diff --git a/conf/nginx.conf b/conf/nginx.conf index 729c27d..5dc0acc 100644 --- a/conf/nginx.conf +++ b/conf/nginx.conf @@ -17,7 +17,7 @@ location __PATH__/ { location ~ [^/]\.php(/|$) { fastcgi_split_path_info ^(.+?\.php)(/.*)$; - fastcgi_pass unix:/var/run/php5-fpm-__NAME__.sock; + fastcgi_pass unix:/var/run/php/php7.0-fpm-__NAME__.sock; fastcgi_index index.php; fastcgi_param REMOTE_USER $remote_user; fastcgi_param PATH_INFO $fastcgi_path_info; diff --git a/conf/php-fpm.conf b/conf/php-fpm.conf index cec73f5..2b5d7b2 100644 --- a/conf/php-fpm.conf +++ b/conf/php-fpm.conf @@ -1,10 +1,11 @@ ; Start a new pool named 'www'. -; the variable $pool can we used in any directive and will be replaced by the +; the variable $pool can be used in any directive and will be replaced by the ; pool name ('www' here) [__NAMETOCHANGE__] ; Per pool prefix ; It only applies on the following directives: +; - 'access.log' ; - 'slowlog' ; - 'listen' (unixsocket) ; - 'chroot' @@ -24,28 +25,35 @@ group = __USER__ ; The address on which to accept FastCGI requests. ; Valid syntaxes are: -; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific address on +; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific IPv4 address on ; a specific port; -; 'port' - to listen on a TCP socket to all addresses on a -; specific port; +; '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on +; a specific port; +; 'port' - to listen on a TCP socket to all addresses +; (IPv6 and IPv4-mapped) on a specific port; ; '/path/to/unix/socket' - to listen on a unix socket. ; Note: This value is mandatory. -listen = /var/run/php5-fpm-__NAMETOCHANGE__.sock +listen = /var/run/php/php7.0-fpm-__NAMETOCHANGE__.sock ; Set listen(2) backlog. -; Default Value: 128 (-1 on FreeBSD and OpenBSD) -;listen.backlog = 128 +; Default Value: 511 (-1 on FreeBSD and OpenBSD) +;listen.backlog = 511 ; Set permissions for unix socket, if one is used. In Linux, read/write ; permissions must be set in order to allow connections from a web server. Many -; BSD-derived systems allow connections regardless of permissions. +; BSD-derived systems allow connections regardless of permissions. ; Default Values: user and group are set as the running user ; mode is set to 0660 listen.owner = www-data listen.group = www-data ;listen.mode = 0660 - -; List of ipv4 addresses of FastCGI clients which are allowed to connect. +; When POSIX Access Control Lists are supported you can set them using +; these options, value is a comma separated list of user/group names. +; When set, listen.owner and listen.group are ignored +;listen.acl_users = +;listen.acl_groups = + +; List of addresses (IPv4/IPv6) of FastCGI clients which are allowed to connect. ; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original ; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address ; must be separated by a comma. If this value is left blank, connections will be @@ -59,7 +67,13 @@ listen.group = www-data ; - The pool processes will inherit the master process priority ; unless it specified otherwise ; Default Value: no set -; priority = -19 +; process.priority = -19 + +; Set the process dumpable flag (PR_SET_DUMPABLE prctl) even if the process user +; or group is differrent than the master process user. It allows to create process +; core dump and ptrace the process for the pool user. +; Default Value: no +; process.dumpable = yes ; Choose how the process manager will control the number of child processes. ; Possible Values: @@ -96,7 +110,7 @@ pm = dynamic ; forget to tweak pm.* to fit your needs. ; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand' ; Note: This value is mandatory. -pm.max_children = 10 +pm.max_children = 5 ; The number of child processes created on startup. ; Note: Used only when pm is set to 'dynamic' @@ -117,12 +131,12 @@ pm.max_spare_servers = 3 ; Note: Used only when pm is set to 'ondemand' ; Default Value: 10s ;pm.process_idle_timeout = 10s; - + ; The number of requests each child process should execute before respawning. ; This can be useful to work around memory leaks in 3rd party libraries. For ; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS. ; Default Value: 0 -pm.max_requests = 500 +;pm.max_requests = 500 ; The URI to view the FPM status page. If this value is not set, no URI will be ; recognized as a status page. It shows the following informations: @@ -170,7 +184,7 @@ pm.max_requests = 500 ; ; By default the status page only outputs short status. Passing 'full' in the ; query string will also return status for each pool process. -; Example: +; Example: ; http://www.foo.bar/status?full ; http://www.foo.bar/status?json&full ; http://www.foo.bar/status?html&full @@ -215,14 +229,14 @@ pm.max_requests = 500 ; last request memory: 0 ; ; Note: There is a real-time FPM status monitoring sample web page available -; It's available in: ${prefix}/share/fpm/status.html +; It's available in: /usr/share/php/7.0/fpm/status.html ; ; Note: The value must start with a leading slash (/). The value can be ; anything, but it may not be a good idea to use the .php extension or it ; may conflict with a real PHP file. -; Default Value: not set +; Default Value: not set ;pm.status_path = /status - + ; The ping URI to call the monitoring page of FPM. If this value is not set, no ; URI will be recognized as a ping page. This could be used to test from outside ; that FPM is alive and responding, or to @@ -275,7 +289,7 @@ pm.max_requests = 500 ; - %{megabytes}M ; - %{mega}M ; %n: pool name -; %o: ouput header +; %o: output header ; it must be associated with embraces to specify the name of the header: ; - %{Content-Type}o ; - %{X-Powered-By}o @@ -283,7 +297,7 @@ pm.max_requests = 500 ; - .... ; %p: PID of the child that serviced the request ; %P: PID of the parent of the child that serviced the request -; %q: the query string +; %q: the query string ; %Q: the '?' character if query string exists ; %r: the request URI (without the query string, see %q and %Q) ; %R: remote IP address @@ -291,72 +305,85 @@ pm.max_requests = 500 ; %t: server time the request was received ; it can accept a strftime(3) format: ; %d/%b/%Y:%H:%M:%S %z (default) +; The strftime(3) format must be encapsuled in a %{}t tag +; e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t ; %T: time the log has been written (the request has finished) ; it can accept a strftime(3) format: ; %d/%b/%Y:%H:%M:%S %z (default) +; The strftime(3) format must be encapsuled in a %{}t tag +; e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t ; %u: remote user ; ; Default: "%R - %u %t \"%m %r\" %s" ;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%" - + ; The log file for slow requests ; Default Value: not set ; Note: slowlog is mandatory if request_slowlog_timeout is set -slowlog = /var/log/nginx/__NAMETOCHANGE__.slow.log - +;slowlog = log/$pool.log.slow + ; The timeout for serving a single request after which a PHP backtrace will be ; dumped to the 'slowlog' file. A value of '0s' means 'off'. ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) ; Default Value: 0 -request_slowlog_timeout = 5s - +;request_slowlog_timeout = 0 + ; The timeout for serving a single request after which the worker process will ; be killed. This option should be used when the 'max_execution_time' ini option ; does not stop script execution for some reason. A value of '0' means 'off'. ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) ; Default Value: 0 request_terminate_timeout = 1d - + ; Set open file descriptor rlimit. ; Default Value: system defined value ;rlimit_files = 1024 - + ; Set max core size rlimit. ; Possible Values: 'unlimited' or an integer greater or equal to 0 ; Default Value: system defined value ;rlimit_core = 0 - + ; Chroot to this directory at the start. This value must be defined as an ; absolute path. When this value is not set, chroot is not used. ; Note: you can prefix with '$prefix' to chroot to the pool prefix or one ; of its subdirectories. If the pool prefix is not set, the global prefix ; will be used instead. -; Note: chrooting is a great security feature and should be used whenever +; Note: chrooting is a great security feature and should be used whenever ; possible. However, all PHP paths will be relative to the chroot ; (error_log, sessions.save_path, ...). ; Default Value: not set -;chroot = - +;chroot = + ; Chdir to this directory at the start. ; Note: relative path can be used. ; Default Value: current directory or / when chroot chdir = __FINALPATH__ - + ; Redirect worker stdout and stderr into main error log. If not set, stdout and ; stderr will be redirected to /dev/null according to FastCGI specs. ; Note: on highloaded environement, this can cause some delay in the page ; process time (several ms). ; Default Value: no -catch_workers_output = yes +;catch_workers_output = yes + +; Clear environment in FPM workers +; Prevents arbitrary environment variables from reaching FPM worker processes +; by clearing the environment in workers before env vars specified in this +; pool configuration are added. +; Setting to "no" will make all environment variables available to PHP code +; via getenv(), $_ENV and $_SERVER. +; Default Value: yes +;clear_env = no ; Limits the extensions of the main script FPM will allow to parse. This can ; prevent configuration mistakes on the web server side. You should only limit ; FPM to .php extensions to prevent malicious users to use other extensions to -; exectute php code. +; execute php code. ; Note: set an empty value to allow all extensions. ; Default Value: .php -;security.limit_extensions = .php .php3 .php4 .php5 - +;security.limit_extensions = .php .php3 .php4 .php5 .php7 + ; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from ; the current environment. ; Default Value: clean env @@ -370,7 +397,7 @@ catch_workers_output = yes ; overwrite the values previously defined in the php.ini. The directives are the ; same as the PHP SAPI: ; php_value/php_flag - you can set classic ini defines which can -; be overwritten from PHP call 'ini_set'. +; be overwritten from PHP call 'ini_set'. ; php_admin_value/php_admin_flag - these directives won't be overwritten by ; PHP call 'ini_set' ; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no. @@ -391,5 +418,16 @@ catch_workers_output = yes ;php_admin_flag[log_errors] = on ;php_admin_value[memory_limit] = 32M +; Common values to change to increase file upload limit +; php_admin_value[upload_max_filesize] = 50M +; php_admin_value[post_max_size] = 50M +; php_admin_flag[mail.add_x_header] = Off + +; Other common parameters +; php_admin_value[max_execution_time] = 600 +; php_admin_value[max_input_time] = 300 +; php_admin_value[memory_limit] = 256M +; php_admin_flag[short_open_tag] = On + php_admin_value[upload_max_filesize] = 30M php_admin_value[post_max_size] = 30M diff --git a/manifest.json b/manifest.json index 330e323..1c93296 100644 --- a/manifest.json +++ b/manifest.json @@ -19,7 +19,7 @@ "multi_instance": true, "services": [ "nginx", - "php5-fpm", + "php7.0-fpm", "mysql" ], "arguments": { diff --git a/scripts/backup b/scripts/backup index 8d583c5..271844f 100644 --- a/scripts/backup +++ b/scripts/backup @@ -48,7 +48,7 @@ ynh_backup "/etc/nginx/conf.d/$domain.d/$app.conf" #================================================= ynh_print_info "Backing up php-fpm configuration..." -ynh_backup "/etc/php5/fpm/pool.d/$app.conf" +ynh_backup "/etc/php/7.0/fpm/pool.d/$app.conf" #================================================= # BACKUP THE MYSQL DATABASE diff --git a/scripts/restore b/scripts/restore index 39fd866..952928a 100644 --- a/scripts/restore +++ b/scripts/restore @@ -101,7 +101,7 @@ ynh_mysql_connect_as $db_name $db_pwd $db_name < ./db.sql #================================================= ynh_print_info "Reloading nginx web server and php-fpm..." -systemctl reload php5-fpm +systemctl reload php7.0-fpm systemctl reload nginx #=================================================