doc/install_on_arm_board.md

# Install YunoHost on ARM board

*Find other ways to install YunoHost **[here](/install)**.*

<center>
<img src="/images/olinuxino.jpg" width=250 style="padding-bottom:20px">
<img src="/images/micro-sd-card.jpg">
</center>

<div class="alert alert-info" markdown="1">
Before setting up a server at home, it is recommended that you know the [possible limitations imposed by your ISP](/isp). If they are too restrictive, you might consider using a VPN to bypass them.
</div>

## Pre-requisites

- An ARM board with 500MHz CPU and 512MB RAM ;
- A power supply for your board ;
- A microSD card: **8GB** capacity (at least) and **Class 10** speed rate are highly recommended (like the [Transcend 300x](http://www.amazon.fr/Transcend-microSDHC-adaptateur-TS32GUSDU1E-Emballage/dp/B00CES44EO)) ;
- An ethernet cable (RJ-45) to connect your board to your router ;
- A [reasonable ISP](/isp), preferably with a good and unlimited upload bandwidth.

---

## Install with the pre-installed image (recommended)

<a class="btn btn-lg btn-default" href="/images">0. Download the pre-installed image for your board</a>
<br>
<small class="text-info">If no pre-installed image exists for your board, you can follow the instructions to "Install on top of ARMbian"</small>

<a class="btn btn-lg btn-default" href="/burn_or_copy_iso">1. Flash the SD card with the image</a>

<a class="btn btn-lg btn-default" href="/plug_and_boot">2. Power up the board and let it boot</a>

<a class="btn btn-lg btn-default" href="/ssh">3. Connect to your server with SSH</a>

<a class="btn btn-lg btn-default" href="/postinstall">4. Proceed with the initial configuration (post-installation)</a>

---

## Install on top of ARMbian

<a class="btn btn-lg btn-default" href="https://www.armbian.com/download/">0. Download the ARMbian image for your board</a>

<a class="btn btn-lg btn-default" href="/burn_or_copy_iso">1. Flash the SD card with the image</a>

<a class="btn btn-lg btn-default" href="/plug_and_boot">2. Plug & boot</a>

<a class="btn btn-lg btn-default" href="/ssh">3. Connect to your server with SSH</a>

<a class="btn btn-lg btn-default" href="/install_manually">4. Follow the generic install procedure</a>
-												[enh] generalize documentation to all ARM boards.
- Generalize cubieboard pages to ARM boards
- Rename cubieboard pages to ARM board
- Update pages which lists cubieboard pages
- Add CPU 500MHz minimum requirement for YunoHost

											
										
										
											2016-05-22 22:00:56 +02:00
+								# Install YunoHost on ARM board
-												Update install_on_cubieboard.md

											
										
										
											2014-05-16 12:53:22 +02:00
 								*Find other ways to install YunoHost **[here](/install)**.*
-												translation of certain articles to english

											
										
										
											2014-01-01 17:04:02 +01:00
-												Make RPi install doc and ARM install doc bit more uniform

											
										
										
											2018-06-26 20:00:23 +02:00
+								<center>
 								<img src="/images/olinuxino.jpg" width=250 style="padding-bottom:20px">
-												[enh] Use absolute path without domain for images.

											
										
										
											2016-03-22 09:14:24 +01:00
+								<img src="/images/micro-sd-card.jpg">
-												Make RPi install doc and ARM install doc bit more uniform

											
										
										
											2018-06-26 20:00:23 +02:00
+								</center>
 								<div class="alert alert-info" markdown="1">
 								Before setting up a server at home, it is recommended that you know the [possible limitations imposed by your ISP](/isp). If they are too restrictive, you might consider using a VPN to bypass them.
 								</div>
 								## Pre-requisites
-												Update install_on_cubieboard.md

											
										
										
											2014-06-05 11:40:58 +02:00
-												Make RPi install doc and ARM install doc bit more uniform

											
										
										
											2018-06-26 20:00:23 +02:00
+								- An ARM board with 500MHz CPU and 512MB RAM ;
 								- A power supply for your board ;
 								- A microSD card: **8GB** capacity (at least) and **Class 10** speed rate are highly recommended (like the [Transcend 300x](http://www.amazon.fr/Transcend-microSDHC-adaptateur-TS32GUSDU1E-Emballage/dp/B00CES44EO)) ;
 								- An ethernet cable (RJ-45) to connect your board to your router ;
 								- A [reasonable ISP](/isp), preferably with a good and unlimited upload bandwidth.
-												Update install_on_cubieboard.md

											
										
										
											2014-05-16 12:53:22 +02:00
 								---
-												translation of certain articles to english

											
										
										
											2014-01-01 17:04:02 +01:00
-												Make RPi install doc and ARM install doc bit more uniform

											
										
										
											2018-06-26 20:00:23 +02:00
+								## Install with the pre-installed image (recommended)
-												translation of certain articles to english

											
										
										
											2014-01-01 17:04:02 +01:00
-												We do support arm64 now

											
										
										
											2020-09-06 16:33:07 +02:00
+								<a class="btn btn-lg btn-default" href="/images">0. Download the pre-installed image for your board</a>
 								<br>
 								<small class="text-info">If no pre-installed image exists for your board, you can follow the instructions to "Install on top of ARMbian"</small>
-												translation of certain articles to english

											
										
										
											2014-01-01 17:04:02 +01:00
-												Misc fixes / improvements / drop outdated stuff..

											
										
										
											2020-04-20 19:17:40 +02:00
+								<a class="btn btn-lg btn-default" href="/burn_or_copy_iso">1. Flash the SD card with the image</a>
-												Update install_on_cubieboard.md

											
										
										
											2014-10-17 20:33:35 +02:00
-												Misc wording improvements

											
										
										
											2019-09-06 17:42:21 +02:00
+								<a class="btn btn-lg btn-default" href="/plug_and_boot">2. Power up the board and let it boot</a>
-												translation of certain articles to english

											
										
										
											2014-01-01 17:04:02 +01:00
-												Make RPi install doc and ARM install doc bit more uniform

											
										
										
											2018-06-26 20:00:23 +02:00
+								<a class="btn btn-lg btn-default" href="/ssh">3. Connect to your server with SSH</a>
-												translation of certain articles to english

											
										
										
											2014-01-01 17:04:02 +01:00
-												Misc wording improvements

											
										
										
											2019-09-06 17:42:21 +02:00
+								<a class="btn btn-lg btn-default" href="/postinstall">4. Proceed with the initial configuration (post-installation)</a>
-												Update install_on_cubieboard.md

											
										
										
											2014-10-14 19:11:40 +02:00
 								---
-												fix minor typo

											
										
										
											2020-05-12 18:02:39 +02:00
+								## Install on top of ARMbian
-												Update install_on_cubieboard.md

											
										
										
											2015-06-12 23:13:23 +02:00
-												Make RPi install doc and ARM install doc bit more uniform

											
										
										
											2018-06-26 20:00:23 +02:00
+								<a class="btn btn-lg btn-default" href="https://www.armbian.com/download/">0. Download the ARMbian image for your board</a>
-												Misc fixes / improvements / drop outdated stuff..

											
										
										
											2020-04-20 19:17:40 +02:00
+								<a class="btn btn-lg btn-default" href="/burn_or_copy_iso">1. Flash the SD card with the image</a>
-												Make RPi install doc and ARM install doc bit more uniform

											
										
										
											2018-06-26 20:00:23 +02:00
-												Reuniformize links

											
										
										
											2020-03-28 06:54:10 +01:00
+								<a class="btn btn-lg btn-default" href="/plug_and_boot">2. Plug & boot</a>
-												Update install_on_cubieboard.md

											
										
										
											2015-12-13 12:52:45 +01:00
-												Reuniformize links

											
										
										
											2020-03-28 06:54:10 +01:00
+								<a class="btn btn-lg btn-default" href="/ssh">3. Connect to your server with SSH</a>
-												Update install_on_cubieboard.md

											
										
										
											2014-10-11 14:31:00 +02:00
-												Reuniformize links

											
										
										
											2020-03-28 06:54:10 +01:00
+								<a class="btn btn-lg btn-default" href="/install_manually">4. Follow the generic install procedure</a>