Monitorix pour YunoHost

Read this readme in english.

Ce package vous permet d'installer Monitorix rapidement et simplement sur un serveur YunoHost. Si vous n'avez pas YunoHost, regardez ici pour savoir comment l'installer et en profiter.

Vue d'ensemble

Monitorix is a free, open source, lightweight system monitoring tool designed to monitor as many services and system resources as possible. It has been created to be used under production Linux/UNIX servers, but due to its simplicity and small size can be used on embedded devices as well.

Version incluse : 3.12.0~ynh2

Démo : https://www.fibranet.cat/monitorix/

Captures d'écran

Avertissements / informations importantes

More sensor

If you want to see the temperature of some sensor you can install the lm-sensor packet. For disk temperature you can instal the hddtemp packet.

Custom config

If you want do custom the monitorix config for more personnal information you can add a file in /etc/monitorix/conf.d/. This config file will be overwritte the original config in /etc/monitorix/monitorix.conf.

You will have a full complete documentation for monitorix config here : https://www.monitorix.org/documentation.html

By example you can extends the basic config by this :

priority = 5

<graph_enable>

        disk            = y
        lmsens          = y
        gensens         = y
        mail            = y
</graph_enable>

# LMSENS graph
# -----------------------------------------------------------------------------
<lmsens>
        <list>
                core0   = temp1
                core1   = 
                mb0     = 
                cpu0    =
                fan0    =
                fan1    =
                fan2    =
                volt0   =
                volt1   =
                volt2   =
                volt3   = 
                volt4   =
                volt5   = 
                volt6   = 
                volt7   =
        </list>
</lmsns> 

# GENSENS graph
# -----------------------------------------------------------------------------
<gensens>
        <list>
                0 = cpu_temp
                1 = cpu0_freq, cpu1_freq, cpu2_freq, cpu3_freq
        </list>
        <desc>
                cpu_temp = /sys/class/thermal/thermal_zone0/temp
                cpu0_freq = /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq
                cpu1_freq = /sys/devices/system/cpu/cpu1/cpufreq/cpuinfo_cur_freq
                cpu2_freq = /sys/devices/system/cpu/cpu2/cpufreq/cpuinfo_cur_freq
                cpu3_freq = /sys/devices/system/cpu/cpu3/cpufreq/cpuinfo_cur_freq
        </desc>
        <unit>
                cpu_temp = 1000
                cpu0_freq = 0.001
                cpu1_freq = 0.001
                cpu2_freq = 0.001
                cpu3_freq = 0.001
        </unit>
        <map>
                cpu_temp = CPU Temperature
                cpu0_freq = CPU 0 Frequency
                cpu1_freq = CPU 1 Frequency
                cpu2_freq = CPU 2 Frequency
                cpu3_freq = CPU 3 Frequency
        </map>
        <alerts>
            cpu_temp = 300, 65, /etc/monitorix/monitorix_alerts_scripts/cpu_temp.sh
        </alerts>
</gensens>

# DISK graph
# -----------------------------------------------------------------------------
<disk>
        <list>
                0 = /dev/sda
        </list>
        <alerts>
                realloc_enabled = y
                realloc_timeintvl = 0
                realloc_threshold = 1
                realloc_script = /etc/monitorix/monitorix_alerts_scripts/disk_realloc.sh
                pendsect_enabled = y
                pendsect_timeintvl = 0
                pendsect_threshold = 1
                pendsect_script = /etc/monitorix/monitorix_alerts_scripts/disk_pendsect.sh
        </alerts>
</disk>

# FS graph
# -----------------------------------------------------------------------------
<fs>
        <list>
                0 = /, /home, /var, /$tempdir, swap
        </list>
        <desc> 
                / = Root FS
                /home = home
                /var = var
                /$tempdir = tmp
        </desc>
        <devmap>
        </devmap>
        rigid = 2, 0, 2, 0
        limit = 100, 1000, 100, 1000
        <alerts>
            / = 3600, 98, /etc/monitorix/monitorix_alerts_scripts/fs_rootfs.sh
            /home = 3600, 98, /etc/monitorix/monitorix_alerts_scripts/fs_home.sh
            /var = 3600, 98, /etc/monitorix/monitorix_alerts_scripts/fs_var.sh
            /$tempdir = 3600, 98, /etc/monitorix/monitorix_alerts_scripts/fs_tmp.sh
            swap = 3600, 98, /etc/monitorix/monitorix_alerts_scripts/fs_swap.sh
        </alerts>
</fs>


# MAIL graph
# -----------------------------------------------------------------------------
<mail>
        mta = postfix
        greylist = postgrey
        stats_rate = real
        rigid = 0, 0, 0, 0, 0
        limit = 1, 1000, 1000, 1000, 1000
        <alerts>
                delvd_enabled = y
                delvd_timeintvl = 60
                delvd_threshold = 100
                delvd_script = /etc/monitorix/monitorix_alerts_scripts/mail_delvd.sh
                mqueued_enabled = y
                mqueued_timeintvl = 3600
                mqueued_threshold = 100
                mqueued_script = /etc/monitorix/monitorix_alerts_scripts/mail_mqueued.sh
        </alerts>
</mail>


# NET graph
# -----------------------------------------------------------------------------
<net>
        list = eth0,lo
        <desc>
                eth0 = FastEthernet LAN, 0, 10000000
                lo = loopback, 0, 10000000
        </desc>

        gateway = eth0
</net>

# PROCESS graph
# -----------------------------------------------------------------------------
<process>
        <list>
                0 = sshd, ntpd, monitorix, monitorix-httpd
                1 = openvpn, ...
                ...
                6 = mysqld, slapd, postgresql
        </list>
        <desc>
                master = Postfix
                imap = Dovecot
        </desc>
        rigid = 2, 0, 0, 0, 0, 0, 0, 0
        limit = 100, 1000, 1000, 1000, 1000, 1000, 1000, 1000
</process>



<emailreports>
        enabled = y
        url_prefix = http://127.0.0.1:8081/monitorix
        smtp_hostname = localhost
        from_address = noreply@domain.tld
        hour = 2
        minute = 7
        <daily>
                enabled = y
                graphs = system, fs, gensens, disk, netstat, port, nginx
                to = user@domain.tld
        </daily>
        <weekly>
                enabled = y
                graphs = system, fs, gensens, disk, kern, proc, net, netstat, process, serv, port, user, nginx, mysql, fail2ban, int
                to = user@domain.tld
        </weekly>
        <monthly>
                enabled = y
                graphs = system, fs, gensens, disk, kern, proc, net, netstat, process, serv, port, user, nginx, mysql, fail2ban, int
                to = user@domain.tld
        </monthly>
        <yearly>
                enabled = y
                graphs = system, fs, gensens, disk, kern, proc, net, netstat, process, serv, port, user, nginx, mysql, fail2ban, int
                to = user@domain.tld
        </yearly>
</emailreports>

In this config we have :

We set the process priority to 5 (which mean that it will be lower priority than the other process).
We get the lmsensor sensor data.
We get some sensors data not accessible with lmsensor (with gensens)
We check the disk health and send an email if any error happens. For that you need to make some script. An example is available in /usr/share/doc/monitorix/monitorix-alert.sh.
We check the filesystem.
We check the traffic in the network card.
We check some process.
We send every day, week, month and year a rapport.

Documentations et ressources

Site officiel de l'app : http://monitorix.org
Documentation officielle de l'admin : https://www.monitorix.org/documentation.html
Dépôt de code officiel de l'app : https://github.com/mikaku/Monitorix
Documentation YunoHost pour cette app : https://yunohost.org/app_monitorix
Signaler un bug : https://github.com/YunoHost-Apps/monitorix_ynh/issues

Informations pour les développeurs

Merci de faire vos pull request sur la branche testing.

Pour essayer la branche testing, procédez comme suit.

sudo yunohost app install https://github.com/YunoHost-Apps/monitorix_ynh/tree/testing --debug
ou
sudo yunohost app upgrade monitorix -u https://github.com/YunoHost-Apps/monitorix_ynh/tree/testing --debug

Plus d'infos sur le packaging d'applications : https://yunohost.org/packaging_apps

9.3 KiB Raw Blame History