|
|
||
|---|---|---|
| prebuild | ||
| .gitignore | ||
| deploy.sh | ||
| LICENSE | ||
| README.md | ||
| Vagrantfile | ||
| ynh-dev | ||
ynh-dev - Yunohost dev environment manager
Please report issues on the following repository:
Table Of Contents
Introduction
ynh-dev is a CLI tool to manage your local development environment for YunoHost.
This allow you to develop on the various repositories of the YunoHost project.
In particular, it allows you to:
- Create a directory with a clone of each repository of the YunoHost project
- Replace Yunohost debian packages with symlinks to those git clones
Because there are many diverse constraints on the development of the Yunohost project, there is no "official" one-size-fits-all development environment. However, we do provide documentation for what developers are using now in various circumstances.
Please keep this in mind when reviewing the following options with regard to your capacities and resources when aiming to setup a development environment.
yhn-dev can be used for the following scenarios:
Local Development Path
Yunohost can be developed on using a combination of the following technologies:
- Git (any version is sufficient)
- Vagrant (>= 2.x)
- LXC (>= 3.x)
- Vagrant-LXC (>= 1.4.x)
LXC is typically lightweight but you may find the initial setup complex (in particular network configuration). Alternatively, you may be able to setup a local environnement using Virtualbox which is kinda more resource-hungry :
- Virtualbox (>= 6.x)
- Vagrant-virtualbox (>= ?.?.?)
Please keep in mind that these versions may not be available on your OS distribution and you may be required to install them as binary or from source. There are no guarantees of stability on newer major versions.
This local development path allows to work without an internet connection, but be aware that it will not allow you to easily test your email stack or deal with deploying SSL certificates, for example, as your machine is likely to not be exposed on the internet. A remote machine should be used for these cases.
Depending on your needs, this setup can be very convenient.
If choosing this path, please keep reading at the local development environment section.
Please note, there is also a setup guide for a local development path which does not require LXC. Please see the Alternative: Only Virtualbox section for more.
Remote Development Path
Yunohost can be deployed as a typical install on a remote VPS. You can then use
ynh-dev to configure a development environment on the server.
This method can potentially be faster than the local development environment assuming you have familiarity with working on VPS machines, if you always have internet connectivity when working, and if you're okay with paying a fee. It is also a good option if the required system dependencies (Vagrant, Virtualbox, etc.) are not easily available to you on your distribution.
Please be aware that this method should not be used for a end-user facing production environment.
If choosing this path, please keep reading at the remote development environment section.
Local Development Environment
Here is the development flow:
- Setup
ynh-devand the development environment - Manage YunoHost's development LXCs
- Develop on your local host and testing in the container
1. Setup ynh-dev and the development environment
First you need to install the system dependencies.
ynh-dev essentially requires Git, Vagrant, and and the LXC ecosystem. Please
see the local development path section for some idea
of the versions required.
Please consider using the latest Vagrant version from their website, distribution versions can include weird bugs that have been fixed upstream. If you still prefer to do that, here are the instructions:
The following commands should work on Linux Mint 19 (and possibly on any Debian Stretch?):
$ sudo apt update
$ sudo apt install git vagrant lxc-templates lxctl lxc cgroup-lite redir bridge-utils libc6 debootstrap libvirt-dev
$ vagrant plugin install vagrant-lxc
$ echo "cgroup /sys/fs/cgroup cgroup defaults 0 0" | sudo tee -a /etc/fstab
$ sudo mount /sys/fs/cgroup
$ lxc-checkconfig
$ echo "veth" | sudo tee -a /etc/modules
If you have install libvirtd, you need to stop it and kill dnsmasq libvirtd process, to avoid conflict with dhcp. If you don't ynh-dev start will fail because the lxc container won't be able to get an ip.
On Debian Buster, I had to re-patch the driver.rb of vagrant-lxc plugin with this version (especially the roofs_path function). I also had to install apparmor then systemctl restart apparmor for lxc-start to work.
Also check instruction on https://feeding.cloud.geek.nz/posts/lxc-setup-on-debian-stretch/.
If you run Archlinux, this page should be quite useful to setup LXC: https://github.com/fgrehm/vagrant-lxc/wiki/Usage-on-Arch-Linux-hosts
On both Debian and Archlinux, typically /etc/default/lxc-net and /etc/lxc/default.conf should look like this :
$ cat /etc/default/lxc-net
USE_LXC_BRIDGE="true"
LXC_BRIDGE="lxcbr0"
LXC_ADDR="10.0.3.1"
LXC_NETMASK="255.255.255.0"
LXC_NETWORK="10.0.3.0/24"
LXC_DHCP_RANGE="10.0.3.2,10.0.3.254"
LXC_DHCP_MAX="253"
$ cat /etc/lxc/default.conf
lxc.net.0.type = veth
lxc.net.0.link = lxcbr0
lxc.net.0.flags = up
lxc.net.0.hwaddr = 00:16:3e:xx:xx:xx
On Debian Buster, for backup stuff to work correctly with apparmor, I also had to add:
mount options=(ro, remount, bind, rbind)
mount options=(ro, remount, bind, relatime)
to /etc/apparmor.d/lxc/lxc-default-cgns and restart the apparmor service.
Then, go into your favorite development folder and deploy ynh-dev with:
curl https://raw.githubusercontent.com/yunohost/ynh-dev/master/deploy.sh | bash
This will create a new ynh-dev folder with everything you need inside.
In particular, you shall notice that there are clones or the various git repositories. In the next step, we shall start a LXC and 'link' those folders between the host and the LXC.
2. Manage YunoHost's dev LXCs
When ran on the host, the ./ynh-dev command allows you to manage YunoHost's dev LXCs.
First, you might want to start a new LXC with:
$ cd ynh-dev # if not already done
$ ./ynh-dev start
This should download an already built LXC from build.yunohost.org. If this does not work (or the LXC is outdated), you might want to (re)build a fresh LXC locally with ./ynh-dev rebuild.
After starting the LXC, you should be automatically SSH'ed inside. If you later disconnect from the LXC, you can go back in with ./ynh-dev ssh.
Later, you might want to destroy the LXC. You can do so with ./ynh-dev destroy.
3. Development and container testing
After SSH-ing inside the container, you should notice that the directory /ynh-dev is a shared folder with your host. In particular, it contains the various git clones yunohost, yunohost-admin and so on - as well as the ./ynh-dev script itself.
Inside the container, ./ynh-dev can be used to link the git clones living in the host to the code being ran inside the container.
For instance, after running:
$ ./ynh-dev use-git yunohost
The code of the git clone 'yunohost' will be directly available inside the container. Which mean that running any yunohost command inside the container will use the code from the host... This allows to develop with any tool you want on your host, then test the changes in the container.
The use-git action can be used for any package among yunohost, yunohost-admin, moulinette and ssowat with similar consequences. You might want to run use-git several times depending on what you want to develop precisely.
Note: The use-git operation can't be reverted now. Do not do this in production.
4. Testing the web interface
You should be able to access the web interface via the IP address of the container. The IP can be known from inside the container using either from ip a or with ./ynh-dev ip.
If you want to access to the interface using the domain name, you shall tweak your /etc/hosts and add a line such as:
111.222.333.444 yolo.test
Note that ./ynh-dev use-git yunohost-admin has a particular behavior: it starts a gulp watcher that shall re-compile automatically any changes in the javascript code. Hence this particular use-git will keep running until you kill it after your work is done.
Advanced: using snapshots
Vagrant is not well integrated with LXC snapshots.
However, you may still use lxc-snapshot directly to manage snapshots.
Alternative: Using Only Virtualbox
A Vagrant and Virtualbox (without LXC) guide is provided on another branch of this repository. This is a known working setup used by some developers. Please see the "virtualbox" branch for more.
Remote Development Environment
Here is the development flow:
- Setup your VPS and install YunoHost
- Setup
ynh-devand the development environment - Develop and test
1. Setup your VPS and install YunoHost
Setup a VPS somewhere (e.g. Scaleway, Digital Ocean, etc.) and install YunoHost following the usual instructions.
Depending on what you want to achieve, you might want to run the postinstall right away - and/or setup a domain with an actually working DNS.
2. Setup ynh-dev and the development environment
Deploy a ynh-dev folder at the root of the filesystem with:
$ cd /
$ curl https://raw.githubusercontent.com/yunohost/ynh-dev/master/deploy.sh | bash
$ cd /ynh-dev
3. Develop and test
Inside the VPS, ./ynh-dev can be used to link the git clones to actual the code being ran.
For instance, after running:
$ ./ynh-dev use-git yunohost
Any yunohost command will run from the code of the git clone.
The use-git action can be used for any package among yunohost, yunohost-admin, moulinette and ssowat with similar consequences.