diff --git a/conf/extra_php-fpm.conf b/conf/extra_php-fpm.conf new file mode 100644 index 0000000..700c37c --- /dev/null +++ b/conf/extra_php-fpm.conf @@ -0,0 +1,4 @@ +; Additional php.ini defines, specific to this pool of workers. + +php_admin_value[upload_max_filesize] = 50M +php_admin_value[post_max_size] = 50M diff --git a/conf/nginx.conf b/conf/nginx.conf index ce8161b..6b6e3c9 100644 --- a/conf/nginx.conf +++ b/conf/nginx.conf @@ -6,7 +6,7 @@ location __PATH__/ { index index.php; - client_max_body_size 30M; + client_max_body_size 50M; try_files $uri $uri/ index.php; diff --git a/conf/php-fpm.conf b/conf/php-fpm.conf deleted file mode 100644 index 1cf8768..0000000 --- a/conf/php-fpm.conf +++ /dev/null @@ -1,430 +0,0 @@ -; Start a new pool named 'www'. -; the variable $pool can be used in any directive and will be replaced by the -; pool name ('www' here) -[__NAMETOCHANGE__] - -; Per pool prefix -; It only applies on the following directives: -; - 'access.log' -; - 'slowlog' -; - 'listen' (unixsocket) -; - 'chroot' -; - 'chdir' -; - 'php_values' -; - 'php_admin_values' -; When not set, the global prefix (or /usr) applies instead. -; Note: This directive can also be relative to the global prefix. -; Default Value: none -;prefix = /path/to/pools/$pool - -; Unix user/group of processes -; Note: The user is mandatory. If the group is not set, the default user's group -; will be used. -user = __USER__ -group = __USER__ - -; The address on which to accept FastCGI requests. -; Valid syntaxes are: -; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific IPv4 address on -; a specific port; -; '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on -; a specific port; -; 'port' - to listen on a TCP socket to all addresses -; (IPv6 and IPv4-mapped) on a specific port; -; '/path/to/unix/socket' - to listen on a unix socket. -; Note: This value is mandatory. -listen = /var/run/php/php__PHPVERSION__-fpm-__NAMETOCHANGE__.sock - -; Set listen(2) backlog. -; Default Value: 511 (-1 on FreeBSD and OpenBSD) -;listen.backlog = 511 - -; Set permissions for unix socket, if one is used. In Linux, read/write -; permissions must be set in order to allow connections from a web server. Many -; BSD-derived systems allow connections regardless of permissions. -; Default Values: user and group are set as the running user -; mode is set to 0660 -listen.owner = www-data -listen.group = www-data -;listen.mode = 0660 -; When POSIX Access Control Lists are supported you can set them using -; these options, value is a comma separated list of user/group names. -; When set, listen.owner and listen.group are ignored -;listen.acl_users = -;listen.acl_groups = - -; List of addresses (IPv4/IPv6) of FastCGI clients which are allowed to connect. -; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original -; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address -; must be separated by a comma. If this value is left blank, connections will be -; accepted from any ip address. -; Default Value: any -;listen.allowed_clients = 127.0.0.1 - -; Specify the nice(2) priority to apply to the pool processes (only if set) -; The value can vary from -19 (highest priority) to 20 (lower priority) -; Note: - It will only work if the FPM master process is launched as root -; - The pool processes will inherit the master process priority -; unless it specified otherwise -; Default Value: no set -; process.priority = -19 - -; Set the process dumpable flag (PR_SET_DUMPABLE prctl) even if the process user -; or group is differrent than the master process user. It allows to create process -; core dump and ptrace the process for the pool user. -; Default Value: no -; process.dumpable = yes - -; Choose how the process manager will control the number of child processes. -; Possible Values: -; static - a fixed number (pm.max_children) of child processes; -; dynamic - the number of child processes are set dynamically based on the -; following directives. With this process management, there will be -; always at least 1 children. -; pm.max_children - the maximum number of children that can -; be alive at the same time. -; pm.start_servers - the number of children created on startup. -; pm.min_spare_servers - the minimum number of children in 'idle' -; state (waiting to process). If the number -; of 'idle' processes is less than this -; number then some children will be created. -; pm.max_spare_servers - the maximum number of children in 'idle' -; state (waiting to process). If the number -; of 'idle' processes is greater than this -; number then some children will be killed. -; ondemand - no children are created at startup. Children will be forked when -; new requests will connect. The following parameter are used: -; pm.max_children - the maximum number of children that -; can be alive at the same time. -; pm.process_idle_timeout - The number of seconds after which -; an idle process will be killed. -; Note: This value is mandatory. -pm = dynamic - -; The number of child processes to be created when pm is set to 'static' and the -; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'. -; This value sets the limit on the number of simultaneous requests that will be -; served. Equivalent to the ApacheMaxClients directive with mpm_prefork. -; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP -; CGI. The below defaults are based on a server without much resources. Don't -; forget to tweak pm.* to fit your needs. -; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand' -; Note: This value is mandatory. -pm.max_children = 5 - -; The number of child processes created on startup. -; Note: Used only when pm is set to 'dynamic' -; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2 -pm.start_servers = 2 - -; The desired minimum number of idle server processes. -; Note: Used only when pm is set to 'dynamic' -; Note: Mandatory when pm is set to 'dynamic' -pm.min_spare_servers = 1 - -; The desired maximum number of idle server processes. -; Note: Used only when pm is set to 'dynamic' -; Note: Mandatory when pm is set to 'dynamic' -pm.max_spare_servers = 3 - -; The number of seconds after which an idle process will be killed. -; Note: Used only when pm is set to 'ondemand' -; Default Value: 10s -;pm.process_idle_timeout = 10s; - -; The number of requests each child process should execute before respawning. -; This can be useful to work around memory leaks in 3rd party libraries. For -; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS. -; Default Value: 0 -;pm.max_requests = 500 - -; The URI to view the FPM status page. If this value is not set, no URI will be -; recognized as a status page. It shows the following informations: -; pool - the name of the pool; -; process manager - static, dynamic or ondemand; -; start time - the date and time FPM has started; -; start since - number of seconds since FPM has started; -; accepted conn - the number of request accepted by the pool; -; listen queue - the number of request in the queue of pending -; connections (see backlog in listen(2)); -; max listen queue - the maximum number of requests in the queue -; of pending connections since FPM has started; -; listen queue len - the size of the socket queue of pending connections; -; idle processes - the number of idle processes; -; active processes - the number of active processes; -; total processes - the number of idle + active processes; -; max active processes - the maximum number of active processes since FPM -; has started; -; max children reached - number of times, the process limit has been reached, -; when pm tries to start more children (works only for -; pm 'dynamic' and 'ondemand'); -; Value are updated in real time. -; Example output: -; pool: www -; process manager: static -; start time: 01/Jul/2011:17:53:49 +0200 -; start since: 62636 -; accepted conn: 190460 -; listen queue: 0 -; max listen queue: 1 -; listen queue len: 42 -; idle processes: 4 -; active processes: 11 -; total processes: 15 -; max active processes: 12 -; max children reached: 0 -; -; By default the status page output is formatted as text/plain. Passing either -; 'html', 'xml' or 'json' in the query string will return the corresponding -; output syntax. Example: -; http://www.foo.bar/status -; http://www.foo.bar/status?json -; http://www.foo.bar/status?html -; http://www.foo.bar/status?xml -; -; By default the status page only outputs short status. Passing 'full' in the -; query string will also return status for each pool process. -; Example: -; http://www.foo.bar/status?full -; http://www.foo.bar/status?json&full -; http://www.foo.bar/status?html&full -; http://www.foo.bar/status?xml&full -; The Full status returns for each process: -; pid - the PID of the process; -; state - the state of the process (Idle, Running, ...); -; start time - the date and time the process has started; -; start since - the number of seconds since the process has started; -; requests - the number of requests the process has served; -; request duration - the duration in µs of the requests; -; request method - the request method (GET, POST, ...); -; request URI - the request URI with the query string; -; content length - the content length of the request (only with POST); -; user - the user (PHP_AUTH_USER) (or '-' if not set); -; script - the main script called (or '-' if not set); -; last request cpu - the %cpu the last request consumed -; it's always 0 if the process is not in Idle state -; because CPU calculation is done when the request -; processing has terminated; -; last request memory - the max amount of memory the last request consumed -; it's always 0 if the process is not in Idle state -; because memory calculation is done when the request -; processing has terminated; -; If the process is in Idle state, then informations are related to the -; last request the process has served. Otherwise informations are related to -; the current request being served. -; Example output: -; ************************ -; pid: 31330 -; state: Running -; start time: 01/Jul/2011:17:53:49 +0200 -; start since: 63087 -; requests: 12808 -; request duration: 1250261 -; request method: GET -; request URI: /test_mem.php?N=10000 -; content length: 0 -; user: - -; script: /home/fat/web/docs/php/test_mem.php -; last request cpu: 0.00 -; last request memory: 0 -; -; Note: There is a real-time FPM status monitoring sample web page available -; It's available in: /usr/share/php/7.0/fpm/status.html -; -; Note: The value must start with a leading slash (/). The value can be -; anything, but it may not be a good idea to use the .php extension or it -; may conflict with a real PHP file. -; Default Value: not set -;pm.status_path = /status - -; The ping URI to call the monitoring page of FPM. If this value is not set, no -; URI will be recognized as a ping page. This could be used to test from outside -; that FPM is alive and responding, or to -; - create a graph of FPM availability (rrd or such); -; - remove a server from a group if it is not responding (load balancing); -; - trigger alerts for the operating team (24/7). -; Note: The value must start with a leading slash (/). The value can be -; anything, but it may not be a good idea to use the .php extension or it -; may conflict with a real PHP file. -; Default Value: not set -;ping.path = /ping - -; This directive may be used to customize the response of a ping request. The -; response is formatted as text/plain with a 200 response code. -; Default Value: pong -;ping.response = pong - -; The access log file -; Default: not set -;access.log = log/$pool.access.log - -; The access log format. -; The following syntax is allowed -; %%: the '%' character -; %C: %CPU used by the request -; it can accept the following format: -; - %{user}C for user CPU only -; - %{system}C for system CPU only -; - %{total}C for user + system CPU (default) -; %d: time taken to serve the request -; it can accept the following format: -; - %{seconds}d (default) -; - %{miliseconds}d -; - %{mili}d -; - %{microseconds}d -; - %{micro}d -; %e: an environment variable (same as $_ENV or $_SERVER) -; it must be associated with embraces to specify the name of the env -; variable. Some exemples: -; - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e -; - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e -; %f: script filename -; %l: content-length of the request (for POST request only) -; %m: request method -; %M: peak of memory allocated by PHP -; it can accept the following format: -; - %{bytes}M (default) -; - %{kilobytes}M -; - %{kilo}M -; - %{megabytes}M -; - %{mega}M -; %n: pool name -; %o: output header -; it must be associated with embraces to specify the name of the header: -; - %{Content-Type}o -; - %{X-Powered-By}o -; - %{Transfert-Encoding}o -; - .... -; %p: PID of the child that serviced the request -; %P: PID of the parent of the child that serviced the request -; %q: the query string -; %Q: the '?' character if query string exists -; %r: the request URI (without the query string, see %q and %Q) -; %R: remote IP address -; %s: status (response code) -; %t: server time the request was received -; it can accept a strftime(3) format: -; %d/%b/%Y:%H:%M:%S %z (default) -; The strftime(3) format must be encapsuled in a %{}t tag -; e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t -; %T: time the log has been written (the request has finished) -; it can accept a strftime(3) format: -; %d/%b/%Y:%H:%M:%S %z (default) -; The strftime(3) format must be encapsuled in a %{}t tag -; e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t -; %u: remote user -; -; Default: "%R - %u %t \"%m %r\" %s" -;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%" - -; The log file for slow requests -; Default Value: not set -; Note: slowlog is mandatory if request_slowlog_timeout is set -;slowlog = log/$pool.log.slow - -; The timeout for serving a single request after which a PHP backtrace will be -; dumped to the 'slowlog' file. A value of '0s' means 'off'. -; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) -; Default Value: 0 -;request_slowlog_timeout = 0 - -; The timeout for serving a single request after which the worker process will -; be killed. This option should be used when the 'max_execution_time' ini option -; does not stop script execution for some reason. A value of '0' means 'off'. -; Available units: s(econds)(default), m(inutes), h(ours), or d(ays) -; Default Value: 0 -request_terminate_timeout = 1d - -; Set open file descriptor rlimit. -; Default Value: system defined value -;rlimit_files = 1024 - -; Set max core size rlimit. -; Possible Values: 'unlimited' or an integer greater or equal to 0 -; Default Value: system defined value -;rlimit_core = 0 - -; Chroot to this directory at the start. This value must be defined as an -; absolute path. When this value is not set, chroot is not used. -; Note: you can prefix with '$prefix' to chroot to the pool prefix or one -; of its subdirectories. If the pool prefix is not set, the global prefix -; will be used instead. -; Note: chrooting is a great security feature and should be used whenever -; possible. However, all PHP paths will be relative to the chroot -; (error_log, sessions.save_path, ...). -; Default Value: not set -;chroot = - -; Chdir to this directory at the start. -; Note: relative path can be used. -; Default Value: current directory or / when chroot -chdir = __INSTALL_DIR__ - -; Redirect worker stdout and stderr into main error log. If not set, stdout and -; stderr will be redirected to /dev/null according to FastCGI specs. -; Note: on highloaded environement, this can cause some delay in the page -; process time (several ms). -; Default Value: no -;catch_workers_output = yes - -; Clear environment in FPM workers -; Prevents arbitrary environment variables from reaching FPM worker processes -; by clearing the environment in workers before env vars specified in this -; pool configuration are added. -; Setting to "no" will make all environment variables available to PHP code -; via getenv(), $_ENV and $_SERVER. -; Default Value: yes -;clear_env = no - -; Limits the extensions of the main script FPM will allow to parse. This can -; prevent configuration mistakes on the web server side. You should only limit -; FPM to .php extensions to prevent malicious users to use other extensions to -; execute php code. -; Note: set an empty value to allow all extensions. -; Default Value: .php -;security.limit_extensions = .php .php3 .php4 .php5 .php7 - -; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from -; the current environment. -; Default Value: clean env -;env[HOSTNAME] = $HOSTNAME -;env[PATH] = /usr/local/bin:/usr/bin:/bin -;env[TMP] = /tmp -;env[TMPDIR] = /tmp -;env[TEMP] = /tmp - -; Additional php.ini defines, specific to this pool of workers. These settings -; overwrite the values previously defined in the php.ini. The directives are the -; same as the PHP SAPI: -; php_value/php_flag - you can set classic ini defines which can -; be overwritten from PHP call 'ini_set'. -; php_admin_value/php_admin_flag - these directives won't be overwritten by -; PHP call 'ini_set' -; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no. - -; Defining 'extension' will load the corresponding shared extension from -; extension_dir. Defining 'disable_functions' or 'disable_classes' will not -; overwrite previously defined php.ini values, but will append the new value -; instead. - -; Note: path INI options can be relative and will be expanded with the prefix -; (pool, global or /usr) - -; Default Value: nothing is defined by default except the values in php.ini and -; specified at startup with the -d argument -;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com -;php_flag[display_errors] = off -;php_admin_value[error_log] = /var/log/fpm-php.www.log -;php_admin_flag[log_errors] = on -;php_admin_value[memory_limit] = 32M - -; Common values to change to increase file upload limit -php_admin_value[upload_max_filesize] = 30M -php_admin_value[post_max_size] = 30M -; php_admin_flag[mail.add_x_header] = Off - -; Other common parameters -; php_admin_value[max_execution_time] = 600 -; php_admin_value[max_input_time] = 300 -; php_admin_value[memory_limit] = 256M -; php_admin_flag[short_open_tag] = On diff --git a/conf/spip2_migration b/conf/spip2_migration deleted file mode 100644 index 273d9a7..0000000 --- a/conf/spip2_migration +++ /dev/null @@ -1,10 +0,0 @@ -#!/bin/bash - -# Final path -/var/www/$app - -# Nginx config -/etc/nginx/conf.d/$domain.d/$app.conf - -# php-fpm config -/etc/php/7.0/fpm/pool.d/$app.conf diff --git a/conf/spip2_post_migration.sh b/conf/spip2_post_migration.sh deleted file mode 100644 index 34584fb..0000000 --- a/conf/spip2_post_migration.sh +++ /dev/null @@ -1,38 +0,0 @@ -#!/bin/bash - -# Ending the migration process from Spip2 to Spip - -set -u - -#================================================= -# IMPORT GENERIC HELPERS -#================================================= - -source /usr/share/yunohost/helpers - -#================================================= -# SET VARIABLES -#================================================= - -old_app="__OLD_APP__" -new_app="__NEW_APP__" -script_name="$0" - -#================================================= -# DELETE OLD APP'S SETTINGS -#================================================= - -ynh_secure_remove "/etc/yunohost/apps/$old_app" -yunohost app ssowatconf - -#================================================= -# REMOVE THE OLD USER -#================================================= - -ynh_system_user_delete $old_app - -#================================================= -# DELETE THIS SCRIPT -#================================================= - -echo "rm $script_name" | at now + 1 minutes \ No newline at end of file diff --git a/doc/DESCRIPTION.md b/doc/DESCRIPTION.md new file mode 100644 index 0000000..87ef42a --- /dev/null +++ b/doc/DESCRIPTION.md @@ -0,0 +1 @@ +CMS with a focus on collaborative edition and multilingualism \ No newline at end of file diff --git a/doc/DISCLAIMER.md b/doc/DISCLAIMER.md deleted file mode 100644 index 885edd8..0000000 --- a/doc/DISCLAIMER.md +++ /dev/null @@ -1,32 +0,0 @@ -## Configuration - -How to configure this app: by an admin panel. - -#### Multi-users support - - * Are LDAP and HTTP auth supported? **Yes** - * Can the app be used by multiple users? **Yes** - -## Migrate from SPIP2 - -**This is not considered as stable yet, please do it with care and only for testing!** - -This package handle the migration from SPIP2 to SPIP. For that, your -SPIP2 application must be **up-to-date** in YunoHost. To ensure that, execute: - -```bash -sudo yunohost app upgrade -u https://github.com/YunoHost-Apps/spip2_ynh spip2 --debug -``` - -You will then have to upgrade your SPIP2 application with this repository. -This can only be done from the command-line interface - e.g. through SSH. Once you're connected, you simply have to execute the following: - -```bash -sudo yunohost app upgrade -u https://github.com/YunoHost-Apps/spip_ynh spip2 --debug -``` - -The `--debug` option will let you see the full output. If you encounter any issue, please paste it. - -Note that a cron job will be executed at some time after the end of this -command. You must wait that before doing any other application operations! -You should see that SPIP is installed after that. diff --git a/doc/DISCLAIMER_fr.md b/doc/DISCLAIMER_fr.md deleted file mode 100644 index d941853..0000000 --- a/doc/DISCLAIMER_fr.md +++ /dev/null @@ -1,29 +0,0 @@ -## Configuration - -Comment configurer cette application: via le panneau d'administration. - -#### Support multi-utilisateurs - - * L'authentification LDAP et HTTP est-elle prise en charge? **Oui** - * L'application peut-elle être utilisée par plusieurs utilisateurs? **Oui** - -## Migration depuis SPIP2 - -**Ceci n'est pas encore considéré comme stable, veuillez le faire avec soin et uniquement pour test!** - -Ce paquet gère la migration de SPIP2 vers SPIP. Pour cela, votre application SPIP2 doit être **à jour** dans YunoHost. Pour s'en assurer : - -```bash -sudo yunohost app upgrade -u https://github.com/YunoHost-Apps/spip2_ynh spip2 --debug -``` - -Vous devrez ensuite mettre à jour votre application SPIP2 avec ce dépôt. -Cela ne peut se faire qu'à partir de l'interface en ligne de commande - par exemple via SSH. Une fois connecté, il vous suffit d'exécuter ce qui suit : - -```bash -sudo yunohost app upgrade -u https://github.com/YunoHost-Apps/spip_ynh spip2 --debug -``` - -L'option `--debug` vous permettra de voir la sortie complète. Si vous rencontrez un problème, veuillez ouvrir une issue. - -Notez qu'une tâche cron sera exécutée après la fin de cette commande. Vous devez attendre cela avant de faire toute autre opération d'application ! Vous devriez voir que SPIP est installé après cela. diff --git a/manifest.json b/manifest.json deleted file mode 100644 index f58ec70..0000000 --- a/manifest.json +++ /dev/null @@ -1,73 +0,0 @@ -{ - "name": "SPIP", - "id": "spip", - "packaging_format": 1, - "description": { - "en": "CMS with a focus on collaborative edition and multilingualism", - "fr": "CMS conçu pour l'édition collaborative et le multilinguisme" - }, - "version": "4.2.2~ynh1", - "url": "http://www.spip.net/", - "upstream": { - "license": "GPL-3.0-or-later", - "website": "http://www.spip.net/", - "demo": "https://demo.spip.net/", - "admindoc": "https://www.spip.net/en_rubrique209.html", - "userdoc": "https://www.spip.net/en_rubrique57.html", - "code": "https://git.spip.net/spip/spip" - }, - "license": "GPL-3.0-or-later", - "maintainer": { - "name": "cyp", - "email": "cyp@rouquin.me" - }, - "requirements": { - "yunohost": ">= 4.3.2" - }, - "multi_instance": true, - "services": [ - "nginx", - "mysql" - ], - "arguments": { - "install": [ - { - "name": "domain", - "type": "domain" - }, - { - "name": "path", - "type": "path", - "example": "/spip", - "default": "/spip" - }, - { - "name": "is_public", - "type": "boolean", - "default": true - }, - { - "name": "admin", - "type": "user" - }, - { - "name": "password", - "type": "password" - }, - { - "name": "users_status", - "type": "string", - "ask": { - "en": "Choose the status of YunoHost users", - "fr": "Choisissez le status des utilisateurs de YunoHost" - }, - "choices": [ - "Administrator", - "Editor", - "Visitor" - ], - "default": "Editor" - } - ] - } -} diff --git a/manifest.toml b/manifest.toml index 8bc317f..4fe1214 100644 --- a/manifest.toml +++ b/manifest.toml @@ -16,26 +16,22 @@ demo = "https://demo.spip.net/" admindoc = "https://www.spip.net/en_rubrique209.html" userdoc = "https://www.spip.net/en_rubrique57.html" code = "https://git.spip.net/spip/spip" -cpe = "???" # FIXME: optional but recommended if relevant, this is meant to contain the Common Platform Enumeration, which is sort of a standard id for applications defined by the NIST. In particular, Yunohost may use this is in the future to easily track CVE (=security reports) related to apps. The CPE may be obtained by searching here: https://nvd.nist.gov/products/cpe/search. For example, for Nextcloud, the CPE is 'cpe:2.3:a:nextcloud:nextcloud' (no need to include the version number) -fund = "???" # FIXME: optional but recommended (or remove if irrelevant / not applicable). This is meant to be an URL where people can financially support this app, especially when its development is based on volunteers and/or financed by its community. YunoHost may later advertise it in the webadmin. [integration] -yunohost = ">= 4.3.2" -architectures = "all" # FIXME: can be replaced by a list of supported archs using the dpkg --print-architecture nomenclature (amd64/i386/armhf/arm64), for example: ["amd64", "i386"] +yunohost = ">= 11.1.19" +architectures = "all" multi_instance = true -ldap = "?" # FIXME: replace with true, false, or "not_relevant". Not to confuse with the "sso" key : the "ldap" key corresponds to wether or not a user *can* login on the app using its YunoHost credentials. -sso = "?" # FIXME: replace with true, false, or "not_relevant". Not to confuse with the "ldap" key : the "sso" key corresponds to wether or not a user is *automatically logged-in* on the app when logged-in on the YunoHost portal. -disk = "50M" # FIXME: replace with an **estimate** minimum disk requirement. e.g. 20M, 400M, 1G, ... -ram.build = "50M" # FIXME: replace with an **estimate** minimum ram requirement. e.g. 50M, 400M, 1G, ... -ram.runtime = "50M" # FIXME: replace with an **estimate** minimum ram requirement. e.g. 50M, 400M, 1G, ... +ldap = false +sso = true +disk = "50M" +ram.build = "50M" +ram.runtime = "50M" [install] [install.domain] - # this is a generic question - ask strings are automatically handled by Yunohost's core type = "domain" [install.path] - # this is a generic question - ask strings are automatically handled by Yunohost's core type = "path" default = "/spip" @@ -44,11 +40,9 @@ ram.runtime = "50M" # FIXME: replace with an **estimate** minimum ram requiremen default = "visitors" [install.admin] - # this is a generic question - ask strings are automatically handled by Yunohost's core type = "user" [install.password] - # this is a generic question - ask strings are automatically handled by Yunohost's core type = "password" [install.users_status] @@ -72,5 +66,9 @@ ram.runtime = "50M" # FIXME: replace with an **estimate** minimum ram requiremen [resources.permissions] main.url = "/" + [resources.apt] + packages = "mariadb-server libsodium23 php8.2-curl php8.2-xml php8.2-gd php8.2-mysqli php8.2-zip" + + [resources.database] type = "mysql" diff --git a/scripts/_common.sh b/scripts/_common.sh index b3239b6..06ba80d 100644 --- a/scripts/_common.sh +++ b/scripts/_common.sh @@ -4,10 +4,6 @@ # COMMON VARIABLES #================================================= -#REMOVEME? YNH_PHP_VERSION="7.4" - -#REMOVEME? pkg_dependencies="libsodium23 php${YNH_PHP_VERSION}-curl php${YNH_PHP_VERSION}-xml php${YNH_PHP_VERSION}-gd php${YNH_PHP_VERSION}-mysqli php${YNH_PHP_VERSION}-zip" - #================================================= # EXPERIMENTAL HELPERS #================================================= diff --git a/scripts/backup b/scripts/backup index fe749c0..214b288 100644 --- a/scripts/backup +++ b/scripts/backup @@ -10,28 +10,6 @@ source ../settings/scripts/_common.sh source /usr/share/yunohost/helpers -#================================================= -# MANAGE SCRIPT FAILURE -#================================================= - -#REMOVEME? ynh_clean_setup () { - true -} -# Exit if an error occurs during the execution of the script -#REMOVEME? ynh_abort_if_errors - -#================================================= -# LOAD SETTINGS -#================================================= -#REMOVEME? ynh_print_info --message="Loading installation settings..." - -#REMOVEME? app=$YNH_APP_INSTANCE_NAME - -#REMOVEME? #REMOVEME? install_dir=$(ynh_app_setting_get --app=$app --key=install_dir) -#REMOVEME? domain=$(ynh_app_setting_get --app=$app --key=domain) -#REMOVEME? db_name=$(ynh_app_setting_get --app=$app --key=db_name) -#REMOVEME? phpversion=$(ynh_app_setting_get --app=$app --key=phpversion) - #================================================= # DECLARE DATA AND CONF FILES TO BACKUP #================================================= diff --git a/scripts/change_url b/scripts/change_url index 8f54bad..6a52cf0 100644 --- a/scripts/change_url +++ b/scripts/change_url @@ -9,59 +9,6 @@ source _common.sh source /usr/share/yunohost/helpers -#================================================= -# RETRIEVE ARGUMENTS -#================================================= - -#REMOVEME? old_domain=$YNH_APP_OLD_DOMAIN -#REMOVEME? old_path=$YNH_APP_OLD_PATH - -#REMOVEME? new_domain=$YNH_APP_NEW_DOMAIN -#REMOVEME? new_path=$YNH_APP_NEW_PATH - -#REMOVEME? app=$YNH_APP_INSTANCE_NAME - -#================================================= -# LOAD SETTINGS -#================================================= -#REMOVEME? ynh_script_progression --message="Loading installation settings..." - -#REMOVEME? # Needed for helper "ynh_add_nginx_config" -#REMOVEME? #REMOVEME? install_dir=$(ynh_app_setting_get --app=$app --key=install_dir) - -#================================================= -# BACKUP BEFORE CHANGE URL THEN ACTIVE TRAP -#================================================= -#REMOVEME? ynh_script_progression --message="Backing up the app before changing its URL (may take a while)..." - -# Backup the current version of the app -#REMOVEME? ynh_backup_before_upgrade -#REMOVEME? ynh_clean_setup () { - # Remove the new domain config file, the remove script won't do it as it doesn't know yet its location. -#REMOVEME? ynh_secure_remove --file="/etc/nginx/conf.d/$new_domain.d/$app.conf" - - # Restore it if the upgrade fails -#REMOVEME? ynh_restore_upgradebackup -} -# Exit if an error occurs during the execution of the script -#REMOVEME? ynh_abort_if_errors - -#================================================= -# CHECK WHICH PARTS SHOULD BE CHANGED -#================================================= - -#REMOVEME? change_domain=0 -#REMOVEME? if [ "$old_domain" != "$new_domain" ] -then - #REMOVEME? change_domain=1 -fi - -#REMOVEME? change_path=0 -#REMOVEME? if [ "$old_path" != "$new_path" ] -then - #REMOVEME? change_path=1 -fi - #================================================= # STANDARD MODIFICATIONS #================================================= @@ -71,39 +18,6 @@ ynh_script_progression --message="Updating NGINX web server configuration..." ynh_change_url_nginx_config -#REMOVEME? nginx_conf_path=/etc/nginx/conf.d/$old_domain.d/$app.conf - -# Change the path in the NGINX config file -if [ $change_path -eq 1 ] -then - # Make a backup of the original NGINX config file if modified -#REMOVEME? ynh_backup_if_checksum_is_different --file="$nginx_conf_path" - # Set global variables for NGINX helper -#REMOVEME? domain="$old_domain" -#REMOVEME? path="$new_path" - # Create a dedicated NGINX config -#REMOVEME? ynh_add_nginx_config -fi - -# Change the domain for NGINX -if [ $change_domain -eq 1 ] -then - # Delete file checksum for the old conf file location -#REMOVEME? ynh_delete_file_checksum --file="$nginx_conf_path" -#REMOVEME? mv $nginx_conf_path /etc/nginx/conf.d/$new_domain.d/$app.conf - # Store file checksum for the new config file location -#REMOVEME? ynh_store_file_checksum --file="/etc/nginx/conf.d/$new_domain.d/$app.conf" -fi - -#================================================= -# GENERIC FINALISATION -#================================================= -# RELOAD NGINX -#================================================= -#REMOVEME? ynh_script_progression --message="Reloading NGINX web server..." - -#REMOVEME? #REMOVEME? ynh_systemd_action --service_name=nginx --action=reload - #================================================= # END OF SCRIPT #================================================= diff --git a/scripts/install b/scripts/install index ace7b4b..cb4fd35 100644 --- a/scripts/install +++ b/scripts/install @@ -9,89 +9,14 @@ source _common.sh source /usr/share/yunohost/helpers -#================================================= -# MANAGE SCRIPT FAILURE -#================================================= - -#REMOVEME? ynh_clean_setup () { - true -} -# Exit if an error occurs during the execution of the script -#REMOVEME? ynh_abort_if_errors - -#================================================= -# RETRIEVE ARGUMENTS FROM THE MANIFEST -#================================================= - -#REMOVEME? domain=$YNH_APP_ARG_DOMAIN -#REMOVEME? path=$YNH_APP_ARG_PATH -#REMOVEME? is_public=$YNH_APP_ARG_IS_PUBLIC -#REMOVEME? admin=$YNH_APP_ARG_ADMIN -#REMOVEME? password=$YNH_APP_ARG_PASSWORD -#REMOVEME? users_status=$YNH_APP_ARG_USERS_STATUS - -#REMOVEME? app=$YNH_APP_INSTANCE_NAME - -#================================================= -# CHECK IF THE APP CAN BE INSTALLED WITH THESE ARGS -#================================================= -#REMOVEME? ynh_script_progression --message="Validating installation parameters..." - -#REMOVEME? install_dir=/var/www/$app -#REMOVEME? test ! -e "$install_dir" || ynh_die --message="This path already contains a folder" - -# Register (book) web path -#REMOVEME? ynh_webpath_register --app=$app --domain=$domain --path=$path - -#================================================= -# STORE SETTINGS FROM MANIFEST -#================================================= -#REMOVEME? ynh_script_progression --message="Storing installation settings..." - -#REMOVEME? ynh_app_setting_set --app=$app --key=domain --value=$domain -#REMOVEME? ynh_app_setting_set --app=$app --key=path --value=$path -#REMOVEME? ynh_app_setting_set --app=$app --key=admin --value=$admin -#REMOVEME? ynh_app_setting_set --app=$app --key=password --value=$password -ynh_app_setting_set --app=$app --key=users_status --value=$users_status - -#================================================= -# STANDARD MODIFICATIONS -#================================================= -# INSTALL DEPENDENCIES -#================================================= -#REMOVEME? ynh_script_progression --message="Installing dependencies..." - -#REMOVEME? ynh_install_app_dependencies $pkg_dependencies - -#================================================= -# CREATE DEDICATED USER -#================================================= -#REMOVEME? ynh_script_progression --message="Configuring system user..." - -# Create a system user -#REMOVEME? ynh_system_user_create --username=$app --home_dir="$install_dir" - -#================================================= -# CREATE A MYSQL DATABASE -#================================================= -#REMOVEME? ynh_script_progression --message="Creating a MySQL database..." - -#REMOVEME? db_name=$(ynh_sanitize_dbid --db_name=$app) -#REMOVEME? db_user=$db_name -#REMOVEME? ynh_app_setting_set --app=$app --key=db_name --value=$db_name -#REMOVEME? ynh_mysql_setup_db --db_user=$db_user --db_name=$db_name -#REMOVEME? db_pwd=$(ynh_app_setting_get --app=$app --key=mysqlpwd) - #================================================= # DOWNLOAD, CHECK AND UNPACK SOURCE #================================================= ynh_script_progression --message="Setting up source files..." -#REMOVEME? ynh_app_setting_set --app=$app --key=install_dir --value=$install_dir # Download, check integrity, uncompress and patch the source from app.src ynh_setup_source --dest_dir="$install_dir" -chmod 750 "$install_dir" chmod -R o-rwx "$install_dir" chown -R $app:www-data "$install_dir" @@ -101,12 +26,7 @@ chown -R $app:www-data "$install_dir" ynh_script_progression --message="Configuring PHP-FPM..." # Create a dedicated PHP-FPM config -ynh_add_fpm_config - -#================================================= -# NGINX CONFIGURATION -#================================================= -ynh_script_progression --message="Configuring NGINX web server..." +ynh_add_fpm_config --usage=low --footprint=low # Create a dedicated NGINX config ynh_add_nginx_config @@ -171,28 +91,6 @@ cp ../conf/ecran_securite.php $install_dir/config/ecran_securite.php ynh_store_file_checksum --file="$install_dir/config/connect.php" -#================================================= -# GENERIC FINALIZATION -#================================================= -# SETUP SSOWAT -#================================================= -#REMOVEME? ynh_script_progression --message="Configuring permissions..." - -# Make app public if necessary -#REMOVEME? if [ $is_public -eq 1 ] -then - # Everyone can access the app. - # The "main" permission is automatically created before the install script. -#REMOVEME? ynh_permission_update --permission="main" --add="visitors" -fi - -#================================================= -# RELOAD NGINX -#================================================= -#REMOVEME? ynh_script_progression --message="Reloading NGINX web server..." - -#REMOVEME? ynh_systemd_action --service_name=nginx --action=reload - #================================================= # END OF SCRIPT #================================================= diff --git a/scripts/upgrade b/scripts/upgrade index d461faa..ef554fb 100644 --- a/scripts/upgrade +++ b/scripts/upgrade @@ -9,49 +9,12 @@ source _common.sh source /usr/share/yunohost/helpers -#================================================= -# LOAD SETTINGS -#================================================= -#REMOVEME? ynh_script_progression --message="Loading installation settings..." - -#REMOVEME? app=$YNH_APP_INSTANCE_NAME - -#REMOVEME? domain=$(ynh_app_setting_get --app=$app --key=domain) -#REMOVEME? path=$(ynh_app_setting_get --app=$app --key=path) -#REMOVEME? admin=$(ynh_app_setting_get --app=$app --key=admin) -#REMOVEME? password=$(ynh_app_setting_get --app=$app --key=password) -#REMOVEME? #REMOVEME? install_dir=$(ynh_app_setting_get --app=$app --key=install_dir) -#REMOVEME? users_status=$(ynh_app_setting_get --app=$app --key=users_status) -#REMOVEME? db_name=$(ynh_app_setting_get --app=$app --key=db_name) -#REMOVEME? db_user=$db_name -#REMOVEME? db_pwd=$(ynh_app_setting_get --app=$app --key=mysqlpwd) - #================================================= # CHECK VERSION #================================================= -ynh_script_progression --message="Checking version..." upgrade_type=$(ynh_check_app_version_changed) -#================================================= -# BACKUP BEFORE UPGRADE THEN ACTIVE TRAP -#================================================= -#REMOVEME? ynh_script_progression --message="Backing up the app before upgrading (may take a while)..." - -# Backup the current version of the app -#REMOVEME? ynh_backup_before_upgrade -#REMOVEME? ynh_clean_setup () { - if [ $migration_process -eq 1 ]; then - yunohost app remove $app - # Reload some values changed by the migration process -#REMOVEME? app=$YNH_APP_INSTANCE_NAME - fi - # Restore it if the upgrade fails -#REMOVEME? ynh_restore_upgradebackup -} -# Exit if an error occurs during the execution of the script -#REMOVEME? ynh_abort_if_errors - #================================================= # STANDARD UPGRADE STEPS #================================================= @@ -59,67 +22,12 @@ upgrade_type=$(ynh_check_app_version_changed) #================================================= ynh_script_progression --message="Ensuring downward compatibility..." -# Remove is_public -#REMOVEME? if [ -n "$(ynh_app_setting_get --app=$app --key=is_public)" ]; then - ynh_app_setting_delete --app=$app --key=is_public -fi - -# If db_name doesn't exist, create it -if [ -z $db_name ]; then - db_name=$app -#REMOVEME? ynh_app_setting_set --app=$app --key=db_name --value=$db_name -fi - -# If install_dir doesn't exist, create it -if [ -z $install_dir ]; then -#REMOVEME? install_dir=/var/www/$app -#REMOVEME? ynh_app_setting_set --app=$app --key=install_dir --value=$install_dir -fi - # If users_status doesn't exist, create it -if [ -z $users_status ]; then +if [ -z "${users_status:-}" ]; then users_status="Editor" ynh_app_setting_set --app=$app --key=users_status --value=$users_status fi -if [ -z $password ]; then - # Generate random password - password=$(ynh_string_random --length=8) - - echo "The new version of SPIP provide a new password. You can change it in the private area." > mail_to_send - echo "" >> mail_to_send - echo "This password is: $password" >> mail_to_send - - ynh_send_readme_to_admin --app_message="mail_to_send" --type="upgrade" - -#REMOVEME? ynh_app_setting_set --app=$app --key=password --value=$password -fi - -# Cleaning legacy permissions -#REMOVEME? if ynh_legacy_permissions_exists; then -#REMOVEME? ynh_legacy_permissions_delete_all -fi - -#================================================= -# HANDLE MIGRATION FROM SPIP2 -#================================================= - -ynh_handle_app_migration "spip2" "spip2_migration" -if [ $migration_process -eq 1 ]; then - # If a migration has been perform - # Reload some values changed by the migration process -#REMOVEME? #REMOVEME? install_dir=$(ynh_app_setting_get --app=$app --key=install_dir) -#REMOVEME? db_name=$(ynh_app_setting_get --app=$app --key=db_name) -fi - -#================================================= -# CREATE DEDICATED USER -#================================================= -#REMOVEME? ynh_script_progression --message="Making sure dedicated system user exists..." - -# Create a dedicated user (if not existing) -#REMOVEME? ynh_system_user_create --username=$app --home_dir="$install_dir" - #================================================= # DOWNLOAD, CHECK AND UNPACK SOURCE #================================================= @@ -132,17 +40,9 @@ then ynh_setup_source --dest_dir="$install_dir" fi -chmod 750 "$install_dir" chmod -R o-rwx "$install_dir" chown -R $app:www-data "$install_dir" -#================================================= -# UPGRADE DEPENDENCIES -#================================================= -#REMOVEME? ynh_script_progression --message="Upgrading dependencies..." - -#REMOVEME? ynh_install_app_dependencies $pkg_dependencies - #================================================= # PHP-FPM CONFIGURATION #================================================= @@ -214,6 +114,9 @@ ynh_script_progression --message="Updating a configuration file..." #ynh_replace_string --match_string="'','utf8');" --replace_string="'ldap.php','utf8');" --target_file=$install_dir/config/connect.php cp ../conf/mes_options.php $install_dir/config/mes_options.php +# Add security fix https://www.spip.net/en_article4201.html +cp ../conf/ecran_securite.php $install_dir/config/ecran_securite.php + if [ ! -f $install_dir/config/connect.php ]; then mv $install_dir/config/connect.php.ynh_bkp $install_dir/config/connect.php else @@ -222,15 +125,6 @@ fi ynh_store_file_checksum --file="$install_dir/config/connect.php" -#================================================= -# GENERIC FINALIZATION -#================================================= -# RELOAD NGINX -#================================================= -#REMOVEME? ynh_script_progression --message="Reloading NGINX web server..." - -#REMOVEME? ynh_systemd_action --service_name=nginx --action=reload - #================================================= # SEND INFORMATION #=================================================