On an installation at home, your server should typically be accessible using the `yunohost.local` domain. If for any reason this does not work, you may need to find the *local* IP of your server.
The local IP is the address used to refer to your server inside the local network (typically your home) where multiple devices are connected to a router (your internet box). The local IP typically looks like `192.168.x.y` (or sometimes `10.0.x.y` or `172.16.x.y`)
You can use the [AngryIP](https://angryip.org/download/) software to achieve that. You just need to scan these local ip ranges in this order until you find the active IP corresponding to your server:
-`192.168.0.0` -> `192.168.0.255`
-`192.168.1.0` -> `192.168.1.255`
-`192.168.2.0` -> `192.168.255.255`
-`10.0.0.0` -> `10.0.255.255`
-`172.16.0.0` -> `172.31.255.255`
!!! **Tips**:
!!! - you can order by ping like on this screenshot to easily see effectively-used IP.
!!! - your server should typically be displayed as listening on port 80 and 443
Connect to your internet box / router interface to list the machines connected.
[/ui-tab]
[ui-tab title="With arp-scan"]
If you're using Linux, you can open a terminal and use `sudo arp-scan --local` to list the IP on your local network (this may also work in Windows);
If the `arp-scan` command displays a confusing number of devices, you can check which ones are open to SSH with `nmap -p 22 192.168.1.0/24` to sort them out (adapt the IP range to your local network)
