mirror of
https://github.com/YunoHost/doc.git
synced 2024-09-03 20:06:26 +02:00
42 lines
1.5 KiB
Markdown
42 lines
1.5 KiB
Markdown
# Install YunoHost on a Raspberry Pi
|
|
|
|
*Find other ways to install YunoHost **[here](/install)**.*
|
|
|
|
## Pre-requisite
|
|
<img src="https://yunohost.org/images/Raspberry_Pi_2_Model_B_v1.1_front_angle_new.jpg" width=350>
|
|
<img src="https://yunohost.org/images/micro-sd-card.jpg">
|
|
|
|
* A Raspberry Pi model 1 or 2
|
|
* An SD card: **4GB** capacity (or more) and **class10** speed rate are highly recommended
|
|
* An other computer to read this guide and access to your Raspberry Pi
|
|
* A screen and a keyboard are recommended to control your Raspberry Pi if a problem occurs.
|
|
* A [reasonable ISP](/isp), preferably with a good and unlimited upstream bandwidth
|
|
* The **YunoHost Raspberry Pi image**, available here (to **unzip**):
|
|
|
|
[Wheezy image for Raspberry Pi 1 and 2 created the 4th june 2015](http://build.yunohost.org/yunohost4rpi2.img.7z)
|
|
|
|
---
|
|
|
|
## Installation steps
|
|
|
|
<a class="btn btn-lg btn-default" href="/copy_image">1. Copy image to the SD card</a>
|
|
|
|
<a class="btn btn-lg btn-default" href="/plug_and_boot">2. Plug & boot</a>
|
|
|
|
<a class="btn btn-lg btn-default" href="/postinstall">3. Post-install</a>
|
|
|
|
---
|
|
|
|
### Recommended after post-installation
|
|
|
|
* Connect via SSH: **root@IP.OF.RPI** (password: **yunohost**)
|
|
* Change root password: `passwd root`
|
|
* Upgrade system: `apt-get update && apt-get dist-upgrade && rpi-update`
|
|
|
|
---
|
|
|
|
#### Build image
|
|
* [Create a Raspberry Pi image](/build_arm_image_en)
|
|
|
|
***If you need help during one of these steps, do not hesitate to use [our support tools](/support).***
|
|
|