mirror of
https://github.com/YunoHost/doc.git
synced 2024-09-03 20:06:26 +02:00
44 lines
2.6 KiB
Markdown
44 lines
2.6 KiB
Markdown
|
#Installation guide
|
||
|
|
|
||
|
|
You have two ways to install YunoHost:
|
||
|
|
|
||
|
|
1. From a USB key or a CD-ROM (below guide)
|
||
|
|
2. [Through the install script on an existing Debian system](/install_on_debian)
|
||
|
|
|
||
|
|
### Pre-requisite
|
||
|
|
|
||
|
|
* An x86-[compatible hardware](/compatible_hardware) dedicated to YunoHost. Be careful to avoid having any unsaved data on it before installation.
|
||
|
|
* Another computer to read this guide and to access your server.
|
||
|
|
* A [reasonable ISP](/isp), with good upstream bandwidth, unlimited download/upload, and tolerant of self-hosting.
|
||
|
|
* A USB key (via [Unetbootin](http://unetbootin.net/more-infos-and-get-it/)) or a CD burned with the latest YunoHost ISO: http://build.yunohost.org
|
||
|
|
|
||
|
|
### Boot on CD-ROM drive or USB key
|
||
|
|
|
||
|
|
Boot up your server with the USB key or a CD-ROM inserted, and select it as bootable device by pressing one of the following keys (hardware specific): ```<ESC>```, ```<F8>```, ```<F10>```, ```<F11>```, ```<F12>``` ou ```<SUPPR>```
|
||
|
|
|
||
|
|
|
||
|
|
### Installation process
|
||
|
|
Connect the server to your Ethernet router.
|
||
|
|
|
||
|
|
Select "Graphical Install" and follow the instructions. You get to choose the system language and keyboard layout, then you must confirm the full formating of the hard drive.
|
||
|
|
|
||
|
|
The installation process will run on itself, automatically downloading the required packages.
|
||
|
|
|
||
|
|
If this step is not successful, you probably have a connection problem. Check that your Internet connection is working.
|
||
|
|
|
||
|
|
### Post Installation
|
||
|
|
|
||
|
|
Your hardware should automatically reboot after installation. At the end of the reboot, your freshly installed YunoHost system should display the IP address of your server and a proposal for post-installation: proceed to post-installation.
|
||
|
|
|
||
|
|
You can then either:
|
||
|
|
* Login to http://xxxx (xxxx is your IP address) from another machine and follow the instructions post installation.
|
||
|
|
* Run the post-installation commandline by typing the enter key on your server.
|
||
|
|
|
||
|
|
Two parameters will be required:
|
||
|
|
|
||
|
|
1. Domain Name: You must choose a domain name that points to the IP address of your YunoHost instance. If you choose a domain name ending with .nohost.me or .noho.st, the DNS configuration step is automatically done and you'll only have to wait 3 minutes at the end of the post-installation. If you opt for another domain name, you must previously have purchased and configured it to point to your IP address.
|
||
|
|
|
||
|
|
2. Administrator Password: This is the password that will allow you to manage your YunoHost instance, **choose it carefully**, it must not be disclosed or be guessable, otherwise you can lose your system.
|
||
|
|
|
||
|
|
The post-install process will then be automatic and you will have access to the administration interface via **https://votre-domaine.org/yunohost/admin**
|