diff --git a/conf/extra_php-fpm.conf b/conf/extra_php-fpm.conf new file mode 100644 index 0000000..f796032 --- /dev/null +++ b/conf/extra_php-fpm.conf @@ -0,0 +1,4 @@ +; Additional php.ini defines, specific to this pool of workers. + +php_admin_value[upload_max_filesize] = 100M +php_admin_value[post_max_size] = 100M diff --git a/conf/nginx.conf b/conf/nginx.conf index 34250d1..2945eef 100644 --- a/conf/nginx.conf +++ b/conf/nginx.conf @@ -7,7 +7,7 @@ location __PATH__/ { index index.php; # Common parameter to increase upload size limit in conjunction with dedicated php-fpm file - #client_max_body_size 50M; + client_max_body_size 100M; try_files $uri $uri/ /index.php?it=$uri&$args; location ~ [^/]\.php(/|$) { diff --git a/conf/php-fpm.conf b/conf/php-fpm.conf deleted file mode 100644 index ab1a471..0000000 --- a/conf/php-fpm.conf +++ /dev/null @@ -1,430 +0,0 @@ -; Start a new pool named 'www'. -; the variable $pool can be used in any directive and will be replaced by the -; pool name ('www' here) -[__NAMETOCHANGE__] - -; Per pool prefix -; It only applies on the following directives: -; - 'access.log' -; - 'slowlog' -; - 'listen' (unixsocket) -; - 'chroot' -; - 'chdir' -; - 'php_values' -; - 'php_admin_values' -; When not set, the global prefix (or /usr) applies instead. -; Note: This directive can also be relative to the global prefix. -; Default Value: none -;prefix = /path/to/pools/$pool - -; Unix user/group of processes -; Note: The user is mandatory. If the group is not set, the default user's group -; will be used. -user = __USER__ -group = __USER__ - -; The address on which to accept FastCGI requests. -; Valid syntaxes are: -; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific IPv4 address on -; a specific port; -; '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on -; a specific port; -; 'port' - to listen on a TCP socket to all addresses -; (IPv6 and IPv4-mapped) on a specific port; -; '/path/to/unix/socket' - to listen on a unix socket. -; Note: This value is mandatory. -listen = /var/run/php/php__PHPVERSION__-fpm-__NAMETOCHANGE__.sock - -; Set listen(2) backlog. -; Default Value: 511 (-1 on FreeBSD and OpenBSD) -;listen.backlog = 511 - -; Set permissions for unix socket, if one is used. In Linux, read/write -; permissions must be set in order to allow connections from a web server. Many -; BSD-derived systems allow connections regardless of permissions. -; Default Values: user and group are set as the running user -; mode is set to 0660 -listen.owner = www-data -listen.group = www-data -;listen.mode = 0660 -; When POSIX Access Control Lists are supported you can set them using -; these options, value is a comma separated list of user/group names. -; When set, listen.owner and listen.group are ignored -;listen.acl_users = -;listen.acl_groups = - -; List of addresses (IPv4/IPv6) of FastCGI clients which are allowed to connect. -; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original -; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address -; must be separated by a comma. If this value is left blank, connections will be -; accepted from any ip address. -; Default Value: any -;listen.allowed_clients = 127.0.0.1 - -; Specify the nice(2) priority to apply to the pool processes (only if set) -; The value can vary from -19 (highest priority) to 20 (lower priority) -; Note: - It will only work if the FPM master process is launched as root -; - The pool processes will inherit the master process priority -; unless it specified otherwise -; Default Value: no set -; process.priority = -19 - -; Set the process dumpable flag (PR_SET_DUMPABLE prctl) even if the process user -; or group is differrent than the master process user. It allows to create process -; core dump and ptrace the process for the pool user. -; Default Value: no -; process.dumpable = yes - -; Choose how the process manager will control the number of child processes. -; Possible Values: -; static - a fixed number (pm.max_children) of child processes; -; dynamic - the number of child processes are set dynamically based on the -; following directives. With this process management, there will be -; always at least 1 children. -; pm.max_children - the maximum number of children that can -; be alive at the same time. -; pm.start_servers - the number of children created on startup. -; pm.min_spare_servers - the minimum number of children in 'idle' -; state (waiting to process). If the number -; of 'idle' processes is less than this -; number then some children will be created. -; pm.max_spare_servers - the maximum number of children in 'idle' -; state (waiting to process). If the number -; of 'idle' processes is greater than this -; number then some children will be killed. -; ondemand - no children are created at startup. Children will be forked when -; new requests will connect. The following parameter are used: -; pm.max_children - the maximum number of children that -; can be alive at the same time. -; pm.process_idle_timeout - The number of seconds after which -; an idle process will be killed. -; Note: This value is mandatory. -pm = dynamic - -; The number of child processes to be created when pm is set to 'static' and the -; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'. -; This value sets the limit on the number of simultaneous requests that will be -; served. Equivalent to the ApacheMaxClients directive with mpm_prefork. -; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP -; CGI. The below defaults are based on a server without much resources. Don't -; forget to tweak pm.* to fit your needs. -; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand' -; Note: This value is mandatory. -pm.max_children = 5 - -; The number of child processes created on startup. -; Note: Used only when pm is set to 'dynamic' -; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2 -pm.start_servers = 2 - -; The desired minimum number of idle server processes. -; Note: Used only when pm is set to 'dynamic' -; Note: Mandatory when pm is set to 'dynamic' -pm.min_spare_servers = 1 - -; The desired maximum number of idle server processes. -; Note: Used only when pm is set to 'dynamic' -; Note: Mandatory when pm is set to 'dynamic' -pm.max_spare_servers = 3 - -; The number of seconds after which an idle process will be killed. -; Note: Used only when pm is set to 'ondemand' -; Default Value: 10s -;pm.process_idle_timeout = 10s; - -; The number of requests each child process should execute before respawning. -; This can be useful to work around memory leaks in 3rd party libraries. For -; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS. -; Default Value: 0 -;pm.max_requests = 500 - -; The URI to view the FPM status page. If this value is not set, no URI will be -; recognized as a status page. It shows the following informations: -; pool - the name of the pool; -; process manager - static, dynamic or ondemand; -; start time - the date and time FPM has started; -; start since - number of seconds since FPM has started; -; accepted conn - the number of request accepted by the pool; -; listen queue - the number of request in the queue of pending -; connections (see backlog in listen(2)); -; max listen queue - the maximum number of requests in the queue -; of pending connections since FPM has started; -; listen queue len - the size of the socket queue of pending connections; -; idle processes - the number of idle processes; -; active processes - the number of active processes; -; total processes - the number of idle + active processes; -; max active processes - the maximum number of active processes since FPM -; has started; -; max children reached - number of times, the process limit has been reached, -; when pm tries to start more children (works only for -; pm 'dynamic' and 'ondemand'); -; Value are updated in real time. -; Example output: -; pool: www -; process manager: static -; start time: 01/Jul/2011:17:53:49 +0200 -; start since: 62636 -; accepted conn: 190460 -; listen queue: 0 -; max listen queue: 1 -; listen queue len: 42 -; idle processes: 4 -; active processes: 11 -; total processes: 15 -; max active processes: 12 -; max children reached: 0 -; -; By default the status page output is formatted as text/plain. Passing either -; 'html', 'xml' or 'json' in the query string will return the corresponding -; output syntax. Example: -; http://www.foo.bar/status -; http://www.foo.bar/status?json -; http://www.foo.bar/status?html -; http://www.foo.bar/status?xml -; -; By default the status page only outputs short status. Passing 'full' in the -; query string will also return status for each pool process. -; Example: -; http://www.foo.bar/status?full -; http://www.foo.bar/status?json&full -; http://www.foo.bar/status?html&full -; http://www.foo.bar/status?xml&full -; The Full status returns for each process: -; pid - the PID of the process; -; state - the state of the process (Idle, Running, ...); -; start time - the date and time the process has started; -; start since - the number of seconds since the process has started; -; requests - the number of requests the process has served; -; request duration - the duration in µs of the requests; -; request method - the request method (GET, POST, ...); -; request URI - the request URI with the query string; -; content length - the content length of the request (only with POST); -; user - the user (PHP_AUTH_USER) (or '-' if not set); -; script - the main script called (or '-' if not set); -; last request cpu - the %cpu the last request consumed -; it's always 0 if the process is not in Idle state -; because CPU calculation is done when the request -; processing has terminated; -; last request memory - the max amount of memory the last request consumed -; it's always 0 if the process is not in Idle state -; because memory calculation is done when the request -; processing has terminated; -; If the process is in Idle state, then informations are related to the -; last request the process has served. Otherwise informations are related to -; the current request being served. -; Example output: -; ************************ -; pid: 31330 -; state: Running -; start time: 01/Jul/2011:17:53:49 +0200 -; start since: 63087 -; requests: 12808 -; request duration: 1250261 -; request method: GET -; request URI: /test_mem.php?N=10000 -; content length: 0 -; user: - -; script: /home/fat/web/docs/php/test_mem.php -; last request cpu: 0.00 -; last request memory: 0 -; -; Note: There is a real-time FPM status monitoring sample web page available -; It's available in: /usr/share/php/7.0/fpm/status.html -; -; Note: The value must start with a leading slash (/). The value can be -; anything, but it may not be a good idea to use the .php extension or it -; may conflict with a real PHP file. -; Default Value: not set -;pm.status_path = /status - -; The ping URI to call the monitoring page of FPM. If this value is not set, no -; URI will be recognized as a ping page. This could be used to test from outside -; that FPM is alive and responding, or to -; - create a graph of FPM availability (rrd or such); -; - remove a server from a group if it is not responding (load balancing); -; - trigger alerts for the operating team (24/7). -; Note: The value must start with a leading slash (/). The value can be -; anything, but it may not be a good idea to use the .php extension or it -; may conflict with a real PHP file. -; Default Value: not set -;ping.path = /ping - -; This directive may be used to customize the response of a ping request. The -; response is formatted as text/plain with a 200 response code. -; Default Value: pong -;ping.response = pong - -; The access log file -; Default: not set -;access.log = log/$pool.access.log - -; The access log format. -; The following syntax is allowed -; %%: the '%' character -; %C: %CPU used by the request -; it can accept the following format: -; - %{user}C for user CPU only -; - %{system}C for system CPU only -; - %{total}C for user + system CPU (default) -; %d: time taken to serve the request -; it can accept the following format: -; - %{seconds}d (default) -; - %{miliseconds}d -; - %{mili}d -; - %{microseconds}d -; - %{micro}d -; %e: an environment variable (same as $_ENV or $_SERVER) -; it must be associated with embraces to specify the name of the env -; variable. Some exemples: -; - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e -; - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e -; %f: script filename -; %l: content-length of the request (for POST request only) -; %m: request method -; %M: peak of memory allocated by PHP -; it can accept the following format: -; - %{bytes}M (default) -; - %{kilobytes}M -; - %{kilo}M -; - %{megabytes}M -; - %{mega}M -; %n: pool name -; %o: output header -; it must be associated with embraces to specify the name of the header: -; - %{Content-Type}o -; - %{X-Powered-By}o -; - %{Transfert-Encoding}o -; - .... -; %p: PID of the child that serviced the request -; %P: PID of the parent of the child that serviced the request -; %q: the query string -; %Q: the '?' character if query string exists -; %r: the request URI (without the query string, see %q and %Q) -; %R: remote IP address -; %s: status (response code) -; %t: server time the request was received -; it can accept a strftime(3) format: -; %d/%b/%Y:%H:%M:%S %z (default) -; The strftime(3) format must be encapsuled in a %{}t tag -; e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t -; %T: time the log has been written (the request has finished) -; it can accept a strftime(3) format: -; %d/%b/%Y:%H:%M:%S %z (default) -; The strftime(3) format must be encapsuled in a %{}t tag -; e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t -; %u: remote user -; -; Default: "%R - %u %t \"%m %r\" %s" -;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%" - -; The log file for slow requests -; Default Value: not set -; Note: slowlog is mandatory if request_slowlog_timeout is set -;slowlog = log/$pool.log.slow - -; The timeout for serving a single request after which a PHP backtrace will be -; dumped to the 'slowlog' file. A value of '0s' means 'off'. -; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) -; Default Value: 0 -;request_slowlog_timeout = 0 - -; The timeout for serving a single request after which the worker process will -; be killed. This option should be used when the 'max_execution_time' ini option -; does not stop script execution for some reason. A value of '0' means 'off'. -; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) -; Default Value: 0 -request_terminate_timeout = 1d - -; Set open file descriptor rlimit. -; Default Value: system defined value -;rlimit_files = 1024 - -; Set max core size rlimit. -; Possible Values: 'unlimited' or an integer greater or equal to 0 -; Default Value: system defined value -;rlimit_core = 0 - -; Chroot to this directory at the start. This value must be defined as an -; absolute path. When this value is not set, chroot is not used. -; Note: you can prefix with '$prefix' to chroot to the pool prefix or one -; of its subdirectories. If the pool prefix is not set, the global prefix -; will be used instead. -; Note: chrooting is a great security feature and should be used whenever -; possible. However, all PHP paths will be relative to the chroot -; (error_log, sessions.save_path, ...). -; Default Value: not set -;chroot = - -; Chdir to this directory at the start. -; Note: relative path can be used. -; Default Value: current directory or / when chroot -chdir = __FINALPATH__ - -; Redirect worker stdout and stderr into main error log. If not set, stdout and -; stderr will be redirected to /dev/null according to FastCGI specs. -; Note: on highloaded environement, this can cause some delay in the page -; process time (several ms). -; Default Value: no -;catch_workers_output = yes - -; Clear environment in FPM workers -; Prevents arbitrary environment variables from reaching FPM worker processes -; by clearing the environment in workers before env vars specified in this -; pool configuration are added. -; Setting to "no" will make all environment variables available to PHP code -; via getenv(), $_ENV and $_SERVER. -; Default Value: yes -;clear_env = no - -; Limits the extensions of the main script FPM will allow to parse. This can -; prevent configuration mistakes on the web server side. You should only limit -; FPM to .php extensions to prevent malicious users to use other extensions to -; execute php code. -; Note: set an empty value to allow all extensions. -; Default Value: .php -;security.limit_extensions = .php .php3 .php4 .php5 .php7 - -; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from -; the current environment. -; Default Value: clean env -;env[HOSTNAME] = $HOSTNAME -;env[PATH] = /usr/local/bin:/usr/bin:/bin -;env[TMP] = /tmp -;env[TMPDIR] = /tmp -;env[TEMP] = /tmp - -; Additional php.ini defines, specific to this pool of workers. These settings -; overwrite the values previously defined in the php.ini. The directives are the -; same as the PHP SAPI: -; php_value/php_flag - you can set classic ini defines which can -; be overwritten from PHP call 'ini_set'. -; php_admin_value/php_admin_flag - these directives won't be overwritten by -; PHP call 'ini_set' -; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no. - -; Defining 'extension' will load the corresponding shared extension from -; extension_dir. Defining 'disable_functions' or 'disable_classes' will not -; overwrite previously defined php.ini values, but will append the new value -; instead. - -; Note: path INI options can be relative and will be expanded with the prefix -; (pool, global or /usr) - -; Default Value: nothing is defined by default except the values in php.ini and -; specified at startup with the -d argument -;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com -;php_flag[display_errors] = off -;php_admin_value[error_log] = /var/log/fpm-php.www.log -;php_admin_flag[log_errors] = on -;php_admin_value[memory_limit] = 32M - -; Common values to change to increase file upload limit -; php_admin_value[upload_max_filesize] = 50M -; php_admin_value[post_max_size] = 50M -; php_admin_flag[mail.add_x_header] = Off - -; Other common parameters -; php_admin_value[max_execution_time] = 600 -; php_admin_value[max_input_time] = 300 -; php_admin_value[memory_limit] = 256M -; php_admin_flag[short_open_tag] = On diff --git a/config_panel.toml b/config_panel.toml new file mode 100644 index 0000000..0c6e779 --- /dev/null +++ b/config_panel.toml @@ -0,0 +1,30 @@ +version = "1.0" + +[main] +name = "ProcessWire configuration" + + [main.php_fpm_config] + name = "PHP-FPM configuration" + + [main.php_fpm_config.fpm_footprint] + ask = "Memory footprint" + type = "select" + choices.low = "Low, <= 20Mb per pool" + choices.medium = "Medium, between 20Mb and 40Mb per pool" + choices.high = "High, > 40Mb per pool" + choices.specific = "Use specific value" + default = "low" + + [main.php_fpm_config.fpm_free_footprint] + visible = "fpm_footprint == 'specific'" + ask = "Memory footprint of the service?" + type = "number" + default = "0" + help = "Free field to specify exactly the footprint in Mb if you don't want to use one of the three previous values." + + [main.php_fpm_config.fpm_usage] + ask = "Expected usage" + type = "select" + choices = ["low", "medium", "high"] + default = "low" + help = "low: Personal usage, behind the SSO. No RAM footprint when not used, but the impact on the processor can be high if many users are using the service.
medium: Low usage, few people or/and publicly accessible. Low RAM footprint, medium processor footprint when used.
high: High usage, frequently visited website. High RAM footprint, but lower on processor usage and quickly responding." diff --git a/config_panel.toml.example b/config_panel.toml.example deleted file mode 100644 index c6bccd8..0000000 --- a/config_panel.toml.example +++ /dev/null @@ -1,295 +0,0 @@ - -## Config panel are available from webadmin > Apps > YOUR_APP > Config Panel Button -## Those panels let user configure some params on their apps using a friendly interface, -## and remove the need to manually edit files from the command line. - -## From a packager perspective, this .toml is coupled to the scripts/config script, -## which may be used to define custom getters/setters. However, most use cases -## should be covered automagically by the core, thus it may not be necessary -## to define a scripts/config at all! - -## ----------------------------------------------------------------------------- -## IMPORTANT: In accordance with YunoHost's spirit, please keep things simple and -## do not overwhelm the admin with tons of misunderstandable or advanced settings. -## ----------------------------------------------------------------------------- - -## The top level describe the entire config panels screen. - -## The version is a required property. -## Here a small reminder to associate config panel version with YunoHost version -## | Config | YNH | Config panel small change log | -## | ------ | --- | ------------------------------------------------------- | -## | 0.1 | 3.x | 0.1 config script not compatible with YNH >= 4.3 | -## | 1.0 | 4.3.x | The new config panel system with 'bind' property | -version = "1.0" - -## (optional) i18n property let you internationalize questions, however this feature -## is only available in core configuration panel (like yunohost domain config). -## So in app config panel this key is ignored for now, but you can internationalize -## by using a lang dictionary (see property name bellow) -# i18n = "prefix_translation_key" - -################################################################################ -#### ABOUT PANELS -################################################################################ - -## The next level describes web admin panels -## You have to choose an ID for each panel, in this example the ID is "main" -## Keep in mind this ID will be used in CLI to refer to your question, so choose -## something short and meaningfull. -## In the webadmin, each panel corresponds to a distinct tab / form -[main] - -## Define the label for your panel -## Internationalization works similarly to the 'description' and 'ask' questions in the manifest -# name.en = "Main configuration" -# name.fr = "Configuration principale" - -## (optional) If you need to trigger a service reload-or-restart after the user -## change a question in this panel, you can add your service in the list. -services = ["__APP__"] -# or services = ["nginx", "__APP__"] to also reload-or-restart nginx - -## (optional) This help properties is a short help displayed on the same line -## than the panel title but not displayed in the tab. -# help = "" - - ############################################################################ - #### ABOUT SECTIONS - ############################################################################ - - ## A panel is composed of one or several sections. - ## - ## Sections are meant to group questions together when they correspond to - ## a same subtopic. This impacts the rendering in terms of CLI prompts - ## and HTML forms - ## - ## You should choose an ID for your section, and prefix it with the panel ID - ## (Be sure to not make a typo in the panel ID, which would implicitly create - ## an other entire panel) - ## - ## We use the context of pepettes_ynh as an example, - ## which is a simple donation form app written in python, - ## and for which the admin will want to edit the configuration - [main.customization] - - ## (optional) Defining a proper title for sections is not mandatory - ## and depends on the exact rendering you're aiming for the CLI / webadmin - name = "" - - ## (optional) This help properties is a short help displayed on the same line - ## than the section title, meant to provide additional details - # help = "" - - ## (optional) As for panel, you can specify to trigger a service - ## reload-or-restart after the user change a question in this section. - ## This property is added to the panel property, it doesn't deactivate it. - ## So no need to replicate, the service list from panel services property. - # services = [] - - ## (optional) By default all questions are optionals, but you can specify a - ## default behaviour for question in the section - optional = false - - ## (optional) It's also possible with the 'visible' property to only - ## display the section depending on the user's answers to previous questions. - ## - ## Be careful that the 'visible' property should only refer to **previous** questions - ## Hence, it should not make sense to have a "visible" property on the very first section. - ## - ## Also, keep in mind that this feature only works in the webadmin and not in CLI - ## (therefore a user could be prompted in CLI for a question that may not be relevant) - # visible = true - - ######################################################################## - #### ABOUT QUESTIONS - ######################################################################## - - ## A section is compound of one or several questions. - - ## --------------------------------------------------------------------- - ## IMPORTANT: as for panel and section you have to choose an ID, but this - ## one should be unique in all this document, even if the question is in - ## an other panel. - ## --------------------------------------------------------------------- - - ## You can use same questions types and properties than in manifest.yml - ## install part. However, in YNH 4.3, a lot of change has been made to - ## extend availables questions types list. - ## See: TODO DOC LINK - - [main.customization.project_name] - - ## (required) The ask property is equivalent to the ask property in - ## the manifest. However, in config panels, questions are displayed on the - ## left side and therefore have less space to be rendered. Therefore, - ## it is better to use a short question, and use the "help" property to - ## provide additional details if necessary. - ask.en = "Name of the project" - - ## (required) The type property indicates how the question should be - ## displayed, validated and managed. Some types have specific properties. - ## - ## Types available: string, boolean, number, range, text, password, path - ## email, url, date, time, color, select, domain, user, tags, file. - ## - ## For a complete list with specific properties, see: TODO DOC LINK - type = "string" - - ######################################################################## - #### ABOUT THE BIND PROPERTY - ######################################################################## - - ## (recommended) 'bind' property is a powerful feature that let you - ## configure how and where the data will be read, validated and written. - - ## By default, 'bind property is in "settings" mode, it means it will - ## **only** read and write the value in application settings file. - ## bind = "settings" - - ## However, settings usually correspond to key/values in actual app configurations - ## Hence, a more useful mode is to have bind = ":FILENAME". In that case, YunoHost - ## will automagically find a line with "KEY=VALUE" in FILENAME - ## (with the adequate separator between KEY and VALUE) - ## - ## YunoHost will then use this value for the read/get operation. - ## During write/set operations, YunoHost will overwrite the value - ## in **both** FILENAME and in the app's settings.yml - - ## Configuration file format supported: yaml, toml, json, ini, env, php, - ## python. The feature probably works with others formats, but should be tested carefully. - - ## Note that this feature only works with relatively simple cases - ## such as `KEY: VALUE`, but won't properly work with - ## complex data structures like multilin array/lists or dictionnaries. - ## It also doesn't work with XML format, custom config function call, php define(), ... - - ## More info on TODO - # bind = ":/var/www/__APP__/settings.py" - - - ## By default, bind = ":FILENAME" will use the question ID as KEY - ## ... but the question ID may sometime not be the exact KEY name in the configuration file. - ## - ## In particular, in pepettes, the python variable is 'name' and not 'project_name' - ## (c.f. https://github.com/YunoHost-Apps/pepettes_ynh/blob/5cc2d3ffd6529cc7356ff93af92dbb6785c3ab9a/conf/settings.py##L11 ) - ## - ## In that case, the key name can be specified before the column ':' - - bind = "name:/var/www/__APP__/settings.py" - - ## --------------------------------------------------------------------- - ## IMPORTANT: other 'bind' mode exists: - ## - ## bind = "FILENAME" (with no column character before FILENAME) - ## may be used to bind to the **entire file content** (instead of a single KEY/VALUE) - ## This could be used to expose an entire configuration file, or binary files such as images - ## For example: - ## bind = "/var/www/__APP__/img/logo.png" - ## - ## bind = "null" can be used to disable reading / writing in settings. - ## This creates sort of a "virtual" or "ephemeral" question which is not related to any actual setting - ## In this mode, you are expected to define custom getter/setters/validators in scripts/config: - ## - ## getter: get__QUESTIONID() - ## setter: set__QUESTIONID() - ## validator: validate__QUESTIONID() - ## - ## You can also specify a common getter / setter / validator, with the - ## function 'bind' mode, for example here it will try to run - ## get__array_settings() first. - # bind = "array_settings()" - ## --------------------------------------------------------------------- - - ## --------------------------------------------------------------------- - ## IMPORTANT: with the exception of bind=null questions, - ## question IDs should almost **always** correspond to an app setting - ## initialized / reused during install/upgrade. - ## Not doing so may result in inconsistencies between the config panel mechanism - ## and the use of ynh_add_config - ## --------------------------------------------------------------------- - - ######################################################################## - #### OTHER GENERIC PROPERTY FOR QUESTIONS - ######################################################################## - - ## (optional) An help text for the question - help = "Fill the name of the project which will received donation" - - ## (optional) An example display as placeholder in web form - # example = "YunoHost" - - ## (optional) set to true in order to redact the value in operation logs - # redact = false - - ## (optional) A validation pattern - ## --------------------------------------------------------------------- - ## IMPORTANT: your pattern should be between simple quote, not double. - ## --------------------------------------------------------------------- - pattern.regexp = '^\w{3,30}$' - pattern.error = "The name should be at least 3 chars and less than 30 chars. Alphanumeric chars are accepted" - - ## Note: visible and optional properties are also available for questions - - - [main.customization.contact_url] - ask = "Contact url" - type = "url" - example = "mailto: contact@example.org" - help = "mailto: accepted" - pattern.regexp = '^mailto:[^@]+@[^@]+|https://$' - pattern.error = "Should be https or mailto:" - bind = ":/var/www/__APP__/settings.py" - - [main.customization.logo] - ask = "Logo" - type = "file" - accept = ".png" - help = "Fill with an already resized logo" - bind = "__FINALPATH__/img/logo.png" - - [main.customization.favicon] - ask = "Favicon" - type = "file" - accept = ".png" - help = "Fill with an already sized favicon" - bind = "__FINALPATH__/img/favicon.png" - - - [main.stripe] - name = "Stripe general info" - optional = false - - # The next alert is overwrited with a getter from the config script - [main.stripe.amount] - ask = "Donation in the month : XX € - type = "alert" - style = "success" - - [main.stripe.publishable_key] - ask = "Publishable key" - type = "string" - redact = true - help = "Indicate here the stripe publishable key" - bind = ":/var/www/__APP__/settings.py" - - [main.stripe.secret_key] - ask = "Secret key" - type = "string" - redact = true - help = "Indicate here the stripe secret key" - bind = ":/var/www/__APP__/settings.py" - - [main.stripe.prices] - ask = "Prices ID" - type = "tags" - help = """\ - Indicates here the prices ID of donation products you created in stripe interfaces. \ - Go on [Stripe products](https://dashboard.stripe.com/products) to create those donation products. \ - Fill it tag with 'FREQUENCY/CURRENCY/PRICE_ID' \ - FREQUENCY: 'one_time' or 'recuring' \ - CURRENCY: 'EUR' or 'USD' \ - PRICE_ID: ID from stripe interfaces starting with 'price_' \ - """ - pattern.regexp = '^(one_time|recuring)/(EUR|USD)/price_.*$' - pattern.error = "Please respect the format describe in help text for each price ID" diff --git a/scripts/_common.sh b/scripts/_common.sh index 8552d71..aabd30b 100644 --- a/scripts/_common.sh +++ b/scripts/_common.sh @@ -5,20 +5,10 @@ #================================================= # PHP APP SPECIFIC #================================================= -# Depending on its version, YunoHost uses different default PHP version: -## YunoHost version "11.X" => PHP 7.4 -## YunoHost version "4.X" => PHP 7.3 -# -# This behaviour can be overridden by setting the YNH_PHP_VERSION variable -#YNH_PHP_VERSION=7.3 -#YNH_PHP_VERSION=7.4 -#YNH_PHP_VERSION=8.0 -# For more information, see the PHP application helper: https://github.com/YunoHost/yunohost/blob/dev/helpers/php#L3-L6 -# Or this app package depending on PHP: https://github.com/YunoHost-Apps/grav_ynh/blob/master/scripts/_common.sh -# PHP dependencies used by the app (must be on a single line) -#php_dependencies="php$YNH_PHP_VERSION-deb1 php$YNH_PHP_VERSION-deb2" -# or, if you do not need a custom YNH_PHP_VERSION: -php_dependencies="php$YNH_DEFAULT_PHP_VERSION-gd php$YNH_DEFAULT_PHP_VERSION-mysql" + +YNH_PHP_VERSION=7.4 + +php_dependencies="php$YNH_PHP_VERSION-gd php$YNH_PHP_VERSION-mysql" # dependencies used by the app (must be on a single line) pkg_dependencies="$php_dependencies" diff --git a/scripts/config b/scripts/config index b9e79f8..91c2de7 100644 --- a/scripts/config +++ b/scripts/config @@ -1,12 +1,4 @@ #!/bin/bash -# In simple cases, you don't need a config script. - -# With a simple config_panel.toml, you can write in the app settings, in the -# upstream config file or replace complete files (logo ...) and restart services. - -# The config scripts allows you to go further, to handle specific cases -# (validation of several interdependent fields, specific getter/setter for a value, -# display dynamic informations or choices, pre-loading of config type .cube... ). #================================================= # GENERIC STARTING @@ -14,6 +6,7 @@ # IMPORT GENERIC HELPERS #================================================= +source _common.sh source /usr/share/yunohost/helpers ynh_abort_if_errors @@ -22,81 +15,81 @@ ynh_abort_if_errors # RETRIEVE ARGUMENTS #================================================= -final_path=$(ynh_app_setting_get $app final_path) +phpversion=$(ynh_app_setting_get --app=$app --key=phpversion) +current_fpm_footprint=$(ynh_app_setting_get --app=$app --key=fpm_footprint) #================================================= # SPECIFIC GETTERS FOR TOML SHORT KEY #================================================= -get__amount() { - # Here we can imagine to have an API call to stripe to know the amount of donation during a month - local amount = 200 - - # It's possible to change some properties of the question by overriding it: - if [ $amount -gt 100 ] +get__fpm_footprint() { + # Free footprint value for php-fpm + # Check if current_fpm_footprint is an integer + if [ "$current_fpm_footprint" -eq "$current_fpm_footprint" ] 2> /dev/null then - cat << EOF -style: success -value: $amount -ask: - en: A lot of donation this month: **$amount €** -EOF + echo "specific" else - cat << EOF -style: danger -value: $amount -ask: - en: Not so much donation this month: $amount € -EOF + echo "$current_fpm_footprint" fi } -get__prices() { - local prices = "$(grep "DONATION\['" "$final_path/settings.py" | sed -r "s@^DONATION\['([^']*)'\]\['([^']*)'\] = '([^']*)'@\1/\2/\3@g" | sed -z 's/\n/,/g;s/,$/\n/')" - if [ "$prices" == "," ]; +get__free_footprint() { + # Free footprint value for php-fpm + # Check if current_fpm_footprint is an integer + if [ "$current_fpm_footprint" -eq "$current_fpm_footprint" ] 2> /dev/null then - # Return YNH_NULL if you prefer to not return a value at all. - echo YNH_NULL + # If current_fpm_footprint is an integer, that's a numeric value for the footprint + echo "$current_fpm_footprint" else - echo $prices + echo "0" fi } - -#================================================= -# SPECIFIC VALIDATORS FOR TOML SHORT KEYS -#================================================= -validate__publishable_key() { - - # We can imagine here we test if the key is really a publisheable key - (is_secret_key $publishable_key) && - echo 'This key seems to be a secret key' -} - #================================================= # SPECIFIC SETTERS FOR TOML SHORT KEYS #================================================= -set__prices() { - #--------------------------------------------- - # IMPORTANT: setter are trigger only if a change is detected - #--------------------------------------------- - for price in $(echo $prices | sed "s/,/ /"); do - frequency=$(echo $price | cut -d/ -f1) - currency=$(echo $price | cut -d/ -f2) - price_id=$(echo $price | cut -d/ -f3) - sed "d/DONATION\['$frequency'\]\['$currency'\]" "$final_path/settings.py" +set__fpm_footprint() { + if [ "$fpm_footprint" != "specific" ] + then + ynh_app_setting_set --app=$app --key=fpm_footprint --value="$fpm_footprint" + fi +} - echo "DONATION['$frequency']['$currency'] = '$price_id'" >> "$final_path/settings.py" - done - - #--------------------------------------------- - # IMPORTANT: to be able to upgrade properly, you have to saved the value in settings too - #--------------------------------------------- - ynh_app_setting_set $app prices $prices +set__fpm_free_footprint() { + if [ "$fpm_footprint" = "specific" ] + then + ynh_app_setting_set --app=$app --key=fpm_footprint --value="$fpm_free_footprint" + fi } #================================================= # GENERIC FINALIZATION #================================================= + +ynh_app_config_validate() { + _ynh_app_config_validate + + if [ "${changed[fpm_usage]}" == "true" ] || [ "${changed[fpm_footprint]}" == "true" ] || [ "${changed[fpm_free_footprint]}" == "true" ]; then + # If fpm_footprint is set to 'specific', use $fpm_free_footprint value. + if [ "$fpm_footprint" = "specific" ] + then + fpm_footprint=$fpm_free_footprint + fi + + if [ "$fpm_footprint" == "0" ] + then + ynh_print_err --message="When selecting 'specific', you have to set a footprint value into the field below." + + exit 0 + fi + fi +} + +ynh_app_config_apply() { + _ynh_app_config_apply + + ynh_add_fpm_config --phpversion=$phpversion --usage=$fpm_usage --footprint=$fpm_footprint +} + ynh_app_config_run $1 diff --git a/scripts/install b/scripts/install index fd0958e..46d1cef 100755 --- a/scripts/install +++ b/scripts/install @@ -32,6 +32,10 @@ password=$YNH_APP_ARG_PASSWORD app=$YNH_APP_INSTANCE_NAME +fpm_footprint="low" +fpm_free_footprint=0 +fpm_usage="low" + #================================================= # CHECK IF THE APP CAN BE INSTALLED WITH THESE ARGS #================================================= @@ -51,6 +55,9 @@ ynh_script_progression --message="Storing installation settings..." --weight=1 ynh_app_setting_set --app=$app --key=domain --value=$domain ynh_app_setting_set --app=$app --key=path --value=$path_url ynh_app_setting_set --app=$app --key=admin --value=$admin +ynh_app_setting_set --app=$app --key=fpm_footprint --value=$fpm_footprint +ynh_app_setting_set --app=$app --key=fpm_free_footprint --value=$fpm_free_footprint +ynh_app_setting_set --app=$app --key=fpm_usage --value=$fpm_usage #================================================= # STANDARD MODIFICATIONS @@ -107,7 +114,8 @@ chown -R $app:www-data "$final_path" ynh_script_progression --message="Configuring PHP-FPM..." --weight=3 # Create a dedicated PHP-FPM config -ynh_add_fpm_config +ynh_add_fpm_config --usage=$fpm_usage --footprint=$fpm_footprint +phpversion=$(ynh_app_setting_get --app=$app --key=phpversion) #================================================= # NGINX CONFIGURATION diff --git a/scripts/restore b/scripts/restore index b798e03..8bdcad5 100755 --- a/scripts/restore +++ b/scripts/restore @@ -35,6 +35,9 @@ db_name=$(ynh_app_setting_get --app=$app --key=db_name) db_user=$db_name phpversion=$(ynh_app_setting_get --app=$app --key=phpversion) +fpm_footprint=$(ynh_app_setting_get --app=$app --key=fpm_footprint) +fpm_usage=$(ynh_app_setting_get --app=$app --key=fpm_usage) + #================================================= # CHECK IF THE APP CAN BE RESTORED #================================================= @@ -81,6 +84,9 @@ ynh_script_progression --message="Restoring the PHP-FPM configuration..." --weig ynh_restore_file --origin_path="/etc/php/$phpversion/fpm/pool.d/$app.conf" +# Recreate a dedicated php-fpm config +ynh_add_fpm_config --usage=$fpm_usage --footprint=$fpm_footprint --phpversion=$phpversion + #================================================= # RESTORE THE NGINX CONFIGURATION #================================================= diff --git a/scripts/upgrade b/scripts/upgrade index d2a5540..5fd7cab 100644 --- a/scripts/upgrade +++ b/scripts/upgrade @@ -21,6 +21,10 @@ path_url=$(ynh_app_setting_get --app=$app --key=path) final_path=$(ynh_app_setting_get --app=$app --key=final_path) db_name=$(ynh_app_setting_get --app=$app --key=db_name) +fpm_footprint=$(ynh_app_setting_get --app=$app --key=fpm_footprint) +fpm_free_footprint=$(ynh_app_setting_get --app=$app --key=fpm_free_footprint) +fpm_usage=$(ynh_app_setting_get --app=$app --key=fpm_usage) + #================================================= # CHECK VERSION #================================================= @@ -48,23 +52,23 @@ ynh_abort_if_errors #================================================= ynh_script_progression --message="Ensuring downward compatibility..." --weight=1 -# -# N.B. : the followings setting migrations snippets are provided as *EXAMPLES* -# of what you may want to do in some cases (e.g. a setting was not defined on -# some legacy installs and you therefore want to initiaze stuff during upgrade) -# +# If fpm_footprint doesn't exist, create it +if [ -z "$fpm_footprint" ]; then + fpm_footprint=low + ynh_app_setting_set --app=$app --key=fpm_footprint --value=$fpm_footprint +fi -# If db_name doesn't exist, create it -#if [ -z "$db_name" ]; then -# db_name=$(ynh_sanitize_dbid --db_name=$app) -# ynh_app_setting_set --app=$app --key=db_name --value=$db_name -#fi +# If fpm_free_footprint doesn't exist, create it +if [ -z "$fpm_free_footprint" ]; then + fpm_free_footprint=0 + ynh_app_setting_set --app=$app --key=fpm_free_footprint --value=$fpm_free_footprint +fi -# If final_path doesn't exist, create it -#if [ -z "$final_path" ]; then -# final_path=/var/www/$app -# ynh_app_setting_set --app=$app --key=final_path --value=$final_path -#fi +# If fpm_usage doesn't exist, create it +if [ -z "$fpm_usage" ]; then + fpm_usage=low + ynh_app_setting_set --app=$app --key=fpm_usage --value=$fpm_usage +fi # Cleaning legacy permissions if ynh_legacy_permissions_exists; then @@ -120,7 +124,8 @@ ynh_install_app_dependencies $pkg_dependencies ynh_script_progression --message="Upgrading PHP-FPM configuration..." --weight=1 # Create a dedicated PHP-FPM config -ynh_add_fpm_config +ynh_add_fpm_config --phpversion=$phpversion --usage=$fpm_usage --footprint=$fpm_footprint +phpversion=$(ynh_app_setting_get --app=$app --key=phpversion) #================================================= # NGINX CONFIGURATION