---
title: Install YunoHost on VitualBox
template: docs
taxonomy:
    category: docs
routes:
  default: '/install_on_virtualbox'
---

*Find other ways to install YunoHost **[here](/install)**.*

## Requirements

![](image://virtualbox.png?resize=200)

* An x86 computer with VirtualBox installed and enough RAM capacity to be able to run a small virtual machine.
* The latest stable **YunoHost ISO image**, available [here](/images).

! N.B. : Installing YunoHost in a VirtualBox is usually intended for testing. To run an actual server on the long-term, you usually need a dedicated physical machine (old computer, ARM board...) or a VPS online.

---

## <small>1.</small> Create a new virtual machine

![](image://virtualbox_1.png)

<br>

* It's okay if you can only have 32-bit versions, just be sure that you downloaded the 32-bit image previously.
* 256MB RAM is the minimum required, but at least 512MB is recommended (1Go or more if you can).
* 8GB storage is the minimum required for the system, add whatever is necessary for your apps.

---

## <small>2.</small> Change network settings

**NB:** You must carry out this step. If not, the install will fail. 

Go to **Settings** > **Network**:

![](image://virtualbox_2.png)

<br>

* Select `Bridged adapter`

* Select your interface's name:

    **wlan0** if you are connected wirelessly, else **eth0**.

---

## <small>3.</small> Boot up the virtual machine

Start the virtual machine

![](image://virtualbox_2.1.png)

<br>

You will have to select your ISO image here, then you should see the YunoHost's boot screen.

<br>

If you encounter the error "VT-x is not available", you need probably need to enable Virtualization in the BIOS of your computer.

<br>

![](image://virtualbox_3.png)

<br>

* Select `Graphical install`

* Select your language, your location, your keyboard layout and let the installer do the rest :-)

---

## <small>4.</small> Proceed to post-installation

After the reboot, the system should ask you to proceed with the
post-installation

[div class="btn btn-lg btn-default"] [Post-install documentation](/postinstall) [/div]