diff --git a/install.md b/install.md deleted file mode 100644 index 21057891..00000000 --- a/install.md +++ /dev/null @@ -1,43 +0,0 @@ -#Installation guide - -You have two ways to install YunoHost: - -1. From a USB key or a CD-ROM (below guide) -2. [Through the install script on an existing Debian system](/install_on_debian) - -### Pre-requisite - -* An x86-[compatible hardware](/compatible_hardware) dedicated to YunoHost. Be careful to avoid having any unsaved data on it before installation. -* Another computer to read this guide and to access your server. -* A [reasonable ISP](/isp), with good upstream bandwidth, unlimited download/upload, and tolerant of self-hosting. -* A USB key (via [Unetbootin](http://unetbootin.net/more-infos-and-get-it/)) or a CD burned with the latest YunoHost ISO: http://build.yunohost.org - -### Boot on CD-ROM drive or USB key - -Boot up your server with the USB key or a CD-ROM inserted, and select it as bootable device by pressing one of the following keys (hardware specific): ``````, ``````, ``````, ``````, `````` ou `````` - - -### Installation process -Connect the server to your Ethernet router. - -Select "Graphical Install" and follow the instructions. You get to choose the system language and keyboard layout, then you must confirm the full formating of the hard drive. - -The installation process will run on itself, automatically downloading the required packages. - -If this step is not successful, you probably have a connection problem. Check that your Internet connection is working. - -### Post Installation - -Your hardware should automatically reboot after installation. At the end of the reboot, your freshly installed YunoHost system should display the IP address of your server and a proposal for post-installation: proceed to post-installation. - -You can then either: -* Login to http://xxxx (xxxx is your IP address) from another machine and follow the instructions post installation. -* Run the post-installation commandline by typing the enter key on your server. - -Two parameters will be required: - -1. Domain Name: You must choose a domain name that points to the IP address of your YunoHost instance. If you choose a domain name ending with .nohost.me or .noho.st, the DNS configuration step is automatically done and you'll only have to wait 3 minutes at the end of the post-installation. If you opt for another domain name, you must previously have purchased and configured it to point to your IP address. - -2. Administrator Password: This is the password that will allow you to manage your YunoHost instance, **choose it carefully**, it must not be disclosed or be guessable, otherwise you can lose your system. - -The post-install process will then be automatic and you will have access to the administration interface via **https://votre-domaine.org/yunohost/admin** diff --git a/install_fr.md b/install_fr.md deleted file mode 100644 index 57b9cca5..00000000 --- a/install_fr.md +++ /dev/null @@ -1,46 +0,0 @@ -#Guide d'installation - -Vous disposez de deux moyens pour installer YunoHost: - -1. Installation via CD-ROM ou USB (guide ci-dessous) -2. [Installation sur Debian](/install_on_debian_fr) - -### Prérequis - -* Une [machine compatible](/compatible_hardware_fr) qui sera dédiée à YunoHost. Vérifiez donc de ne plus avoir de données importantes dessus. -* Une autre machine pour consulter ce guide et accéder à votre serveur. -* Une [connexion Internet correcte](/isp_fr), un débit montant raisonnable, et un fournisseur d’accès tolérant l'auto-hébergement. -* Avoir téléchargé l’image iso de YunoHost en [32bit](http://build.yunohost.org/yunohostv2-beta4-i386.iso) ou [64bit](http://build.yunohost.org/yunohostv2-beta4-amd64.iso) (prenez 32bit dans le doute) -* Avoir gravé l’image iso sur un CD ou copié le contenu sur une clé USB (via [Unetbootin](http://unetbootin.net/more-infos-and-get-it/)) - -### Démarrer sur le CD-ROM/la clé USB - -Démarrez votre machine en ayant préalablement inséré votre CD-ROM YunoHost ou votre clé USB, et choisissez-le comme prériphérique de démarrage, généralement via les touches ``````, ``````, ``````, ``````, `````` ou `````` - - -### Déroulement de l'installation - -Branchez la machine en **ethernet** sur votre routeur. - -Sélectionnez «**Graphical Install**», puis suivez les instructions. Vous aurez à choisir la langue du système ainsi que l’agencement du clavier, puis vous devrez confirmer le formatage **complet** du disque dur. - -L'installation se déroulera ensuite toute seule, en téléchargeant automatiquement les paquets requis. - -Si cette étape ne se déroule pas correctement, vous avez probablement un problème de connexion. Vérifiez alors que votre connexion Internet fonctionne. - - -### Post-installation - -Votre machine devrait redémarrer automatiquement après l'installation. À la fin du démarrage de votre nouveau système YunoHost, l'**adresse IP** de votre serveur devrait s'afficher, ainsi qu'une proposition de post-installation (en anglais «**proceed to post-installation ?**»). - -Vous pouvez alors soit: -* vous connecter sur http://x.x.x.x (**x.x.x.x** correspondant à votre **adresse IP**) depuis une autre machine et suivre les instructions de post-installation. -* exécuter la post-installation en ligne de commande en tapant sur la touche entrée sur votre serveur. - -Deux paramètres vous seront demandés: - -1. **Nom de domaine**: Vous devez choisir un nom de domaine qui pointera vers l'adresse IP de votre instance YunoHost. Si vous choisissez un nom de domaine terminant par **.nohost.me** ou **.noho.st**, l'étape de configuration des DNS se fera automatiquement et vous n'aurez qu'à attendre 3 minutes à la fin de la post-installation. Si vous optez pour un autre nom de domaine, vous devrez l’avoir préalablement acheté et [configuré](/dns_fr) pour qu'il pointe vers votre **adresse IP**. - -2. **Mot de passe administrateur**: C’est le mot de passe qui vous permettra d’administrer votre instance YunoHost, **choisissez-le avec attention**, il ne doit pas être divulgué ni être devinable, sinon vous pourrez perdre votre système. - -La post-install se déroulera ensuite automatiquement et vous pourrez accéder à l'interface d'administration via **https://votre-domaine.org/yunohost/admin**