Fix

.github/ISSUE_TEMPLATE.md

@@ -0,0 +1,55 @@
+---
+name: Bug report
+about: When creating a bug report, please use the following template to provide all the relevant information and help debugging efficiently.
+
+---
+
+**How to post a meaningful bug report**
+1. *Read this whole template first.*
+2. *Determine if you are on the right place:*
+   - *If you were performing an action on the app from the webadmin or the CLI (install, update, backup, restore, change_url...), you are on the right place!*
+   - *Otherwise, the issue may be due to the app itself. Refer to its documentation or repository for help.*
+   - *When in doubt, post here and we will figure it out together.*
+3. *Delete the italic comments as you write over them below, and remove this guide.*
+--- 
+
+### Describe the bug
+
+*A clear and concise description of what the bug is.*
+
+### Context
+
+- Hardware: *VPS bought online / Old laptop or computer / Raspberry Pi at home / Internet Cube with VPN / Other ARM board / ...*
+- YunoHost version: x.x.x
+- I have access to my server: *Through SSH | through the webadmin | direct access via keyboard / screen | ...*
+- Are you in a special context or did you perform some particular tweaking on your YunoHost instance?: *no / yes*
+  - If yes, please explain:
+- Using, or trying to install package version/branch:
+- If upgrading, current package version: *can be found in the admin, or with `yunohost app info $app_id`*
+
+### Steps to reproduce
+
+- *If you performed a command from the CLI, the command itself is enough. For example:*
+    ```sh
+    sudo yunohost app install the_app
+    ```
+- *If you used the webadmin, please perform the equivalent command from the CLI first.*
+- *If the error occurs in your browser, explain what you did:*
+   1. *Go to '...'*
+   2. *Click on '...'*
+   3. *Scroll down to '...'*
+   4. *See error*
+
+### Expected behavior
+
+*A clear and concise description of what you expected to happen. You can remove this section if the command above is enough to understand your intent.*
+
+### Logs
+
+*When an operation fails, YunoHost provides a simple way to share the logs.*
+- *In the webadmin, the error message contains a link to the relevant log page. On that page, you will be able to 'Share with Yunopaste'. If you missed it, the logs of previous operations are also available under Tools > Logs.*
+- *In command line, the command to share the logs is displayed at the end of the operation and looks like `yunohost log display [log name] --share`. If you missed it, you can find the log ID of a previous operation using `yunohost log list`.*
+
+*After sharing the log, please copypaste directly the link provided by YunoHost (to help readability, no need to copypaste the entire content of the log here, just the link is enough...)*
+
+*If applicable and useful, add screenshots to help explain your problem.*

.github/PULL_REQUEST_TEMPLATE.md

@@ -0,0 +1,16 @@
+## Problem
+
+- *Description of why you made this PR*
+
+## Solution
+
+- *And how do you fix that problem*
+
+## PR Status
+
+- [ ] Code finished and ready to be reviewed/tested
+- [ ] The fix/enhancement were manually tested (if applicable)
+
+## Automatic tests
+
+Automatic tests can be triggered on https://ci-apps-dev.yunohost.org/ *after creating the PR*, by commenting "!testme", "!gogogadgetoci" or "By the power of systemd, I invoke The Great App CI to test this Pull Request!". (N.B. : for this to work you need to be a member of the Yunohost-Apps organization)

.github/workflows/updater.sh

@@ -0,0 +1,136 @@
+#!/bin/bash
+
+#=================================================
+# PACKAGE UPDATING HELPER
+#=================================================
+
+# This script is meant to be run by GitHub Actions
+# The YunoHost-Apps organisation offers a template Action to run this script periodically
+# Since each app is different, maintainers can adapt its contents so as to perform
+# automatic actions when a new upstream release is detected.
+
+# Remove this exit command when you are ready to run this Action
+#exit 1
+
+#=================================================
+# FETCHING LATEST RELEASE AND ITS ASSETS
+#=================================================
+
+# Fetching information
+current_version=$(cat manifest.json | jq -j '.version|split("~")[0]')
+repo=$(cat manifest.json | jq -j '.upstream.code|split("https://github.com/")[1]')
+# Some jq magic is needed, because the latest upstream release is not always the latest version (e.g. security patches for older versions)
+version=$(curl --silent "https://api.github.com/repos/$repo/releases" | jq -r '.[] | select( .prerelease != true ) | .tag_name' | sort -V | tail -1)
+assets=($(curl --silent "https://api.github.com/repos/$repo/releases" | jq -r '[ .[] | select(.tag_name=="'$version'").assets[].browser_download_url ] | join(" ") | @sh' | tr -d "'"))
+
+# Later down the script, we assume the version has only digits and dots
+# Sometimes the release name starts with a "v", so let's filter it out.
+# You may need more tweaks here if the upstream repository has different naming conventions. 
+if [[ ${version:0:1} == "v" || ${version:0:1} == "V" ]]; then
+    version=${version:1}
+fi
+
+# Setting up the environment variables
+echo "Current version: $current_version"
+echo "Latest release from upstream: $version"
+echo "VERSION=$version" >> $GITHUB_ENV
+# For the time being, let's assume the script will fail
+echo "PROCEED=false" >> $GITHUB_ENV
+
+# Proceed only if the retrieved version is greater than the current one
+if ! dpkg --compare-versions "$current_version" "lt" "$version" ; then
+    echo "::warning ::No new version available"
+    exit 0
+# Proceed only if a PR for this new version does not already exist
+elif git ls-remote -q --exit-code --heads https://github.com/$GITHUB_REPOSITORY.git ci-auto-update-v$version ; then
+    echo "::warning ::A branch already exists for this update"
+    exit 0
+fi
+
+# Each release can hold multiple assets (e.g. binaries for different architectures, source code, etc.)
+echo "${#assets[@]} available asset(s)"
+
+#=================================================
+# UPDATE SOURCE FILES
+#=================================================
+
+# Here we use the $assets variable to get the resources published in the upstream release.
+# Here is an example for Grav, it has to be adapted in accordance with how the upstream releases look like.
+
+# Let's loop over the array of assets URLs
+for asset_url in ${assets[@]}; do
+
+echo "Handling asset at $asset_url"
+
+# Assign the asset to a source file in conf/ directory
+# Here we base the source file name upon a unique keyword in the assets url (admin vs. update)
+# Leave $src empty to ignore the asset
+case $asset_url in
+  *"admin"*)
+    src="app"
+    ;;
+  *"update"*)
+    src="app-upgrade"
+    ;;
+  *)
+    src=""
+    ;;
+esac
+
+# If $src is not empty, let's process the asset
+if [ ! -z "$src" ]; then
+
+# Create the temporary directory
+tempdir="$(mktemp -d)"
+
+# Download sources and calculate checksum
+filename=${asset_url##*/}
+curl --silent -4 -L $asset_url -o "$tempdir/$filename"
+checksum=$(sha256sum "$tempdir/$filename" | head -c 64)
+
+# Delete temporary directory
+rm -rf $tempdir
+
+# Get extension
+if [[ $filename == *.tar.gz ]]; then
+  extension=tar.gz
+else
+  extension=${filename##*.}
+fi
+
+# Rewrite source file
+cat <<EOT > conf/$src.src
+SOURCE_URL=$asset_url
+SOURCE_SUM=$checksum
+SOURCE_SUM_PRG=sha256sum
+SOURCE_FORMAT=$extension
+SOURCE_IN_SUBDIR=true
+SOURCE_FILENAME=
+EOT
+echo "... conf/$src.src updated"
+
+else
+echo "... asset ignored"
+fi
+
+done
+
+#=================================================
+# SPECIFIC UPDATE STEPS
+#=================================================
+
+# Any action on the app's source code can be done.
+# The GitHub Action workflow takes care of committing all changes after this script ends.
+
+#=================================================
+# GENERIC FINALIZATION
+#=================================================
+
+# Replace new version in manifest
+echo "$(jq -s --indent 4 ".[] | .version = \"$version~ynh1\"" manifest.json)" > manifest.json
+
+# No need to update the README, yunohost-bot takes care of it
+
+# The Action will proceed only if the PROCEED environment variable is set to true
+echo "PROCEED=true" >> $GITHUB_ENV
+exit 0

conf/app.src

@@ -1,5 +1,5 @@
-SOURCE_URL=https://github.com/PrestaShop/PrestaShop/releases/download/1.7.7.8/prestashop_1.7.7.8.zip
-SOURCE_SUM=3a6e61be215f11948e5283caf8c8b50e62767b84afb478f47ae7240dd588f026
+SOURCE_URL=https://github.com/PrestaShop/PrestaShop/releases/download/1.7.8.1/prestashop_1.7.8.1.zip
+SOURCE_SUM=fd375b9aa3452f83a65a03403fa2c38fd6c3bc50ae058ed0467b5a37fd51e7e9
 SOURCE_SUM_PRG=sha256sum
 SOURCE_FORMAT=zip
 SOURCE_IN_SUBDIR=false

conf/nginx.conf

@@ -4,11 +4,6 @@ location __PATH__/ {
   # Path to source
   alias __FINALPATH__/ ;
 
-  # Force usage of https
-  if ($scheme = http) {
-    rewrite ^ https://$server_name$request_uri? permanent;
-  }
-
   index index.php;
 
   # Common parameter to increase upload size limit in conjunction with dedicated php-fpm file

manifest.json

@@ -6,13 +6,12 @@
         "en": "Create a E-commerce Website",
         "fr": "Créer un site ecommerce"
     },
-    "version": "1.7.7.8~ynh1",
+    "version": "1.7.8.1~ynh1",
     "url": "https://www.prestashop.com/",
     "upstream": {
         "license": "OSL-3.0",
         "website": "https://prestashop.com",
         "demo": "https://demo.prestashop.com/#/en/front",
-        "admindoc": "https://yunohost.org/packaging_apps",
         "code": "https://github.com/PrestaShop/PrestaShop"
     },
     "license": "OSL-3.0",
@@ -28,7 +27,7 @@
       }
     ],
     "requirements": {
-        "yunohost": ">> 4.2.4"
+        "yunohost": ">> 4.3.0"
     },
     "multi_instance": true,
     "services": [

scripts/_common.sh

@@ -6,7 +6,7 @@
 
 YNH_PHP_VERSION="7.3"
 
-extra_php_dependencies="php${YNH_PHP_VERSION}-mbstring php${YNH_PHP_VERSION}-json php${YNH_PHP_VERSION}-fpm php${YNH_PHP_VERSION}-common php${YNH_PHP_VERSION}-curl php${YNH_PHP_VERSION}-intl php${YNH_PHP_VERSION}-xmlrpc php${YNH_PHP_VERSION}-mysql php${YNH_PHP_VERSION}-gd php${YNH_PHP_VERSION}-xml php${YNH_PHP_VERSION}-cli php${YNH_PHP_VERSION}-zip"
+pkg_dependencies="php${YNH_PHP_VERSION}-mbstring php${YNH_PHP_VERSION}-json php${YNH_PHP_VERSION}-fpm php${YNH_PHP_VERSION}-common php${YNH_PHP_VERSION}-curl php${YNH_PHP_VERSION}-intl php${YNH_PHP_VERSION}-xmlrpc php${YNH_PHP_VERSION}-mysql php${YNH_PHP_VERSION}-gd php${YNH_PHP_VERSION}-xml php${YNH_PHP_VERSION}-cli php${YNH_PHP_VERSION}-zip"
 
 #=================================================
 # PERSONAL HELPERS

scripts/install

@@ -45,6 +45,13 @@ ynh_script_progression --message="Storing installation settings..." --weight=1
 ynh_app_setting_set --app=$app --key=domain --value=$domain
 ynh_app_setting_set --app=$app --key=path --value=$path_url
 
+#=================================================
+# INSTALL DEPENDENCIES
+#=================================================
+ynh_script_progression --message="Installing dependencies..." --weight=1
+
+ynh_install_app_dependencies $pkg_dependencies
+
 #=================================================
 # CREATE DEDICATED USER
 #=================================================
@@ -90,8 +97,7 @@ ynh_add_nginx_config
 ynh_script_progression --message="Configuring PHP-FPM..." --weight=3
 
 # Create a dedicated PHP-FPM config
-ynh_add_fpm_config --package="$extra_php_dependencies"
-phpversion=$(ynh_app_setting_get --app=$app --key=phpversion)
+ynh_add_fpm_config
 
 #=================================================
 # SETUP SSOWAT

scripts/remove

@@ -30,6 +30,14 @@ ynh_script_progression --message="Removing the MySQL database..." --weight=2
 # Remove a database if it exists, along with the associated user
 ynh_mysql_remove_db --db_user=$db_user --db_name=$db_name
 
+#=================================================
+# REMOVE DEPENDENCIES
+#=================================================
+ynh_script_progression --message="Removing dependencies..." --weight=1
+
+# Remove metapackage and its dependencies
+ynh_remove_app_dependencies
+
 #=================================================
 # REMOVE APP MAIN DIR
 #=================================================

scripts/restore

@@ -35,8 +35,7 @@ phpversion=$(ynh_app_setting_get --app=$app --key=phpversion)
 #=================================================
 ynh_script_progression --message="Validating restoration parameters..." --weight=1
 
-test ! -d $final_path \
-	|| ynh_die --message="There is already a directory: $final_path "
+test ! -d $final_path || ynh_die --message="There is already a directory: $final_path "
 
 #=================================================
 # STANDARD RESTORATION STEPS
@@ -73,8 +72,13 @@ ynh_script_progression --message="Restoring the PHP-FPM configuration..." --weig
 
 ynh_restore_file --origin_path="/etc/php/$phpversion/fpm/pool.d/$app.conf"
 
-# Recreate a dedicated PHP-FPM config
-ynh_add_fpm_config --package="$extra_php_dependencies"
+#=================================================
+# REINSTALL DEPENDENCIES
+#=================================================
+ynh_script_progression --message="Reinstalling dependencies..." --weight=1
+
+# Define and install dependencies
+ynh_install_app_dependencies $pkg_dependencies
 
 #=================================================
 # RESTORE THE MYSQL DATABASE

scripts/upgrade

@@ -101,6 +101,13 @@ ynh_script_progression --message="Upgrading NGINX web server configuration..." -
 # Create a dedicated NGINX config
 ynh_add_nginx_config
 
+#=================================================
+# UPGRADE DEPENDENCIES
+#=================================================
+ynh_script_progression --message="Upgrading dependencies..." --weight=1
+
+ynh_install_app_dependencies $pkg_dependencies
+
 #=================================================
 # PHP-FPM CONFIGURATION
 #=================================================