#!/bin/bash YNH_APP_BASEDIR=$([[ "$(basename $0)" =~ ^backup|restore$ ]] && echo '../settings' || echo '..') # Handle script crashes / failures # # [internal] # # usage: # ynh_exit_properly is used only by the helper ynh_abort_if_errors. # You should not use it directly. # Instead, add to your script: # ynh_clean_setup () { # instructions... # } # # This function provide a way to clean some residual of installation that not managed by remove script. # # It prints a warning to inform that the script was failed, and execute the ynh_clean_setup function if used in the app script # # Requires YunoHost version 2.6.4 or higher. ynh_exit_properly () { local exit_code=$? rm -rf "/var/cache/yunohost/download/" if [ "$exit_code" -eq 0 ]; then exit 0 # Exit without error if the script ended correctly fi trap '' EXIT # Ignore new exit signals # Do not exit anymore if a command fail or if a variable is empty set +o errexit # set +e set +o nounset # set +u # Small tempo to avoid the next message being mixed up with other DEBUG messages sleep 0.5 if type -t ynh_clean_setup > /dev/null; then # Check if the function exist in the app script. ynh_clean_setup # Call the function to do specific cleaning for the app. fi # Exit with error status # We don't call ynh_die basically to avoid unecessary 10-ish # debug lines about parsing args and stuff just to exit 1.. exit 1 } # Exits if an error occurs during the execution of the script. # # usage: ynh_abort_if_errors # # This configure the rest of the script execution such that, if an error occurs # or if an empty variable is used, the execution of the script stops immediately # and a call to `ynh_clean_setup` is triggered if it has been defined by your script. # # Requires YunoHost version 2.6.4 or higher. ynh_abort_if_errors () { set -o errexit # set -e; Exit if a command fail set -o nounset # set -u; And if a variable is used unset trap ynh_exit_properly EXIT # Capturing exit signals on shell script } # Download, check integrity, uncompress and patch the source from app.src # # usage: ynh_setup_source --dest_dir=dest_dir [--source_id=source_id] [--keep="file1 file2"] # | arg: -d, --dest_dir= - Directory where to setup sources # | arg: -s, --source_id= - Name of the source, defaults to `app` # | arg: -k, --keep= - Space-separated list of files/folders that will be backup/restored in $dest_dir, such as a config file you don't want to overwrite. For example 'conf.json secrets.json logs/' # # This helper will read `conf/${source_id}.src`, download and install the sources. # # The src file need to contains: # ``` # SOURCE_URL=Address to download the app archive # SOURCE_SUM=Control sum # # (Optional) Program to check the integrity (sha256sum, md5sum...). Default: sha256 # SOURCE_SUM_PRG=sha256 # # (Optional) Archive format. Default: tar.gz # SOURCE_FORMAT=tar.gz # # (Optional) Put false if sources are directly in the archive root. Default: true # # Instead of true, SOURCE_IN_SUBDIR could be the number of sub directories to remove. # SOURCE_IN_SUBDIR=false # # (Optionnal) Name of the local archive (offline setup support). Default: ${src_id}.${src_format} # SOURCE_FILENAME=example.tar.gz # # (Optional) If it set as false don't extract the source. Default: true # # (Useful to get a debian package or a python wheel.) # SOURCE_EXTRACT=(true|false) # ``` # # The helper will: # - Check if there is a local source archive in `/opt/yunohost-apps-src/$APP_ID/$SOURCE_FILENAME` # - Download `$SOURCE_URL` if there is no local archive # - Check the integrity with `$SOURCE_SUM_PRG -c --status` # - Uncompress the archive to `$dest_dir`. # - If `$SOURCE_IN_SUBDIR` is true, the first level directory of the archive will be removed. # - If `$SOURCE_IN_SUBDIR` is a numeric value, the N first level directories will be removed. # - Patches named `sources/patches/${src_id}-*.patch` will be applied to `$dest_dir` # - Extra files in `sources/extra_files/$src_id` will be copied to dest_dir # # Requires YunoHost version 2.6.4 or higher. ynh_setup_source () { # Declare an array to define the options of this helper. local legacy_args=dsk local -A args_array=( [d]=dest_dir= [s]=source_id= [k]=keep= ) local dest_dir local source_id local keep # Manage arguments with getopts ynh_handle_getopts_args "$@" source_id="${source_id:-app}" keep="${keep:-}" local src_file_path="$YNH_APP_BASEDIR/conf/${source_id}.src" # Load value from configuration file (see above for a small doc about this file # format) local src_url=$(grep 'SOURCE_URL=' "$src_file_path" | cut --delimiter='=' --fields=2-) local src_sum=$(grep 'SOURCE_SUM=' "$src_file_path" | cut --delimiter='=' --fields=2-) local src_sumprg=$(grep 'SOURCE_SUM_PRG=' "$src_file_path" | cut --delimiter='=' --fields=2-) local src_format=$(grep 'SOURCE_FORMAT=' "$src_file_path" | cut --delimiter='=' --fields=2-) local src_extract=$(grep 'SOURCE_EXTRACT=' "$src_file_path" | cut --delimiter='=' --fields=2-) local src_in_subdir=$(grep 'SOURCE_IN_SUBDIR=' "$src_file_path" | cut --delimiter='=' --fields=2-) local src_filename=$(grep 'SOURCE_FILENAME=' "$src_file_path" | cut --delimiter='=' --fields=2-) # Default value src_sumprg=${src_sumprg:-sha256sum} src_in_subdir=${src_in_subdir:-true} src_format=${src_format:-tar.gz} src_format=$(echo "$src_format" | tr '[:upper:]' '[:lower:]') src_extract=${src_extract:-true} if [ "$src_filename" = "" ]; then src_filename="${source_id}.${src_format}" fi # (Unused?) mecanism where one can have the file in a special local cache to not have to download it... local local_src="/opt/yunohost-apps-src/${YNH_APP_ID}/${src_filename}" mkdir -p /var/cache/yunohost/download/${YNH_APP_ID}/ src_filename="/var/cache/yunohost/download/${YNH_APP_ID}/${src_filename}" if test -e "$local_src" then cp $local_src $src_filename else [ -n "$src_url" ] || ynh_die "Couldn't parse SOURCE_URL from $src_file_path ?" # NB. we have to declare the var as local first, # otherwise 'local foo=$(false) || echo 'pwet'" does'nt work # because local always return 0 ... local out # Timeout option is here to enforce the timeout on dns query and tcp connect (c.f. man wget) out=$(wget --tries 3 --no-dns-cache --timeout 900 --no-verbose --output-document=$src_filename $src_url 2>&1) \ || ynh_die --message="$out" fi # Check the control sum echo "${src_sum} ${src_filename}" | ${src_sumprg} --check --status \ || ynh_die --message="Corrupt source" # Keep files to be backup/restored at the end of the helper # Assuming $dest_dir already exists rm -rf /var/cache/yunohost/files_to_keep_during_setup_source/ if [ -n "$keep" ] && [ -e "$dest_dir" ] then local keep_dir=/var/cache/yunohost/files_to_keep_during_setup_source/${YNH_APP_ID} mkdir -p $keep_dir local stuff_to_keep for stuff_to_keep in $keep do if [ -e "$dest_dir/$stuff_to_keep" ] then mkdir --parents "$(dirname "$keep_dir/$stuff_to_keep")" cp --archive "$dest_dir/$stuff_to_keep" "$keep_dir/$stuff_to_keep" fi done fi # Extract source into the app dir mkdir --parents "$dest_dir" if [ -n "${final_path:-}" ] && [ "$dest_dir" == "$final_path" ] then _ynh_apply_default_permissions $dest_dir fi if ! "$src_extract" then mv $src_filename $dest_dir elif [ "$src_format" = "zip" ] then # Zip format # Using of a temp directory, because unzip doesn't manage --strip-components if $src_in_subdir then local tmp_dir=$(mktemp --directory) unzip -quo $src_filename -d "$tmp_dir" cp --archive $tmp_dir/*/. "$dest_dir" ynh_secure_remove --file="$tmp_dir" else unzip -quo $src_filename -d "$dest_dir" fi ynh_secure_remove --file="$src_filename" else local strip="" if [ "$src_in_subdir" != "false" ] then if [ "$src_in_subdir" == "true" ] then local sub_dirs=1 else local sub_dirs="$src_in_subdir" fi strip="--strip-components $sub_dirs" fi if [[ "$src_format" =~ ^tar.gz|tar.bz2|tar.xz$ ]] then tar --extract --file=$src_filename --directory="$dest_dir" $strip else ynh_die --message="Archive format unrecognized." fi ynh_secure_remove --file="$src_filename" fi # Apply patches if [ -d "$YNH_APP_BASEDIR/sources/patches/" ] then local patches_folder=$(realpath $YNH_APP_BASEDIR/sources/patches/) if (( $(find $patches_folder -type f -name "${source_id}-*.patch" 2> /dev/null | wc --lines) > "0" )) then (cd "$dest_dir" for p in $patches_folder/${source_id}-*.patch do echo $p patch --strip=1 < $p done) || ynh_die --message="Unable to apply patches" fi fi # Add supplementary files if test -e "$YNH_APP_BASEDIR/sources/extra_files/${source_id}"; then cp --archive $YNH_APP_BASEDIR/sources/extra_files/$source_id/. "$dest_dir" fi # Keep files to be backup/restored at the end of the helper # Assuming $dest_dir already exists if [ -n "$keep" ] then local keep_dir=/var/cache/yunohost/files_to_keep_during_setup_source/${YNH_APP_ID} local stuff_to_keep for stuff_to_keep in $keep do if [ -e "$keep_dir/$stuff_to_keep" ] then mkdir --parents "$(dirname "$dest_dir/$stuff_to_keep")" cp --archive "$keep_dir/$stuff_to_keep" "$dest_dir/$stuff_to_keep" fi done fi rm -rf /var/cache/yunohost/files_to_keep_during_setup_source/ } # Curl abstraction to help with POST requests to local pages (such as installation forms) # # usage: ynh_local_curl "page_uri" "key1=value1" "key2=value2" ... # | arg: page_uri - Path (relative to `$path_url`) of the page where POST data will be sent # | arg: key1=value1 - (Optionnal) POST key and corresponding value # | arg: key2=value2 - (Optionnal) Another POST key and corresponding value # | arg: ... - (Optionnal) More POST keys and values # # example: ynh_local_curl "/install.php?installButton" "foo=$var1" "bar=$var2" # # For multiple calls, cookies are persisted between each call for the same app # # `$domain` and `$path_url` should be defined externally (and correspond to the domain.tld and the /path (of the app?)) # # Requires YunoHost version 2.6.4 or higher. ynh_local_curl () { # Define url of page to curl local local_page=$(ynh_normalize_url_path $1) local full_path=$path_url$local_page if [ "${path_url}" == "/" ]; then full_path=$local_page fi local full_page_url=https://localhost$full_path # Concatenate all other arguments with '&' to prepare POST data local POST_data="" local arg="" for arg in "${@:2}" do POST_data="${POST_data}${arg}&" done if [ -n "$POST_data" ] then # Add --data arg and remove the last character, which is an unecessary '&' POST_data="--data ${POST_data::-1}" fi # Wait untils nginx has fully reloaded (avoid curl fail with http2) sleep 2 local cookiefile=/tmp/ynh-$app-cookie.txt touch $cookiefile chown root $cookiefile chmod 700 $cookiefile # Curl the URL curl --silent --show-error --insecure --location --header "Host: $domain" --resolve $domain:443:127.0.0.1 $POST_data "$full_page_url" --cookie-jar $cookiefile --cookie $cookiefile } # Create a dedicated config file from a template # # usage: ynh_add_config --template="template" --destination="destination" # | arg: -t, --template= - Template config file to use # | arg: -d, --destination= - Destination of the config file # # examples: # ynh_add_config --template=".env" --destination="$final_path/.env" # ynh_add_config --template="../conf/.env" --destination="$final_path/.env" # ynh_add_config --template="/etc/nginx/sites-available/default" --destination="etc/nginx/sites-available/mydomain.conf" # # The template can be by default the name of a file in the conf directory # of a YunoHost Package, a relative path or an absolute path. # # The helper will use the template `template` to generate a config file # `destination` by replacing the following keywords with global variables # that should be defined before calling this helper : # ``` # __PATH__ by $path_url # __NAME__ by $app # __NAMETOCHANGE__ by $app # __USER__ by $app # __FINALPATH__ by $final_path # __PHPVERSION__ by $YNH_PHP_VERSION # __YNH_NODE_LOAD_PATH__ by $ynh_node_load_PATH # ``` # And any dynamic variables that should be defined before calling this helper like: # ``` # __DOMAIN__ by $domain # __APP__ by $app # __VAR_1__ by $var_1 # __VAR_2__ by $var_2 # ``` # # The helper will verify the checksum and backup the destination file # if it's different before applying the new template. # # And it will calculate and store the destination file checksum # into the app settings when configuration is done. # # Requires YunoHost version 4.1.0 or higher. ynh_add_config () { # Declare an array to define the options of this helper. local legacy_args=tdv local -A args_array=( [t]=template= [d]=destination= ) local template local destination # Manage arguments with getopts ynh_handle_getopts_args "$@" local template_path if [ -f "$YNH_APP_BASEDIR/conf/$template" ]; then template_path="$YNH_APP_BASEDIR/conf/$template" elif [ -f "$template" ]; then template_path=$template else ynh_die --message="The provided template $template doesn't exist" fi ynh_backup_if_checksum_is_different --file="$destination" # Make sure to set the permissions before we copy the file # This is to cover a case where an attacker could have # created a file beforehand to have control over it # (cp won't overwrite ownership / modes by default...) touch $destination chown root:root $destination chmod 640 $destination cp -f "$template_path" "$destination" _ynh_apply_default_permissions $destination ynh_replace_vars --file="$destination" ynh_store_file_checksum --file="$destination" } # Replace variables in a file # # [internal] # # usage: ynh_replace_vars --file="file" # | arg: -f, --file= - File where to replace variables # # The helper will replace the following keywords with global variables # that should be defined before calling this helper : # __PATH__ by $path_url # __NAME__ by $app # __NAMETOCHANGE__ by $app # __USER__ by $app # __FINALPATH__ by $final_path # __PHPVERSION__ by $YNH_PHP_VERSION # __YNH_NODE_LOAD_PATH__ by $ynh_node_load_PATH # # And any dynamic variables that should be defined before calling this helper like: # __DOMAIN__ by $domain # __APP__ by $app # __VAR_1__ by $var_1 # __VAR_2__ by $var_2 # # Requires YunoHost version 4.1.0 or higher. ynh_replace_vars () { # Declare an array to define the options of this helper. local legacy_args=f local -A args_array=( [f]=file= ) local file # Manage arguments with getopts ynh_handle_getopts_args "$@" # Replace specific YunoHost variables if test -n "${path_url:-}" then # path_url_slash_less is path_url, or a blank value if path_url is only '/' local path_url_slash_less=${path_url%/} ynh_replace_string --match_string="__PATH__/" --replace_string="$path_url_slash_less/" --target_file="$file" ynh_replace_string --match_string="__PATH__" --replace_string="$path_url" --target_file="$file" fi if test -n "${app:-}"; then ynh_replace_string --match_string="__NAME__" --replace_string="$app" --target_file="$file" ynh_replace_string --match_string="__NAMETOCHANGE__" --replace_string="$app" --target_file="$file" ynh_replace_string --match_string="__USER__" --replace_string="$app" --target_file="$file" fi if test -n "${final_path:-}"; then ynh_replace_string --match_string="__FINALPATH__" --replace_string="$final_path" --target_file="$file" fi if test -n "${YNH_PHP_VERSION:-}"; then ynh_replace_string --match_string="__PHPVERSION__" --replace_string="$YNH_PHP_VERSION" --target_file="$file" fi if test -n "${ynh_node_load_PATH:-}"; then ynh_replace_string --match_string="__YNH_NODE_LOAD_PATH__" --replace_string="$ynh_node_load_PATH" --target_file="$file" fi # Replace others variables # List other unique (__ __) variables in $file local uniques_vars=( $(grep -oP '__[A-Z0-9]+?[A-Z0-9_]*?[A-Z0-9]*?__' $file | sort --unique | sed "s@__\([^.]*\)__@\L\1@g" )) # Do the replacement local delimit=@ for one_var in "${uniques_vars[@]}" do # Validate that one_var is indeed defined # -v checks if the variable is defined, for example: # -v FOO tests if $FOO is defined # -v $FOO tests if ${!FOO} is defined # More info: https://stackoverflow.com/questions/3601515/how-to-check-if-a-variable-is-set-in-bash/17538964#comment96392525_17538964 [[ -v "${one_var:-}" ]] || ynh_die --message="Variable \$$one_var wasn't initialized when trying to replace __${one_var^^}__ in $file" # Escape delimiter in match/replace string match_string="__${one_var^^}__" match_string=${match_string//${delimit}/"\\${delimit}"} replace_string="${!one_var}" replace_string=${replace_string//\\/\\\\} replace_string=${replace_string//${delimit}/"\\${delimit}"} # Actually replace (sed is used instead of ynh_replace_string to avoid triggering an epic amount of debug logs) sed --in-place "s${delimit}${match_string}${delimit}${replace_string}${delimit}g" "$file" done } # Render templates with Jinja2 # # [internal] # # Attention : Variables should be exported before calling this helper to be # accessible inside templates. # # usage: ynh_render_template some_template output_path # | arg: some_template - Template file to be rendered # | arg: output_path - The path where the output will be redirected to ynh_render_template() { local template_path=$1 local output_path=$2 mkdir -p "$(dirname $output_path)" # Taken from https://stackoverflow.com/a/35009576 python3 -c 'import os, sys, jinja2; sys.stdout.write( jinja2.Template(sys.stdin.read() ).render(os.environ));' < $template_path > $output_path } # Fetch the Debian release codename # # usage: ynh_get_debian_release # | ret: The Debian release codename (i.e. jessie, stretch, ...) # # Requires YunoHost version 2.7.12 or higher. ynh_get_debian_release () { echo $(lsb_release --codename --short) } # Create a directory under /tmp # # [internal] # # Deprecated helper # # usage: ynh_mkdir_tmp # | ret: the created directory path ynh_mkdir_tmp() { ynh_print_warn --message="The helper ynh_mkdir_tmp is deprecated." ynh_print_warn --message="You should use 'mktemp -d' instead and manage permissions \ properly with chmod/chown." local TMP_DIR=$(mktemp --directory) # Give rights to other users could be a security risk. # But for retrocompatibility we need it. (This helpers is deprecated) chmod 755 $TMP_DIR echo $TMP_DIR } # Remove a file or a directory securely # # usage: ynh_secure_remove --file=path_to_remove # | arg: -f, --file= - File or directory to remove # # Requires YunoHost version 2.6.4 or higher. ynh_secure_remove () { # Declare an array to define the options of this helper. local legacy_args=f local -A args_array=( [f]=file= ) local file # Manage arguments with getopts ynh_handle_getopts_args "$@" local forbidden_path=" \ /var/www \ /home/yunohost.app" if [ $# -ge 2 ] then ynh_print_warn --message="/!\ Packager ! You provided more than one argument to ynh_secure_remove but it will be ignored... Use this helper with one argument at time." fi if [[ -z "$file" ]] then ynh_print_warn --message="ynh_secure_remove called with empty argument, ignoring." elif [[ "$forbidden_path" =~ "$file" \ # Match all paths or subpaths in $forbidden_path || "$file" =~ ^/[[:alnum:]]+$ \ # Match all first level paths from / (Like /var, /root, etc...) || "${file:${#file}-1}" = "/" ]] # Match if the path finishes by /. Because it seems there is an empty variable then ynh_print_warn --message="Not deleting '$file' because it is not an acceptable path to delete." elif [ -e "$file" ] then rm --recursive "$file" else ynh_print_info --message="'$file' wasn't deleted because it doesn't exist." fi } # Extract a key from a plain command output # # [internal] # # (Deprecated, use --output-as json and jq instead) ynh_get_plain_key() { local prefix="#" local founded=0 # We call this key_ so that it's not caught as # an info to be redacted by the core local key_=$1 shift while read line do if [[ "$founded" == "1" ]] then [[ "$line" =~ ^${prefix}[^#] ]] && return echo $line elif [[ "$line" =~ ^${prefix}${key_}$ ]] then if [[ -n "${1:-}" ]] then prefix+="#" key_=$1 shift else founded=1 fi fi done } # Read the value of a key in a ynh manifest file # # usage: ynh_read_manifest --manifest="manifest.json" --key="key" # | arg: -m, --manifest= - Path of the manifest to read # | arg: -k, --key= - Name of the key to find # | ret: the value associate to that key # # Requires YunoHost version 3.5.0 or higher. ynh_read_manifest () { # Declare an array to define the options of this helper. local legacy_args=mk local -A args_array=( [m]=manifest= [k]=manifest_key= ) local manifest local manifest_key # Manage arguments with getopts ynh_handle_getopts_args "$@" if [ ! -e "$manifest" ]; then # If the manifest isn't found, try the common place for backup and restore script. manifest="$YNH_APP_BASEDIR/manifest.json" fi jq ".$manifest_key" "$manifest" --raw-output } # Read the upstream version from the manifest or `$YNH_APP_MANIFEST_VERSION` # # usage: ynh_app_upstream_version [--manifest="manifest.json"] # | arg: -m, --manifest= - Path of the manifest to read # | ret: the version number of the upstream app # # If the `manifest` is not specified, the envvar `$YNH_APP_MANIFEST_VERSION` will be used. # # The version number in the manifest is defined by `~ynh`. # # For example, if the manifest contains `4.3-2~ynh3` the function will return `4.3-2` # # Requires YunoHost version 3.5.0 or higher. ynh_app_upstream_version () { # Declare an array to define the options of this helper. local legacy_args=m local -A args_array=( [m]=manifest= ) local manifest # Manage arguments with getopts ynh_handle_getopts_args "$@" manifest="${manifest:-}" if [[ "$manifest" != "" ]] && [[ -e "$manifest" ]]; then version_key_=$(ynh_read_manifest --manifest="$manifest" --manifest_key="version") else version_key_=$YNH_APP_MANIFEST_VERSION fi echo "${version_key_/~ynh*/}" } # Read package version from the manifest # # usage: ynh_app_package_version [--manifest="manifest.json"] # | arg: -m, --manifest= - Path of the manifest to read # | ret: the version number of the package # # The version number in the manifest is defined by `~ynh`. # # For example, if the manifest contains `4.3-2~ynh3` the function will return `3` # # Requires YunoHost version 3.5.0 or higher. ynh_app_package_version () { # Declare an array to define the options of this helper. local legacy_args=m local -A args_array=( [m]=manifest= ) local manifest # Manage arguments with getopts ynh_handle_getopts_args "$@" version_key_=$YNH_APP_MANIFEST_VERSION echo "${version_key_/*~ynh/}" } # Checks the app version to upgrade with the existing app version and returns: # # usage: ynh_check_app_version_changed # | ret: `UPGRADE_APP` if the upstream version changed, `UPGRADE_PACKAGE` otherwise. # # This helper should be used to avoid an upgrade of an app, or the upstream part # of it, when it's not needed # # You can force an upgrade, even if the package is up to date, with the `--force` (or `-F`) argument : # ``` # sudo yunohost app upgrade --force # ``` # Requires YunoHost version 3.5.0 or higher. ynh_check_app_version_changed () { local return_value=${YNH_APP_UPGRADE_TYPE} if [ "$return_value" == "UPGRADE_FULL" ] || [ "$return_value" == "UPGRADE_FORCED" ] || [ "$return_value" == "DOWNGRADE_FORCED" ] then return_value="UPGRADE_APP" fi echo $return_value } # Compare the current package version against another version given as an argument. # # usage: ynh_compare_current_package_version --comparison (lt|le|eq|ne|ge|gt) --version # | arg: --comparison - Comparison type. Could be : `lt` (lower than), `le` (lower or equal), `eq` (equal), `ne` (not equal), `ge` (greater or equal), `gt` (greater than) # | arg: --version - The version to compare. Need to be a version in the yunohost package version type (like `2.3.1~ynh4`) # | ret: 0 if the evaluation is true, 1 if false. # # example: ynh_compare_current_package_version --comparison lt --version 2.3.2~ynh1 # # This helper is usually used when we need to do some actions only for some old package versions. # # Generally you might probably use it as follow in the upgrade script : # ``` # if ynh_compare_current_package_version --comparison lt --version 2.3.2~ynh1 # then # # Do something that is needed for the package version older than 2.3.2~ynh1 # fi # ``` # # Requires YunoHost version 3.8.0 or higher. ynh_compare_current_package_version() { local legacy_args=cv declare -Ar args_array=( [c]=comparison= [v]=version= ) local version local comparison # Manage arguments with getopts ynh_handle_getopts_args "$@" local current_version=$YNH_APP_CURRENT_VERSION # Check the syntax of the versions if [[ ! $version =~ '~ynh' ]] || [[ ! $current_version =~ '~ynh' ]] then ynh_die --message="Invalid argument for version." fi # Check validity of the comparator if [[ ! $comparison =~ (lt|le|eq|ne|ge|gt) ]]; then ynh_die --message="Invalid comparator must be : lt, le, eq, ne, ge, gt" fi # Return the return value of dpkg --compare-versions dpkg --compare-versions $current_version $comparison $version } # Check if we should enforce sane default permissions (= disable rwx for 'others') # on file/folders handled with ynh_setup_source and ynh_add_config # # [internal] # # Having a file others-readable or a folder others-executable(=enterable) # is a security risk comparable to "chmod 777" # # Configuration files may contain secrets. Or even just being able to enter a # folder may allow an attacker to do nasty stuff (maybe a file or subfolder has # some write permission enabled for 'other' and the attacker may edit the # content or create files as leverage for priviledge escalation ...) # # The sane default should be to set ownership to $app:$app. # In specific case, you may want to set the ownership to $app:www-data # for example if nginx needs access to static files. # _ynh_apply_default_permissions() { local target=$1 local ynh_requirement=$(jq -r '.requirements.yunohost' $YNH_APP_BASEDIR/manifest.json | tr -d '>= ') if [ -z "$ynh_requirement" ] || [ "$ynh_requirement" == "null" ] || dpkg --compare-versions $ynh_requirement ge 4.2 then chmod o-rwx $target chmod g-w $target chown -R root:root $target if ynh_system_user_exists $app then chown $app:$app $target fi fi }