Fix

.github/ISSUE_TEMPLATE.md

@@ -1,22 +1,24 @@
 ---
 name: Bug report
-about: Create a report to help us debug, it would be nice to fill the template as much as you can to help us, help you and help us all.
+about: When creating a bug report, please use the following template to provide all the relevant information and help debugging efficiently.
 
 ---
 
 **How to post a meaningful bug report**
 1. *Read this whole template first.*
 2. *Determine if you are on the right place:*
-   - *If you were performing an action on the app from the webadmin or the CLI (install, update, backup, restore, change url...), you are on the right place!*
+   - *If you were performing an action on the app from the webadmin or the CLI (install, update, backup, restore, change_url...), you are on the right place!*
-   - *Otherwise, the issue may be due to SPFtoolbox itself. Refer to its documentation or repository for help.*
+   - *Otherwise, the issue may be due to the app itself. Refer to its documentation or repository for help.*
-   - *If you have a doubt, post here, we will figure it out together.*
+   - *When in doubt, post here and we will figure it out together.*
 3. *Delete the italic comments as you write over them below, and remove this guide.*
 --- 
 
-**Describe the bug**
+### Describe the bug
+
 *A clear and concise description of what the bug is.*
 
-**Versions**
+### Context
+
 - Hardware: *VPS bought online / Old laptop or computer / Raspberry Pi at home / Internet Cube with VPN / Other ARM board / ...*
 - YunoHost version: x.x.x
 - I have access to my server: *Through SSH | through the webadmin | direct access via keyboard / screen | ...*
@@ -25,22 +27,29 @@ about: Create a report to help us debug, it would be nice to fill the template a
 - Using, or trying to install package version/branch:
 - If upgrading, current package version: *can be found in the admin, or with `yunohost app info $app_id`*
 
-**To Reproduce**
+### Steps to reproduce
-*Steps to reproduce the behavior.*
+
 - *If you performed a command from the CLI, the command itself is enough. For example:*
     ```sh
-    sudo yunohost app install spftoolbox
+    sudo yunohost app install the_app
     ```
 - *If you used the webadmin, please perform the equivalent command from the CLI first.*
 - *If the error occurs in your browser, explain what you did:*
    1. *Go to '...'*
-   2. *Click on '....'*
+   2. *Click on '...'*
-   3. *Scroll down to '....'*
+   3. *Scroll down to '...'*
    4. *See error*
 
-**Expected behavior**
+### Expected behavior
+
 *A clear and concise description of what you expected to happen. You can remove this section if the command above is enough to understand your intent.*
 
-**Logs**
+### Logs
-*After a failed command, YunoHost makes the log available to you, but also to others, thanks to `yunohost log display [log name] --share`. The actual command, with the correct log name, is displayed at the end of the failed attempt in the CLI. Execute it and copy here the share link it outputs.*
+
+*When an operation fails, YunoHost provides a simple way to share the logs.*
+- *In the webadmin, the error message contains a link to the relevant log page. On that page, you will be able to 'Share with Yunopaste'. If you missed it, the logs of previous operations are also available under Tools > Logs.*
+- *In command line, the command to share the logs is displayed at the end of the operation and looks like `yunohost log display [log name] --share`. If you missed it, you can find the log ID of a previous operation using `yunohost log list`.*
+
+*After sharing the log, please copypaste directly the link provided by YunoHost (to help readability, no need to copypaste the entire content of the log here, just the link is enough...)*
+
 *If applicable and useful, add screenshots to help explain your problem.*

.github/PULL_REQUEST_TEMPLATE.md

@@ -0,0 +1,16 @@
+## Problem
+
+- *Description of why you made this PR*
+
+## Solution
+
+- *And how do you fix that problem*
+
+## PR Status
+
+- [ ] Code finished and ready to be reviewed/tested
+- [ ] The fix/enhancement were manually tested (if applicable)
+
+## Automatic tests
+
+Automatic tests can be triggered on https://ci-apps-dev.yunohost.org/ *after creating the PR*, by commenting "!testme", "!gogogadgetoci" or "By the power of systemd, I invoke The Great App CI to test this Pull Request!". (N.B. : for this to work you need to be a member of the Yunohost-Apps organization)

check_process

@@ -11,9 +11,15 @@
 		setup_private=1
 		setup_public=1
 		upgrade=1
+		#upgrade=1	from_commit=CommitHash
 		backup_restore=1
 		multi_instance=1
-		change_url=0
+		change_url=1
 ;;; Options
 Email=
 Notification=none
+;;; Upgrade options
+	; commit=CommitHash
+		name=Name and date of the commit.
+		manifest_arg=domain=DOMAIN&path=PATH&admin=USER&language=fr&is_public=1&password=pass&port=666&
+

manifest.json

@@ -6,7 +6,7 @@
         "en": "Application to check Domain Name settings.",
         "fr": "Application qui permet de tester son nom de domaine."
     },
-    "version": "1.1~ynh2",
+    "version": "2.1.1~ynh1",
     "url": "http://spftoolbox.com/",
     "license": "MIT",
     "maintainer": {

pull_request_template.md

@@ -1,18 +0,0 @@
-## Problem
-- *Description of why you made this PR*
-
-## Solution
-- *And how do you fix that problem*
-
-## PR Status
-- [ ] Code finished.
-- [ ] Tested with Package_check.
-- [ ] Fix or enhancement tested.
-- [ ] Upgrade from last version tested.
-- [ ] Can be reviewed and tested.
-
-## Package_check results
----
-*If you have access to [App Continuous Integration for packagers](https://yunohost.org/#/packaging_apps_ci) you can provide a link to the package_check results like below, replacing '-NUM-' in this link by the PR number and USERNAME by your username on the ci-apps-dev. Or you provide a screenshot or a pastebin of the results*
-
-[![Build Status](https://ci-apps-dev.yunohost.org/jenkins/job/spftoolbox_ynh%20PR-NUM-%20(USERNAME)/badge/icon)](https://ci-apps-dev.yunohost.org/jenkins/job/spftoolbox_ynh%20PR-NUM-%20(USERNAME)/)  

scripts/change_url

@@ -0,0 +1,105 @@
+#!/bin/bash
+
+#=================================================
+# GENERIC STARTING
+#=================================================
+# IMPORT GENERIC HELPERS
+#=================================================
+
+source _common.sh
+source /usr/share/yunohost/helpers
+
+#=================================================
+# RETRIEVE ARGUMENTS
+#=================================================
+
+old_domain=$YNH_APP_OLD_DOMAIN
+old_path=$YNH_APP_OLD_PATH
+
+new_domain=$YNH_APP_NEW_DOMAIN
+new_path=$YNH_APP_NEW_PATH
+
+app=$YNH_APP_INSTANCE_NAME
+
+#=================================================
+# LOAD SETTINGS
+#=================================================
+ynh_script_progression --message="Loading installation settings..." --time --weight=1
+
+# Needed for helper "ynh_add_nginx_config"
+final_path=$(ynh_app_setting_get --app=$app --key=final_path)
+
+#=================================================
+# BACKUP BEFORE CHANGE URL THEN ACTIVE TRAP
+#=================================================
+ynh_script_progression --message="Backing up the app before changing its URL (may take a while)..." --time --weight=1
+
+# Backup the current version of the app
+ynh_backup_before_upgrade
+ynh_clean_setup () {
+	# Remove the new domain config file, the remove script won't do it as it doesn't know yet its location.
+	ynh_secure_remove --file="/etc/nginx/conf.d/$new_domain.d/$app.conf"
+
+	# Restore it if the upgrade fails
+	ynh_restore_upgradebackup
+}
+# Exit if an error occurs during the execution of the script
+ynh_abort_if_errors
+
+#=================================================
+# CHECK WHICH PARTS SHOULD BE CHANGED
+#=================================================
+
+change_domain=0
+if [ "$old_domain" != "$new_domain" ]
+then
+	change_domain=1
+fi
+
+change_path=0
+if [ "$old_path" != "$new_path" ]
+then
+	change_path=1
+fi
+
+#=================================================
+# MODIFY URL IN NGINX CONF
+#=================================================
+ynh_script_progression --message="Updating NGINX web server configuration..." --time --weight=1
+
+nginx_conf_path=/etc/nginx/conf.d/$old_domain.d/$app.conf
+
+# Change the path in the NGINX config file
+if [ $change_path -eq 1 ]
+then
+	# Make a backup of the original NGINX config file if modified
+	ynh_backup_if_checksum_is_different --file="$nginx_conf_path"
+	# Set global variables for NGINX helper
+	domain="$old_domain"
+	path_url="$new_path"
+	# Create a dedicated NGINX config
+	ynh_add_nginx_config
+fi
+
+# Change the domain for NGINX
+if [ $change_domain -eq 1 ]
+then
+	# Delete file checksum for the old conf file location
+	ynh_delete_file_checksum --file="$nginx_conf_path"
+	mv $nginx_conf_path /etc/nginx/conf.d/$new_domain.d/$app.conf
+	# Store file checksum for the new config file location
+	ynh_store_file_checksum --file="/etc/nginx/conf.d/$new_domain.d/$app.conf"
+fi
+
+#=================================================
+# RELOAD NGINX
+#=================================================
+ynh_script_progression --message="Reloading NGINX web server..." --weight=1
+
+ynh_systemd_action --service_name=nginx --action=reload
+
+#=================================================
+# END OF SCRIPT
+#=================================================
+
+ynh_script_progression --message="Change of URL completed for $app" --last

scripts/install

@@ -44,7 +44,6 @@ ynh_script_progression --message="Storing installation settings..."
 
 ynh_app_setting_set --app=$app --key=domain --value=$domain
 ynh_app_setting_set --app=$app --key=path --value=$path_url
-ynh_app_setting_set --app=$app --key=is_public --value=$is_public
 
 #=================================================
 # STANDARD MODIFICATIONS
@@ -79,7 +78,7 @@ chown -R $app:www-data "$final_path"
 #=================================================
 # NGINX CONFIGURATION
 #=================================================
-ynh_script_progression --message="Configuring nginx web server..."
+ynh_script_progression --message="Configuring NGINX web server..."
 
 # Create a dedicated nginx config
 ynh_add_nginx_config
@@ -87,7 +86,7 @@ ynh_add_nginx_config
 #=================================================
 # PHP-FPM CONFIGURATION
 #=================================================
-ynh_script_progression --message="Configuring php-fpm..."
+ynh_script_progression --message="Configuring PHP-FPM..."
 
 # Create a dedicated php-fpm config
 ynh_add_fpm_config

scripts/remove

@@ -40,7 +40,7 @@ ynh_secure_remove --file="$final_path"
 #=================================================
 # REMOVE NGINX CONFIGURATION
 #=================================================
-ynh_script_progression --message="Removing nginx web server configuration..."
+ynh_script_progression --message="Removing NGINX web server configuration..."
 
 # Remove the dedicated nginx config
 ynh_remove_nginx_config
@@ -48,7 +48,7 @@ ynh_remove_nginx_config
 #=================================================
 # REMOVE PHP-FPM CONFIGURATION
 #=================================================
-ynh_script_progression --message="Removing php-fpm configuration..."
+ynh_script_progression --message="Removing PHP-FPM configuration..."
 
 # Remove the dedicated php-fpm config
 ynh_remove_fpm_config

scripts/restore

@@ -44,7 +44,7 @@ test ! -d $final_path \
 #=================================================
 # RESTORE THE NGINX CONFIGURATION
 #=================================================
-ynh_script_progression --message="Restoring the nginx configuration..."
+ynh_script_progression --message="Restoring the NGINX configuration..."
 
 ynh_restore_file --origin_path="/etc/nginx/conf.d/$domain.d/$app.conf"
 
@@ -97,7 +97,7 @@ ynh_restore_file --origin_path="/etc/logrotate.d/$app"
 #=================================================
 # RELOAD NGINX AND PHP-FPM
 #=================================================
-ynh_script_progression --message="Reloading Nginx web server and php-fpm..."
+ynh_script_progression --message="Reloading NGINX web server and PHP-FPM..."
 
 ynh_systemd_action --service_name=php$phpversion-fpm --action=reload
 ynh_systemd_action --service_name=nginx --action=reload

scripts/upgrade

@@ -98,7 +98,7 @@ ynh_install_app_dependencies $pkg_dependencies
 #=================================================
 # PHP-FPM CONFIGURATION
 #=================================================
-ynh_script_progression --message="Upgrading php-fpm configuration..."
+ynh_script_progression --message="Upgrading PHP-FPM configuration..."
 
 # Create a dedicated php-fpm config
 ynh_add_fpm_config
@@ -116,7 +116,7 @@ ynh_use_logrotate --non-append
 #=================================================
 # RELOAD NGINX
 #=================================================
-ynh_script_progression --message="Reloading nginx web server..."
+ynh_script_progression --message="Reloading NGINX web server..."
 
 ynh_systemd_action --service_name=nginx --action=reload