remove script.
 	true
 }
 # Exit if an error occurs during the execution of the script
@@ -24,38 +23,39 @@ ynh_abort_if_errors
 #=================================================
 # LOAD SETTINGS
 #=================================================
-ynh_script_progression --message="Loading installation settings..." --time --weight=1
+ynh_print_info --message="Loading installation settings..."
 
 app=$YNH_APP_INSTANCE_NAME
 
 final_path=$(ynh_app_setting_get --app=$app --key=final_path)
 domain=$(ynh_app_setting_get --app=$app --key=domain)
+phpversion=$(ynh_app_setting_get --app=$app --key=phpversion)
 
 #=================================================
-# STANDARD BACKUP STEPS
+# DECLARE DATA AND CONF FILES TO BACKUP
+#=================================================
+ynh_print_info --message="Declaring files to be backed up..."
+
 #=================================================
 # BACKUP THE APP MAIN DIR
 #=================================================
-ynh_script_progression --message="Backing up the main app directory..." --time --weight=1
 
 ynh_backup --src_path="$final_path"
 
 #=================================================
 # BACKUP THE NGINX CONFIGURATION
 #=================================================
-ynh_script_progression --message="Backing up nginx web server configuration..." --time --weight=1
 
 ynh_backup --src_path="/etc/nginx/conf.d/$domain.d/$app.conf"
 
 #=================================================
 # BACKUP THE PHP-FPM CONFIGURATION
 #=================================================
-ynh_script_progression --message="Backing up php-fpm configuration..." --time --weight=1
 
-ynh_backup --src_path="/etc/php/7.0/fpm/pool.d/$app.conf"
+ynh_backup --src_path="/etc/php/$phpversion/fpm/pool.d/$app.conf"
 
 #=================================================
 # END OF SCRIPT
 #=================================================
 
-ynh_script_progression --message="Backup script completed for $app. (YunoHost will then actually copy those files to the archive)." --time --last
+ynh_print_info --message="Backup script completed for $app. (YunoHost will then actually copy those files to the archive)."

scripts/change_url

@@ -24,15 +24,15 @@ app=$YNH_APP_INSTANCE_NAME
 #=================================================
 # LOAD SETTINGS
 #=================================================
-ynh_script_progression --message="Loading installation settings..." --time --weight=1
+ynh_script_progression --message="Loading installation settings..."
 
 # Needed for helper "ynh_add_nginx_config"
 final_path=$(ynh_app_setting_get --app=$app --key=final_path)
 
 #=================================================
-# BACKUP BEFORE UPGRADE THEN ACTIVE TRAP
+# BACKUP BEFORE CHANGE URL THEN ACTIVE TRAP
 #=================================================
-ynh_script_progression --message="Backing up the app before changing its url (may take a while)..." --time --weight=1
+ynh_script_progression --message="Backing up the app before changing its URL (may take a while)..."
 
 # Backup the current version of the app
 ynh_backup_before_upgrade
@@ -40,7 +40,7 @@ ynh_clean_setup () {
 	# Remove the new domain config file, the remove script won't do it as it doesn't know yet its location.
 	ynh_secure_remove --file="/etc/nginx/conf.d/$new_domain.d/$app.conf"
 
-	# restore it if the upgrade fails
+	# Restore it if the upgrade fails
 	ynh_restore_upgradebackup
 }
 # Exit if an error occurs during the execution of the script
@@ -67,23 +67,23 @@ fi
 #=================================================
 # MODIFY URL IN NGINX CONF
 #=================================================
-ynh_script_progression --message="Updating nginx web server configuration..." --time --weight=1
+ynh_script_progression --message="Updating NGINX web server configuration..."
 
 nginx_conf_path=/etc/nginx/conf.d/$old_domain.d/$app.conf
 
-# Change the path in the nginx config file
+# Change the path in the NGINX config file
 if [ $change_path -eq 1 ]
 then
-	# Make a backup of the original nginx config file if modified
+	# Make a backup of the original NGINX config file if modified
 	ynh_backup_if_checksum_is_different --file="$nginx_conf_path"
-	# Set global variables for nginx helper
+	# Set global variables for NGINX helper
 	domain="$old_domain"
 	path_url="$new_path"
-	# Create a dedicated nginx config
+	# Create a dedicated NGINX config
 	ynh_add_nginx_config
 fi
 
-# Change the domain for nginx
+# Change the domain for NGINX
 if [ $change_domain -eq 1 ]
 then
 	# Delete file checksum for the old conf file location
@@ -98,7 +98,7 @@ fi
 #=================================================
 # RELOAD NGINX
 #=================================================
-ynh_script_progression --message="Reloading nginx web server..." --time --weight=1
+ynh_script_progression --message="Reloading NGINX web server..."
 
 ynh_systemd_action --service_name=nginx --action=reload
 
@@ -106,4 +106,4 @@ ynh_systemd_action --service_name=nginx --action=reload
 # END OF SCRIPT
 #=================================================
 
-ynh_script_progression --message="Change of URL completed for $app" --time --last
+ynh_script_progression --message="Change of URL completed for $app"

scripts/install

@@ -14,7 +14,6 @@ source /usr/share/yunohost/helpers
 #=================================================
 
 ynh_clean_setup () {
-	### Remove this function if there's nothing to clean before calling the remove script.
 	true
 }
 # Exit if an error occurs during the execution of the script
@@ -31,33 +30,13 @@ is_public=$YNH_APP_ARG_IS_PUBLIC
 language=$YNH_APP_ARG_LANGUAGE
 display_mode=$YNH_APP_ARG_DISPLAY_MODE
 
-### If it's a multi-instance app, meaning it can be installed several times independently
-### The id of the app as stated in the manifest is available as $YNH_APP_ID
-### The instance number is available as $YNH_APP_INSTANCE_NUMBER (equals "1", "2", ...)
-### The app instance name is available as $YNH_APP_INSTANCE_NAME
-###    - the first time the app is installed, YNH_APP_INSTANCE_NAME = ynhexample
-###    - the second time the app is installed, YNH_APP_INSTANCE_NAME = ynhexample__2
-###    - ynhexample__{N} for the subsequent installations, with N=3,4, ...
-### The app instance name is probably what interests you most, since this is
-### guaranteed to be unique. This is a good unique identifier to define installation path,
-### db names, ...
 app=$YNH_APP_INSTANCE_NAME
 
 #=================================================
 # CHECK IF THE APP CAN BE INSTALLED WITH THESE ARGS
 #=================================================
-### About --weight and --time
+ynh_script_progression --message="Validating installation parameters..."
-### ynh_script_progression will show to your final users the progression of each scripts.
-### In order to do that, --weight will represent the relative time of execution compared to the other steps in the script.
-### --time is a packager option, it will show you the execution time since the previous call.
-### This option should be removed before releasing your app.
-### Use the execution time, given by --time, to estimate the weight of a step.
-### A common way to do it is to set a weight equal to the execution time in second +1.
-### The execution time is given for the duration since the previous call. So the weight should be applied to this previous call.
-ynh_script_progression --message="Validating installation parameters..." --time --weight=1
 
-### If the app uses nginx as web server (written in HTML/PHP in most cases), the final path should be "/var/www/$app".
-### If the app provides an internal web server (or uses another application server such as uwsgi), the final path should be "/opt/yunohost/$app"
 final_path=/var/www/$app
 test ! -e "$final_path" || ynh_die --message="This path already contains a folder"
 
@@ -67,75 +46,59 @@ ynh_webpath_register --app=$app --domain=$domain --path_url=$path_url
 #=================================================
 # STORE SETTINGS FROM MANIFEST
 #=================================================
-ynh_script_progression --message="Storing installation settings..." --time --weight=1
+ynh_script_progression --message="Storing installation settings..."
 
 ynh_app_setting_set --app=$app --key=domain --value=$domain
 ynh_app_setting_set --app=$app --key=path --value=$path_url
 ynh_app_setting_set --app=$app --key=admin --value=$admin
-ynh_app_setting_set --app=$app --key=is_public --value=$is_public
 ynh_app_setting_set --app=$app --key=language --value=$language
 ynh_app_setting_set --app=$app --key=display_mode --value=$display_mode
 
 #=================================================
 # STANDARD MODIFICATIONS
+#=================================================
+# CREATE DEDICATED USER
+#=================================================
+ynh_script_progression --message="Configuring system user..."
+
+# Create a system user
+ynh_system_user_create --username=$app --home_dir=$final_path
+
 #=================================================
 # DOWNLOAD, CHECK AND UNPACK SOURCE
 #=================================================
-ynh_script_progression --message="Setting up source files..." --time --weight=1
+ynh_script_progression --message="Setting up source files..."
-
-### `ynh_setup_source` is used to install an app from a zip or tar.gz file,
-### downloaded from an upstream source, like a git repository.
-### `ynh_setup_source` use the file conf/app.src
 
 ynh_app_setting_set --app=$app --key=final_path --value=$final_path
 # Download, check integrity, uncompress and patch the source from app.src
 ynh_setup_source --dest_dir="$final_path"
 
+chmod 750 "$final_path"
+chmod -R o-rwx "$final_path"
+chown -R $app:www-data "$final_path"
+
 #=================================================
 # NGINX CONFIGURATION
 #=================================================
-ynh_script_progression --message="Configuring nginx web server..." --time --weight=1
+ynh_script_progression --message="Configuring NGINX web server..."
 
-### `ynh_add_nginx_config` will use the file conf/nginx.conf
+# Create a dedicated NGINX config
-
-# Create a dedicated nginx config
 ynh_add_nginx_config
 
-#=================================================
-# CREATE DEDICATED USER
-#=================================================
-ynh_script_progression --message="Configuring system user..." --time --weight=1
-
-# Create a system user
-ynh_system_user_create --username=$app
-
 #=================================================
 # PHP-FPM CONFIGURATION
 #=================================================
-ynh_script_progression --message="Configuring php-fpm..." --time --weight=1
+ynh_script_progression --message="Configuring PHP-FPM..."
 
-### `ynh_add_fpm_config` is used to set up a PHP config.
+# Create a dedicated PHP-FPM config
-### You can remove it if your app doesn't use PHP.
-### `ynh_add_fpm_config` will use the files conf/php-fpm.conf
-### If you're not using these lines:
-###		- You can remove these files in conf/.
-###		- Remove the section "BACKUP THE PHP-FPM CONFIGURATION" in the backup script
-###		- Remove also the section "REMOVE PHP-FPM CONFIGURATION" in the remove script
-###		- As well as the section "RESTORE THE PHP-FPM CONFIGURATION" in the restore script
-###		With the reload at the end of the script.
-###		- And the section "PHP-FPM CONFIGURATION" in the upgrade script
-
-# Create a dedicated php-fpm config
 ynh_add_fpm_config
 
 #=================================================
 # SPECIFIC SETUP
 #=================================================
-# MODIFY A CONFIG FILE
+# ADD A CONFIGURATION
 #=================================================
-
+ynh_script_progression --message="Adding a configuration file..."
-### `ynh_replace_string` is used to replace a string in a file.
-### (It's compatible with sed regular expressions syntax)
 
 ynh_replace_string --match_string="DEFAULT_LANG=\"en\"" --replace_string="DEFAULT_LANG=\"$language\"" --target_file="$final_path/phpsysinfo.ini.new"
 ynh_replace_string --match_string="DEFAULT_DISPLAY_MODE=\"auto\"" --replace_string="DEFAULT_DISPLAY_MODE=\"$display_mode\"" --target_file="$final_path/phpsysinfo.ini.new"
@@ -143,46 +106,28 @@ ynh_replace_string --match_string="DEFAULT_DISPLAY_MODE=\"auto\"" --replace_stri
 ### Rename phpsysinfo.ini.new in phpsysinfo.ini
 mv "$final_path"/phpsysinfo.ini.new "$final_path"/phpsysinfo.ini
 
-#=================================================
-# STORE THE CONFIG FILE CHECKSUM
-#=================================================
-
-### `ynh_store_file_checksum` is used to store the checksum of a file.
-### That way, during the upgrade script, by using `ynh_backup_if_checksum_is_different`,
-### you can make a backup of this file before modifying it again if the admin had modified it.
-
 # Calculate and store the config file checksum into the app settings
 ynh_store_file_checksum --file="$final_path/phpsysinfo.ini"
 
 #=================================================
 # GENERIC FINALIZATION
-#=================================================
-# SECURE FILES AND DIRECTORIES
-#=================================================
-
-### For security reason, any app should set the permissions to root: before anything else.
-### Then, if write authorization is needed, any access should be given only to directories
-### that really need such authorization.
-
-# Set permissions to app files
-chown -R root: $final_path
-
 #=================================================
 # SETUP SSOWAT
 #=================================================
-ynh_script_progression --message="Configuring SSOwat..." --time --weight=1
+ynh_script_progression --message="Configuring permissions..."
 
 # Make app public if necessary
 if [ $is_public -eq 1 ]
 then
-	# unprotected_uris allows SSO credentials to be passed anyway.
+	# Everyone can access the app.
-	ynh_app_setting_set --app=$app --key=unprotected_uris --value="/"
+	# The "main" permission is automatically created before the install script.
+	ynh_permission_update --permission="main" --add="visitors"
 fi
 
 #=================================================
 # RELOAD NGINX
 #=================================================
-ynh_script_progression --message="Reloading nginx web server..." --time --weight=1
+ynh_script_progression --message="Reloading NGINX web server..."
 
 ynh_systemd_action --service_name=nginx --action=reload
 
@@ -190,4 +135,4 @@ ynh_systemd_action --service_name=nginx --action=reload
 # END OF SCRIPT
 #=================================================
 
-ynh_script_progression --message="Installation of $app completed" --time --last
+ynh_script_progression --message="Installation of $app completed"

scripts/remove

@@ -12,7 +12,7 @@ source /usr/share/yunohost/helpers
 #=================================================
 # LOAD SETTINGS
 #=================================================
-ynh_script_progression --message="Loading installation settings..." --time --weight=1
+ynh_script_progression --message="Loading installation settings..."
 
 app=$YNH_APP_INSTANCE_NAME
 
@@ -24,7 +24,7 @@ final_path=$(ynh_app_setting_get --app=$app --key=final_path)
 #=================================================
 # REMOVE APP MAIN DIR
 #=================================================
-ynh_script_progression --message="Removing app main directory..." --time --weight=1
+ynh_script_progression --message="Removing app main directory..."
 
 # Remove the app directory securely
 ynh_secure_remove --file="$final_path"
@@ -32,17 +32,17 @@ ynh_secure_remove --file="$final_path"
 #=================================================
 # REMOVE NGINX CONFIGURATION
 #=================================================
-ynh_script_progression --message="Removing nginx web server configuration..." --time --weight=1
+ynh_script_progression --message="Removing NGINX web server configuration..."
 
-# Remove the dedicated nginx config
+# Remove the dedicated NGINX config
 ynh_remove_nginx_config
 
 #=================================================
 # REMOVE PHP-FPM CONFIGURATION
 #=================================================
-ynh_script_progression --message="Removing php-fpm configuration..." --time --weight=1
+ynh_script_progression --message="Removing PHP-FPM configuration..."
 
-# Remove the dedicated php-fpm config
+# Remove the dedicated PHP-FPM config
 ynh_remove_fpm_config
 
 #=================================================
@@ -50,7 +50,7 @@ ynh_remove_fpm_config
 #=================================================
 # REMOVE DEDICATED USER
 #=================================================
-ynh_script_progression --message="Removing the dedicated system user..." --time --weight=1
+ynh_script_progression --message="Removing the dedicated system user..."
 
 # Delete a system user
 ynh_system_user_delete --username=$app
@@ -59,4 +59,4 @@ ynh_system_user_delete --username=$app
 # END OF SCRIPT
 #=================================================
 
-ynh_script_progression --message="Removal of $app completed" --time --last
+ynh_script_progression --message="Removal of $app completed"

scripts/restore

@@ -6,7 +6,7 @@
 # IMPORT GENERIC HELPERS
 #=================================================
 
-#Keep this path for calling _common.sh inside the execution's context of backup and restore scripts
+# Keep this path for calling _common.sh inside the execution's context of backup and restore scripts
 source ../settings/scripts/_common.sh
 source /usr/share/yunohost/helpers
 
@@ -15,7 +15,6 @@ source /usr/share/yunohost/helpers
 #=================================================
 
 ynh_clean_setup () {
-	#### Remove this function if there's nothing to clean before calling the remove script.
 	true
 }
 # Exit if an error occurs during the execution of the script
@@ -24,18 +23,19 @@ ynh_abort_if_errors
 #=================================================
 # LOAD SETTINGS
 #=================================================
-ynh_script_progression --message="Loading settings..." --time --weight=1
+ynh_script_progression --message="Loading installation settings..."
 
 app=$YNH_APP_INSTANCE_NAME
 
 domain=$(ynh_app_setting_get --app=$app --key=domain)
 path_url=$(ynh_app_setting_get --app=$app --key=path)
 final_path=$(ynh_app_setting_get --app=$app --key=final_path)
+phpversion=$(ynh_app_setting_get --app=$app --key=phpversion)
 
 #=================================================
 # CHECK IF THE APP CAN BE RESTORED
 #=================================================
-ynh_script_progression --message="Validating restoration parameters..." --time --weight=1
+ynh_script_progression --message="Validating restoration parameters..."
 
 ynh_webpath_available --domain=$domain --path_url=$path_url \
 	|| ynh_die --message="Path not available: ${domain}${path_url}"
@@ -47,49 +47,48 @@ test ! -d $final_path \
 #=================================================
 # RESTORE THE NGINX CONFIGURATION
 #=================================================
+ynh_script_progression --message="Restoring the NGINX configuration..."
 
 ynh_restore_file --origin_path="/etc/nginx/conf.d/$domain.d/$app.conf"
 
+#=================================================
+# RECREATE THE DEDICATED USER
+#=================================================
+ynh_script_progression --message="Recreating the dedicated system user..."
+
+# Create the dedicated user (if not existing)
+ynh_system_user_create --username=$app --home_dir=$final_path
+
 #=================================================
 # RESTORE THE APP MAIN DIR
 #=================================================
-ynh_script_progression --message="Restoring the app main directory..." --time --weight=1
+ynh_script_progression --message="Restoring the app main directory..."
 
 ynh_restore_file --origin_path="$final_path"
 
-#=================================================
+chmod 750 "$final_path"
-# RECREATE THE DEDICATED USER
+chmod -R o-rwx "$final_path"
-#=================================================
+chown -R $app:www-data "$final_path"
-ynh_script_progression --message="Recreating the dedicated system user..." --time --weight=1
-
-# Create the dedicated user (if not existing)
-ynh_system_user_create --username=$app
-
-#=================================================
-# RESTORE USER RIGHTS
-#=================================================
-
-# Restore permissions on app files
-chown -R root: $final_path
 
 #=================================================
 # RESTORE THE PHP-FPM CONFIGURATION
 #=================================================
+ynh_script_progression --message="Restoring the PHP-FPM configuration..."
 
-ynh_restore_file --origin_path="/etc/php/7.0/fpm/pool.d/$app.conf"
+ynh_restore_file --origin_path="/etc/php/$phpversion/fpm/pool.d/$app.conf"
 
 #=================================================
 # GENERIC FINALIZATION
 #=================================================
 # RELOAD NGINX AND PHP-FPM
 #=================================================
-ynh_script_progression --message="Reloading nginx web server and php-fpm..." --time --weight=1
+ynh_script_progression --message="Reloading NGINX web server and PHP-FPM..."
 
-ynh_systemd_action --service_name=php7.0-fpm --action=reload
+ynh_systemd_action --service_name=php$phpversion-fpm --action=reload
 ynh_systemd_action --service_name=nginx --action=reload
 
 #=================================================
 # END OF SCRIPT
 #=================================================
 
-ynh_script_progression --message="Restoration completed for $app" --time --last
+ynh_script_progression --message="Restoration completed for $app"

scripts/upgrade

@@ -12,7 +12,7 @@ source /usr/share/yunohost/helpers
 #=================================================
 # LOAD SETTINGS
 #=================================================
-ynh_script_progression --message="Loading installation settings..." --time --weight=1
+ynh_script_progression --message="Loading installation settings..."
 
 app=$YNH_APP_INSTANCE_NAME
 
@@ -27,19 +27,30 @@ display_mode=$(ynh_app_setting_get --app=$app --key=display_mode)
 #=================================================
 # CHECK VERSION
 #=================================================
+ynh_script_progression --message="Checking version..."
 
-### This helper will compare the version of the currently installed app and the version of the upstream package.
-### $upgrade_type can have 2 different values
-### - UPGRADE_APP if the upstream app version has changed
-### - UPGRADE_PACKAGE if only the YunoHost package has changed
-### ynh_check_app_version_changed will stop the upgrade if the app is up to date.
-### UPGRADE_APP should be used to upgrade the core app only if there's an upgrade to do.
 upgrade_type=$(ynh_check_app_version_changed)
 
+#=================================================
+# BACKUP BEFORE UPGRADE THEN ACTIVE TRAP
+#=================================================
+ynh_script_progression --message="Backing up the app before upgrading (may take a while)..."
+
+# Backup the current version of the app
+ynh_backup_before_upgrade
+ynh_clean_setup () {
+	# Restore it if the upgrade fails
+	ynh_restore_upgradebackup
+}
+# Exit if an error occurs during the execution of the script
+ynh_abort_if_errors
+
+#=================================================
+# STANDARD UPGRADE STEPS
 #=================================================
 # ENSURE DOWNWARD COMPATIBILITY
 #=================================================
-ynh_script_progression --message="Ensuring downward compatibility..." --time --weight=1
+ynh_script_progression --message="Ensuring downward compatibility..."
 
 # Fix is_public as a boolean value
 if [ "$is_public" = "Yes" ]; then
@@ -56,41 +67,28 @@ if [ -z "$final_path" ]; then
 	ynh_app_setting_set --app=$app --key=final_path --value=$final_path
 fi
 
-#=================================================
+# Cleaning legacy permissions
-# BACKUP BEFORE UPGRADE THEN ACTIVE TRAP
+if ynh_legacy_permissions_exists; then
-#=================================================
+	ynh_legacy_permissions_delete_all
-ynh_script_progression --message="Backing up the app before upgrading (may take a while)..." --time --weight=1
 
-# Backup the current version of the app
+	ynh_app_setting_delete --app=$app --key=is_public
-ynh_backup_before_upgrade
+fi
-ynh_clean_setup () {
-	# restore it if the upgrade fails
-	ynh_restore_upgradebackup
-}
-# Exit if an error occurs during the execution of the script
-ynh_abort_if_errors
 
 #=================================================
-# CHECK THE PATH
+# CREATE DEDICATED USER
 #=================================================
+ynh_script_progression --message="Making sure dedicated system user exists..."
 
-# Normalize the URL path syntax
+# Create a dedicated user (if not existing)
-# N.B. : this is for app installations before YunoHost 2.7
+ynh_system_user_create --username=$app --home_dir=$final_path
-# where this value might be something like /foo/ or foo/
-# instead of /foo ....
-# If nobody installed your app before 2.7, then you may
-# safely remove this line
-path_url=$(ynh_normalize_url_path --path_url=$path_url)
 
-#=================================================
-# STANDARD UPGRADE STEPS
 #=================================================
 # DOWNLOAD, CHECK AND UNPACK SOURCE
 #=================================================
 
 if [ "$upgrade_type" == "UPGRADE_APP" ]
 then
-	ynh_script_progression --message="Upgrading source files..." --time --weight=1
+	ynh_script_progression --message="Upgrading source files..."
 
 	# Download, check integrity, uncompress and patch the source from app.src
 	ynh_setup_source --dest_dir="$final_path"
@@ -99,42 +97,28 @@ fi
 #=================================================
 # NGINX CONFIGURATION
 #=================================================
-ynh_script_progression --message="Upgrading nginx web server configuration..." --time --weight=1
+ynh_script_progression --message="Upgrading NGINX web server configuration..."
 
-# Create a dedicated nginx config
+# Create a dedicated NGINX config
 ynh_add_nginx_config
 
-#=================================================
-# CREATE DEDICATED USER
-#=================================================
-ynh_script_progression --message="Making sure dedicated system user exists..." --time --weight=1
-
-# Create a dedicated user (if not existing)
-ynh_system_user_create --username=$app
-
 #=================================================
 # PHP-FPM CONFIGURATION
 #=================================================
-ynh_script_progression --message="Upgrading php-fpm configuration..." --time --weight=1
+ynh_script_progression --message="Upgrading PHP-FPM configuration..."
 
-# Create a dedicated php-fpm config
+# Create a dedicated PHP-FPM config
 ynh_add_fpm_config
 
 #=================================================
 # SPECIFIC UPGRADE
 #=================================================
-# STORE THE CONFIG FILE CHECKSUM
+# UPDATE A CONFIG FILE
 #=================================================
+ynh_script_progression --message="Updating a configuration file..."
 
-### Verify the checksum of a file, stored by `ynh_store_file_checksum` in the install script.
-### And create a backup of this file if the checksum is different. So the file will be backed up if the admin had modified it.
 ynh_backup_if_checksum_is_different --file="$final_path/phpsysinfo.ini"
-# Recalculate and store the checksum of the file for the next upgrade.
-ynh_store_file_checksum --file="$final_path/phpsysinfo.ini"
 
-#=================================================
-# CONFIGURE PHPSYSINFO
-#=================================================
 if [ "$upgrade_type" == "UPGRADE_APP" ]
 then
 	ynh_script_progression --message="Reconfiguring Phpsysinfo..." --weight=11
@@ -146,31 +130,15 @@ then
 	mv "$final_path"/phpsysinfo.ini.new "$final_path"/phpsysinfo.ini
 fi
 
+# Recalculate and store the checksum of the file for the next upgrade.
+ynh_store_file_checksum --file="$final_path/phpsysinfo.ini"
+
 #=================================================
 # GENERIC FINALIZATION
-#=================================================
-# SECURE FILES AND DIRECTORIES
-#=================================================
-
-# Set permissions on app files
-chown -R root: $final_path
-
-#=================================================
-# SETUP SSOWAT
-#=================================================
-ynh_script_progression --message="Upgrading SSOwat configuration..." --time --weight=1
-
-# Make app public if necessary
-if [ $is_public -eq 1 ]
-then
-	# unprotected_uris allows SSO credentials to be passed anyway
-	ynh_app_setting_set --app=$app --key=unprotected_uris --value="/"
-fi
-
 #=================================================
 # RELOAD NGINX
 #=================================================
-ynh_script_progression --message="Reloading nginx web server..." --time --weight=1
+ynh_script_progression --message="Reloading NGINX web server..."
 
 ynh_systemd_action --service_name=nginx --action=reload
 
@@ -178,4 +146,4 @@ ynh_systemd_action --service_name=nginx --action=reload
 # END OF SCRIPT
 #=================================================
 
-ynh_script_progression --message="Upgrade of $app completed" --time --last
+ynh_script_progression --message="Upgrade of $app completed"