mirror of
https://github.com/YunoHost/doc.git
synced 2024-09-03 20:06:26 +02:00
45 lines
1.8 KiB
Markdown
45 lines
1.8 KiB
Markdown
# Install YunoHost on a Raspberry Pi
|
|
|
|
*Find other ways to install YunoHost **[here](/install)**.*
|
|
|
|
## Requirements
|
|
<img src="/images/Raspberry_Pi_2_Model_B_v1.1_front_angle_new.jpg" width=350>
|
|
<img src="/images/micro-sd-card.jpg">
|
|
|
|
- A Raspberry Pi model 1, 2 or 3
|
|
- A SD card: **4GB** capacity (or more) and **class10** speed rate is highly recommended
|
|
- A different computer to read this guide and access your Raspberry Pi
|
|
- A screen and a keyboard, recommended if a problem occurs and you want to control your Raspberry Pi
|
|
- A [reasonable ISP](/isp), preferably with a good and unlimited upload bandwidth
|
|
- **YunoHost Raspberry Pi images**, available here:
|
|
- [Official Wheezy/YunoHost 2.2 created the 4th June 2015](https://build.yunohost.org/yunohost-rpi2_wheezy.7z)
|
|
- [Non-official Jessie/YunoHost 2.2 created the 5th December 2015](https://forum.yunohost.org/t/building-a-new-image-for-raspberry-debian-jessie-fr-en/1101/2)
|
|
|
|
|
|
<div class="alert alert-info">**This two images are old**. YunoHost image for Raspberry Pi is not maintained, feel free to contribute and contact us if you would like to [maintain an image](build_arm_image_en) for YunoHost project.</div>
|
|
|
|
|
|
---
|
|
|
|
## Installation steps
|
|
|
|
<a class="btn btn-lg btn-default" href="/copy_image">1. Copy image to the SD card</a>
|
|
|
|
<a class="btn btn-lg btn-default" href="/plug_and_boot">2. Plug & boot</a>
|
|
|
|
<a class="btn btn-lg btn-default" href="/postinstall">3. Post-install</a>
|
|
|
|
---
|
|
|
|
### Recommended after running the post-installation
|
|
|
|
* Connect via SSH: **root@IP.OF.RPI** (password: **yunohost**)
|
|
* Change root password: `passwd root`
|
|
* Upgrade system: `apt-get update && apt-get dist-upgrade && rpi-update`
|
|
|
|
---
|
|
|
|
#### Build image
|
|
* [Create a Raspberry Pi image](/build_arm_image_en)
|
|
|
|
***If you need help during one of these steps, do not hesitate to use [our support channels](/support).***
|