diff --git a/install_iso.md b/install_iso.md
index 21057891..bb16fde4 100644
--- a/install_iso.md
+++ b/install_iso.md
@@ -1,43 +1,33 @@
 #Installation guide
 
-You have two ways to install YunoHost:
-
-1. From a USB key or a CD-ROM (below guide)
-2. [Through the install script on an existing Debian system](/install_on_debian)
+*Find other ways to install YunoHost **[here](/install)**.*
 
 ### Pre-requisite
 
-* An x86-[compatible hardware](/compatible_hardware) dedicated to YunoHost. Be careful to avoid having any unsaved data on it before installation.
-* Another computer to read this guide and to access your server.
-* A [reasonable ISP](/isp), with good upstream bandwidth, unlimited download/upload, and tolerant of self-hosting.
-* A USB key (via [Unetbootin](http://unetbootin.net/more-infos-and-get-it/)) or a CD burned with the latest YunoHost ISO: http://build.yunohost.org
+<img src="https://yunohost.org/images/laptop.png" width=200>
+<img src="https://yunohost.org/images/desktop.jpg">
+<img src="https://yunohost.org/images/nettop.jpg">
 
-### Boot on CD-ROM drive or USB key
+* An x86-compatible hardware dedicated to YunoHost: laptop, nettop, netbook, desktop.    
+You can reuse any computer with **more than 256MB RAM**.
+* Another computer to read this guide and access to your server.
+* A [reasonable ISP](/isp), with good upstream bandwidth, unlimited download/upload, and tolerant for self-hosting.
+* An **USB key** of at least 1GB capacity **OR** a standard **blank CD**
+* The latest **YunoHost ISO image**, available here:
 
-Boot up your server with the USB key or a CD-ROM inserted, and select it as bootable device by pressing one of the following keys (hardware specific): ```<ESC>```, ```<F8>```, ```<F10>```, ```<F11>```, ```<F12>``` ou ```<SUPPR>```
+    [http://build.yunohost.org/yunohostv2-latest-i386.iso](http://build.yunohost.org/yunohostv2-latest-i386.iso)
 
 
-### Installation process
-Connect the server to your Ethernet router.
+---
 
-Select "Graphical Install" and follow the instructions. You get to choose the system language and keyboard layout, then you must confirm the full formating of the hard drive.
+## Installation steps
 
-The installation process will run on itself, automatically downloading the required packages.
+<a class="btn btn-lg btn-default" href="/burn_or_copy_iso">1. Burn or copy ISO image</a>
 
-If this step is not successful, you probably have a connection problem. Check that your Internet connection is working.
+<a class="btn btn-lg btn-default" href="/boot_and_graphical_install">2. Boot & install</a>
 
-### Post Installation
+<a class="btn btn-lg btn-default" href="/postinstall">3. Post-install</a>
 
-Your hardware should automatically reboot after installation. At the end of the reboot, your freshly installed YunoHost system should display the IP address of your server and a proposal for post-installation: proceed to post-installation.
+---
 
-You can then either:
-* Login to http://xxxx (xxxx is your IP address) from another machine and follow the instructions post installation.
-* Run the post-installation commandline by typing the enter key on your server.
-
-Two parameters will be required:
-
-1. Domain Name: You must choose a domain name that points to the IP address of your YunoHost instance. If you choose a domain name ending with .nohost.me or .noho.st, the DNS configuration step is automatically done and you'll only have to wait 3 minutes at the end of the post-installation. If you opt for another domain name, you must previously have purchased and configured it to point to your IP address.
-
-2. Administrator Password: This is the password that will allow you to manage your YunoHost instance, **choose it carefully**, it must not be disclosed or be guessable, otherwise you can lose your system.
-
-The post-install process will then be automatic and you will have access to the administration interface via **https://votre-domaine.org/yunohost/admin**
+***If you need help during one of these steps, do not hesitate to use [our support tools](/support).***