Merge pull request #51 from YunoHost-Apps/example_ynh

Apply example_ynh

README.md

@@ -38,9 +38,9 @@ The app can be used by multiple users?
 
 #### Supported architectures
 
-* x86-64b - [![Build Status](https://ci-apps.yunohost.org/ci/logs/wikijs%20%28Community%29.svg)](https://ci-apps.yunohost.org/ci/apps/wikijs/)
+* x86-64b - [![Build Status](https://ci-apps.yunohost.org/ci/logs/wikijs%20%28Apps%29.svg)](https://ci-apps.yunohost.org/ci/apps/wikijs/)
-* ARMv8-A - [![Build Status](https://ci-apps-arm.yunohost.org/ci/logs/wikijs%20%28Community%29.svg)](https://ci-apps-arm.yunohost.org/ci/apps/wikijs/)
+* ARMv8-A - [![Build Status](https://ci-apps-arm.yunohost.org/ci/logs/wikijs%20%28Apps%29.svg)](https://ci-apps-arm.yunohost.org/ci/apps/wikijs/)
-* Jessie x86-64b - [![Build Status](https://ci-stretch.nohost.me/ci/logs/wikijs%20%28Community%29.svg)](https://ci-stretch.nohost.me/ci/apps/wikijs/)
+* Jessie x86-64b - [![Build Status](https://ci-stretch.nohost.me/ci/logs/wikijs%20%28Apps%29.svg)](https://ci-stretch.nohost.me/ci/apps/wikijs/)
 
 ## Limitations
 

conf/php-fpm.conf

@@ -1,430 +0,0 @@
-; Start a new pool named 'www'.
-; the variable $pool can be used in any directive and will be replaced by the
-; pool name ('www' here)
-[__NAMETOCHANGE__]
-
-; Per pool prefix
-; It only applies on the following directives:
-; - 'access.log'
-; - 'slowlog'
-; - 'listen' (unixsocket)
-; - 'chroot'
-; - 'chdir'
-; - 'php_values'
-; - 'php_admin_values'
-; When not set, the global prefix (or /usr) applies instead.
-; Note: This directive can also be relative to the global prefix.
-; Default Value: none
-;prefix = /path/to/pools/$pool
-
-; Unix user/group of processes
-; Note: The user is mandatory. If the group is not set, the default user's group
-;       will be used.
-user = __USER__
-group = __USER__
-
-; The address on which to accept FastCGI requests.
-; Valid syntaxes are:
-;   'ip.add.re.ss:port'    - to listen on a TCP socket to a specific IPv4 address on
-;                            a specific port;
-;   '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on
-;                            a specific port;
-;   'port'                 - to listen on a TCP socket to all addresses
-;                            (IPv6 and IPv4-mapped) on a specific port;
-;   '/path/to/unix/socket' - to listen on a unix socket.
-; Note: This value is mandatory.
-listen = /var/run/php/php7.0-fpm-__NAMETOCHANGE__.sock
-
-; Set listen(2) backlog.
-; Default Value: 511 (-1 on FreeBSD and OpenBSD)
-;listen.backlog = 511
-
-; Set permissions for unix socket, if one is used. In Linux, read/write
-; permissions must be set in order to allow connections from a web server. Many
-; BSD-derived systems allow connections regardless of permissions.
-; Default Values: user and group are set as the running user
-;                 mode is set to 0660
-listen.owner = www-data
-listen.group = www-data
-;listen.mode = 0660
-; When POSIX Access Control Lists are supported you can set them using
-; these options, value is a comma separated list of user/group names.
-; When set, listen.owner and listen.group are ignored
-;listen.acl_users =
-;listen.acl_groups =
-
-; List of addresses (IPv4/IPv6) of FastCGI clients which are allowed to connect.
-; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
-; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
-; must be separated by a comma. If this value is left blank, connections will be
-; accepted from any ip address.
-; Default Value: any
-;listen.allowed_clients = 127.0.0.1
-
-; Specify the nice(2) priority to apply to the pool processes (only if set)
-; The value can vary from -19 (highest priority) to 20 (lower priority)
-; Note: - It will only work if the FPM master process is launched as root
-;       - The pool processes will inherit the master process priority
-;         unless it specified otherwise
-; Default Value: no set
-; process.priority = -19
-
-; Set the process dumpable flag (PR_SET_DUMPABLE prctl) even if the process user
-; or group is differrent than the master process user. It allows to create process
-; core dump and ptrace the process for the pool user.
-; Default Value: no
-; process.dumpable = yes
-
-; Choose how the process manager will control the number of child processes.
-; Possible Values:
-;   static  - a fixed number (pm.max_children) of child processes;
-;   dynamic - the number of child processes are set dynamically based on the
-;             following directives. With this process management, there will be
-;             always at least 1 children.
-;             pm.max_children      - the maximum number of children that can
-;                                    be alive at the same time.
-;             pm.start_servers     - the number of children created on startup.
-;             pm.min_spare_servers - the minimum number of children in 'idle'
-;                                    state (waiting to process). If the number
-;                                    of 'idle' processes is less than this
-;                                    number then some children will be created.
-;             pm.max_spare_servers - the maximum number of children in 'idle'
-;                                    state (waiting to process). If the number
-;                                    of 'idle' processes is greater than this
-;                                    number then some children will be killed.
-;  ondemand - no children are created at startup. Children will be forked when
-;             new requests will connect. The following parameter are used:
-;             pm.max_children           - the maximum number of children that
-;                                         can be alive at the same time.
-;             pm.process_idle_timeout   - The number of seconds after which
-;                                         an idle process will be killed.
-; Note: This value is mandatory.
-pm = dynamic
-
-; The number of child processes to be created when pm is set to 'static' and the
-; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.
-; This value sets the limit on the number of simultaneous requests that will be
-; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
-; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
-; CGI. The below defaults are based on a server without much resources. Don't
-; forget to tweak pm.* to fit your needs.
-; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
-; Note: This value is mandatory.
-pm.max_children = 5
-
-; The number of child processes created on startup.
-; Note: Used only when pm is set to 'dynamic'
-; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
-pm.start_servers = 2
-
-; The desired minimum number of idle server processes.
-; Note: Used only when pm is set to 'dynamic'
-; Note: Mandatory when pm is set to 'dynamic'
-pm.min_spare_servers = 1
-
-; The desired maximum number of idle server processes.
-; Note: Used only when pm is set to 'dynamic'
-; Note: Mandatory when pm is set to 'dynamic'
-pm.max_spare_servers = 3
-
-; The number of seconds after which an idle process will be killed.
-; Note: Used only when pm is set to 'ondemand'
-; Default Value: 10s
-;pm.process_idle_timeout = 10s;
-
-; The number of requests each child process should execute before respawning.
-; This can be useful to work around memory leaks in 3rd party libraries. For
-; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
-; Default Value: 0
-;pm.max_requests = 500
-
-; The URI to view the FPM status page. If this value is not set, no URI will be
-; recognized as a status page. It shows the following informations:
-;   pool                 - the name of the pool;
-;   process manager      - static, dynamic or ondemand;
-;   start time           - the date and time FPM has started;
-;   start since          - number of seconds since FPM has started;
-;   accepted conn        - the number of request accepted by the pool;
-;   listen queue         - the number of request in the queue of pending
-;                          connections (see backlog in listen(2));
-;   max listen queue     - the maximum number of requests in the queue
-;                          of pending connections since FPM has started;
-;   listen queue len     - the size of the socket queue of pending connections;
-;   idle processes       - the number of idle processes;
-;   active processes     - the number of active processes;
-;   total processes      - the number of idle + active processes;
-;   max active processes - the maximum number of active processes since FPM
-;                          has started;
-;   max children reached - number of times, the process limit has been reached,
-;                          when pm tries to start more children (works only for
-;                          pm 'dynamic' and 'ondemand');
-; Value are updated in real time.
-; Example output:
-;   pool:                 www
-;   process manager:      static
-;   start time:           01/Jul/2011:17:53:49 +0200
-;   start since:          62636
-;   accepted conn:        190460
-;   listen queue:         0
-;   max listen queue:     1
-;   listen queue len:     42
-;   idle processes:       4
-;   active processes:     11
-;   total processes:      15
-;   max active processes: 12
-;   max children reached: 0
-;
-; By default the status page output is formatted as text/plain. Passing either
-; 'html', 'xml' or 'json' in the query string will return the corresponding
-; output syntax. Example:
-;   http://www.foo.bar/status
-;   http://www.foo.bar/status?json
-;   http://www.foo.bar/status?html
-;   http://www.foo.bar/status?xml
-;
-; By default the status page only outputs short status. Passing 'full' in the
-; query string will also return status for each pool process.
-; Example:
-;   http://www.foo.bar/status?full
-;   http://www.foo.bar/status?json&full
-;   http://www.foo.bar/status?html&full
-;   http://www.foo.bar/status?xml&full
-; The Full status returns for each process:
-;   pid                  - the PID of the process;
-;   state                - the state of the process (Idle, Running, ...);
-;   start time           - the date and time the process has started;
-;   start since          - the number of seconds since the process has started;
-;   requests             - the number of requests the process has served;
-;   request duration     - the duration in µs of the requests;
-;   request method       - the request method (GET, POST, ...);
-;   request URI          - the request URI with the query string;
-;   content length       - the content length of the request (only with POST);
-;   user                 - the user (PHP_AUTH_USER) (or '-' if not set);
-;   script               - the main script called (or '-' if not set);
-;   last request cpu     - the %cpu the last request consumed
-;                          it's always 0 if the process is not in Idle state
-;                          because CPU calculation is done when the request
-;                          processing has terminated;
-;   last request memory  - the max amount of memory the last request consumed
-;                          it's always 0 if the process is not in Idle state
-;                          because memory calculation is done when the request
-;                          processing has terminated;
-; If the process is in Idle state, then informations are related to the
-; last request the process has served. Otherwise informations are related to
-; the current request being served.
-; Example output:
-;   ************************
-;   pid:                  31330
-;   state:                Running
-;   start time:           01/Jul/2011:17:53:49 +0200
-;   start since:          63087
-;   requests:             12808
-;   request duration:     1250261
-;   request method:       GET
-;   request URI:          /test_mem.php?N=10000
-;   content length:       0
-;   user:                 -
-;   script:               /home/fat/web/docs/php/test_mem.php
-;   last request cpu:     0.00
-;   last request memory:  0
-;
-; Note: There is a real-time FPM status monitoring sample web page available
-;       It's available in: /usr/share/php/7.0/fpm/status.html
-;
-; Note: The value must start with a leading slash (/). The value can be
-;       anything, but it may not be a good idea to use the .php extension or it
-;       may conflict with a real PHP file.
-; Default Value: not set
-;pm.status_path = /status
-
-; The ping URI to call the monitoring page of FPM. If this value is not set, no
-; URI will be recognized as a ping page. This could be used to test from outside
-; that FPM is alive and responding, or to
-; - create a graph of FPM availability (rrd or such);
-; - remove a server from a group if it is not responding (load balancing);
-; - trigger alerts for the operating team (24/7).
-; Note: The value must start with a leading slash (/). The value can be
-;       anything, but it may not be a good idea to use the .php extension or it
-;       may conflict with a real PHP file.
-; Default Value: not set
-;ping.path = /ping
-
-; This directive may be used to customize the response of a ping request. The
-; response is formatted as text/plain with a 200 response code.
-; Default Value: pong
-;ping.response = pong
-
-; The access log file
-; Default: not set
-;access.log = log/$pool.access.log
-
-; The access log format.
-; The following syntax is allowed
-;  %%: the '%' character
-;  %C: %CPU used by the request
-;      it can accept the following format:
-;      - %{user}C for user CPU only
-;      - %{system}C for system CPU only
-;      - %{total}C  for user + system CPU (default)
-;  %d: time taken to serve the request
-;      it can accept the following format:
-;      - %{seconds}d (default)
-;      - %{miliseconds}d
-;      - %{mili}d
-;      - %{microseconds}d
-;      - %{micro}d
-;  %e: an environment variable (same as $_ENV or $_SERVER)
-;      it must be associated with embraces to specify the name of the env
-;      variable. Some exemples:
-;      - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e
-;      - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e
-;  %f: script filename
-;  %l: content-length of the request (for POST request only)
-;  %m: request method
-;  %M: peak of memory allocated by PHP
-;      it can accept the following format:
-;      - %{bytes}M (default)
-;      - %{kilobytes}M
-;      - %{kilo}M
-;      - %{megabytes}M
-;      - %{mega}M
-;  %n: pool name
-;  %o: output header
-;      it must be associated with embraces to specify the name of the header:
-;      - %{Content-Type}o
-;      - %{X-Powered-By}o
-;      - %{Transfert-Encoding}o
-;      - ....
-;  %p: PID of the child that serviced the request
-;  %P: PID of the parent of the child that serviced the request
-;  %q: the query string
-;  %Q: the '?' character if query string exists
-;  %r: the request URI (without the query string, see %q and %Q)
-;  %R: remote IP address
-;  %s: status (response code)
-;  %t: server time the request was received
-;      it can accept a strftime(3) format:
-;      %d/%b/%Y:%H:%M:%S %z (default)
-;      The strftime(3) format must be encapsuled in a %{<strftime_format>}t tag
-;      e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t
-;  %T: time the log has been written (the request has finished)
-;      it can accept a strftime(3) format:
-;      %d/%b/%Y:%H:%M:%S %z (default)
-;      The strftime(3) format must be encapsuled in a %{<strftime_format>}t tag
-;      e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t
-;  %u: remote user
-;
-; Default: "%R - %u %t \"%m %r\" %s"
-;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%"
-
-; The log file for slow requests
-; Default Value: not set
-; Note: slowlog is mandatory if request_slowlog_timeout is set
-;slowlog = log/$pool.log.slow
-
-; The timeout for serving a single request after which a PHP backtrace will be
-; dumped to the 'slowlog' file. A value of '0s' means 'off'.
-; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
-; Default Value: 0
-;request_slowlog_timeout = 0
-
-; The timeout for serving a single request after which the worker process will
-; be killed. This option should be used when the 'max_execution_time' ini option
-; does not stop script execution for some reason. A value of '0' means 'off'.
-; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
-; Default Value: 0
-request_terminate_timeout = 1d
-
-; Set open file descriptor rlimit.
-; Default Value: system defined value
-;rlimit_files = 1024
-
-; Set max core size rlimit.
-; Possible Values: 'unlimited' or an integer greater or equal to 0
-; Default Value: system defined value
-;rlimit_core = 0
-
-; Chroot to this directory at the start. This value must be defined as an
-; absolute path. When this value is not set, chroot is not used.
-; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
-; of its subdirectories. If the pool prefix is not set, the global prefix
-; will be used instead.
-; Note: chrooting is a great security feature and should be used whenever
-;       possible. However, all PHP paths will be relative to the chroot
-;       (error_log, sessions.save_path, ...).
-; Default Value: not set
-;chroot =
-
-; Chdir to this directory at the start.
-; Note: relative path can be used.
-; Default Value: current directory or / when chroot
-chdir = __FINALPATH__
-
-; Redirect worker stdout and stderr into main error log. If not set, stdout and
-; stderr will be redirected to /dev/null according to FastCGI specs.
-; Note: on highloaded environement, this can cause some delay in the page
-; process time (several ms).
-; Default Value: no
-;catch_workers_output = yes
-
-; Clear environment in FPM workers
-; Prevents arbitrary environment variables from reaching FPM worker processes
-; by clearing the environment in workers before env vars specified in this
-; pool configuration are added.
-; Setting to "no" will make all environment variables available to PHP code
-; via getenv(), $_ENV and $_SERVER.
-; Default Value: yes
-;clear_env = no
-
-; Limits the extensions of the main script FPM will allow to parse. This can
-; prevent configuration mistakes on the web server side. You should only limit
-; FPM to .php extensions to prevent malicious users to use other extensions to
-; execute php code.
-; Note: set an empty value to allow all extensions.
-; Default Value: .php
-;security.limit_extensions = .php .php3 .php4 .php5 .php7
-
-; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
-; the current environment.
-; Default Value: clean env
-;env[HOSTNAME] = $HOSTNAME
-;env[PATH] = /usr/local/bin:/usr/bin:/bin
-;env[TMP] = /tmp
-;env[TMPDIR] = /tmp
-;env[TEMP] = /tmp
-
-; Additional php.ini defines, specific to this pool of workers. These settings
-; overwrite the values previously defined in the php.ini. The directives are the
-; same as the PHP SAPI:
-;   php_value/php_flag             - you can set classic ini defines which can
-;                                    be overwritten from PHP call 'ini_set'.
-;   php_admin_value/php_admin_flag - these directives won't be overwritten by
-;                                     PHP call 'ini_set'
-; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
-
-; Defining 'extension' will load the corresponding shared extension from
-; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
-; overwrite previously defined php.ini values, but will append the new value
-; instead.
-
-; Note: path INI options can be relative and will be expanded with the prefix
-; (pool, global or /usr)
-
-; Default Value: nothing is defined by default except the values in php.ini and
-;                specified at startup with the -d argument
-;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com
-;php_flag[display_errors] = off
-;php_admin_value[error_log] = /var/log/fpm-php.www.log
-;php_admin_flag[log_errors] = on
-;php_admin_value[memory_limit] = 32M
-
-; Common values to change to increase file upload limit
-; php_admin_value[upload_max_filesize] = 50M
-; php_admin_value[post_max_size] = 50M
-; php_admin_flag[mail.add_x_header] = Off
-
-; Other common parameters
-; php_admin_value[max_execution_time] = 600
-; php_admin_value[max_input_time] = 300
-; php_admin_value[memory_limit] = 256M
-; php_admin_flag[short_open_tag] = On

manifest.json

@@ -13,7 +13,7 @@
         "name": "yalh76"
     },
     "requirements": {
-        "yunohost": ">= 3.4"
+        "yunohost": ">= 3.5"
     },
     "multi_instance": true,
     "services": [
@@ -25,8 +25,8 @@
                 "name": "domain",
                 "type": "domain",
                 "ask": {
-                    "en": "Choose a domain name for wikijs",
+                    "en": "Choose a domain name for Wiki.js",
-                    "fr": "Choisissez un nom de domaine pour wikijs"
+                    "fr": "Choisissez un nom de domaine pour Wiki.js"
                 },
                 "example": "example.com"
             },

scripts/backup

@@ -8,7 +8,6 @@
 
 #Keep this path for calling _common.sh inside the execution's context of backup and restore scripts
 source ../settings/scripts/_common.sh
-source ../settings/scripts/ynh_systemd_action
 source /usr/share/yunohost/helpers
 
 #=================================================
@@ -24,48 +23,55 @@ ynh_abort_if_errors
 #=================================================
 # LOAD SETTINGS
 #=================================================
-ynh_print_info "Loading installation settings..."
+ynh_print_info --message="Loading installation settings..."
 
 app=$YNH_APP_INSTANCE_NAME
 
-final_path=$(ynh_app_setting_get $app final_path)
+final_path=$(ynh_app_setting_get --app=$app --key=final_path)
-domain=$(ynh_app_setting_get $app domain)
+domain=$(ynh_app_setting_get --app=$app --key=domain)
-db_name=$(ynh_app_setting_get $app db_name)
+db_name=$(ynh_app_setting_get --app=$app --key=db_name)
 
 #=================================================
 # STANDARD BACKUP STEPS
+#=================================================
+# STOP SYSTEMD SERVICE
+#=================================================
+ynh_print_info --message="Stopping a systemd service..."
+
+ynh_systemd_action --service_name=$app --action="stop"
+
 #=================================================
 # BACKUP THE APP MAIN DIR
 #=================================================
-ynh_print_info "Backing up the main app directory..."
+ynh_print_info --message="Backing up the main app directory..."
 
-ynh_backup "$final_path"
+ynh_backup --src_path="$final_path"
 
 #=================================================
 # BACKUP THE NGINX CONFIGURATION
 #=================================================
-ynh_print_info "Backing up nginx web server configuration..."
+ynh_print_info --message="Backing up nginx web server configuration..."
 
-ynh_backup "/etc/nginx/conf.d/$domain.d/$app.conf"
+ynh_backup --src_path="/etc/nginx/conf.d/$domain.d/$app.conf"
 
 #=================================================
 # BACKUP THE POSTGRESQL DATABASE
 #=================================================
-ynh_print_info "Backing up the PostgreSQL database..."
+ynh_print_info --message="Backing up the PostgreSQL database..."
 
-ynh_psql_dump_db "$db_name" > db.sql
+ynh_psql_dump_db --database="$db_name" > db.sql
 
 #=================================================
 # SPECIFIC BACKUP
 #=================================================
 # BACKUP SYSTEMD
 #=================================================
-ynh_print_info "Backing up systemd configuration..."
+ynh_print_info --message="Backing up systemd configuration..."
 
-ynh_backup "/etc/systemd/system/$app.service"
+ynh_backup --src_path="/etc/systemd/system/$app.service"
 
 #=================================================
 # END OF SCRIPT
 #=================================================
 
-ynh_print_info "Backup script completed for $app. (YunoHost will then actually copy those files to the archive)."
+ynh_print_info --message="Backup script completed for $app. (YunoHost will then actually copy those files to the archive)."

scripts/change_url

@@ -12,7 +12,7 @@ source /usr/share/yunohost/helpers
 #=================================================
 # RETRIEVE ARGUMENTS
 #=================================================
-ynh_print_info "Retrieve arguments from the manifest"
+ynh_print_info --message="Retrieve arguments from the manifest"
 
 old_domain=$YNH_APP_OLD_DOMAIN
 old_path=$YNH_APP_OLD_PATH
@@ -25,14 +25,15 @@ app=$YNH_APP_INSTANCE_NAME
 #=================================================
 # LOAD SETTINGS
 #=================================================
-ynh_print_info "Loading installation settings..."
+ynh_script_progression --message="Loading installation settings..." --time --weight=1
 
 # Needed for helper "ynh_add_nginx_config"
-final_path=$(ynh_app_setting_get $app final_path)
+final_path=$(ynh_app_setting_get --app=$app --key=final_path)
 
 # Add settings here as needed by your application
-#db_name=$(ynh_app_setting_get "$app" db_name)
+#db_name=$(ynh_app_setting_get --app=$app --key=db_name)
-#db_pwd=$(ynh_app_setting_get $app db_pwd)
+#db_user=$db_name
+#db_pwd=$(ynh_app_setting_get --app=$app --key=db_pwd)
 
 #=================================================
 # CHECK WHICH PARTS SHOULD BE CHANGED
@@ -52,10 +53,17 @@ fi
 
 #=================================================
 # STANDARD MODIFICATIONS
+#=================================================
+# STOP SYSTEMD SERVICE
+#=================================================
+ynh_print_info --message="Stopping a systemd service..."
+
+ynh_systemd_action --service_name=$app --action="stop"
+
 #=================================================
 # MODIFY URL IN NGINX CONF
 #=================================================
-ynh_print_info "Updating nginx web server configuration..."
+ynh_print_info --message="Updating nginx web server configuration..."
 
 nginx_conf_path=/etc/nginx/conf.d/$old_domain.d/$app.conf
 
@@ -63,7 +71,7 @@ nginx_conf_path=/etc/nginx/conf.d/$old_domain.d/$app.conf
 if [ $change_path -eq 1 ]
 then
 	# Make a backup of the original nginx config file if modified
-	ynh_backup_if_checksum_is_different "$nginx_conf_path"
+	ynh_backup_if_checksum_is_different --file="$nginx_conf_path"
 	# Set global variables for nginx helper
 	domain="$old_domain"
 	path_url="$new_path"
@@ -75,23 +83,30 @@ fi
 if [ $change_domain -eq 1 ]
 then
 	# Delete file checksum for the old conf file location
-	ynh_delete_file_checksum "$nginx_conf_path"
+	ynh_delete_file_checksum --file="$nginx_conf_path"
 	mv $nginx_conf_path /etc/nginx/conf.d/$new_domain.d/$app.conf
 	# Store file checksum for the new config file location
-	ynh_store_file_checksum "/etc/nginx/conf.d/$new_domain.d/$app.conf"
+	ynh_store_file_checksum --file="/etc/nginx/conf.d/$new_domain.d/$app.conf"
 fi
 
 #=================================================
 # GENERIC FINALISATION
+#=================================================
+# START SYSTEMD SERVICE
+#=================================================
+ynh_print_info --message="Starting a systemd service..."
+
+ynh_systemd_action --service_name=$app --action="start"
+
 #=================================================
 # RELOAD NGINX
 #=================================================
-ynh_print_info "Reloading nginx web server..."
+ynh_print_info --message="Reloading nginx web server..."
 
-systemctl reload nginx
+ynh_systemd_action --service_name=nginx --action=reload
 
 #=================================================
 # END OF SCRIPT
 #=================================================
 
-ynh_print_info "Change of URL completed for $app"
+ynh_print_info --message="Change of URL completed for $app"

scripts/install

@@ -32,67 +32,68 @@ app=$YNH_APP_INSTANCE_NAME
 #=================================================
 # CHECK IF THE APP CAN BE INSTALLED WITH THESE ARGS
 #=================================================
-ynh_print_info "Validating installation parameters..."
+ynh_print_info --message="Validating installation parameters..."
 
 final_path=/var/www/$app
-test ! -e "$final_path" || ynh_die "This path already contains a folder"
+test ! -e "$final_path" || ynh_die --message="This path already contains a folder"
 
 # Register (book) web path
-ynh_webpath_register $app $domain $path_url
+ynh_webpath_register --app=$app --domain=$domain --path_url=$path_url
 
 #=================================================
 # STORE SETTINGS FROM MANIFEST
 #=================================================
-ynh_print_info "Storing installation settings..."
+ynh_print_info --message="Storing installation settings..."
 
-ynh_app_setting_set $app domain $domain
+ynh_app_setting_set --app=$app --key=domain --value=$domain
-ynh_app_setting_set $app path $path_url
+ynh_app_setting_set --app=$app --key=path --value=$path_url
-ynh_app_setting_set $app is_public $is_public
+ynh_app_setting_set --app=$app --key=is_public --value=$is_public
 
 #=================================================
 # STANDARD MODIFICATIONS
 #=================================================
 # FIND AND OPEN A PORT
 #=================================================
-ynh_print_info "Configuring firewall ..."
+ynh_print_info --message="Configuring firewall..."
 
 # Find a free port
-port=$(ynh_find_port 8095)
+port=$(ynh_find_port --port=8095)
-ynh_app_setting_set $app port $port
+ynh_app_setting_set --app=$app --key=port --value=$port
 
 #=================================================
 # INSTALL DEPENDENCIES
 #=================================================
-ynh_print_info "Installing dependencies..."
+ynh_print_info --message="Installing dependencies..."
 
-ynh_install_nodejs 10
+ynh_install_nodejs --nodejs_version="10"
 ynh_install_app_dependencies $pkg_dependencies
 
 #=================================================
 # CREATE A POSTGRESQL DATABASE
 #=================================================
-ynh_print_info "Creating a PostgreSQL database..."
+ynh_print_info --message="Creating a PostgreSQL database..."
 
-db_name=$(ynh_sanitize_dbid $app)
+db_name=$(ynh_sanitize_dbid --db_name=$app)
-db_pwd=$(ynh_string_random 30)
+db_user=$db_name
-ynh_app_setting_set "$app" db_name "$db_name"
+db_pwd=$(ynh_string_random --length=30)
-ynh_app_setting_set "$app" db_pwd "$db_pwd"
+ynh_app_setting_set --app=$app --key=db_name --value=$db_name
+ynh_app_setting_set --app=$app --key=db_pwd --value=$db_pwd
 ynh_psql_test_if_first_run
-ynh_psql_setup_db "$db_name" "$db_name" "$db_pwd"
+ynh_psql_setup_db --db_user=$db_user --db_name=$db_name --db_pwd=$db_pwd
 
 #=================================================
 # DOWNLOAD, CHECK AND UNPACK SOURCE
 #=================================================
-ynh_print_info "Setting up source files ..."
+ynh_print_info --message="Setting up source files..."
 
-ynh_app_setting_set $app final_path $final_path
+ynh_app_setting_set --app=$app --key=final_path --value=$final_path
 # Download, check integrity, uncompress and patch the source from app.src
-ynh_setup_source "$final_path"
+ynh_setup_source --dest_dir="$final_path"
 
 #=================================================
 # NGINX CONFIGURATION
 #=================================================
-ynh_print_info "Configuring nginx web server..."
+ynh_print_info --message="Configuring nginx web server..."
 
 # Create a dedicated nginx config
 ynh_add_nginx_config
@@ -100,20 +101,20 @@ ynh_add_nginx_config
 #=================================================
 # CREATE DEDICATED USER
 #=================================================
-ynh_print_info "Configuring system user ..."
+ynh_print_info --message="Configuring system user ..."
 
 # Create a system user
-ynh_system_user_create "$app" "$final_path"
+ynh_system_user_create --username=$app --home_dir="$final_path"
 
 #=================================================
 # SPECIFIC SETUP
 #=================================================
 # SETUP SYSTEMD
 #=================================================
-ynh_print_info "Configuring a systemd service ..."
+ynh_print_info --message="Configuring a systemd service..."
 
 # Create a dedicated systemd config
-ynh_replace_string "__NODEJS_PATH__" "$nodejs_path" "../conf/systemd.service"
+ynh_replace_string --match_string="__NODEJS_PATH__" --replace_string="$nodejs_path" --target_file="../conf/systemd.service"
 ynh_add_systemd_config
 
 #=================================================
@@ -122,16 +123,16 @@ ynh_add_systemd_config
 
 cp -f ../conf/config.sample.yml "$final_path/config.yml"
 
-ynh_replace_string "__PORT__" "$port" "$final_path/config.yml"
+ynh_replace_string --match_string="__PORT__" --replace_string="$port" --target_file="$final_path/config.yml"
-ynh_replace_string "__DB_PWD__" "$db_pwd" "$final_path/config.yml"
+ynh_replace_string --match_string="__DB_PWD__" --replace_string="$db_pwd" --target_file="$final_path/config.yml"
-ynh_replace_string "__DB_NAME__" "$db_name" "$final_path/config.yml"
+ynh_replace_string --match_string="__DB_NAME__" --replace_string="$db_name" --target_file="$final_path/config.yml"
 
 #=================================================
 # STORE THE CONFIG FILE CHECKSUM
 #=================================================
 
 # Calculate and store the config file checksum into the app settings
-ynh_store_file_checksum "$final_path/config.yml"
+ynh_store_file_checksum --file="$final_path/config.yml"
 
 #=================================================
 # GENERIC FINALIZATION
@@ -149,35 +150,35 @@ chown -R "$app":"$app" "$final_path"
 # if using yunohost version 3.2 or more in the 'manifest.json', a description can be added
 yunohost service add $app --description "$app daemon for Wiki.js" -t systemd
 
+#=================================================
+# START SYSTEMD SERVICE
+#=================================================
+
+ynh_systemd_action --service_name=$app --action=start --line_match="Browse to http://localhost" --log_path=systemd
+
+sleep 30
+
 #=================================================
 # SETUP SSOWAT
 #=================================================
-ynh_print_info "Configuring SSOwat ..."
+ynh_print_info --message="Configuring SSOwat..."
 
 # Make app public if necessary
 if [ $is_public -eq 1 ]
 then
 	# unprotected_uris allows SSO credentials to be passed anyway.
-	ynh_app_setting_set $app unprotected_uris "/"
+	ynh_app_setting_set --app=$app --key=unprotected_uris --value="/"
 fi
 
 #=================================================
 # RELOAD NGINX
 #=================================================
-ynh_print_info "Reloading nginx web server..."
+ynh_print_info --message="Reloading nginx web server..."
 
-systemctl reload nginx
+ynh_systemd_action --service_name=nginx --action=reload
-
-#=================================================
-# START SERVICE
-#=================================================
-
-ynh_systemd_action --action=start --service_name=$app --line_match="Browse to http://localhost" --log_path=systemd
-
-sleep 30
 
 #=================================================
 # END OF SCRIPT
 #=================================================
 
-ynh_print_info "Installation of $app completed"
+ynh_print_info --message="Installation of $app completed"

scripts/remove

@@ -12,14 +12,15 @@ source /usr/share/yunohost/helpers
 #=================================================
 # LOAD SETTINGS
 #=================================================
-ynh_print_info "Loading installation settings..."
+ynh_print_info --message="Loading installation settings..."
 
 app=$YNH_APP_INSTANCE_NAME
 
-domain=$(ynh_app_setting_get $app domain)
+domain=$(ynh_app_setting_get --app=$app --key=domain)
-port=$(ynh_app_setting_get $app port)
+port=$(ynh_app_setting_get --app=$app --key=port)
-db_name=$(ynh_app_setting_get $app db_name)
+db_name=$(ynh_app_setting_get --app=$app --key=db_name)
-final_path=$(ynh_app_setting_get $app final_path)
+db_user=$db_name
+final_path=$(ynh_app_setting_get --app=$app --key=final_path)
 
 #=================================================
 # STANDARD REMOVE
@@ -28,16 +29,16 @@ final_path=$(ynh_app_setting_get $app final_path)
 #=================================================
 
 # Remove a service from the admin panel, added by `yunohost service add`
-if yunohost service status | grep -q $app
+if yunohost service status $app >/dev/null 2>&1
 then
-	ynh_print_info "Removing $app service"
+	ynh_print_info --message="Removing $app service..."
 	yunohost service remove $app
 fi
 
 #=================================================
 # STOP AND REMOVE SERVICE
 #=================================================
-ynh_print_info "Stopping and removing the systemd service"
+ynh_print_info --message="Stopping and removing the systemd service..."
 
 # Remove the dedicated systemd config
 ynh_remove_systemd_config
@@ -45,33 +46,32 @@ ynh_remove_systemd_config
 #=================================================
 # REMOVE THE POSTGRESQL DATABASE
 #=================================================
-ynh_print_info "Removing the PostgreSQL database"
+ynh_print_info --message="Removing the PostgreSQL database..."
 
 # Remove a database if it exists, along with the associated user
-ynh_psql_remove_db "$db_name" "$db_name"
+ynh_psql_remove_db --db_user=$db_user --db_name=$db_name
 
 #=================================================
 # REMOVE DEPENDENCIES
 #=================================================
-ynh_print_info "Removing dependencies"
+ynh_print_info --message="Removing dependencies..."
 
 # Remove metapackage and its dependencies
 ynh_remove_app_dependencies
-ynh_use_nodejs
 ynh_remove_nodejs
 
 #=================================================
 # REMOVE APP MAIN DIR
 #=================================================
-ynh_print_info "Removing app main directory"
+ynh_print_info --message="Removing app main directory..."
 
 # Remove the app directory securely
-ynh_secure_remove "$final_path"
+ynh_secure_remove --file="$final_path"
 
 #=================================================
 # REMOVE NGINX CONFIGURATION
 #=================================================
-ynh_print_info "Removing nginx web server configuration"
+ynh_print_info --message="Removing nginx web server configuration..."
 
 # Remove the dedicated nginx config
 ynh_remove_nginx_config
@@ -82,34 +82,22 @@ ynh_remove_nginx_config
 
 if yunohost firewall list | grep -q "\- $port$"
 then
-	ynh_print_info "Closing port $port"
+	ynh_script_progression --message="Closing port $port..."
 	ynh_exec_warn_less yunohost firewall disallow TCP $port
 fi
 
-#=================================================
-# SPECIFIC REMOVE
-#=================================================
-# REMOVE THE CRON FILE
-#=================================================
-
-# Remove a directory securely
-ynh_secure_remove "/etc/$app/"
-
-# Remove the log files
-ynh_secure_remove "/var/log/$app/"
-
 #=================================================
 # GENERIC FINALIZATION
 #=================================================
 # REMOVE DEDICATED USER
 #=================================================
-ynh_print_info "Removing the dedicated system user"
+ynh_print_info --message="Removing the dedicated system user..."
 
 # Delete a system user
-ynh_system_user_delete $app
+ynh_system_user_delete --username=$app
 
 #=================================================
 # END OF SCRIPT
 #=================================================
 
-ynh_print_info "Removal of $app completed"
+ynh_print_info --message="Removal of $app completed"

scripts/restore

@@ -7,7 +7,6 @@
 #=================================================
 
 source ../settings/scripts/_common.sh
-source ../settings/scripts/ynh_systemd_action
 source /usr/share/yunohost/helpers
 
 #=================================================
@@ -23,25 +22,26 @@ ynh_abort_if_errors
 #=================================================
 # LOAD SETTINGS
 #=================================================
-ynh_print_info "Loading settings..."
+ynh_print_info --message="Loading settings..."
 
 app=$YNH_APP_INSTANCE_NAME
 
-domain=$(ynh_app_setting_get $app domain)
+domain=$(ynh_app_setting_get --app=$app --key=domain)
-path_url=$(ynh_app_setting_get $app path)
+path_url=$(ynh_app_setting_get --app=$app --key=path)
-final_path=$(ynh_app_setting_get $app final_path)
+final_path=$(ynh_app_setting_get --app=$app --key=final_path)
-db_name=$(ynh_app_setting_get $app db_name)
+db_name=$(ynh_app_setting_get --app=$app --key=db_name)
-db_pwd=$(ynh_app_setting_get $app db_pwd)
+db_user=$db_name
+db_pwd=$(ynh_app_setting_get --app=$app --key=db_pwd)
 
 #=================================================
 # CHECK IF THE APP CAN BE RESTORED
 #=================================================
-ynh_print_info "Validating restoration parameters..."
+ynh_print_info --message="Validating restoration parameters..."
 
-ynh_webpath_available $domain $path_url \
+ynh_webpath_available --domain=$domain --path_url=$path_url \
-	|| ynh_die "Path not available: ${domain}${path_url}"
+	|| ynh_die --message="Path not available: ${domain}${path_url}"
 test ! -d $final_path \
-	|| ynh_die "There is already a directory: $final_path "
+	|| ynh_die --message="There is already a directory: $final_path "
 
 #=================================================
 # STANDARD RESTORATION STEPS
@@ -49,22 +49,22 @@ test ! -d $final_path \
 # RESTORE THE NGINX CONFIGURATION
 #=================================================
 
-ynh_restore_file "/etc/nginx/conf.d/$domain.d/$app.conf"
+ynh_restore_file --origin_path="/etc/nginx/conf.d/$domain.d/$app.conf"
 
 #=================================================
 # RESTORE THE APP MAIN DIR
 #=================================================
-ynh_print_info "Restoring the app main directory..."
+ynh_print_info --message="Restoring the app main directory..."
 
-ynh_restore_file "$final_path"
+ynh_restore_file --origin_path="$final_path"
 
 #=================================================
 # RECREATE THE DEDICATED USER
 #=================================================
-ynh_print_info "Recreating the dedicated system user..."
+ynh_print_info --message="Recreating the dedicated system user..."
 
 # Create the dedicated user (if not existing)
-ynh_system_user_create "$app" "$final_path"
+ynh_system_user_create --username=$app --home_dir="$final_path"
 
 #=================================================
 # RESTORE USER RIGHTS
@@ -78,31 +78,30 @@ chown -R "$app":"$app" "$final_path"
 #=================================================
 # REINSTALL DEPENDENCIES
 #=================================================
-ynh_print_info "Reinstalling dependencies..."
+ynh_print_info --message="Reinstalling dependencies..."
 
 # Define and install dependencies
 
-ynh_install_nodejs 10
+ynh_install_nodejs --nodejs_version="10"
 
 ynh_install_app_dependencies $pkg_dependencies
 
 #=================================================
 # RESTORE THE POSTGRESQL DATABASE
 #=================================================
-ynh_print_info "Restoring the PostgreSQL database..."
+ynh_print_info --message="Restoring the PostgreSQL database..."
 
 ynh_psql_test_if_first_run
-ynh_psql_setup_db "$db_name" "$db_name" "$db_pwd"
+ynh_psql_setup_db --db_user=$db_user --db_name=$db_name --db_pwd=$db_pwd
-ynh_psql_execute_file_as_root ./db.sql "$db_name"
+ynh_psql_execute_file_as_root --file="./db.sql" --database="$db_name"
 
 #=================================================
 # RESTORE SYSTEMD
 #=================================================
-ynh_print_info "Restoring the systemd configuration..."
+ynh_print_info --message="Restoring the systemd configuration..."
 
-ynh_restore_file "/etc/systemd/system/$app.service"
+ynh_restore_file --origin_path="/etc/systemd/system/$app.service"
 systemctl enable $app.service
-systemctl daemon-reload
 
 #=================================================
 # ADVERTISE SERVICE IN ADMIN PANEL
@@ -110,25 +109,26 @@ systemctl daemon-reload
 
 yunohost service add $app --description "$app daemon for Wiki.js" -t systemd
 
+#=================================================
+# START SYSTEMD SERVICE
+#=================================================
+ynh_print_info --message="Starting a systemd service..."
+
+ynh_systemd_action --service_name=$app --action=start --log_path=systemd
+
+sleep 30
+
 #=================================================
 # GENERIC FINALIZATION
 #=================================================
 # RELOAD NGINX
 #=================================================
-ynh_print_info "Reloading nginx web server..."
+ynh_print_info --message="Reloading nginx web server..."
 
-systemctl reload nginx
+ynh_systemd_action --service_name=nginx --action=reload
-
-#=================================================
-# START SERVICE
-#=================================================
-
-ynh_systemd_action --action=start --service_name=$app --log_path=systemd
-
-sleep 30
 
 #=================================================
 # END OF SCRIPT
 #=================================================
 
-ynh_print_info "Restoration completed for $app"
+ynh_print_info --message="Restoration completed for $app"

scripts/upgrade

@@ -12,51 +12,57 @@ source /usr/share/yunohost/helpers
 #=================================================
 # LOAD SETTINGS
 #=================================================
-ynh_print_info "Loading installation settings..."
+ynh_print_info --message="Loading installation settings..."
 
 app=$YNH_APP_INSTANCE_NAME
 
-domain=$(ynh_app_setting_get $app domain)
+domain=$(ynh_app_setting_get --app=$app --key=domain)
-path_url=$(ynh_app_setting_get $app path)
+path_url=$(ynh_app_setting_get --app=$app --key=path)
 
-is_public=$(ynh_app_setting_get $app is_public)
+is_public=$(ynh_app_setting_get --app=$app --key=is_public)
-final_path=$(ynh_app_setting_get $app final_path)
+final_path=$(ynh_app_setting_get --app=$app --key=final_path)
 
-db_name=$(ynh_app_setting_get $app db_name)
+db_name=$(ynh_app_setting_get --app=$app --key=db_name)
-db_pwd=$(ynh_app_setting_get $app db_pwd)
+db_pwd=$(ynh_app_setting_get --app=$app --key=db_pwd)
-port=$(ynh_app_setting_get $app port)
+port=$(ynh_app_setting_get --app=$app --key=port)
+
+#=================================================
+# CHECK VERSION
+#=================================================
+
+upgrade_type=$(ynh_check_app_version_changed)
 
 #=================================================
 # ENSURE DOWNWARD COMPATIBILITY
 #=================================================
-ynh_print_info "Ensuring downward compatibility..."
+ynh_print_info --message="Ensuring downward compatibility..."
 
 # Fix is_public as a boolean value
 if [ "$is_public" = "Yes" ]; then
-	ynh_app_setting_set $app is_public 1
+	ynh_app_setting_set --app=$app --key=is_public --value=1
 	is_public=1
 elif [ "$is_public" = "No" ]; then
-	ynh_app_setting_set $app is_public 0
+	ynh_app_setting_set --app=$app --key=is_public --value=0
 	is_public=0
 fi
 
 # If db_name doesn't exist, create it
-if [ -z $db_name ]; then
+if [ -z "$db_name" ]; then
-	db_name=$(ynh_sanitize_dbid $app)
+	db_name=$(ynh_sanitize_dbid --db_name=$app)
-	ynh_app_setting_set $app db_name $db_name
+	ynh_app_setting_set --app=$app --key=db_name --value=$db_name
 fi
 
 # If final_path doesn't exist, create it
-if [ -z $final_path ]; then
+if [ -z "$final_path" ]; then
 	final_path=/var/www/$app
-	ynh_app_setting_set $app final_path $final_path
+	ynh_app_setting_set --app=$app --key=final_path --value=$final_path
 fi
 
 # Remove yarn repository
-ynh_secure_remove "/etc/apt/sources.list.d/yarn.list"
+ynh_secure_remove --file="/etc/apt/sources.list.d/yarn.list"
 
 # Remove old log file
-ynh_secure_remove "/var/log/$app/"
+ynh_secure_remove --file="/var/log/$app/"
 
 # Create PostgreSQL User
 ynh_psql_create_user $db_name $db_pwd
@@ -64,7 +70,7 @@ ynh_psql_create_user $db_name $db_pwd
 #=================================================
 # BACKUP BEFORE UPGRADE THEN ACTIVE TRAP
 #=================================================
-ynh_print_info "Backing up the app before upgrading (may take a while)..."
+ynh_print_info --message="Backing up the app before upgrading (may take a while)..."
 
 # Backup the current version of the app
 ynh_backup_before_upgrade
@@ -76,33 +82,38 @@ ynh_clean_setup () {
 # Exit if an error occurs during the execution of the script
 ynh_abort_if_errors
 
-#=================================================
-# STOP SERVICE
-#=================================================
-
-ynh_systemd_action --action=stop --service_name=$app
-
 #=================================================
 # CHECK THE PATH
 #=================================================
 
 # Normalize the URL path syntax
-path_url=$(ynh_normalize_url_path $path_url)
+
+path_url=$(ynh_normalize_url_path --path_url=$path_url)
 
 #=================================================
 # STANDARD UPGRADE STEPS
+#=================================================
+# STOP SYSTEMD SERVICE
+#=================================================
+
+ynh_systemd_action --service_name=$app --action="stop"
+
 #=================================================
 # DOWNLOAD, CHECK AND UNPACK SOURCE
 #=================================================
-ynh_print_info "Upgrading source files..."
 
-# Download, check integrity, uncompress and patch the source from app.src
+if [ "$upgrade_type" == "UPGRADE_APP" ]
-ynh_setup_source "$final_path"
+then
+	ynh_print_info --message="Upgrading source files..."
+
+	# Download, check integrity, uncompress and patch the source from app.src
+	ynh_setup_source --dest_dir="$final_path"
+fi
 
 #=================================================
 # NGINX CONFIGURATION
 #=================================================
-ynh_print_info "Upgrading nginx web server configuration..."
+ynh_print_info --message="Upgrading nginx web server configuration..."
 
 # Create a dedicated nginx config
 ynh_add_nginx_config
@@ -110,19 +121,19 @@ ynh_add_nginx_config
 #=================================================
 # UPGRADE DEPENDENCIES
 #=================================================
-ynh_print_info "Upgrading dependencies..."
+ynh_print_info --message="Upgrading dependencies..."
 
-ynh_install_nodejs 10
+ynh_install_nodejs --nodejs_version="10"
 
 ynh_install_app_dependencies $pkg_dependencies
 
 #=================================================
 # CREATE DEDICATED USER
 #=================================================
-ynh_print_info "Making sure dedicated system user exists..."
+ynh_print_info --message="Making sure dedicated system user exists..."
 
 # Create a dedicated user (if not existing)
-ynh_system_user_create "$app" "$final_path"
+ynh_system_user_create --username=$app --home_dir="$final_path"
 
 #=================================================
 # MODIFY A CONFIG FILE
@@ -130,21 +141,25 @@ ynh_system_user_create "$app" "$final_path"
 
 cp -f ../conf/config.sample.yml "$final_path/config.yml"
 
-ynh_replace_string "__PORT__" "$port" "$final_path/config.yml"
+ynh_replace_string --match_string="__PORT__" --replace_string="$port" --target_file="$final_path/config.yml"
-ynh_replace_string "__DB_PWD__" "$db_pwd" "$final_path/config.yml"
+ynh_replace_string --match_string="__DB_PWD__" --replace_string="$db_pwd" --target_file="$final_path/config.yml"
-ynh_replace_string "__DB_NAME__" "$db_name" "$final_path/config.yml"
+ynh_replace_string --match_string="__DB_NAME__" --replace_string="$db_name" --target_file="$final_path/config.yml"
 
-ynh_backup_if_checksum_is_different "$final_path/config.yml"
+#=================================================
+# STORE THE CONFIG FILE CHECKSUM
+#=================================================
+
+ynh_backup_if_checksum_is_different --file="$final_path/config.yml"
 # Recalculate and store the checksum of the file for the next upgrade.
-ynh_store_file_checksum "$final_path/config.yml"
+ynh_store_file_checksum --file="$final_path/config.yml"
 
 #=================================================
 # SETUP SYSTEMD
 #=================================================
-ynh_print_info "Upgrading systemd configuration..."
+ynh_print_info --message="Upgrading systemd configuration..."
 
 # Create a dedicated systemd config
-ynh_replace_string "__NODEJS_PATH__" "$nodejs_path" "../conf/systemd.service"
+ynh_replace_string --match_string="__NODEJS_PATH__" --replace_string="$nodejs_path" --target_file="../conf/systemd.service"
 ynh_add_systemd_config
 
 #=================================================
@@ -159,32 +174,32 @@ chown -R "$app":"$app" "$final_path"
 #=================================================
 # SETUP SSOWAT
 #=================================================
-ynh_print_info "Upgrading SSOwat configuration..."
+ynh_print_info --message="Upgrading SSOwat configuration..."
 
 # Make app public if necessary
 if [ $is_public -eq 1 ]
 then
 	# unprotected_uris allows SSO credentials to be passed anyway
-	ynh_app_setting_set $app unprotected_uris "/"
+	ynh_app_setting_set --app=$app --key=unprotected_uris --value="/"
 fi
 
-#=================================================
-# RELOAD NGINX
-#=================================================
-ynh_print_info "Reloading nginx web server..."
-
-systemctl reload nginx
-
 #=================================================
 # START SERVICE
 #=================================================
 
-ynh_systemd_action --action=start --service_name=$app --log_path=systemd
+ynh_systemd_action --service_name=$app --action="start" --log_path=systemd
 
 sleep 30
 
+#=================================================
+# RELOAD NGINX
+#=================================================
+ynh_print_info --message="Reloading nginx web server..."
+
+ynh_systemd_action --service_name=nginx --action=reload
+
 #=================================================
 # END OF SCRIPT
 #=================================================
 
-ynh_print_info "Upgrade of $app completed"
+ynh_print_info --message="Upgrade of $app completed"