diff --git a/conf/nginx.conf b/conf/nginx.conf
new file mode 100644
index 0000000..7a94b04
--- /dev/null
+++ b/conf/nginx.conf
@@ -0,0 +1,16 @@
+#sub_path_only rewrite ^__PATH__$ __PATH__/ permanent;
+location __PATH__/ {
+
+  client_max_body_size 10M;
+
+  proxy_pass http://127.0.0.1:__PORT__;
+  proxy_http_version 1.1;
+  proxy_set_header Upgrade $http_upgrade;
+  proxy_set_header Connection "Upgrade";
+
+  # preserve client IP
+  proxy_set_header X-Forwarded-For $remote_addr;
+
+  # Include SSOWAT user panel's shortcut tile.
+  include conf.d/yunohost_panel.conf.inc;
+}
\ No newline at end of file
diff --git a/conf/systemd.service b/conf/systemd.service
new file mode 100644
index 0000000..d98a47e
--- /dev/null
+++ b/conf/systemd.service
@@ -0,0 +1,52 @@
+[Unit]
+Description=Service for Piped (__APP__)
+After=network.target
+
+[Service]
+Type=simple
+User=__APP__
+Group=__APP__
+
+WorkingDirectory=__INSTALL_DIR__/
+ExecStart=
+StandardOutput=append:/var/log/__APP__/__APP__.log
+StandardError=inherit
+Restart=on-failure
+RestartSec=10
+
+# Sandboxing options to harden security
+# Depending on specificities of your service/app, you may need to tweak these
+# .. but this should be a good baseline
+# Details for these options: https://www.freedesktop.org/software/systemd/man/systemd.exec.html
+NoNewPrivileges=yes
+PrivateTmp=yes
+PrivateDevices=yes
+RestrictAddressFamilies=AF_UNIX AF_INET AF_INET6 AF_NETLINK
+RestrictNamespaces=yes
+RestrictRealtime=yes
+DevicePolicy=closed
+ProtectClock=yes
+ProtectHostname=yes
+ProtectProc=invisible
+ProtectSystem=full
+ProtectControlGroups=yes
+ProtectKernelModules=yes
+ProtectKernelTunables=yes
+LockPersonality=yes
+SystemCallArchitectures=native
+SystemCallFilter=~@clock @debug @module @mount @obsolete @reboot @setuid @swap @cpu-emulation @privileged
+
+# Denying access to capabilities that should not be relevant for webapps
+# Doc: https://man7.org/linux/man-pages/man7/capabilities.7.html
+CapabilityBoundingSet=~CAP_RAWIO CAP_MKNOD
+CapabilityBoundingSet=~CAP_AUDIT_CONTROL CAP_AUDIT_READ CAP_AUDIT_WRITE
+CapabilityBoundingSet=~CAP_SYS_BOOT CAP_SYS_TIME CAP_SYS_MODULE CAP_SYS_PACCT
+CapabilityBoundingSet=~CAP_LEASE CAP_LINUX_IMMUTABLE CAP_IPC_LOCK
+CapabilityBoundingSet=~CAP_BLOCK_SUSPEND CAP_WAKE_ALARM
+CapabilityBoundingSet=~CAP_SYS_TTY_CONFIG
+CapabilityBoundingSet=~CAP_MAC_ADMIN CAP_MAC_OVERRIDE
+CapabilityBoundingSet=~CAP_NET_ADMIN CAP_NET_BROADCAST CAP_NET_RAW
+CapabilityBoundingSet=~CAP_SYS_ADMIN CAP_SYS_PTRACE CAP_SYSLOG
+
+[Install]
+WantedBy=multi-user.target
\ No newline at end of file
diff --git a/manifest.toml b/manifest.toml
new file mode 100644
index 0000000..a5d9c06
--- /dev/null
+++ b/manifest.toml
@@ -0,0 +1,65 @@
+packaging_format = 2
+
+id = "piped"
+name = "Piped"
+
+description.en = "An open-source alternative frontend for YouTube which is efficient by design."
+description.fr = "An open-source alternative frontend for YouTube which is efficient by design."
+
+version = "2024.01.21~ynh1"
+
+maintainers = ["orhtej2"]
+
+[upstream]
+license = "GNU AFFERO GPL"
+website = "https://docs.piped.video/"
+demo = "https://piped.video/"
+admindoc = "https://docs.piped.video/docs/"
+
+code = "https://github.com/TeamPiped/Piped"
+
+[integration]
+yunohost = '>= 11.2'
+architectures = "all" # TODO : handle the "all" option (no ["all"])
+multi_instance = true ldap = "not_relevant" # TODO : fixme, use actual booleans + handle the "not_relevant" value
+sso = "not_relevant"
+# FIXME: replace with an **estimate** minimum disk and RAM requirements. e.g. 20M, 400M, 1G... You may have have a look at CI results
+disk = "50M"
+ram.build = "50M"
+ram.runtime = "50M"
+
+[install]
+
+    [install.domain]
+    type = "domain"
+
+    [install.init_main_permission]
+    type = "group"
+    default = "visitors"
+
+[resources]
+
+    [resources.sources]
+
+        [resources.sources.main]
+        # This will pre-fetch the asset which can then be deployed during the install/upgrade scripts with :
+        #    ynh_setup_source --dest_dir="$install_dir"
+        # You can also define other assets than "main" and add --source_id="foobar" in the previous command
+        url = "https://codeload.github.com/TeamPiped/Piped/zip/11610d545cb08c87e4ae1c415f4acc2b37d0f789"
+        sha256 = "11610d545cb08c87e4ae1c415f4acc2b37d0f7891234567890-1231234567890"
+
+        # These infos are used by https://github.com/YunoHost/apps/blob/master/tools/autoupdate_app_sources/autoupdate_app_sources.py
+        # to auto-update the previous asset urls and sha256sum + manifest version
+        # assuming the upstream's code repo is on github and relies on tags or releases
+        # See the 'sources' resource documentation for more details
+
+        autoupdate.strategy = "latest_github_tag"
+
+    [resources.system_user]
+
+    [resources.install_dir]
+
+    [resources.permissions]
+    main.url = "/"
+
+    [resources.ports]
diff --git a/scripts/_common.sh b/scripts/_common.sh
new file mode 100644
index 0000000..c8eee12
--- /dev/null
+++ b/scripts/_common.sh
@@ -0,0 +1,9 @@
+#!/bin/bash
+
+#=================================================
+# COMMON VARIABLES
+#=================================================
+
+#=================================================
+# PERSONAL HELPERS
+#=================================================
diff --git a/scripts/backup b/scripts/backup
new file mode 100644
index 0000000..ce0d9e0
--- /dev/null
+++ b/scripts/backup
@@ -0,0 +1,27 @@
+#!/bin/bash
+#### App file generated with YoloGen, the YunoHost app generator, version .
+
+#=================================================
+# GENERIC START
+#=================================================
+# IMPORT GENERIC HELPERS
+#=================================================
+
+# Keep this path for calling _common.sh inside the execution's context of backup and restore scripts
+source ../settings/scripts/_common.sh
+source /usr/share/yunohost/helpers
+
+#=================================================
+# DECLARE DATA AND CONF FILES TO BACKUP
+#=================================================
+ynh_print_info --message="Declaring files to be backed up..."
+
+ynh_backup --src_path="/etc/nginx/conf.d/$domain.d/$app.conf"
+
+ynh_backup --src_path="/etc/systemd/system/$app.service"
+
+#=================================================
+# END OF SCRIPT
+#=================================================
+
+ynh_print_info --message="Backup script completed for $app. (YunoHost will then actually copy those files to the archive)."
\ No newline at end of file
diff --git a/scripts/change_url b/scripts/change_url
new file mode 100644
index 0000000..1998d1e
--- /dev/null
+++ b/scripts/change_url
@@ -0,0 +1,43 @@
+#!/bin/bash
+
+#=================================================
+# GENERIC STARTING
+#=================================================
+# IMPORT GENERIC HELPERS
+#=================================================
+
+source _common.sh
+source /usr/share/yunohost/helpers
+
+#=================================================
+# STOP SYSTEMD SERVICE
+#=================================================
+ynh_script_progression --message="Stopping a systemd service..."
+
+ynh_systemd_action --service_name=$app --action="stop" --log_path="/var/log/$app/$app.log"
+
+#=================================================
+# MODIFY URL IN NGINX CONF
+#=================================================
+ynh_script_progression --message="Updating NGINX web server configuration..."
+
+ynh_change_url_nginx_config
+
+#=================================================
+# SPECIFIC MODIFICATIONS
+#=================================================
+# ...
+#=================================================
+
+#=================================================
+# START SYSTEMD SERVICE
+#=================================================
+ynh_script_progression --message="Starting a systemd service..."
+
+ynh_systemd_action --service_name=$app --action="start" --log_path="/var/log/$app/$app.log"
+
+#=================================================
+# END OF SCRIPT
+#=================================================
+
+ynh_script_progression --message="Change of URL completed for $app" --last
\ No newline at end of file
diff --git a/scripts/install b/scripts/install
new file mode 100644
index 0000000..5cfd722
--- /dev/null
+++ b/scripts/install
@@ -0,0 +1,88 @@
+#!/bin/bash
+
+#=================================================
+# GENERIC START
+#=================================================
+# IMPORT GENERIC HELPERS
+#=================================================
+source _common.sh
+source /usr/share/yunohost/helpers
+
+#=================================================
+# INSTALL DEPENDENCIES
+#=================================================
+
+ynh_script_progression --message="Installing NodeJS..." --weight=10
+
+# Install Nodejs
+ynh_exec_warn_less ynh_install_nodejs --nodejs_version=$nodejs_version
+ynh_use_nodejs
+
+#=================================================
+# APP "BUILD" (DEPLOYING SOURCES, VENV, COMPILING ETC)
+#=================================================
+# DOWNLOAD, CHECK AND UNPACK SOURCE
+#=================================================
+ynh_script_progression --message="Setting up source files..."
+
+ynh_setup_source --dest_dir="$install_dir"
+
+chown -R $app:www-data "$install_dir"
+
+#=================================================
+# SYSTEM CONFIGURATION
+#=================================================
+ynh_script_progression --message="Adding system configurations related to $app..."
+
+# Create a dedicated NGINX config using the conf/nginx.conf template
+ynh_add_nginx_config
+
+# Create a dedicated systemd config
+ynh_add_systemd_config
+
+yunohost service add $app --log="/var/log/$app/$app.log"
+
+#=================================================
+# APP INITIAL CONFIGURATION
+#=================================================
+# ADD A CONFIGURATION
+#=================================================
+ynh_script_progression --message="Adding app's configuration file..."
+
+ynh_add_config --template="" --destination="$install_dir/"
+
+# FIXME: this should be handled by the core in the future
+# You may need to use chmod 600 instead of 400,
+# for example if the app is expected to be able to modify its own config
+chmod 400 "$install_dir/"
+chown $app:$app "$install_dir/"
+
+#=================================================
+# INSTALL APP
+#=================================================
+ynh_script_progression --message="Installing app..." --weight=5
+
+pushd $install_dir
+ynh_exec_as $app $ynh_node_load_PATH $ynh_npm install --production --ignore-scripts
+ynh_exec_as $app $ynh_node_load_PATH $ynh_npm run build
+popd
+
+#=================================================
+# FINALIZE APP INSTALL WITH CURL
+#=================================================
+
+# REMOVEME? ynh_script_progression --message="Finalizing installation..."
+# REMOVEME? ynh_local_curl "/INSTALL_PATH" "key1=value1" "key2=value2" "key3=value3"
+
+#=================================================
+# START SYSTEMD SERVICE
+#=================================================
+ynh_script_progression --message="Starting app's systemd service..."
+
+# Start a systemd service
+ynh_systemd_action --service_name=$app --action="start" --log_path="/var/log/$app/$app.log"
+
+#=================================================
+# END OF SCRIPT
+#=================================================
+ynh_script_progression --message="Installation of $app completed" --last
\ No newline at end of file
diff --git a/scripts/remove b/scripts/remove
new file mode 100644
index 0000000..97ae1b9
--- /dev/null
+++ b/scripts/remove
@@ -0,0 +1,37 @@
+#!/bin/bash
+
+#=================================================
+# GENERIC START
+#=================================================
+# IMPORT GENERIC HELPERS
+#=================================================
+source _common.sh
+source /usr/share/yunohost/helpers
+
+#=================================================
+# REMOVE SYSTEM CONFIGURATIONS
+#=================================================
+# REMOVE SYSTEMD SERVICE
+#=================================================
+ynh_script_progression --message="Removing system configurations related to $app..."
+
+# Remove the service from the list of services known by YunoHost (added from `yunohost service add`)
+if ynh_exec_warn_less yunohost service status $app >/dev/null
+then
+	ynh_script_progression --message="Removing $app service integration..."
+	yunohost service remove $app
+fi
+
+ynh_remove_systemd_config
+
+ynh_remove_nginx_config
+
+# Remove other various files specific to the app... such as :
+
+ynh_secure_remove --file="/var/log/$app"
+
+#=================================================
+# END OF SCRIPT
+#=================================================
+
+ynh_script_progression --message="Removal of $app completed" --last
\ No newline at end of file
diff --git a/scripts/restore b/scripts/restore
new file mode 100644
index 0000000..877d2f8
--- /dev/null
+++ b/scripts/restore
@@ -0,0 +1,56 @@
+#!/bin/bash
+
+#=================================================
+# GENERIC START
+#=================================================
+# IMPORT GENERIC HELPERS
+#=================================================
+
+# Keep this path for calling _common.sh inside the execution's context of backup and restore scripts
+source ../settings/scripts/_common.sh
+source /usr/share/yunohost/helpers
+
+#=================================================
+# RESTORE THE APP MAIN DIR
+#=================================================
+ynh_script_progression --message="Restoring the app main directory..." --weight=1
+
+ynh_restore_file --origin_path="$install_dir"
+
+chown -R $app:www-data "$install_dir"
+
+#=================================================
+# RESTORE THE MYSQL DATABASE
+#=================================================
+
+#=================================================
+# RESTORE SYSTEM CONFIGURATIONS
+#=================================================
+ynh_script_progression --message="Restoring system configurations related to $app..." --weight=1
+
+# This should be a symetric version of what happens in the install script
+
+ynh_restore_file --origin_path="/etc/nginx/conf.d/$domain.d/$app.conf"
+
+ynh_restore_file --origin_path="/etc/systemd/system/$app.service"
+systemctl enable $app.service --quiet
+
+yunohost service add $app --log="/var/log/$app/$app.log"
+
+# Other various files...
+
+#=================================================
+# RELOAD NGINX AND PHP-FPM OR THE APP SERVICE
+#=================================================
+ynh_script_progression --message="Reloading NGINX web server and $app's service..." --weight=1
+
+# Typically you only have either $app or php-fpm but not both at the same time...
+ynh_systemd_action --service_name=$app --action="start" --log_path="/var/log/$app/$app.log"
+
+ynh_systemd_action --service_name=nginx --action=reload
+
+#=================================================
+# END OF SCRIPT
+#=================================================
+
+ynh_script_progression --message="Restoration completed for $app" --last
\ No newline at end of file
diff --git a/scripts/upgrade b/scripts/upgrade
new file mode 100644
index 0000000..d376899
--- /dev/null
+++ b/scripts/upgrade
@@ -0,0 +1,77 @@
+#!/bin/bash
+
+#=================================================
+# GENERIC START
+#=================================================
+# IMPORT GENERIC HELPERS
+#=================================================
+
+source _common.sh
+source /usr/share/yunohost/helpers
+
+upgrade_type=$(ynh_check_app_version_changed)
+
+#=================================================
+# STANDARD UPGRADE STEPS
+#=================================================
+# ENSURE DOWNWARD COMPATIBILITY
+#=================================================
+
+#=================================================
+# STOP SYSTEMD SERVICE
+#=================================================
+ynh_script_progression --message="Stopping a systemd service..."
+
+ynh_systemd_action --service_name=$app --action="stop" --log_path="/var/log/$app/$app.log"
+
+#=================================================
+# "REBUILD" THE APP (DEPLOY NEW SOURCES, RERUN NPM BUILD...)
+#=================================================
+# DOWNLOAD, CHECK AND UNPACK SOURCE
+#=================================================
+
+if [ "$upgrade_type" == "UPGRADE_APP" ]
+then
+	ynh_script_progression --message="Upgrading source files..."
+
+	# Download, check integrity, uncompress and patch the source from app.src
+	ynh_setup_source --dest_dir="$install_dir"
+fi
+
+chown -R $app:www-data "$install_dir"
+
+#=================================================
+# REAPPLY SYSTEM CONFIGURATIONS
+#=================================================
+ynh_script_progression --message="Upgrading system configurations related to $app..."
+
+ynh_add_nginx_config
+
+ynh_add_systemd_config
+
+yunohost service add $app --log="/var/log/$app/$app.log"
+
+#=================================================
+# RECONFIGURE THE APP (UPDATE CONF, APPLY MIGRATIONS...)
+#=================================================
+# UPDATE A CONFIG FILE
+#=================================================
+ynh_script_progression --message="Updating a configuration file..."
+
+ynh_add_config --template="" --destination="$install_dir/"
+
+chmod 400 "$install_dir/some_config_file"
+chown $app:$app "$install_dir/some_config_file"
+
+#=================================================
+# START SYSTEMD SERVICE
+#=================================================
+ynh_script_progression --message="Starting a systemd service..."
+
+ynh_systemd_action --service_name=$app --action="start" --log_path="/var/log/$app/$app.log"
+
+#=================================================
+# END OF SCRIPT
+#=================================================
+
+ynh_script_progression --message="Upgrade of $app completed" --last
\ No newline at end of file