diff --git a/conf/extra_php-fpm.conf b/conf/extra_php-fpm.conf new file mode 100644 index 00000000..700c37c9 --- /dev/null +++ b/conf/extra_php-fpm.conf @@ -0,0 +1,4 @@ +; Additional php.ini defines, specific to this pool of workers. + +php_admin_value[upload_max_filesize] = 50M +php_admin_value[post_max_size] = 50M diff --git a/conf/php-fpm.conf b/conf/php-fpm.conf deleted file mode 100644 index 33d9032e..00000000 --- a/conf/php-fpm.conf +++ /dev/null @@ -1,430 +0,0 @@ -; Start a new pool named 'www'. -; the variable $pool can be used in any directive and will be replaced by the -; pool name ('www' here) -[__NAMETOCHANGE__] - -; Per pool prefix -; It only applies on the following directives: -; - 'access.log' -; - 'slowlog' -; - 'listen' (unixsocket) -; - 'chroot' -; - 'chdir' -; - 'php_values' -; - 'php_admin_values' -; When not set, the global prefix (or /usr) applies instead. -; Note: This directive can also be relative to the global prefix. -; Default Value: none -;prefix = /path/to/pools/$pool - -; Unix user/group of processes -; Note: The user is mandatory. If the group is not set, the default user's group -; will be used. -user = __USER__ -group = __USER__ - -; The address on which to accept FastCGI requests. -; Valid syntaxes are: -; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific IPv4 address on -; a specific port; -; '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on -; a specific port; -; 'port' - to listen on a TCP socket to all addresses -; (IPv6 and IPv4-mapped) on a specific port; -; '/path/to/unix/socket' - to listen on a unix socket. -; Note: This value is mandatory. -listen = /var/run/php/php__PHPVERSION__-fpm-__NAMETOCHANGE__.sock - -; Set listen(2) backlog. -; Default Value: 511 (-1 on FreeBSD and OpenBSD) -;listen.backlog = 511 - -; Set permissions for unix socket, if one is used. In Linux, read/write -; permissions must be set in order to allow connections from a web server. Many -; BSD-derived systems allow connections regardless of permissions. -; Default Values: user and group are set as the running user -; mode is set to 0660 -listen.owner = www-data -listen.group = www-data -;listen.mode = 0660 -; When POSIX Access Control Lists are supported you can set them using -; these options, value is a comma separated list of user/group names. -; When set, listen.owner and listen.group are ignored -;listen.acl_users = -;listen.acl_groups = - -; List of addresses (IPv4/IPv6) of FastCGI clients which are allowed to connect. -; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original -; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address -; must be separated by a comma. If this value is left blank, connections will be -; accepted from any ip address. -; Default Value: any -;listen.allowed_clients = 127.0.0.1 - -; Specify the nice(2) priority to apply to the pool processes (only if set) -; The value can vary from -19 (highest priority) to 20 (lower priority) -; Note: - It will only work if the FPM master process is launched as root -; - The pool processes will inherit the master process priority -; unless it specified otherwise -; Default Value: no set -; process.priority = -19 - -; Set the process dumpable flag (PR_SET_DUMPABLE prctl) even if the process user -; or group is differrent than the master process user. It allows to create process -; core dump and ptrace the process for the pool user. -; Default Value: no -; process.dumpable = yes - -; Choose how the process manager will control the number of child processes. -; Possible Values: -; static - a fixed number (pm.max_children) of child processes; -; dynamic - the number of child processes are set dynamically based on the -; following directives. With this process management, there will be -; always at least 1 children. -; pm.max_children - the maximum number of children that can -; be alive at the same time. -; pm.start_servers - the number of children created on startup. -; pm.min_spare_servers - the minimum number of children in 'idle' -; state (waiting to process). If the number -; of 'idle' processes is less than this -; number then some children will be created. -; pm.max_spare_servers - the maximum number of children in 'idle' -; state (waiting to process). If the number -; of 'idle' processes is greater than this -; number then some children will be killed. -; ondemand - no children are created at startup. Children will be forked when -; new requests will connect. The following parameter are used: -; pm.max_children - the maximum number of children that -; can be alive at the same time. -; pm.process_idle_timeout - The number of seconds after which -; an idle process will be killed. -; Note: This value is mandatory. -pm = dynamic - -; The number of child processes to be created when pm is set to 'static' and the -; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'. -; This value sets the limit on the number of simultaneous requests that will be -; served. Equivalent to the ApacheMaxClients directive with mpm_prefork. -; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP -; CGI. The below defaults are based on a server without much resources. Don't -; forget to tweak pm.* to fit your needs. -; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand' -; Note: This value is mandatory. -pm.max_children = 5 - -; The number of child processes created on startup. -; Note: Used only when pm is set to 'dynamic' -; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2 -pm.start_servers = 2 - -; The desired minimum number of idle server processes. -; Note: Used only when pm is set to 'dynamic' -; Note: Mandatory when pm is set to 'dynamic' -pm.min_spare_servers = 1 - -; The desired maximum number of idle server processes. -; Note: Used only when pm is set to 'dynamic' -; Note: Mandatory when pm is set to 'dynamic' -pm.max_spare_servers = 3 - -; The number of seconds after which an idle process will be killed. -; Note: Used only when pm is set to 'ondemand' -; Default Value: 10s -;pm.process_idle_timeout = 10s; - -; The number of requests each child process should execute before respawning. -; This can be useful to work around memory leaks in 3rd party libraries. For -; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS. -; Default Value: 0 -;pm.max_requests = 500 - -; The URI to view the FPM status page. If this value is not set, no URI will be -; recognized as a status page. It shows the following informations: -; pool - the name of the pool; -; process manager - static, dynamic or ondemand; -; start time - the date and time FPM has started; -; start since - number of seconds since FPM has started; -; accepted conn - the number of request accepted by the pool; -; listen queue - the number of request in the queue of pending -; connections (see backlog in listen(2)); -; max listen queue - the maximum number of requests in the queue -; of pending connections since FPM has started; -; listen queue len - the size of the socket queue of pending connections; -; idle processes - the number of idle processes; -; active processes - the number of active processes; -; total processes - the number of idle + active processes; -; max active processes - the maximum number of active processes since FPM -; has started; -; max children reached - number of times, the process limit has been reached, -; when pm tries to start more children (works only for -; pm 'dynamic' and 'ondemand'); -; Value are updated in real time. -; Example output: -; pool: www -; process manager: static -; start time: 01/Jul/2011:17:53:49 +0200 -; start since: 62636 -; accepted conn: 190460 -; listen queue: 0 -; max listen queue: 1 -; listen queue len: 42 -; idle processes: 4 -; active processes: 11 -; total processes: 15 -; max active processes: 12 -; max children reached: 0 -; -; By default the status page output is formatted as text/plain. Passing either -; 'html', 'xml' or 'json' in the query string will return the corresponding -; output syntax. Example: -; http://www.foo.bar/status -; http://www.foo.bar/status?json -; http://www.foo.bar/status?html -; http://www.foo.bar/status?xml -; -; By default the status page only outputs short status. Passing 'full' in the -; query string will also return status for each pool process. -; Example: -; http://www.foo.bar/status?full -; http://www.foo.bar/status?json&full -; http://www.foo.bar/status?html&full -; http://www.foo.bar/status?xml&full -; The Full status returns for each process: -; pid - the PID of the process; -; state - the state of the process (Idle, Running, ...); -; start time - the date and time the process has started; -; start since - the number of seconds since the process has started; -; requests - the number of requests the process has served; -; request duration - the duration in µs of the requests; -; request method - the request method (GET, POST, ...); -; request URI - the request URI with the query string; -; content length - the content length of the request (only with POST); -; user - the user (PHP_AUTH_USER) (or '-' if not set); -; script - the main script called (or '-' if not set); -; last request cpu - the %cpu the last request consumed -; it's always 0 if the process is not in Idle state -; because CPU calculation is done when the request -; processing has terminated; -; last request memory - the max amount of memory the last request consumed -; it's always 0 if the process is not in Idle state -; because memory calculation is done when the request -; processing has terminated; -; If the process is in Idle state, then informations are related to the -; last request the process has served. Otherwise informations are related to -; the current request being served. -; Example output: -; ************************ -; pid: 31330 -; state: Running -; start time: 01/Jul/2011:17:53:49 +0200 -; start since: 63087 -; requests: 12808 -; request duration: 1250261 -; request method: GET -; request URI: /test_mem.php?N=10000 -; content length: 0 -; user: - -; script: /home/fat/web/docs/php/test_mem.php -; last request cpu: 0.00 -; last request memory: 0 -; -; Note: There is a real-time FPM status monitoring sample web page available -; It's available in: /usr/share/php/7.0/fpm/status.html -; -; Note: The value must start with a leading slash (/). The value can be -; anything, but it may not be a good idea to use the .php extension or it -; may conflict with a real PHP file. -; Default Value: not set -;pm.status_path = /status - -; The ping URI to call the monitoring page of FPM. If this value is not set, no -; URI will be recognized as a ping page. This could be used to test from outside -; that FPM is alive and responding, or to -; - create a graph of FPM availability (rrd or such); -; - remove a server from a group if it is not responding (load balancing); -; - trigger alerts for the operating team (24/7). -; Note: The value must start with a leading slash (/). The value can be -; anything, but it may not be a good idea to use the .php extension or it -; may conflict with a real PHP file. -; Default Value: not set -;ping.path = /ping - -; This directive may be used to customize the response of a ping request. The -; response is formatted as text/plain with a 200 response code. -; Default Value: pong -;ping.response = pong - -; The access log file -; Default: not set -;access.log = log/$pool.access.log - -; The access log format. -; The following syntax is allowed -; %%: the '%' character -; %C: %CPU used by the request -; it can accept the following format: -; - %{user}C for user CPU only -; - %{system}C for system CPU only -; - %{total}C for user + system CPU (default) -; %d: time taken to serve the request -; it can accept the following format: -; - %{seconds}d (default) -; - %{miliseconds}d -; - %{mili}d -; - %{microseconds}d -; - %{micro}d -; %e: an environment variable (same as $_ENV or $_SERVER) -; it must be associated with embraces to specify the name of the env -; variable. Some exemples: -; - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e -; - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e -; %f: script filename -; %l: content-length of the request (for POST request only) -; %m: request method -; %M: peak of memory allocated by PHP -; it can accept the following format: -; - %{bytes}M (default) -; - %{kilobytes}M -; - %{kilo}M -; - %{megabytes}M -; - %{mega}M -; %n: pool name -; %o: output header -; it must be associated with embraces to specify the name of the header: -; - %{Content-Type}o -; - %{X-Powered-By}o -; - %{Transfert-Encoding}o -; - .... -; %p: PID of the child that serviced the request -; %P: PID of the parent of the child that serviced the request -; %q: the query string -; %Q: the '?' character if query string exists -; %r: the request URI (without the query string, see %q and %Q) -; %R: remote IP address -; %s: status (response code) -; %t: server time the request was received -; it can accept a strftime(3) format: -; %d/%b/%Y:%H:%M:%S %z (default) -; The strftime(3) format must be encapsuled in a %{}t tag -; e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t -; %T: time the log has been written (the request has finished) -; it can accept a strftime(3) format: -; %d/%b/%Y:%H:%M:%S %z (default) -; The strftime(3) format must be encapsuled in a %{}t tag -; e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t -; %u: remote user -; -; Default: "%R - %u %t \"%m %r\" %s" -;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%" - -; The log file for slow requests -; Default Value: not set -; Note: slowlog is mandatory if request_slowlog_timeout is set -;slowlog = log/$pool.log.slow - -; The timeout for serving a single request after which a PHP backtrace will be -; dumped to the 'slowlog' file. A value of '0s' means 'off'. -; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) -; Default Value: 0 -;request_slowlog_timeout = 0 - -; The timeout for serving a single request after which the worker process will -; be killed. This option should be used when the 'max_execution_time' ini option -; does not stop script execution for some reason. A value of '0' means 'off'. -; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) -; Default Value: 0 -request_terminate_timeout = 1d - -; Set open file descriptor rlimit. -; Default Value: system defined value -;rlimit_files = 1024 - -; Set max core size rlimit. -; Possible Values: 'unlimited' or an integer greater or equal to 0 -; Default Value: system defined value -;rlimit_core = 0 - -; Chroot to this directory at the start. This value must be defined as an -; absolute path. When this value is not set, chroot is not used. -; Note: you can prefix with '$prefix' to chroot to the pool prefix or one -; of its subdirectories. If the pool prefix is not set, the global prefix -; will be used instead. -; Note: chrooting is a great security feature and should be used whenever -; possible. However, all PHP paths will be relative to the chroot -; (error_log, sessions.save_path, ...). -; Default Value: not set -;chroot = - -; Chdir to this directory at the start. -; Note: relative path can be used. -; Default Value: current directory or / when chroot -chdir = __INSTALL_DIR__ - -; Redirect worker stdout and stderr into main error log. If not set, stdout and -; stderr will be redirected to /dev/null according to FastCGI specs. -; Note: on highloaded environement, this can cause some delay in the page -; process time (several ms). -; Default Value: no -;catch_workers_output = yes - -; Clear environment in FPM workers -; Prevents arbitrary environment variables from reaching FPM worker processes -; by clearing the environment in workers before env vars specified in this -; pool configuration are added. -; Setting to "no" will make all environment variables available to PHP code -; via getenv(), $_ENV and $_SERVER. -; Default Value: yes -;clear_env = no - -; Limits the extensions of the main script FPM will allow to parse. This can -; prevent configuration mistakes on the web server side. You should only limit -; FPM to .php extensions to prevent malicious users to use other extensions to -; execute php code. -; Note: set an empty value to allow all extensions. -; Default Value: .php -;security.limit_extensions = .php .php3 .php4 .php5 .php7 - -; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from -; the current environment. -; Default Value: clean env -;env[HOSTNAME] = $HOSTNAME -;env[PATH] = /usr/local/bin:/usr/bin:/bin -;env[TMP] = /tmp -;env[TMPDIR] = /tmp -;env[TEMP] = /tmp - -; Additional php.ini defines, specific to this pool of workers. These settings -; overwrite the values previously defined in the php.ini. The directives are the -; same as the PHP SAPI: -; php_value/php_flag - you can set classic ini defines which can -; be overwritten from PHP call 'ini_set'. -; php_admin_value/php_admin_flag - these directives won't be overwritten by -; PHP call 'ini_set' -; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no. - -; Defining 'extension' will load the corresponding shared extension from -; extension_dir. Defining 'disable_functions' or 'disable_classes' will not -; overwrite previously defined php.ini values, but will append the new value -; instead. - -; Note: path INI options can be relative and will be expanded with the prefix -; (pool, global or /usr) - -; Default Value: nothing is defined by default except the values in php.ini and -; specified at startup with the -d argument -;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com -;php_flag[display_errors] = off -;php_admin_value[error_log] = /var/log/fpm-php.www.log -;php_admin_flag[log_errors] = on -;php_admin_value[memory_limit] = 32M - -; Common values to change to increase file upload limit -php_admin_value[upload_max_filesize] = 50M -php_admin_value[post_max_size] = 50M -; php_admin_flag[mail.add_x_header] = Off - -; Other common parameters -; php_admin_value[max_execution_time] = 600 -; php_admin_value[max_input_time] = 300 -; php_admin_value[memory_limit] = 256M -; php_admin_flag[short_open_tag] = On diff --git a/doc/DISCLAIMER.md b/doc/ADMIN.md similarity index 100% rename from doc/DISCLAIMER.md rename to doc/ADMIN.md diff --git a/doc/DISCLAIMER_fr.md b/doc/ADMIN_fr.md similarity index 100% rename from doc/DISCLAIMER_fr.md rename to doc/ADMIN_fr.md diff --git a/manifest.json b/manifest.json deleted file mode 100644 index 70aa95fa..00000000 --- a/manifest.json +++ /dev/null @@ -1,48 +0,0 @@ -{ - "name": "Pixelfed", - "id": "pixelfed", - "packaging_format": 1, - "description": { - "en": "ActivityPub Federated Image Sharing", - "fr": "Logiciel de partage d'image fédéré via ActivityPub" - }, - "version": "0.11.5~ynh3", - "url": "https://pixelfed.org/", - "upstream": { - "license": "AGPL-3.0-or-later", - "website": "https://pixelfed.org/", - "admindoc": "https://docs.pixelfed.org/running-pixelfed/administration.html", - "userdoc": "https://docs.pixelfed.org/", - "code": "https://github.com/pixelfed/pixelfed" - }, - "license": "AGPL-3.0-or-later", - "maintainer": [ - { - "name": "yalh76" - }, - { - "name": "lapineige" - } - ], - "requirements": { - "yunohost": ">= 11.0" - }, - "multi_instance": true, - "services": [ - "nginx", - "php8.1-fpm" - ], - "arguments": { - "install": [ - { - "name": "domain", - "type": "domain" - }, - { - "name": "is_public", - "type": "boolean", - "default": true - } - ] - } -} diff --git a/manifest.toml b/manifest.toml index b3052443..dd8c751a 100644 --- a/manifest.toml +++ b/manifest.toml @@ -15,22 +15,19 @@ website = "https://pixelfed.org/" admindoc = "https://docs.pixelfed.org/running-pixelfed/administration.html" userdoc = "https://docs.pixelfed.org/" code = "https://github.com/pixelfed/pixelfed" -cpe = "???" # FIXME: optional but recommended if relevant, this is meant to contain the Common Platform Enumeration, which is sort of a standard id for applications defined by the NIST. In particular, Yunohost may use this is in the future to easily track CVE (=security reports) related to apps. The CPE may be obtained by searching here: https://nvd.nist.gov/products/cpe/search. For example, for Nextcloud, the CPE is 'cpe:2.3:a:nextcloud:nextcloud' (no need to include the version number) -fund = "???" # FIXME: optional but recommended (or remove if irrelevant / not applicable). This is meant to be an URL where people can financially support this app, especially when its development is based on volunteers and/or financed by its community. YunoHost may later advertise it in the webadmin. [integration] -yunohost = ">= 11.0" -architectures = "all" # FIXME: can be replaced by a list of supported archs using the dpkg --print-architecture nomenclature (amd64/i386/armhf/arm64), for example: ["amd64", "i386"] +yunohost = ">= 11.1.18" +architectures = "all" multi_instance = true -ldap = "?" # FIXME: replace with true, false, or "not_relevant". Not to confuse with the "sso" key : the "ldap" key corresponds to wether or not a user *can* login on the app using its YunoHost credentials. -sso = "?" # FIXME: replace with true, false, or "not_relevant". Not to confuse with the "ldap" key : the "sso" key corresponds to wether or not a user is *automatically logged-in* on the app when logged-in on the YunoHost portal. -disk = "50M" # FIXME: replace with an **estimate** minimum disk requirement. e.g. 20M, 400M, 1G, ... -ram.build = "50M" # FIXME: replace with an **estimate** minimum ram requirement. e.g. 50M, 400M, 1G, ... -ram.runtime = "50M" # FIXME: replace with an **estimate** minimum ram requirement. e.g. 50M, 400M, 1G, ... +ldap = false +sso = false +disk = "50M" +ram.build = "50M" +ram.runtime = "50M" [install] [install.domain] - # this is a generic question - ask strings are automatically handled by Yunohost's core type = "domain" full_domain = true @@ -51,5 +48,8 @@ ram.runtime = "50M" # FIXME: replace with an **estimate** minimum ram requiremen [resources.permissions] main.url = "/" + [resources.apt] + packages = "postgresql libgd3 jpegoptim optipng pngquant ffmpeg imagemagick supervisor php8.1-redis php8.1-bcmath php8.1-cli php8.1-ctype php8.1-curl php8.1-exif php8.1-gd php8.1-iconv php8.1-intl php8.1-mbstring php8.1-tokenizer php8.1-xml php8.1-zip php8.1-pdo php8.1-pgsql php8.1-fileinfo php8.1-imagick" + [resources.database] type = "postgresql" diff --git a/scripts/_common.sh b/scripts/_common.sh index eb34d7fa..4a32507b 100644 --- a/scripts/_common.sh +++ b/scripts/_common.sh @@ -4,12 +4,8 @@ # COMMON VARIABLES #================================================= -#REMOVEME? YNH_PHP_VERSION="8.1" - YNH_COMPOSER_VERSION="2.1.5" -#REMOVEME? pkg_dependencies="postgresql libgd3 jpegoptim optipng pngquant ffmpeg imagemagick supervisor php${YNH_PHP_VERSION}-redis php${YNH_PHP_VERSION}-bcmath php${YNH_PHP_VERSION}-cli php${YNH_PHP_VERSION}-ctype php${YNH_PHP_VERSION}-curl php${YNH_PHP_VERSION}-exif php${YNH_PHP_VERSION}-gd php${YNH_PHP_VERSION}-iconv php${YNH_PHP_VERSION}-intl php${YNH_PHP_VERSION}-mbstring php${YNH_PHP_VERSION}-tokenizer php${YNH_PHP_VERSION}-xml php${YNH_PHP_VERSION}-zip php${YNH_PHP_VERSION}-pdo php${YNH_PHP_VERSION}-pgsql php${YNH_PHP_VERSION}-fileinfo php${YNH_PHP_VERSION}-imagick" - #================================================= # PERSONAL HELPERS #================================================= @@ -21,3 +17,211 @@ YNH_COMPOSER_VERSION="2.1.5" #================================================= # FUTURE OFFICIAL HELPERS #================================================= + +# get the first available redis database +# +# usage: ynh_redis_get_free_db +# | returns: the database number to use +ynh_redis_get_free_db() { + local result max db + result="$(redis-cli INFO keyspace)" + + # get the num + max=$(cat /etc/redis/redis.conf | grep ^databases | grep -Eow "[0-9]+") + + db=0 + # default Debian setting is 15 databases + for i in $(seq 0 "$max") + do + if ! echo "$result" | grep -q "db$i" + then + db=$i + break 1 + fi + db=-1 + done + + test "$db" -eq -1 && ynh_die --message="No available Redis databases..." + + echo "$db" +} + +# Create a master password and set up global settings +# Please always call this script in install and restore scripts +# +# usage: ynh_redis_remove_db database +# | arg: database - the database to erase +ynh_redis_remove_db() { + local db=$1 + redis-cli -n "$db" flushall +} + + +#================================================= + + +# Create a dedicated supervisor config +# +# usage: ynh_add_supervisor_config [--service=service] [--template=template] +# | arg: -s, --service= - Service name (optionnal, `$app` by default) +# | arg: -t, --template= - Name of template file (optionnal, this is 'supervisor' by default, meaning ./conf/supervisor.service will be used as template) +# +# This will use the template `../conf/.service`. +# +# See the documentation of `ynh_add_config` for a description of the template +# format and how placeholders are replaced with actual variables. +# +# Requires YunoHost version 2.7.11 or higher. +ynh_add_supervisor_config () { + # Declare an array to define the options of this helper. + local legacy_args=stv + local -A args_array=( [s]=service= [t]=template= [v]=others_var=) + local service + local template + local others_var + # Manage arguments with getopts + ynh_handle_getopts_args "$@" + local service="${service:-$app}" + local template="${template:-supervisor.service}" + others_var="${others_var:-}" + + [[ -z "$others_var" ]] || ynh_print_warn --message="Packagers: using --others_var is unecessary since Yunohost 4.2" + + ynh_add_config --template="$YNH_APP_BASEDIR/conf/$template" --destination="/etc/supervisor/conf.d/$service.conf" + + supervisorctl reread + supervisorctl update +} + +# Remove the dedicated supervisor config +# +# usage: ynh_remove_supervisor_config [--service=service] +# | arg: -s, --service= - Service name (optionnal, $app by default) +# +# Requires YunoHost version 2.7.2 or higher. +ynh_remove_supervisor_config () { + # Declare an array to define the options of this helper. + local legacy_args=s + local -A args_array=( [s]=service= ) + local service + # Manage arguments with getopts + ynh_handle_getopts_args "$@" + local service="${service:-$app}" + + local finalsupervisorconf="/etc/supervisor/conf.d/$service.conf" + if [ -e "$finalsupervisorconf" ] + then + ynh_supervisor_action --service_name=$service --action=stop + ynh_secure_remove --file="$finalsupervisorconf" + supervisorctl reread + supervisorctl update + fi +} + +# Start (or other actions) a service, print a log in case of failure and optionnaly wait until the service is completely started +# +# usage: ynh_supervisor_action [--service_name=service_name] [--action=action] [ [--line_match="line to match"] [--log_path=log_path] [--timeout=300] [--length=20] ] +# | arg: -n, --service_name= - Name of the service to start. Default : `$app` +# | arg: -a, --action= - Action to perform with supervisorctl. Default: start +# | arg: -l, --line_match= - Line to match - The line to find in the log to attest the service have finished to boot. If not defined it don't wait until the service is completely started. +# | arg: -p, --log_path= - Log file - Path to the log file. Default : `/var/log/$app/$app.log` +# | arg: -t, --timeout= - Timeout - The maximum time to wait before ending the watching. Default : 300 seconds. +# | arg: -e, --length= - Length of the error log : Default : 20 +# +# Requires YunoHost version 3.5.0 or higher. +ynh_supervisor_action() { + # Declare an array to define the options of this helper. + local legacy_args=nalpte + declare -Ar args_array=( [n]=service_name= [a]=action= [l]=line_match= [p]=log_path= [t]=timeout= [e]=length= ) + local service_name + local action + local line_match + local length + local log_path + local timeout + # Manage arguments with getopts + ynh_handle_getopts_args "$@" + service_name="${service_name:-$app}" + action=${action:-start} + line_match=${line_match:-} + length=${length:-20} + log_path="${log_path:-/var/log/$service_name/$service_name.log}" + timeout=${timeout:-300} + + # Start to read the log + if [[ -n "$line_match" ]] + then + local templog="$(mktemp)" + # Following the starting of the app in its log + if [ "$log_path" == "systemd" ] + then + # Read the supervisor journal + journalctl --unit=supervisor --follow --since=-0 --quiet > "$templog" & + # Get the PID of the journalctl command + local pid_tail=$! + else + # Read the specified log file + tail --follow=name --retry --lines=0 "$log_path" > "$templog" 2>&1 & + # Get the PID of the tail command + local pid_tail=$! + fi + fi + + # Use reload-or-restart instead of reload. So it wouldn't fail if the service isn't running. + if [ "$action" == "reload" ]; then + action="update" + fi + + # If the service fails to perform the action + if ! supervisorctl $action $service_name + then + # Show syslog for this service + ynh_exec_err journalctl --quiet --no-hostname --no-pager --lines=$length --unit=$service_name + # If a log is specified for this service, show also the content of this log + if [ -e "$log_path" ] + then + ynh_exec_err tail --lines=$length "$log_path" + fi + ynh_clean_check_starting + return 1 + fi + + # Start the timeout and try to find line_match + if [[ -n "${line_match:-}" ]] + then + set +x + local i=0 + for i in $(seq 1 $timeout) + do + # Read the log until the sentence is found, that means the app finished to start. Or run until the timeout + if grep --extended-regexp --quiet "$line_match" "$templog" + then + ynh_print_info --message="The service $service_name has correctly executed the action ${action}." + break + fi + if [ $i -eq 3 ]; then + echo -n "Please wait, the service $service_name is ${action}ing" >&2 + fi + if [ $i -ge 3 ]; then + echo -n "." >&2 + fi + sleep 1 + done + set -x + if [ $i -ge 3 ]; then + echo "" >&2 + fi + if [ $i -eq $timeout ] + then + ynh_print_warn --message="The service $service_name didn't fully executed the action ${action} before the timeout." + ynh_print_warn --message="Please find here an extract of the end of the log of the service $service_name:" + ynh_exec_warn journalctl --quiet --no-hostname --no-pager --lines=$length --unit=$service_name + if [ -e "$log_path" ] + then + ynh_print_warn --message="\-\-\-" + ynh_exec_warn tail --lines=$length "$log_path" + fi + fi + ynh_clean_check_starting + fi +} diff --git a/scripts/backup b/scripts/backup index 33560f71..535642d5 100644 --- a/scripts/backup +++ b/scripts/backup @@ -10,28 +10,6 @@ source ../settings/scripts/_common.sh source /usr/share/yunohost/helpers -#================================================= -# MANAGE SCRIPT FAILURE -#================================================= - -#REMOVEME? ynh_clean_setup () { - true -} -# Exit if an error occurs during the execution of the script -#REMOVEME? ynh_abort_if_errors - -#================================================= -# LOAD SETTINGS -#================================================= -ynh_print_info --message="Loading settings..." - -#REMOVEME? app=$YNH_APP_INSTANCE_NAME - -#REMOVEME? #REMOVEME? install_dir=$(ynh_app_setting_get --app=$app --key=install_dir) -#REMOVEME? domain=$(ynh_app_setting_get --app=$app --key=domain) -#REMOVEME? db_name=$(ynh_app_setting_get --app=$app --key=db_name) -#REMOVEME? phpversion=$(ynh_app_setting_get --app=$app --key=phpversion) - #================================================= # DECLARE DATA AND CONF FILES TO BACKUP #================================================= diff --git a/scripts/change_url b/scripts/change_url index 9546559c..71e3966e 100644 --- a/scripts/change_url +++ b/scripts/change_url @@ -10,55 +10,6 @@ source _common.sh source ynh_supervisor source /usr/share/yunohost/helpers -#================================================= -# RETRIEVE ARGUMENTS -#================================================= - -#REMOVEME? old_domain=$YNH_APP_OLD_DOMAIN -#REMOVEME? old_path=$YNH_APP_OLD_PATH - -#REMOVEME? new_domain=$YNH_APP_NEW_DOMAIN -#REMOVEME? new_path="/" - -#REMOVEME? app=$YNH_APP_INSTANCE_NAME - -#================================================= -# LOAD SETTINGS -#================================================= -ynh_script_progression --message="Loading settings..." --weight=1 - -#REMOVEME? # Needed for helper "ynh_add_nginx_config" -#REMOVEME? #REMOVEME? install_dir=$(ynh_app_setting_get --app=$app --key=install_dir) - -#REMOVEME? phpversion=$(ynh_app_setting_get --app=$app --key=phpversion) - -#================================================= -# BACKUP BEFORE CHANGE URL THEN ACTIVE TRAP -#================================================= -#REMOVEME? ynh_script_progression --message="Backing up the app before changing its URL (may take a while)..." --weight=1 - -# Backup the current version of the app -#REMOVEME? ynh_backup_before_upgrade -#REMOVEME? ynh_clean_setup () { - # Remove the new domain config file, the remove script won't do it as it doesn't know yet its location. -#REMOVEME? ynh_secure_remove --file="/etc/nginx/conf.d/$new_domain.d/$app.conf" - - # Restore it if the upgrade fails -#REMOVEME? ynh_restore_upgradebackup -} -# Exit if an error occurs during the execution of the script -#REMOVEME? ynh_abort_if_errors - -#================================================= -# CHECK WHICH PARTS SHOULD BE CHANGED -#================================================= - -#REMOVEME? change_domain=0 -#REMOVEME? if [ "$old_domain" != "$new_domain" ] -then - #REMOVEME? change_domain=1 -fi - #================================================= # STANDARD MODIFICATIONS #================================================= @@ -75,18 +26,6 @@ ynh_script_progression --message="Updating NGINX web server configuration..." -- ynh_change_url_nginx_config -#REMOVEME? nginx_conf_path=/etc/nginx/conf.d/$old_domain.d/$app.conf - -# Change the domain for NGINX -if [ $change_domain -eq 1 ] -then - # Delete file checksum for the old conf file location -#REMOVEME? ynh_delete_file_checksum --file="$nginx_conf_path" -#REMOVEME? mv $nginx_conf_path /etc/nginx/conf.d/$new_domain.d/$app.conf - # Store file checksum for the new config file location -#REMOVEME? ynh_store_file_checksum --file="/etc/nginx/conf.d/$new_domain.d/$app.conf" -fi - #================================================= # SPECIFIC MODIFICATIONS #================================================= @@ -126,13 +65,6 @@ ynh_script_progression --message="Starting a supervisor service..." --weight=1 ynh_supervisor_action --service_name="${app}-horizon" --action="start" --log_path="systemd" --line_match="success: ${app}-horizon" -#================================================= -# RELOAD NGINX -#================================================= -#REMOVEME? ynh_script_progression --message="Reloading NGINX web server..." --weight=1 - -#REMOVEME? #REMOVEME? ynh_systemd_action --service_name=nginx --action=reload - #================================================= # END OF SCRIPT #================================================= diff --git a/scripts/install b/scripts/install index f9826531..9d374d16 100644 --- a/scripts/install +++ b/scripts/install @@ -11,74 +11,24 @@ source ynh_redis source ynh_supervisor source /usr/share/yunohost/helpers -#================================================= -# MANAGE SCRIPT FAILURE -#================================================= - -#REMOVEME? ynh_clean_setup () { - true -} -# Exit if an error occurs during the execution of the script -#REMOVEME? ynh_abort_if_errors - #================================================= # RETRIEVE ARGUMENTS FROM THE MANIFEST #================================================= -#REMOVEME? domain=$YNH_APP_ARG_DOMAIN -path="/" -#REMOVEME? is_public=$YNH_APP_ARG_IS_PUBLIC app_key="base64:$(ynh_string_random --length=32 | base64)" -#REMOVEME? app=$YNH_APP_INSTANCE_NAME - -#================================================= -# CHECK IF THE APP CAN BE INSTALLED WITH THESE ARGS -#================================================= -#REMOVEME? ynh_script_progression --message="Validating installation parameters..." --weight=1 - -#REMOVEME? install_dir=/var/www/$app -#REMOVEME? test ! -e "$install_dir" || ynh_die --message="This path already contains a folder" - -# Register (book) web path -#REMOVEME? ynh_webpath_register --app=$app --domain=$domain --path=$path +fpm_footprint="low" +fpm_free_footprint=0 +fpm_usage="low" #================================================= # STORE SETTINGS FROM MANIFEST #================================================= -#REMOVEME? ynh_script_progression --message="Storing installation settings..." --weight=1 -#REMOVEME? ynh_app_setting_set --app=$app --key=domain --value=$domain -#REMOVEME? ynh_app_setting_set --app=$app --key=path --value=$path ynh_app_setting_set --app=$app --key=app_key --value=$app_key - -#================================================= -# STANDARD MODIFICATIONS -#================================================= -# INSTALL DEPENDENCIES -#================================================= -#REMOVEME? ynh_script_progression --message="Installing dependencies..." --weight=1 - -#REMOVEME? ynh_exec_warn_less ynh_install_app_dependencies $pkg_dependencies - -#================================================= -# CREATE DEDICATED USER -#================================================= -#REMOVEME? ynh_script_progression --message="Configuring system user..." --weight=1 - -# Create a system user -#REMOVEME? ynh_system_user_create --username=$app --home_dir="$install_dir" - -#================================================= -# CREATE A POSTGRESQL DATABASE -#================================================= -#REMOVEME? ynh_script_progression --message="Creating a PostgreSQL database..." --weight=1 - -#REMOVEME? db_name=$(ynh_sanitize_dbid --db_name=$app) -#REMOVEME? db_user=$db_name -#REMOVEME? ynh_app_setting_set --app=$app --key=db_name --value=$db_name -#REMOVEME? ynh_psql_test_if_first_run -#REMOVEME? ynh_psql_setup_db --db_user=$db_name --db_name=$db_name +ynh_app_setting_set --app=$app --key=fpm_footprint --value=$fpm_footprint +ynh_app_setting_set --app=$app --key=fpm_free_footprint --value=$fpm_free_footprint +ynh_app_setting_set --app=$app --key=fpm_usage --value=$fpm_usage #================================================= # CONFIGURE REDIS DATABASE @@ -93,11 +43,9 @@ ynh_app_setting_set --app="$app" --key=redis_db --value="$redis_db" #================================================= ynh_script_progression --message="Setting up source files..." --weight=1 -#REMOVEME? ynh_app_setting_set --app=$app --key=install_dir --value=$install_dir # Download, check integrity, uncompress and patch the source from app.src ynh_setup_source --dest_dir="$install_dir" -chmod 750 "$install_dir" chmod -R o-rwx "$install_dir" chown -R $app:www-data "$install_dir" @@ -106,16 +54,8 @@ chown -R $app:www-data "$install_dir" #================================================= ynh_script_progression --message="Configuring PHP-FPM..." --weight=1 -# Create a dedicated PHP-FPM config -ynh_add_fpm_config -#REMOVEME? phpversion=$(ynh_app_setting_get --app=$app --key=phpversion) +ynh_add_fpm_config --usage=$fpm_usage --footprint=$fpm_footprint -#================================================= -# NGINX CONFIGURATION -#================================================= -ynh_script_progression --message="Configuring NGINX web server..." --weight=1 - -# Create a dedicated NGINX config ynh_add_nginx_config #================================================= @@ -123,7 +63,7 @@ ynh_add_nginx_config #================================================= # INSTALL COMPOSER DEPENDENCIES #================================================= -#REMOVEME? ynh_script_progression --message="Installing composer dependencies..." --weight=1 +ynh_script_progression --message="Installing composer dependencies..." --weight=1 ynh_exec_warn_less ynh_install_composer --phpversion="$phpversion" --composerversion="$YNH_COMPOSER_VERSION" --workdir="$install_dir" @@ -212,26 +152,6 @@ ynh_script_progression --message="Starting a supervisor service..." --weight=1 # Start a supervisor service ynh_supervisor_action --service_name="${app}-horizon" --action="reload" --log_path="systemd" --line_match="success: ${app}-horizon" -#================================================= -# SETUP SSOWAT -#================================================= -#REMOVEME? ynh_script_progression --message="Configuring permissions..." --weight=1 - -# Make app public if necessary -#REMOVEME? if [ $is_public -eq 1 ] -then - # Everyone can access the app. - # The "main" permission is automatically created before the install script. -#REMOVEME? ynh_permission_update --permission="main" --add="visitors" -fi - -#================================================= -# RELOAD NGINX -#================================================= -#REMOVEME? ynh_script_progression --message="Reloading NGINX web server..." --weight=1 - -#REMOVEME? ynh_systemd_action --service_name=nginx --action=reload - #================================================= # END OF SCRIPT #================================================= diff --git a/scripts/remove b/scripts/remove index dc963c65..c1ff05ae 100644 --- a/scripts/remove +++ b/scripts/remove @@ -7,23 +7,8 @@ #================================================= source _common.sh -source ynh_redis -source ynh_supervisor source /usr/share/yunohost/helpers -#================================================= -# LOAD SETTINGS -#================================================= -ynh_script_progression --message="Loading settings..." --weight=1 - -#REMOVEME? app=$YNH_APP_INSTANCE_NAME - -#REMOVEME? domain=$(ynh_app_setting_get --app=$app --key=domain) -#REMOVEME? db_name=$(ynh_app_setting_get --app=$app --key=db_name) -#REMOVEME? db_user=$db_name -#REMOVEME? #REMOVEME? install_dir=$(ynh_app_setting_get --app=$app --key=install_dir) -#REMOVEME? redis_db=$(ynh_app_setting_get --app=$app --key=redis_db) - #================================================= # STANDARD REMOVE #================================================= @@ -53,14 +38,6 @@ ynh_script_progression --message="Removing logrotate configuration..." --weight= # Remove the app-specific logrotate config ynh_remove_logrotate -#================================================= -# REMOVE THE POSTGRESQL DATABASE -#================================================= -#REMOVEME? ynh_script_progression --message="Removing the PostgreSQL database..." --weight=1 - -# Remove a database if it exists, along with the associated user -#REMOVEME? ynh_psql_remove_db --db_user=$db_user --db_name=$db_name - #================================================= # REMOVE THE REDIS DATABASE #================================================= @@ -68,14 +45,6 @@ ynh_script_progression --message="Removing the Redis database..." --weight=1 ynh_redis_remove_db "$redis_db" -#================================================= -# REMOVE APP MAIN DIR -#================================================= -#REMOVEME? ynh_script_progression --message="Removing app main directory..." --weight=1 - -# Remove the app directory securely -#REMOVEME? ynh_secure_remove --file="$install_dir" - #================================================= # REMOVE NGINX CONFIGURATION #================================================= @@ -92,14 +61,6 @@ ynh_script_progression --message="Removing PHP-FPM configuration..." --weight=1 # Remove the dedicated PHP-FPM config ynh_remove_fpm_config -#================================================= -# REMOVE DEPENDENCIES -#================================================= -#REMOVEME? ynh_script_progression --message="Removing dependencies..." --weight=1 - -# Remove metapackage and its dependencies -#REMOVEME? ynh_remove_app_dependencies - #================================================= # SPECIFIC REMOVE #================================================= @@ -113,16 +74,6 @@ ynh_secure_remove --file="/etc/cron.d/$app" # Remove the log files ynh_secure_remove --file="/var/log/$app" -#================================================= -# GENERIC FINALIZATION -#================================================= -# REMOVE DEDICATED USER -#================================================= -#REMOVEME? ynh_script_progression --message="Removing the dedicated system user..." --weight=1 - -# Delete a system user -#REMOVEME? ynh_system_user_delete --username=$app - #================================================= # END OF SCRIPT #================================================= diff --git a/scripts/restore b/scripts/restore index 0bfd52d6..cf0d895d 100644 --- a/scripts/restore +++ b/scripts/restore @@ -8,51 +8,8 @@ # Keep this path for calling _common.sh inside the execution's context of backup and restore scripts source ../settings/scripts/_common.sh -source ../settings/scripts/ynh_supervisor source /usr/share/yunohost/helpers -#================================================= -# MANAGE SCRIPT FAILURE -#================================================= - -#REMOVEME? ynh_clean_setup () { - true -} -# Exit if an error occurs during the execution of the script -#REMOVEME? ynh_abort_if_errors - -#================================================= -# LOAD SETTINGS -#================================================= -ynh_script_progression --message="Loading settings..." --weight=1 - -#REMOVEME? app=$YNH_APP_INSTANCE_NAME - -#REMOVEME? domain=$(ynh_app_setting_get --app=$app --key=domain) -#REMOVEME? path=$(ynh_app_setting_get --app=$app --key=path) -#REMOVEME? #REMOVEME? install_dir=$(ynh_app_setting_get --app=$app --key=install_dir) -#REMOVEME? db_name=$(ynh_app_setting_get --app=$app --key=db_name) -#REMOVEME? db_user=$db_name -#REMOVEME? phpversion=$(ynh_app_setting_get --app=$app --key=phpversion) - -#================================================= -# CHECK IF THE APP CAN BE RESTORED -#================================================= -#REMOVEME? ynh_script_progression --message="Validating restoration parameters..." --weight=1 - -#REMOVEME? test ! -d $install_dir \ - || ynh_die --message="There is already a directory: $install_dir " - -#================================================= -# STANDARD RESTORATION STEPS -#================================================= -# RECREATE THE DEDICATED USER -#================================================= -#REMOVEME? ynh_script_progression --message="Recreating the dedicated system user..." --weight=1 - -# Create the dedicated user (if not existing) -#REMOVEME? ynh_system_user_create --username=$app --home_dir="$install_dir" - #================================================= # RESTORE THE APP MAIN DIR #================================================= @@ -60,20 +17,9 @@ ynh_script_progression --message="Restoring the app main directory..." --weight= ynh_restore_file --origin_path="$install_dir" -chmod 750 "$install_dir" chmod -R o-rwx "$install_dir" chown -R $app:www-data "$install_dir" -#================================================= -# SPECIFIC RESTORATION -#================================================= -# REINSTALL DEPENDENCIES -#================================================= -#REMOVEME? ynh_script_progression --message="Reinstalling dependencies..." --weight=1 - -# Define and install dependencies -#REMOVEME? ynh_exec_warn_less ynh_install_app_dependencies $pkg_dependencies - #================================================= # RESTORE THE PHP-FPM CONFIGURATION #================================================= @@ -91,11 +37,8 @@ ynh_restore_file --origin_path="/etc/nginx/conf.d/$domain.d/$app.conf" #================================================= # RESTORE THE POSTGRESQL DATABASE #================================================= -#REMOVEME? ynh_script_progression --message="Restoring the PostgreSQL database..." --weight=1 +ynh_script_progression --message="Restoring the PostgreSQL database..." --weight=1 -#REMOVEME? db_pwd=$(ynh_app_setting_get --app=$app --key=psqlpwd) -#REMOVEME? ynh_psql_test_if_first_run -#REMOVEME? ynh_psql_setup_db --db_user=$db_user --db_name=$db_name --db_pwd=$db_pwd ynh_psql_execute_file_as_root --file="./db.sql" --database=$db_name #================================================= diff --git a/scripts/upgrade b/scripts/upgrade index 9648121b..b3a38f09 100644 --- a/scripts/upgrade +++ b/scripts/upgrade @@ -7,48 +7,14 @@ #================================================= source _common.sh -source ynh_redis -source ynh_supervisor source /usr/share/yunohost/helpers -#================================================= -# LOAD SETTINGS -#================================================= -ynh_script_progression --message="Loading settings..." --weight=1 - -#REMOVEME? app=$YNH_APP_INSTANCE_NAME - -#REMOVEME? domain=$(ynh_app_setting_get --app=$app --key=domain) -#REMOVEME? path=$(ynh_app_setting_get --app=$app --key=path) -#REMOVEME? #REMOVEME? install_dir=$(ynh_app_setting_get --app=$app --key=install_dir) -#REMOVEME? db_name=$(ynh_app_setting_get --app=$app --key=db_name) -#REMOVEME? db_user=$db_name -#REMOVEME? db_pwd=$(ynh_app_setting_get --app=$app --key=psqlpwd) -#REMOVEME? app_key=$(ynh_app_setting_get --app=$app --key=app_key) -#REMOVEME? redis_db=$(ynh_app_setting_get --app=$app --key=redis_db) - #================================================= # CHECK VERSION #================================================= -ynh_script_progression --message="Checking version..." --weight=1 upgrade_type=$(ynh_check_app_version_changed) -#================================================= -# BACKUP BEFORE UPGRADE THEN ACTIVE TRAP -#================================================= -#REMOVEME? ynh_script_progression --message="Backing up the app before upgrading (may take a while)..." --weight=1 - -# Backup the current version of the app -#REMOVEME? ynh_backup_before_upgrade -#REMOVEME? ynh_clean_setup () { - ynh_clean_check_starting - # Restore it if the upgrade fails -#REMOVEME? ynh_restore_upgradebackup -} -# Exit if an error occurs during the execution of the script -#REMOVEME? ynh_abort_if_errors - #================================================= # STANDARD UPGRADE STEPS #================================================= @@ -79,22 +45,19 @@ if [ -z "$app_key" ]; then ynh_app_setting_set --app="$app" --key=app_key --value="$app_key" fi -#REMOVEME? if dpkg --compare-versions "0.9.0~ynh3" gt "$(ynh_read_manifest --manifest="/etc/yunohost/apps/$YNH_APP_INSTANCE_NAME/manifest.json" --manifest_key="version" || echo 1.0)" ; then +if dpkg --compare-versions "0.9.0~ynh3" gt "$(ynh_read_manifest --manifest="/etc/yunohost/apps/$YNH_APP_INSTANCE_NAME/manifest.json" --manifest_key="version" || echo 1.0)" ; then ynh_script_progression --message="Ensuring upgrade compatibility to 0.9.0~ynh3..." ynh_script_progression --message="Configuring a systemd service..." ynh_add_systemd_config --service="${app}-horizon" --template=horizon.conf fi -#REMOVEME? if dpkg --compare-versions "0.10.9~ynh2" gt "$(ynh_read_manifest --manifest="/etc/yunohost/apps/$YNH_APP_INSTANCE_NAME/manifest.json" --manifest_key="version" || echo 1.0)" ; then +if dpkg --compare-versions "0.10.9~ynh2" gt "$(ynh_read_manifest --manifest="/etc/yunohost/apps/$YNH_APP_INSTANCE_NAME/manifest.json" --manifest_key="version" || echo 1.0)" ; then ynh_script_progression --message="Ensuring upgrade compatibility to 0.10.9~ynh2..." ynh_script_progression --message="Stopping and removing the systemd service..." ynh_remove_systemd_config --service="${app}-horizon" -#REMOVEME? ynh_script_progression --message="Installing dependencies..." -#REMOVEME? ynh_install_app_dependencies "$pkg_dependencies" - ynh_script_progression --message="Creating log file..." mkdir -p "/var/log/$app/" touch "/var/log/$app/${app}-horizon.log" @@ -108,7 +71,7 @@ fi ynh_supervisor_action --service_name="${app}-horizon" --action="start" --log_path="systemd" --line_match="success: ${app}-horizon" fi -#REMOVEME? if dpkg --compare-versions "0.10.9~ynh3" gt "$(ynh_read_manifest --manifest="/etc/yunohost/apps/$YNH_APP_INSTANCE_NAME/manifest.json" --manifest_key="version" || echo 1.0)" ; then +if dpkg --compare-versions "0.10.9~ynh3" gt "$(ynh_read_manifest --manifest="/etc/yunohost/apps/$YNH_APP_INSTANCE_NAME/manifest.json" --manifest_key="version" || echo 1.0)" ; then ynh_script_progression --message="Ensuring upgrade compatibility to 0.10.9~ynh3..." if ynh_exec_warn_less yunohost service status ${app}-horizon >/dev/null @@ -121,21 +84,6 @@ fi yunohost service add "supervisor" --description="Supervisor daemon for $app" --log="/var/log/$app/${app}-horizon.log" fi -# Cleaning legacy permissions -#REMOVEME? if ynh_legacy_permissions_exists; then -#REMOVEME? ynh_legacy_permissions_delete_all - - ynh_app_setting_delete --app=$app --key=is_public -fi - -#================================================= -# CREATE DEDICATED USER -#================================================= -#REMOVEME? ynh_script_progression --message="Making sure dedicated system user exists..." --weight=1 - -# Create a dedicated user (if not existing) -#REMOVEME? ynh_system_user_create --username=$app --home_dir="$install_dir" - #================================================= # DOWNLOAD, CHECK AND UNPACK SOURCE #================================================= @@ -148,19 +96,11 @@ then ynh_setup_source --dest_dir="$install_dir" --keep=".env" fi -chmod 750 "$install_dir" chmod -R o-rwx "$install_dir" chown -R $app:www-data "$install_dir" # Pixelfed app should be able to edit its settings from the admin panel chmod 600 "$install_dir"/.env -#================================================= -# UPGRADE DEPENDENCIES -#================================================= -#REMOVEME? ynh_script_progression --message="Upgrading dependencies..." --weight=1 - -#REMOVEME? ynh_exec_warn_less ynh_install_app_dependencies $pkg_dependencies - #================================================= # PHP-FPM CONFIGURATION #================================================= @@ -168,7 +108,6 @@ ynh_script_progression --message="Upgrading PHP-FPM configuration..." --weight=1 # Create a dedicated PHP-FPM config ynh_add_fpm_config -#REMOVEME? phpversion=$(ynh_app_setting_get --app=$app --key=phpversion) #================================================= # NGINX CONFIGURATION @@ -187,8 +126,6 @@ ynh_script_progression --message="Updating composer..." --weight=1 ynh_exec_warn_less ynh_composer_exec --workdir="$install_dir" --commands="self-update" -#REMOVEME? ynh_script_progression --message="Updating composer dependencies..." --weight=1 - ynh_exec_warn_less ynh_composer_exec --workdir="$install_dir" --commands="update" #================================================= @@ -264,13 +201,6 @@ ynh_script_progression --message="Starting a supervisor service..." --weight=1 ynh_supervisor_action --service_name="${app}-horizon" --action="start" --log_path="systemd" --line_match="success: ${app}-horizon" -#================================================= -# RELOAD NGINX -#================================================= -#REMOVEME? ynh_script_progression --message="Reloading NGINX web server..." --weight=1 - -#REMOVEME? ynh_systemd_action --service_name=nginx --action=reload - #================================================= # END OF SCRIPT #================================================= diff --git a/scripts/ynh_redis b/scripts/ynh_redis deleted file mode 100644 index af5a55c2..00000000 --- a/scripts/ynh_redis +++ /dev/null @@ -1,39 +0,0 @@ -#!/bin/bash - -# get the first available redis database -# -# usage: ynh_redis_get_free_db -# | returns: the database number to use -ynh_redis_get_free_db() { - local result max db - result="$(redis-cli INFO keyspace)" - - # get the num - max=$(cat /etc/redis/redis.conf | grep ^databases | grep -Eow "[0-9]+") - - db=0 - # default Debian setting is 15 databases - for i in $(seq 0 "$max") - do - if ! echo "$result" | grep -q "db$i" - then - db=$i - break 1 - fi - db=-1 - done - - test "$db" -eq -1 && ynh_die --message="No available Redis databases..." - - echo "$db" -} - -# Create a master password and set up global settings -# Please always call this script in install and restore scripts -# -# usage: ynh_redis_remove_db database -# | arg: database - the database to erase -ynh_redis_remove_db() { - local db=$1 - redis-cli -n "$db" flushall -} diff --git a/scripts/ynh_supervisor b/scripts/ynh_supervisor deleted file mode 100644 index 67bd2bd7..00000000 --- a/scripts/ynh_supervisor +++ /dev/null @@ -1,167 +0,0 @@ -#!/bin/bash - -# Create a dedicated supervisor config -# -# usage: ynh_add_supervisor_config [--service=service] [--template=template] -# | arg: -s, --service= - Service name (optionnal, `$app` by default) -# | arg: -t, --template= - Name of template file (optionnal, this is 'supervisor' by default, meaning ./conf/supervisor.service will be used as template) -# -# This will use the template `../conf/.service`. -# -# See the documentation of `ynh_add_config` for a description of the template -# format and how placeholders are replaced with actual variables. -# -# Requires YunoHost version 2.7.11 or higher. -ynh_add_supervisor_config () { - # Declare an array to define the options of this helper. - local legacy_args=stv - local -A args_array=( [s]=service= [t]=template= [v]=others_var=) - local service - local template - local others_var - # Manage arguments with getopts - ynh_handle_getopts_args "$@" - local service="${service:-$app}" - local template="${template:-supervisor.service}" - others_var="${others_var:-}" - - [[ -z "$others_var" ]] || ynh_print_warn --message="Packagers: using --others_var is unecessary since Yunohost 4.2" - - ynh_add_config --template="$YNH_APP_BASEDIR/conf/$template" --destination="/etc/supervisor/conf.d/$service.conf" - - supervisorctl reread - supervisorctl update -} - -# Remove the dedicated supervisor config -# -# usage: ynh_remove_supervisor_config [--service=service] -# | arg: -s, --service= - Service name (optionnal, $app by default) -# -# Requires YunoHost version 2.7.2 or higher. -ynh_remove_supervisor_config () { - # Declare an array to define the options of this helper. - local legacy_args=s - local -A args_array=( [s]=service= ) - local service - # Manage arguments with getopts - ynh_handle_getopts_args "$@" - local service="${service:-$app}" - - local finalsupervisorconf="/etc/supervisor/conf.d/$service.conf" - if [ -e "$finalsupervisorconf" ] - then - ynh_supervisor_action --service_name=$service --action=stop - ynh_secure_remove --file="$finalsupervisorconf" - supervisorctl reread - supervisorctl update - fi -} - -# Start (or other actions) a service, print a log in case of failure and optionnaly wait until the service is completely started -# -# usage: ynh_supervisor_action [--service_name=service_name] [--action=action] [ [--line_match="line to match"] [--log_path=log_path] [--timeout=300] [--length=20] ] -# | arg: -n, --service_name= - Name of the service to start. Default : `$app` -# | arg: -a, --action= - Action to perform with supervisorctl. Default: start -# | arg: -l, --line_match= - Line to match - The line to find in the log to attest the service have finished to boot. If not defined it don't wait until the service is completely started. -# | arg: -p, --log_path= - Log file - Path to the log file. Default : `/var/log/$app/$app.log` -# | arg: -t, --timeout= - Timeout - The maximum time to wait before ending the watching. Default : 300 seconds. -# | arg: -e, --length= - Length of the error log : Default : 20 -# -# Requires YunoHost version 3.5.0 or higher. -ynh_supervisor_action() { - # Declare an array to define the options of this helper. - local legacy_args=nalpte - declare -Ar args_array=( [n]=service_name= [a]=action= [l]=line_match= [p]=log_path= [t]=timeout= [e]=length= ) - local service_name - local action - local line_match - local length - local log_path - local timeout - # Manage arguments with getopts - ynh_handle_getopts_args "$@" - service_name="${service_name:-$app}" - action=${action:-start} - line_match=${line_match:-} - length=${length:-20} - log_path="${log_path:-/var/log/$service_name/$service_name.log}" - timeout=${timeout:-300} - - # Start to read the log - if [[ -n "$line_match" ]] - then - local templog="$(mktemp)" - # Following the starting of the app in its log - if [ "$log_path" == "systemd" ] - then - # Read the supervisor journal - journalctl --unit=supervisor --follow --since=-0 --quiet > "$templog" & - # Get the PID of the journalctl command - local pid_tail=$! - else - # Read the specified log file - tail --follow=name --retry --lines=0 "$log_path" > "$templog" 2>&1 & - # Get the PID of the tail command - local pid_tail=$! - fi - fi - - # Use reload-or-restart instead of reload. So it wouldn't fail if the service isn't running. - if [ "$action" == "reload" ]; then - action="update" - fi - - # If the service fails to perform the action - if ! supervisorctl $action $service_name - then - # Show syslog for this service - ynh_exec_err journalctl --quiet --no-hostname --no-pager --lines=$length --unit=$service_name - # If a log is specified for this service, show also the content of this log - if [ -e "$log_path" ] - then - ynh_exec_err tail --lines=$length "$log_path" - fi - ynh_clean_check_starting - return 1 - fi - - # Start the timeout and try to find line_match - if [[ -n "${line_match:-}" ]] - then - set +x - local i=0 - for i in $(seq 1 $timeout) - do - # Read the log until the sentence is found, that means the app finished to start. Or run until the timeout - if grep --extended-regexp --quiet "$line_match" "$templog" - then - ynh_print_info --message="The service $service_name has correctly executed the action ${action}." - break - fi - if [ $i -eq 3 ]; then - echo -n "Please wait, the service $service_name is ${action}ing" >&2 - fi - if [ $i -ge 3 ]; then - echo -n "." >&2 - fi - sleep 1 - done - set -x - if [ $i -ge 3 ]; then - echo "" >&2 - fi - if [ $i -eq $timeout ] - then - ynh_print_warn --message="The service $service_name didn't fully executed the action ${action} before the timeout." - ynh_print_warn --message="Please find here an extract of the end of the log of the service $service_name:" - ynh_exec_warn journalctl --quiet --no-hostname --no-pager --lines=$length --unit=$service_name - if [ -e "$log_path" ] - then - ynh_print_warn --message="\-\-\-" - ynh_exec_warn tail --lines=$length "$log_path" - fi - fi - ynh_clean_check_starting - fi -}