diff --git a/.github/ISSUE_TEMPLATE.md b/.github/ISSUE_TEMPLATE.md
new file mode 100644
index 0000000..2729a6b
--- /dev/null
+++ b/.github/ISSUE_TEMPLATE.md
@@ -0,0 +1,55 @@
+---
+name: Bug report
+about: When creating a bug report, please use the following template to provide all the relevant information and help debugging efficiently.
+
+---
+
+**How to post a meaningful bug report**
+1. *Read this whole template first.*
+2. *Determine if you are on the right place:*
+   - *If you were performing an action on the app from the webadmin or the CLI (install, update, backup, restore, change_url...), you are on the right place!*
+   - *Otherwise, the issue may be due to the app itself. Refer to its documentation or repository for help.*
+   - *When in doubt, post here and we will figure it out together.*
+3. *Delete the italic comments as you write over them below, and remove this guide.*
+--- 
+
+### Describe the bug
+
+*A clear and concise description of what the bug is.*
+
+### Context
+
+- Hardware: *VPS bought online / Old laptop or computer / Raspberry Pi at home / Internet Cube with VPN / Other ARM board / ...*
+- YunoHost version: x.x.x
+- I have access to my server: *Through SSH | through the webadmin | direct access via keyboard / screen | ...*
+- Are you in a special context or did you perform some particular tweaking on your YunoHost instance?: *no / yes*
+  - If yes, please explain:
+- Using, or trying to install package version/branch:
+- If upgrading, current package version: *can be found in the admin, or with `yunohost app info $app_id`*
+
+### Steps to reproduce
+
+- *If you performed a command from the CLI, the command itself is enough. For example:*
+    ```sh
+    sudo yunohost app install the_app
+    ```
+- *If you used the webadmin, please perform the equivalent command from the CLI first.*
+- *If the error occurs in your browser, explain what you did:*
+   1. *Go to '...'*
+   2. *Click on '...'*
+   3. *Scroll down to '...'*
+   4. *See error*
+
+### Expected behavior
+
+*A clear and concise description of what you expected to happen. You can remove this section if the command above is enough to understand your intent.*
+
+### Logs
+
+*When an operation fails, YunoHost provides a simple way to share the logs.*
+- *In the webadmin, the error message contains a link to the relevant log page. On that page, you will be able to 'Share with Yunopaste'. If you missed it, the logs of previous operations are also available under Tools > Logs.*
+- *In command line, the command to share the logs is displayed at the end of the operation and looks like `yunohost log display [log name] --share`. If you missed it, you can find the log ID of a previous operation using `yunohost log list`.*
+
+*After sharing the log, please copypaste directly the link provided by YunoHost (to help readability, no need to copypaste the entire content of the log here, just the link is enough...)*
+
+*If applicable and useful, add screenshots to help explain your problem.*
diff --git a/.github/PULL_REQUEST_TEMPLATE.md b/.github/PULL_REQUEST_TEMPLATE.md
new file mode 100644
index 0000000..ef70e18
--- /dev/null
+++ b/.github/PULL_REQUEST_TEMPLATE.md
@@ -0,0 +1,16 @@
+## Problem
+
+- *Description of why you made this PR*
+
+## Solution
+
+- *And how do you fix that problem*
+
+## PR Status
+
+- [ ] Code finished and ready to be reviewed/tested
+- [ ] The fix/enhancement were manually tested (if applicable)
+
+## Automatic tests
+
+Automatic tests can be triggered on https://ci-apps-dev.yunohost.org/ *after creating the PR*, by commenting "!testme", "!gogogadgetoci" or "By the power of systemd, I invoke The Great App CI to test this Pull Request!". (N.B. : for this to work you need to be a member of the Yunohost-Apps organization)
diff --git a/.github/workflows/updater.sh b/.github/workflows/updater.sh
new file mode 100755
index 0000000..72eb5cb
--- /dev/null
+++ b/.github/workflows/updater.sh
@@ -0,0 +1,137 @@
+#!/bin/bash
+
+#=================================================
+# PACKAGE UPDATING HELPER
+#=================================================
+
+# This script is meant to be run by GitHub Actions
+# The YunoHost-Apps organisation offers a template Action to run this script periodically
+# Since each app is different, maintainers can adapt its contents so as to perform
+# automatic actions when a new upstream release is detected.
+
+# Remove this exit command when you are ready to run this Action
+exit 1
+
+#=================================================
+# FETCHING LATEST RELEASE AND ITS ASSETS
+#=================================================
+
+# Fetching information
+current_version=$(cat manifest.json | jq -j '.version|split("~")[0]')
+repo=$(cat manifest.json | jq -j '.upstream.code|split("https://github.com/")[1]')
+# Some jq magic is needed, because the latest upstream release is not always the latest version (e.g. security patches for older versions)
+version=$(curl --silent "https://api.github.com/repos/$repo/releases" | jq -r '.[] | select( .prerelease != true ) | .tag_name' | sort -V | tail -1)
+assets=($(curl --silent "https://api.github.com/repos/$repo/releases" | jq -r '[ .[] | select(.tag_name=="'$version'").assets[].browser_download_url ] | join(" ") | @sh' | tr -d "'"))
+
+# Later down the script, we assume the version has only digits and dots
+# Sometimes the release name starts with a "v", so let's filter it out.
+# You may need more tweaks here if the upstream repository has different naming conventions. 
+if [[ ${version:0:1} == "v" || ${version:0:1} == "V" ]]; then
+    version=${version:1}
+fi
+
+# Setting up the environment variables
+echo "Current version: $current_version"
+echo "Latest release from upstream: $version"
+echo "VERSION=$version" >> $GITHUB_ENV
+echo "REPO=$repo" >> $GITHUB_ENV
+# For the time being, let's assume the script will fail
+echo "PROCEED=false" >> $GITHUB_ENV
+
+# Proceed only if the retrieved version is greater than the current one
+if ! dpkg --compare-versions "$current_version" "lt" "$version" ; then
+    echo "::warning ::No new version available"
+    exit 0
+# Proceed only if a PR for this new version does not already exist
+elif git ls-remote -q --exit-code --heads https://github.com/$GITHUB_REPOSITORY.git ci-auto-update-v$version ; then
+    echo "::warning ::A branch already exists for this update"
+    exit 0
+fi
+
+# Each release can hold multiple assets (e.g. binaries for different architectures, source code, etc.)
+echo "${#assets[@]} available asset(s)"
+
+#=================================================
+# UPDATE SOURCE FILES
+#=================================================
+
+# Here we use the $assets variable to get the resources published in the upstream release.
+# Here is an example for Grav, it has to be adapted in accordance with how the upstream releases look like.
+
+# Let's loop over the array of assets URLs
+for asset_url in ${assets[@]}; do
+
+echo "Handling asset at $asset_url"
+
+# Assign the asset to a source file in conf/ directory
+# Here we base the source file name upon a unique keyword in the assets url (admin vs. update)
+# Leave $src empty to ignore the asset
+case $asset_url in
+  *"admin"*)
+    src="app"
+    ;;
+  *"update"*)
+    src="app-upgrade"
+    ;;
+  *)
+    src=""
+    ;;
+esac
+
+# If $src is not empty, let's process the asset
+if [ ! -z "$src" ]; then
+
+# Create the temporary directory
+tempdir="$(mktemp -d)"
+
+# Download sources and calculate checksum
+filename=${asset_url##*/}
+curl --silent -4 -L $asset_url -o "$tempdir/$filename"
+checksum=$(sha256sum "$tempdir/$filename" | head -c 64)
+
+# Delete temporary directory
+rm -rf $tempdir
+
+# Get extension
+if [[ $filename == *.tar.gz ]]; then
+  extension=tar.gz
+else
+  extension=${filename##*.}
+fi
+
+# Rewrite source file
+cat <<EOT > conf/$src.src
+SOURCE_URL=$asset_url
+SOURCE_SUM=$checksum
+SOURCE_SUM_PRG=sha256sum
+SOURCE_FORMAT=$extension
+SOURCE_IN_SUBDIR=true
+SOURCE_FILENAME=
+EOT
+echo "... conf/$src.src updated"
+
+else
+echo "... asset ignored"
+fi
+
+done
+
+#=================================================
+# SPECIFIC UPDATE STEPS
+#=================================================
+
+# Any action on the app's source code can be done.
+# The GitHub Action workflow takes care of committing all changes after this script ends.
+
+#=================================================
+# GENERIC FINALIZATION
+#=================================================
+
+# Replace new version in manifest
+echo "$(jq -s --indent 4 ".[] | .version = \"$version~ynh1\"" manifest.json)" > manifest.json
+
+# No need to update the README, yunohost-bot takes care of it
+
+# The Action will proceed only if the PROCEED environment variable is set to true
+echo "PROCEED=true" >> $GITHUB_ENV
+exit 0
diff --git a/.gitignore b/.gitignore
new file mode 100644
index 0000000..783a4ae
--- /dev/null
+++ b/.gitignore
@@ -0,0 +1,2 @@
+*~
+*.sw[op]
diff --git a/.project b/.project
new file mode 100644
index 0000000..f3a6fb6
--- /dev/null
+++ b/.project
@@ -0,0 +1,11 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>Zwave-JS-UI_ynh</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+	</buildSpec>
+	<natures>
+	</natures>
+</projectDescription>
diff --git a/README.md b/README.md
new file mode 100644
index 0000000..34c5934
--- /dev/null
+++ b/README.md
@@ -0,0 +1,61 @@
+<!--
+N.B.: This README was automatically generated by https://github.com/YunoHost/apps/tree/master/tools/README-generator
+It shall NOT be edited by hand.
+-->
+
+# Zwave-JS-UI for YunoHost
+
+[![Integration level](https://dash.yunohost.org/integration/zwave-js-ui.svg)](https://dash.yunohost.org/appci/app/zwave-js-ui) ![Working status](https://ci-apps.yunohost.org/ci/badges/zwave-js-ui.status.svg) ![Maintenance status](https://ci-apps.yunohost.org/ci/badges/zwave-js-ui.maintain.svg)  
+[![Install Zwave-JS-UI with YunoHost](https://install-app.yunohost.org/install-with-yunohost.svg)](https://install-app.yunohost.org/?app=zwave-js-ui)
+
+*[Lire ce readme en français.](./README_fr.md)*
+
+> *This package allows you to install Zwave-JS-UI quickly and simply on a YunoHost server.
+If you don't have YunoHost, please consult [the guide](https://yunohost.org/#/install) to learn how to install it.*
+
+## Overview
+
+**!! WORK IN PROGRESS !! - DO NOT INSTALL YET**
+
+### Features
+
+Integrate zwave-js-ui natively in Domoticz_ynh.
+
+**Zwave-JS-UI**, also known under previous name ZWaveJS2MQTT, is a replacement for Openzwave. It exposes Z-Wave devices to an MQTT broker in a fully configurable manner.
+
+To work correctly, this app require **domoticz** with **mqtt broker Mosquitto** installed. Please refer to [domoticz package for Yunohost](https://github.com/YunoHost-Apps/domoticz_ynh) for more information about how to set up domoticz and Mosquitto.
+
+This app may also be usable with [Home-Assistant package](https://github.com/YunoHost-Apps/homeassistant_ynh) but I never tested it.
+
+**Shipped version:** 8.4.1~ynh1
+## Disclaimers / important information
+
+
+
+**!! WORK IN PROGRESS !! - DO NOT INSTALL YET**
+
+For now, although the package is fully functional (install, remove, backup, restore...), it is not yet integrated with domoticz and mosquitto package, this means that all settings needs to be done manually from inside the app.
+
+
+## Documentation and resources
+
+* Official app website: <https://zwave-js.github.io/zwave-js-ui/#/>
+* Official user documentation: <https://www.domoticz.com/wiki/Zwave-JS-UI>
+* Official admin documentation: <https://zwave-js.github.io/zwave-js-ui/#/>
+* Upstream app code repository: <https://github.com/zwave-js/zwave-js-ui>
+* YunoHost documentation for this app: <https://yunohost.org/app_zwave-js-ui>
+* Report a bug: <https://github.com/YunoHost-Apps/zwave-js-ui_ynh/issues>
+
+## Developer info
+
+Please send your pull request to the [testing branch](https://github.com/YunoHost-Apps/zwave-js-ui_ynh/tree/testing).
+
+To try the testing branch, please proceed like that.
+
+``` bash
+sudo yunohost app install https://github.com/YunoHost-Apps/zwave-js-ui_ynh/tree/testing --debug
+or
+sudo yunohost app upgrade zwave-js-ui -u https://github.com/YunoHost-Apps/zwave-js-ui_ynh/tree/testing --debug
+```
+
+**More info regarding app packaging:** <https://yunohost.org/packaging_apps>
diff --git a/README_fr.md b/README_fr.md
new file mode 100644
index 0000000..b2da8d7
--- /dev/null
+++ b/README_fr.md
@@ -0,0 +1,60 @@
+<!--
+N.B.: This README was automatically generated by https://github.com/YunoHost/apps/tree/master/tools/README-generator
+It shall NOT be edited by hand.
+-->
+
+# Zwave-JS-UI pour YunoHost
+
+[![Niveau d'intégration](https://dash.yunohost.org/integration/zwave-js-ui.svg)](https://dash.yunohost.org/appci/app/zwave-js-ui) ![Statut du fonctionnement](https://ci-apps.yunohost.org/ci/badges/zwave-js-ui.status.svg) ![Statut de maintenance](https://ci-apps.yunohost.org/ci/badges/zwave-js-ui.maintain.svg)  
+[![Installer Zwave-JS-UI avec YunoHost](https://install-app.yunohost.org/install-with-yunohost.svg)](https://install-app.yunohost.org/?app=zwave-js-ui)
+
+*[Read this readme in english.](./README.md)*
+
+> *Ce package vous permet d'installer Zwave-JS-UI rapidement et simplement sur un serveur YunoHost.
+Si vous n'avez pas YunoHost, regardez [ici](https://yunohost.org/#/install) pour savoir comment l'installer et en profiter.*
+
+## Vue d'ensemble
+
+
+**!! EN COURS DE CONSTRUCTION !! - NE PAS INSTALLER**
+
+### Fonctionnalités
+
+Intègre zwave-js-ui dans domoticz_ynh de façon native.
+
+**Zwave-JS-UI**, aussi connu sous le nom de ZWaveJS2MQTT, est un remplaçant pour Openzwave. Il permet d'exposer les terminaux Z-Wave à un broker  MQTT de façon complètement configurable.
+
+Pour fonctionner correctement, cette application nécessite d'avoir **domoticz** avec le **broker MQTT mosquitto** d'également installés. Veuillez vous reporter au [paquet domoticz pour Yunohost](https://github.com/YunoHost-Apps/domoticz_ynh) afin d'obtenir plus d'information sur comment le faire.
+
+Cette application fonctionne également peut-être avec [le paquet Home-Assistant](https://github.com/YunoHost-Apps/homeassistant_ynh) mais je ne l'ai jamais testée.
+
+**Version incluse :** 8.4.1~ynh1
+## Avertissements / informations importantes
+
+
+
+**!! EN COURS DE CONSTRUCTION !! - NE PAS INSTALLER**
+
+Pour l'instant, bien que le package fonctionne (installation, désinstallation, sauvegarde, restauration...), il n'est pas encore intégré avec domoticz et mosquitto, les paramétrages doivent être fait manuellement depuis l'application.
+## Documentations et ressources
+
+* Site officiel de l'app : <https://zwave-js.github.io/zwave-js-ui/#/>
+* Documentation officielle utilisateur : <https://www.domoticz.com/wiki/Zwave-JS-UI>
+* Documentation officielle de l'admin : <https://zwave-js.github.io/zwave-js-ui/#/>
+* Dépôt de code officiel de l'app : <https://github.com/zwave-js/zwave-js-ui>
+* Documentation YunoHost pour cette app : <https://yunohost.org/app_zwave-js-ui>
+* Signaler un bug : <https://github.com/YunoHost-Apps/zwave-js-ui_ynh/issues>
+
+## Informations pour les développeurs
+
+Merci de faire vos pull request sur la [branche testing](https://github.com/YunoHost-Apps/zwave-js-ui_ynh/tree/testing).
+
+Pour essayer la branche testing, procédez comme suit.
+
+``` bash
+sudo yunohost app install https://github.com/YunoHost-Apps/zwave-js-ui_ynh/tree/testing --debug
+ou
+sudo yunohost app upgrade zwave-js-ui -u https://github.com/YunoHost-Apps/zwave-js-ui_ynh/tree/testing --debug
+```
+
+**Plus d'infos sur le packaging d'applications :** <https://yunohost.org/packaging_apps>
diff --git a/check_process b/check_process
new file mode 100644
index 0000000..f3a5ec9
--- /dev/null
+++ b/check_process
@@ -0,0 +1,26 @@
+;; Test complet
+	; Manifest
+		domain="domain.tld"
+		path="/path"
+		is_public=0
+		port="8091"
+	; Checks
+		pkg_linter=1
+		setup_sub_dir=1
+		setup_root=1
+		setup_nourl=0
+		setup_private=1
+		setup_public=1
+		upgrade=1
+		upgrade=0	from_commit=CommitHash
+		backup_restore=1
+		multi_instance=0
+		port_already_use=1
+		change_url=1
+;;; Options
+Email=misterl56@hotmail.com
+Notification=none
+;;; Upgrade options
+	; commit=CommitHash
+		name=Name and date of the commit.
+		manifest_arg=domain=DOMAIN&path=PATH&is_public=1&language=fr&admin=USER&password=pass&port=666&
diff --git a/conf/app.src b/conf/app.src
new file mode 100644
index 0000000..9d96193
--- /dev/null
+++ b/conf/app.src
@@ -0,0 +1,6 @@
+SOURCE_URL=https://github.com/zwave-js/zwave-js-ui/releases/download/v8.4.1/zwave-js-ui-v8.4.1-linux.zip
+SOURCE_SUM=3adcfd96e10c87fd0161d0ebefe8e930f43f368946940cdea5060a2209be38de
+SOURCE_SUM_PRG=sha256sum
+SOURCE_FORMAT=zip
+SOURCE_IN_SUBDIR=false
+SOURCE_EXTRACT=true
diff --git a/conf/nginx.conf b/conf/nginx.conf
new file mode 100644
index 0000000..f990ff2
--- /dev/null
+++ b/conf/nginx.conf
@@ -0,0 +1,12 @@
+#sub_path_only rewrite ^__PATH__$ __PATH__/ permanent;
+location __PATH__/ {
+
+        proxy_set_header X-External-Path __PATH__;
+        proxy_http_version 1.1;
+        proxy_set_header Upgrade $http_upgrade;
+        proxy_set_header Connection $connection_upgrade;
+        proxy_pass	http://127.0.0.1:__PORT__/;
+        
+  # Include SSOWAT user panel.
+  include conf.d/yunohost_panel.conf.inc;
+}
diff --git a/conf/systemd.service b/conf/systemd.service
new file mode 100644
index 0000000..d4332cf
--- /dev/null
+++ b/conf/systemd.service
@@ -0,0 +1,45 @@
+[Unit]
+Description=Full featured Z-Wave Control Panel and MQTT Gateway
+After=network.target
+
+[Service]
+Type=simple
+User=__APP__
+Group=__APP__
+WorkingDirectory=__FINALPATH__/
+ExecStart=__FINALPATH__/zwave-js-ui-linux
+StandardOutput=append:/var/log/__APP__/__APP__.log
+StandardError=inherit
+
+# Sandboxing options to harden security
+# Depending on specificities of your service/app, you may need to tweak these
+# .. but this should be a good baseline
+# Details for these options: https://www.freedesktop.org/software/systemd/man/systemd.exec.html
+NoNewPrivileges=yes
+PrivateTmp=yes
+PrivateDevices=yes
+RestrictAddressFamilies=AF_UNIX AF_INET AF_INET6
+RestrictNamespaces=yes
+RestrictRealtime=yes
+DevicePolicy=closed
+ProtectSystem=full
+ProtectControlGroups=yes
+ProtectKernelModules=yes
+ProtectKernelTunables=yes
+LockPersonality=yes
+SystemCallFilter=~@clock @debug @module @mount @obsolete @reboot @setuid @swap
+
+# Denying access to capabilities that should not be relevant for webapps
+# Doc: https://man7.org/linux/man-pages/man7/capabilities.7.html
+CapabilityBoundingSet=~CAP_RAWIO CAP_MKNOD
+CapabilityBoundingSet=~CAP_AUDIT_CONTROL CAP_AUDIT_READ CAP_AUDIT_WRITE
+CapabilityBoundingSet=~CAP_SYS_BOOT CAP_SYS_TIME CAP_SYS_MODULE CAP_SYS_PACCT
+CapabilityBoundingSet=~CAP_LEASE CAP_LINUX_IMMUTABLE CAP_IPC_LOCK
+CapabilityBoundingSet=~CAP_BLOCK_SUSPEND CAP_WAKE_ALARM
+CapabilityBoundingSet=~CAP_SYS_TTY_CONFIG
+CapabilityBoundingSet=~CAP_MAC_ADMIN CAP_MAC_OVERRIDE
+CapabilityBoundingSet=~CAP_NET_ADMIN CAP_NET_BROADCAST CAP_NET_RAW
+CapabilityBoundingSet=~CAP_SYS_ADMIN CAP_SYS_PTRACE CAP_SYSLOG
+
+[Install]
+WantedBy=multi-user.target
diff --git a/doc/.gitkeep b/doc/.gitkeep
new file mode 100644
index 0000000..e69de29
diff --git a/doc/DESCRIPTION.md b/doc/DESCRIPTION.md
new file mode 100644
index 0000000..4179b38
--- /dev/null
+++ b/doc/DESCRIPTION.md
@@ -0,0 +1,11 @@
+**!! WORK IN PROGRESS !! - DO NOT INSTALL YET**
+
+### Features
+
+Integrate zwave-js-ui natively in Domoticz_ynh.
+
+**Zwave-JS-UI**, also known under previous name ZWaveJS2MQTT, is a replacement for Openzwave. It exposes Z-Wave devices to an MQTT broker in a fully configurable manner.
+
+To work correctly, this app require **domoticz** with **mqtt broker Mosquitto** installed. Please refer to [domoticz package for Yunohost](https://github.com/YunoHost-Apps/domoticz_ynh) for more information about how to set up domoticz and Mosquitto.
+
+This app may also be usable with [Home-Assistant package](https://github.com/YunoHost-Apps/homeassistant_ynh) but I never tested it.
\ No newline at end of file
diff --git a/doc/DESCRIPTION_fr.md b/doc/DESCRIPTION_fr.md
new file mode 100644
index 0000000..3358908
--- /dev/null
+++ b/doc/DESCRIPTION_fr.md
@@ -0,0 +1,12 @@
+
+**!! EN COURS DE CONSTRUCTION !! - NE PAS INSTALLER**
+
+### Fonctionnalités
+
+Intègre zwave-js-ui dans domoticz_ynh de façon native.
+
+**Zwave-JS-UI**, aussi connu sous le nom de ZWaveJS2MQTT, est un remplaçant pour Openzwave. Il permet d'exposer les terminaux Z-Wave à un broker  MQTT de façon complètement configurable.
+
+Pour fonctionner correctement, cette application nécessite d'avoir **domoticz** avec le **broker MQTT mosquitto** d'également installés. Veuillez vous reporter au [paquet domoticz pour Yunohost](https://github.com/YunoHost-Apps/domoticz_ynh) afin d'obtenir plus d'information sur comment le faire.
+
+Cette application fonctionne également peut-être avec [le paquet Home-Assistant](https://github.com/YunoHost-Apps/homeassistant_ynh) mais je ne l'ai jamais testée.
\ No newline at end of file
diff --git a/doc/DISCLAIMER.md b/doc/DISCLAIMER.md
new file mode 100644
index 0000000..b4d2fbe
--- /dev/null
+++ b/doc/DISCLAIMER.md
@@ -0,0 +1,6 @@
+
+
+**!! WORK IN PROGRESS !! - DO NOT INSTALL YET**
+
+For now, although the package is fully functional (install, remove, backup, restore...), it is not yet integrated with domoticz and mosquitto package, this means that all settings needs to be done manually from inside the app.
+
diff --git a/doc/DISCLAIMER_fr.md b/doc/DISCLAIMER_fr.md
new file mode 100644
index 0000000..ccf5bfd
--- /dev/null
+++ b/doc/DISCLAIMER_fr.md
@@ -0,0 +1,5 @@
+
+
+**!! EN COURS DE CONSTRUCTION !! - NE PAS INSTALLER**
+
+Pour l'instant, bien que le package fonctionne (installation, désinstallation, sauvegarde, restauration...), il n'est pas encore intégré avec domoticz et mosquitto, les paramétrages doivent être fait manuellement depuis l'application.
\ No newline at end of file
diff --git a/manifest.json b/manifest.json
new file mode 100644
index 0000000..d2c539f
--- /dev/null
+++ b/manifest.json
@@ -0,0 +1,53 @@
+{
+    "name": "Zwave-JS-UI",
+    "id": "zwave-js-ui",
+    "packaging_format": 1,
+    "description": {
+        "en": "Full featured Z-Wave Control Panel and MQTT Gateway integrated with domoticz",
+        "fr": "Panneau de controle Z-Wave et MQTT intégré avec Domoticz"
+    },
+    "version": "8.4.1~ynh1",
+    "url": "https://github.com/zwave-js/zwave-js-ui",
+    "upstream": {
+        "license": "MIT",
+        "website": "https://zwave-js.github.io/zwave-js-ui/#/",
+        "admindoc": "https://zwave-js.github.io/zwave-js-ui/#/",
+        "userdoc": "https://www.domoticz.com/wiki/Zwave-JS-UI",
+        "code": "https://github.com/zwave-js/zwave-js-ui"
+    },
+    "license": "MIT",
+    "maintainer": {
+        "name": "Krakinou",
+        "email": "misterl56@hotmail.com"
+    },
+    "requirements": {
+        "yunohost": ">= 11.0.0"
+    },
+    "multi_instance": false,
+    "services": [
+        "domoticz"
+    ],
+    "arguments": {
+        "install": [
+            {
+                "name": "domain",
+                "type": "domain"
+            },
+            {
+                "name": "path",
+                "type": "path",
+                "example": "/zwavejsui",
+                "default": "/zwavejsui"
+            },
+            {
+                "name": "is_public",
+                "type": "boolean",
+                "default": false,
+                "help": {
+                    "en": "If set public, anyone can access the app without login in yunohost, you activate password protected login from within the app",
+                    "fr": "Si publique, N'importe qui peut accéder à l'application sans se connecter à yunohost, vous pouvez cependant activer une connection par mot de passe depuis l'application" 
+                }
+            }
+        ]
+    }
+}
diff --git a/scripts/_common.sh b/scripts/_common.sh
new file mode 100644
index 0000000..a5815ee
--- /dev/null
+++ b/scripts/_common.sh
@@ -0,0 +1,19 @@
+#!/bin/bash
+
+#=================================================
+# COMMON VARIABLES
+#=================================================
+# dependencies used by the app (must be on a single line)
+#pkg_dependencies="deb1 deb2 $php_dependencies"
+
+#=================================================
+# PERSONAL HELPERS
+#=================================================
+
+#=================================================
+# EXPERIMENTAL HELPERS
+#=================================================
+
+#=================================================
+# FUTURE OFFICIAL HELPERS
+#=================================================
diff --git a/scripts/backup b/scripts/backup
new file mode 100755
index 0000000..fd26ce5
--- /dev/null
+++ b/scripts/backup
@@ -0,0 +1,83 @@
+#!/bin/bash
+
+#=================================================
+# GENERIC START
+#=================================================
+# IMPORT GENERIC HELPERS
+#=================================================
+
+# Keep this path for calling _common.sh inside the execution's context of backup and restore scripts
+source ../settings/scripts/_common.sh
+source /usr/share/yunohost/helpers
+
+#=================================================
+# MANAGE SCRIPT FAILURE
+#=================================================
+
+ynh_clean_setup () {
+	### Remove this function if there's nothing to clean before calling the remove script.
+	true
+}
+# Exit if an error occurs during the execution of the script
+ynh_abort_if_errors
+
+#=================================================
+# LOAD SETTINGS
+#=================================================
+ynh_print_info --message="Loading installation settings..."
+
+app=$YNH_APP_INSTANCE_NAME
+
+final_path=$(ynh_app_setting_get --app=$app --key=final_path)
+domain=$(ynh_app_setting_get --app=$app --key=domain)
+
+
+#=================================================
+# DECLARE DATA AND CONF FILES TO BACKUP
+#=================================================
+ynh_print_info --message="Declaring files to be backed up..."
+
+### N.B. : the following 'ynh_backup' calls are only a *declaration* of what needs
+### to be backuped and not an actual copy of any file. The actual backup that
+### creates and fill the archive with the files happens in the core after this
+### script is called. Hence ynh_backups calls takes basically 0 seconds to run.
+
+#=================================================
+# BACKUP THE APP MAIN DIR
+#=================================================
+
+ynh_backup --src_path="$final_path"
+
+#=================================================
+# BACKUP THE NGINX CONFIGURATION
+#=================================================
+
+ynh_backup --src_path="/etc/nginx/conf.d/$domain.d/$app.conf"
+
+#=================================================
+# BACKUP FAIL2BAN CONFIGURATION
+#=================================================
+
+#ynh_backup --src_path="/etc/fail2ban/jail.d/$app.conf"
+#ynh_backup --src_path="/etc/fail2ban/filter.d/$app.conf"
+
+#=================================================
+# SPECIFIC BACKUP
+#=================================================
+# BACKUP LOGROTATE
+#=================================================
+
+ynh_backup --src_path="/etc/logrotate.d/$app"
+
+#=================================================
+# BACKUP SYSTEMD
+#=================================================
+
+ynh_backup --src_path="/etc/systemd/system/$app.service"
+
+
+#=================================================
+# END OF SCRIPT
+#=================================================
+
+ynh_print_info --message="Backup script completed for $app. (YunoHost will then actually copy those files to the archive)."
diff --git a/scripts/change_url b/scripts/change_url
new file mode 100644
index 0000000..8a461b6
--- /dev/null
+++ b/scripts/change_url
@@ -0,0 +1,135 @@
+#!/bin/bash
+
+#=================================================
+# GENERIC STARTING
+#=================================================
+# IMPORT GENERIC HELPERS
+#=================================================
+
+source _common.sh
+source /usr/share/yunohost/helpers
+
+#=================================================
+# RETRIEVE ARGUMENTS
+#=================================================
+
+old_domain=$YNH_APP_OLD_DOMAIN
+old_path=$YNH_APP_OLD_PATH
+
+new_domain=$YNH_APP_NEW_DOMAIN
+new_path=$YNH_APP_NEW_PATH
+
+app=$YNH_APP_INSTANCE_NAME
+
+#=================================================
+# LOAD SETTINGS
+#=================================================
+ynh_script_progression --message="Loading installation settings..." --weight=1
+
+# Needed for helper "ynh_add_nginx_config"
+final_path=$(ynh_app_setting_get --app=$app --key=final_path)
+port=$(ynh_app_setting_get --app=$app --key=port)
+
+# Add settings here as needed by your application
+#db_name=$(ynh_app_setting_get --app=$app --key=db_name)
+#db_user=$db_name
+#db_pwd=$(ynh_app_setting_get --app=$app --key=db_pwd)
+
+#=================================================
+# BACKUP BEFORE CHANGE URL THEN ACTIVE TRAP
+#=================================================
+ynh_script_progression --message="Backing up the app before changing its URL (may take a while)..." --weight=1
+
+# Backup the current version of the app
+ynh_backup_before_upgrade
+ynh_clean_setup () {
+	# Remove the new domain config file, the remove script won't do it as it doesn't know yet its location.
+	ynh_secure_remove --file="/etc/nginx/conf.d/$new_domain.d/$app.conf"
+
+	# Restore it if the upgrade fails
+	ynh_restore_upgradebackup
+}
+# Exit if an error occurs during the execution of the script
+ynh_abort_if_errors
+
+#=================================================
+# CHECK WHICH PARTS SHOULD BE CHANGED
+#=================================================
+
+change_domain=0
+if [ "$old_domain" != "$new_domain" ]
+then
+	change_domain=1
+fi
+
+change_path=0
+if [ "$old_path" != "$new_path" ]
+then
+	change_path=1
+fi
+
+#=================================================
+# STANDARD MODIFICATIONS
+#=================================================
+# STOP SYSTEMD SERVICE
+#=================================================
+ynh_script_progression --message="Stopping a systemd service..." --weight=1
+
+ynh_systemd_action --service_name=$app --action="stop" --log_path="/var/log/$app/$app.log"
+
+#=================================================
+# MODIFY URL IN NGINX CONF
+#=================================================
+ynh_script_progression --message="Updating NGINX web server configuration..." --weight=1
+
+nginx_conf_path=/etc/nginx/conf.d/$old_domain.d/$app.conf
+
+# Change the path in the NGINX config file
+if [ $change_path -eq 1 ]
+then
+	# Make a backup of the original NGINX config file if modified
+	ynh_backup_if_checksum_is_different --file="$nginx_conf_path"
+	# Set global variables for NGINX helper
+	domain="$old_domain"
+	path_url="$new_path"
+	# Create a dedicated NGINX config
+	ynh_add_nginx_config
+fi
+
+# Change the domain for NGINX
+if [ $change_domain -eq 1 ]
+then
+	# Delete file checksum for the old conf file location
+	ynh_delete_file_checksum --file="$nginx_conf_path"
+	mv $nginx_conf_path /etc/nginx/conf.d/$new_domain.d/$app.conf
+	# Store file checksum for the new config file location
+	ynh_store_file_checksum --file="/etc/nginx/conf.d/$new_domain.d/$app.conf"
+fi
+
+#=================================================
+# SPECIFIC MODIFICATIONS
+#=================================================
+# ...
+#=================================================
+
+#=================================================
+# GENERIC FINALISATION
+#=================================================
+# START SYSTEMD SERVICE
+#=================================================
+ynh_script_progression --message="Starting a systemd service..." --weight=1
+
+ynh_systemd_action --service_name=$app --action="start" --log_path="/var/log/$app/$app.log"
+
+#=================================================
+# RELOAD NGINX
+#=================================================
+ynh_script_progression --message="Reloading NGINX web server..." --weight=1
+
+ynh_systemd_action --service_name=nginx --action=reload
+
+#=================================================
+# END OF SCRIPT
+#=================================================
+
+ynh_script_progression --message="Change of URL completed for $app" --last
diff --git a/scripts/install b/scripts/install
new file mode 100755
index 0000000..18b7c14
--- /dev/null
+++ b/scripts/install
@@ -0,0 +1,230 @@
+#!/bin/bash
+
+#=================================================
+# GENERIC START
+#=================================================
+# IMPORT GENERIC HELPERS
+#=================================================
+
+source _common.sh
+source /usr/share/yunohost/helpers
+
+#=================================================
+# MANAGE SCRIPT FAILURE
+#=================================================
+
+ynh_clean_setup () {
+	### Remove this function if there's nothing to clean before calling the remove script.
+	true
+}
+# Exit if an error occurs during the execution of the script
+ynh_abort_if_errors
+
+#=================================================
+# RETRIEVE ARGUMENTS FROM THE MANIFEST
+#=================================================
+
+domain=$YNH_APP_ARG_DOMAIN
+path_url=$YNH_APP_ARG_PATH
+is_public=$YNH_APP_ARG_IS_PUBLIC
+app=$YNH_APP_INSTANCE_NAME
+
+#=================================================
+# CHECK IF THE APP CAN BE INSTALLED WITH THESE ARGS
+#=================================================
+ynh_script_progression --message="Validating installation parameters..." --weight=1
+
+### If the app uses NGINX as web server (written in HTML/PHP in most cases), the final path should be "/var/www/$app".
+### If the app provides an internal web server (or uses another application server such as uWSGI), the final path should be "/opt/yunohost/$app"
+##TO BE CHECKED??
+final_path=/opt/yunohost/$app
+test ! -e "$final_path" || ynh_die --message="This path already contains a folder"
+
+# Register (book) web path
+ynh_webpath_register --app=$app --domain=$domain --path_url=$path_url
+
+#=================================================
+# STORE SETTINGS FROM MANIFEST
+#=================================================
+ynh_script_progression --message="Storing installation settings..." --weight=1
+
+ynh_app_setting_set --app=$app --key=domain --value=$domain
+ynh_app_setting_set --app=$app --key=path --value=$path_url
+
+#=================================================
+# STANDARD MODIFICATIONS
+#=================================================
+# FIND AND OPEN A PORT
+#=================================================
+ynh_script_progression --message="Finding an available port..." --weight=1
+
+# Find an available port
+port=$(ynh_find_port --port=8091)
+ynh_app_setting_set --app=$app --key=port --value=$port
+
+#=================================================
+# CREATE DEDICATED USER
+#=================================================
+ynh_script_progression --message="Configuring system user..." --weight=1
+
+# Create a system user
+ynh_system_user_create --username=$app --home_dir="$final_path"
+
+#=================================================
+# DOWNLOAD, CHECK AND UNPACK SOURCE
+#=================================================
+ynh_script_progression --message="Setting up source files..." --weight=15
+
+ynh_app_setting_set --app=$app --key=final_path --value=$final_path
+# Download, check integrity, uncompress and patch the source from app.src
+ynh_setup_source --dest_dir="$final_path"
+
+chmod 750 "$final_path"
+chmod -R o-rwx "$final_path"
+chown -R $app: "$final_path"
+
+#=================================================
+# NGINX CONFIGURATION
+#=================================================
+ynh_script_progression --message="Configuring NGINX web server..." --weight=5
+
+# Create a dedicated NGINX config
+ynh_add_nginx_config
+
+#=================================================
+# SPECIFIC SETUP
+#=================================================
+# ...
+#=================================================
+
+
+#=================================================
+# ADD A CONFIGURATION
+#=================================================
+#ynh_script_progression --message="Adding a configuration file..." --weight=1
+
+### You can add specific configuration files.
+###
+### Typically, put your template conf file in ../conf/your_config_file
+### The template may contain strings such as __FOO__ or __FOO_BAR__,
+### which will automatically be replaced by the values of $foo and $foo_bar
+###
+### ynh_add_config will also keep track of the config file's checksum,
+### which later during upgrade may allow to automatically backup the config file
+### if it's found that the file was manually modified
+###
+### Check the documentation of `ynh_add_config` for more info.
+
+######ynh_add_config --template="some_config_file" --destination="$final_path/some_config_file"
+
+# FIXME: this should be handled by the core in the future
+# You may need to use chmod 600 instead of 400,
+# for example if the app is expected to be able to modify its own config
+#######chmod 400 "$final_path/some_config_file"
+#######chown $app:$app "$final_path/some_config_file"
+
+### For more complex cases where you want to replace stuff using regexes,
+### you shoud rely on ynh_replace_string (which is basically a wrapper for sed)
+### When doing so, you also need to manually call ynh_store_file_checksum
+###
+### ynh_replace_string --match_string="match_string" --replace_string="replace_string" --target_file="$final_path/some_config_file"
+### ynh_store_file_checksum --file="$final_path/some_config_file"
+
+#=================================================
+# SETUP SYSTEMD
+#=================================================
+ynh_script_progression --message="Configuring a systemd service..." --weight=5
+
+# Create a dedicated systemd config
+ynh_add_systemd_config
+
+#=================================================
+# SETUP APPLICATION WITH CURL
+#=================================================
+
+### Use these lines only if the app installation needs to be finalized through
+### web forms. We generally don't want to ask the final user,
+### so we're going to use curl to automatically fill the fields and submit the
+### forms.
+
+# Set the app as temporarily public for curl call
+#####ynh_script_progression --message="Configuring SSOwat..." --weight=1
+# Making the app public for curl
+#####ynh_permission_update --permission="main" --add="visitors"
+
+# Installation with curl
+#####ynh_script_progression --message="Finalizing installation..." --weight=1
+#####ynh_local_curl "/INSTALL_PATH" "key1=value1" "key2=value2" "key3=value3"
+
+# Remove the public access
+####ynh_permission_update --permission="main" --remove="visitors"
+
+#=================================================
+# GENERIC FINALIZATION
+#=================================================
+# SETUP LOGROTATE
+#=================================================
+ynh_script_progression --message="Configuring log rotation..." --weight=1
+
+# Use logrotate to manage application logfile(s)
+ynh_use_logrotate --logfile="/var/log/$app/$app.log"
+
+#=================================================
+# INTEGRATE SERVICE IN YUNOHOST
+#=================================================
+ynh_script_progression --message="Integrating service in YunoHost..." --weight=1
+
+yunohost service add $app --description="Zwave integration in domoticz" --log="/var/log/$app/$app.log"
+
+#=================================================
+# START SYSTEMD SERVICE
+#=================================================
+ynh_script_progression --message="Starting a systemd service..." --weight=1
+
+# Start a systemd service
+ynh_systemd_action --service_name=$app --action="start" --log_path="/var/log/$app/$app.log"
+
+#=================================================
+# SETUP FAIL2BAN
+#=================================================
+#ynh_script_progression --message="Configuring Fail2Ban..." --weight=1
+
+# Create a dedicated Fail2Ban config
+#ynh_add_fail2ban_config --logpath="/var/log/nginx/${domain}-error.log" --failregex="Regex to match into the log for a failed login"
+
+#=================================================
+# SETUP SSOWAT
+#=================================================
+ynh_script_progression --message="Configuring permissions..." --weight=11
+
+# Make app public if necessary
+if [ $is_public -eq 1 ]
+then
+	# Everyone can access the app.
+	# The "main" permission is automatically created before the install script.
+	ynh_permission_update --permission="main" --add="visitors"
+fi
+
+### N.B. : the following extra permissions only make sense if your app
+### does have for example an admin interface or an API.
+
+# Only the admin can access the admin panel of the app (if the app has an admin panel)
+#ynh_permission_create --permission="admin" --url="/admin" --allowed=$admin
+
+# Everyone can access the API part
+# We don't want to display the tile in the SSO so we put --show_tile="false"
+# And we don't want the YunoHost admin to be able to remove visitors group to this permission, so we put --protected="true"
+#ynh_permission_create --permission="api" --url="/api" --allowed="visitors" --show_tile="false" --protected="true"
+
+#=================================================
+# RELOAD NGINX
+#=================================================
+ynh_script_progression --message="Reloading NGINX web server..." --weight=1
+
+ynh_systemd_action --service_name=nginx --action=reload
+
+#=================================================
+# END OF SCRIPT
+#=================================================
+
+ynh_script_progression --message="Installation of $app completed" --last
diff --git a/scripts/remove b/scripts/remove
new file mode 100755
index 0000000..ca21be7
--- /dev/null
+++ b/scripts/remove
@@ -0,0 +1,106 @@
+#!/bin/bash
+
+#=================================================
+# GENERIC START
+#=================================================
+# IMPORT GENERIC HELPERS
+#=================================================
+
+source _common.sh
+source /usr/share/yunohost/helpers
+
+#=================================================
+# LOAD SETTINGS
+#=================================================
+ynh_script_progression --message="Loading installation settings..." --weight=1
+
+app=$YNH_APP_INSTANCE_NAME
+
+domain=$(ynh_app_setting_get --app=$app --key=domain)
+port=$(ynh_app_setting_get --app=$app --key=port)
+final_path=$(ynh_app_setting_get --app=$app --key=final_path)
+
+#=================================================
+# STANDARD REMOVE
+#=================================================
+# REMOVE SERVICE INTEGRATION IN YUNOHOST
+#=================================================
+
+# Remove the service from the list of services known by YunoHost (added from `yunohost service add`)
+if ynh_exec_warn_less yunohost service status $app >/dev/null
+then
+	ynh_script_progression --message="Removing $app service integration..." --weight=1
+	yunohost service remove $app
+fi
+
+#=================================================
+# STOP AND REMOVE SERVICE
+#=================================================
+ynh_script_progression --message="Stopping and removing the systemd service..." --weight=1
+
+# Remove the dedicated systemd config
+ynh_remove_systemd_config
+
+#=================================================
+# REMOVE LOGROTATE CONFIGURATION
+#=================================================
+ynh_script_progression --message="Removing logrotate configuration..." --weight=1
+
+# Remove the app-specific logrotate config
+ynh_remove_logrotate
+
+#=================================================
+# REMOVE APP MAIN DIR
+#=================================================
+ynh_script_progression --message="Removing app main directory..." --weight=1
+
+# Remove the app directory securely
+ynh_secure_remove --file="$final_path"
+
+#=================================================
+# REMOVE NGINX CONFIGURATION
+#=================================================
+ynh_script_progression --message="Removing NGINX web server configuration..." --weight=1
+
+# Remove the dedicated NGINX config
+ynh_remove_nginx_config
+
+#=================================================
+# REMOVE FAIL2BAN CONFIGURATION
+#=================================================
+#ynh_script_progression --message="Removing Fail2Ban configuration..." --weight=1
+
+# Remove the dedicated Fail2Ban config
+#ynh_remove_fail2ban_config
+
+#=================================================
+# SPECIFIC REMOVE
+#=================================================
+# REMOVE VARIOUS FILES
+#=================================================
+ynh_script_progression --message="Removing various files..." --weight=1
+
+# Remove a cron file
+#ynh_secure_remove --file="/etc/cron.d/$app"
+
+# Remove a directory securely
+#ynh_secure_remove --file="/etc/$app"
+
+# Remove the log files
+ynh_secure_remove --file="/var/log/$app"
+
+#=================================================
+# GENERIC FINALIZATION
+#=================================================
+# REMOVE DEDICATED USER
+#=================================================
+ynh_script_progression --message="Removing the dedicated system user..." --weight=7
+
+# Delete a system user
+ynh_system_user_delete --username=$app
+
+#=================================================
+# END OF SCRIPT
+#=================================================
+
+ynh_script_progression --message="Removal of $app completed" --last
diff --git a/scripts/restore b/scripts/restore
new file mode 100755
index 0000000..2e29b62
--- /dev/null
+++ b/scripts/restore
@@ -0,0 +1,145 @@
+#!/bin/bash
+
+#=================================================
+# GENERIC START
+#=================================================
+# IMPORT GENERIC HELPERS
+#=================================================
+
+# Keep this path for calling _common.sh inside the execution's context of backup and restore scripts
+source ../settings/scripts/_common.sh
+source /usr/share/yunohost/helpers
+
+#=================================================
+# MANAGE SCRIPT FAILURE
+#=================================================
+
+ynh_clean_setup () {
+	#### Remove this function if there's nothing to clean before calling the remove script.
+	true
+}
+# Exit if an error occurs during the execution of the script
+ynh_abort_if_errors
+
+#=================================================
+# LOAD SETTINGS
+#=================================================
+ynh_script_progression --message="Loading installation settings..." --weight=1
+
+app=$YNH_APP_INSTANCE_NAME
+
+domain=$(ynh_app_setting_get --app=$app --key=domain)
+path_url=$(ynh_app_setting_get --app=$app --key=path)
+final_path=$(ynh_app_setting_get --app=$app --key=final_path)
+
+#=================================================
+# CHECK IF THE APP CAN BE RESTORED
+#=================================================
+ynh_script_progression --message="Validating restoration parameters..." --weight=1
+
+test ! -d $final_path \
+	|| ynh_die --message="There is already a directory: $final_path "
+
+#=================================================
+# STANDARD RESTORATION STEPS
+#=================================================
+# RECREATE THE DEDICATED USER
+#=================================================
+ynh_script_progression --message="Recreating the dedicated system user..." --weight=1
+
+# Create the dedicated user (if not existing)
+ynh_system_user_create --username=$app --home_dir="$final_path"
+
+#=================================================
+# RESTORE THE APP MAIN DIR
+#=================================================
+ynh_script_progression --message="Restoring the app main directory..." --weight=1
+
+ynh_restore_file --origin_path="$final_path"
+
+# FIXME: this should be managed by the core in the future
+# Here, as a packager, you may have to tweak the ownerhsip/permissions
+# such that the appropriate users (e.g. maybe www-data) can access
+# files in some cases.
+# But FOR THE LOVE OF GOD, do not allow r/x for "others" on the entire folder -
+# this will be treated as a security issue.
+chmod 750 "$final_path"
+chmod -R o-rwx "$final_path"
+chown -R $app: "$final_path"
+
+#=================================================
+# RESTORE FAIL2BAN CONFIGURATION
+#=================================================
+#ynh_script_progression --message="Restoring the Fail2Ban configuration..." --weight=1
+
+#ynh_restore_file --origin_path="/etc/fail2ban/jail.d/$app.conf"
+#ynh_restore_file --origin_path="/etc/fail2ban/filter.d/$app.conf"
+#ynh_systemd_action --action=restart --service_name=fail2ban
+
+#=================================================
+# SPECIFIC RESTORATION
+#=================================================
+# REINSTALL DEPENDENCIES
+#=================================================
+#ynh_script_progression --message="Reinstalling dependencies..." --weight=1
+
+# Define and install dependencies
+#ynh_install_app_dependencies $pkg_dependencies
+
+#=================================================
+# RESTORE THE NGINX CONFIGURATION
+#=================================================
+ynh_script_progression --message="Restoring the NGINX web server configuration..." --weight=1
+
+ynh_restore_file --origin_path="/etc/nginx/conf.d/$domain.d/$app.conf"
+
+#=================================================
+# RESTORE SYSTEMD
+#=================================================
+ynh_script_progression --message="Restoring the systemd configuration..." --weight=1
+
+ynh_restore_file --origin_path="/etc/systemd/system/$app.service"
+systemctl enable $app.service --quiet
+
+#=================================================
+# RESTORE THE LOGROTATE CONFIGURATION
+#=================================================
+ynh_script_progression --message="Restoring the logrotate configuration..." --weight=1
+
+ynh_restore_file --origin_path="/etc/logrotate.d/$app"
+
+#=================================================
+# RESTORE THE LOG FILE DIRECTORY
+#=================================================
+mkdir -p /var/log/$app
+chown -R $app:$app /var/log/$app
+
+
+#=================================================
+# INTEGRATE SERVICE IN YUNOHOST
+#=================================================
+ynh_script_progression --message="Integrating service in YunoHost..." --weight=1
+
+yunohost service add $app --description="Zwave integration in domoticz" --log="/var/log/$app/$app.log"
+
+#=================================================
+# START SYSTEMD SERVICE
+#=================================================
+ynh_script_progression --message="Starting a systemd service..." --weight=1
+
+ynh_systemd_action --service_name=$app --action="start" --log_path="/var/log/$app/$app.log"
+
+#=================================================
+# GENERIC FINALIZATION
+#=================================================
+# RELOAD NGINX AND PHP-FPM
+#=================================================
+ynh_script_progression --message="Reloading NGINX web server..." --weight=1
+
+ynh_systemd_action --service_name=nginx --action=reload
+
+#=================================================
+# END OF SCRIPT
+#=================================================
+
+ynh_script_progression --message="Restoration completed for $app" --last
diff --git a/scripts/upgrade b/scripts/upgrade
new file mode 100644
index 0000000..f19457d
--- /dev/null
+++ b/scripts/upgrade
@@ -0,0 +1,187 @@
+#!/bin/bash
+
+#=================================================
+# GENERIC START
+#=================================================
+# IMPORT GENERIC HELPERS
+#=================================================
+
+source _common.sh
+source /usr/share/yunohost/helpers
+
+#=================================================
+# LOAD SETTINGS
+#=================================================
+ynh_script_progression --message="Loading installation settings..." --weight=1
+
+app=$YNH_APP_INSTANCE_NAME
+
+domain=$(ynh_app_setting_get --app=$app --key=domain)
+path_url=$(ynh_app_setting_get --app=$app --key=path)
+final_path=$(ynh_app_setting_get --app=$app --key=final_path)
+port=$(ynh_app_setting_get --app=$app --key=port)
+
+#=================================================
+# CHECK VERSION
+#=================================================
+
+upgrade_type=$(ynh_check_app_version_changed)
+
+#=================================================
+# BACKUP BEFORE UPGRADE THEN ACTIVE TRAP
+#=================================================
+ynh_script_progression --message="Backing up the app before upgrading (may take a while)..." --weight=1
+
+# Backup the current version of the app
+ynh_backup_before_upgrade
+ynh_clean_setup () {
+	# Restore it if the upgrade fails
+	ynh_restore_upgradebackup
+}
+# Exit if an error occurs during the execution of the script
+ynh_abort_if_errors
+
+#=================================================
+# STANDARD UPGRADE STEPS
+#=================================================
+# STOP SYSTEMD SERVICE
+#=================================================
+ynh_script_progression --message="Stopping a systemd service..." --weight=1
+
+ynh_systemd_action --service_name=$app --action="stop" --log_path="/var/log/$app/$app.log"
+
+#=================================================
+# ENSURE DOWNWARD COMPATIBILITY
+#=================================================
+#ynh_script_progression --message="Ensuring downward compatibility..." --weight=1
+
+#
+
+#=================================================
+# CREATE DEDICATED USER
+#=================================================
+ynh_script_progression --message="Making sure dedicated system user exists..." --weight=1
+
+# Create a dedicated user (if not existing)
+ynh_system_user_create --username=$app --home_dir="$final_path"
+
+#=================================================
+# DOWNLOAD, CHECK AND UNPACK SOURCE
+#=================================================
+
+if [ "$upgrade_type" == "UPGRADE_APP" ]
+then
+	ynh_script_progression --message="Upgrading source files..." --weight=1
+
+	# Download, check integrity, uncompress and patch the source from app.src
+	ynh_setup_source --dest_dir="$final_path"
+fi
+
+# FIXME: this should be managed by the core in the future
+# Here, as a packager, you may have to tweak the ownerhsip/permissions
+# such that the appropriate users (e.g. maybe www-data) can access
+# files in some cases.
+# But FOR THE LOVE OF GOD, do not allow r/x for "others" on the entire folder -
+# this will be treated as a security issue.
+chmod 750 "$final_path"
+chmod -R o-rwx "$final_path"
+chown -R $app: "$final_path"
+
+#=================================================
+# UPGRADE DEPENDENCIES
+#=================================================
+#ynh_script_progression --message="Upgrading dependencies..." --weight=1
+
+#ynh_install_app_dependencies $pkg_dependencies
+
+#=================================================
+# NGINX CONFIGURATION
+#=================================================
+ynh_script_progression --message="Upgrading NGINX web server configuration..." --weight=1
+
+# Create a dedicated NGINX config
+ynh_add_nginx_config
+
+#=================================================
+# SPECIFIC UPGRADE
+#=================================================
+# ...
+#=================================================
+
+#=================================================
+# UPDATE A CONFIG FILE
+#=================================================
+#ynh_script_progression --message="Updating a configuration file..." --weight=1
+
+### Same as during install
+###
+### The file will automatically be backed-up if it's found to be manually modified (because
+### ynh_add_config keeps track of the file's checksum)
+
+#ynh_add_config --template="some_config_file" --destination="$final_path/some_config_file"
+
+# FIXME: this should be handled by the core in the future
+# You may need to use chmod 600 instead of 400,
+# for example if the app is expected to be able to modify its own config
+#chmod 400 "$final_path/some_config_file"
+#chown $app:$app "$final_path/some_config_file"
+
+### For more complex cases where you want to replace stuff using regexes,
+### you shoud rely on ynh_replace_string (which is basically a wrapper for sed)
+### When doing so, you also need to manually call ynh_store_file_checksum
+###
+### ynh_replace_string --match_string="match_string" --replace_string="replace_string" --target_file="$final_path/some_config_file"
+### ynh_store_file_checksum --file="$final_path/some_config_file"
+
+#=================================================
+# SETUP SYSTEMD
+#=================================================
+ynh_script_progression --message="Upgrading systemd configuration..." --weight=1
+
+# Create a dedicated systemd config
+ynh_add_systemd_config
+
+#=================================================
+# GENERIC FINALIZATION
+#=================================================
+# SETUP LOGROTATE
+#=================================================
+ynh_script_progression --message="Upgrading logrotate configuration..." --weight=1
+
+# Use logrotate to manage app-specific logfile(s)
+ynh_use_logrotate --logfile="/var/log/$app/$app.log" --non-append
+
+#=================================================
+# INTEGRATE SERVICE IN YUNOHOST
+#=================================================
+ynh_script_progression --message="Integrating service in YunoHost..." --weight=1
+
+yunohost service add $app --description="Zwave integration in domoticz" --log="/var/log/$app/$app.log"
+
+#=================================================
+# START SYSTEMD SERVICE
+#=================================================
+ynh_script_progression --message="Starting a systemd service..." --weight=1
+
+ynh_systemd_action --service_name=$app --action="start" --log_path="/var/log/$app/$app.log"
+
+#=================================================
+# UPGRADE FAIL2BAN
+#=================================================
+#ynh_script_progression --message="Reconfiguring Fail2Ban..." --weight=1
+
+# Create a dedicated Fail2Ban config
+#ynh_add_fail2ban_config --logpath="/var/log/nginx/${domain}-error.log" --failregex="Regex to match into the log for a failed login"
+
+#=================================================
+# RELOAD NGINX
+#=================================================
+ynh_script_progression --message="Reloading NGINX web server..." --weight=1
+
+ynh_systemd_action --service_name=nginx --action=reload
+
+#=================================================
+# END OF SCRIPT
+#=================================================
+
+ynh_script_progression --message="Upgrade of $app completed" --last
diff --git a/sources/extra_files/app/.gitignore b/sources/extra_files/app/.gitignore
new file mode 100644
index 0000000..783a4ae
--- /dev/null
+++ b/sources/extra_files/app/.gitignore
@@ -0,0 +1,2 @@
+*~
+*.sw[op]
diff --git a/sources/patches/.gitignore b/sources/patches/.gitignore
new file mode 100644
index 0000000..783a4ae
--- /dev/null
+++ b/sources/patches/.gitignore
@@ -0,0 +1,2 @@
+*~
+*.sw[op]