mirror of
https://github.com/YunoHost/doc.git
synced 2024-09-03 20:06:26 +02:00
46 lines
1.7 KiB
Markdown
46 lines
1.7 KiB
Markdown
# Flashing the YunoHost ISO
|
|
|
|
Now that you downloaded the ISO image of YunoHost, you should flash/burn it on a physical medium. Typically, this is done on a **USB stick** or an **SD card**.
|
|
|
|
<img src="/images/sdcard.jpg" width=100>
|
|
<img src="/images/micro-sd-card.jpg" width=100>
|
|
<img src="/images/usb_key.png" width=150>
|
|
<img src="/images/cd.jpg" width=100>
|
|
|
|
### (Recommended) With Etcher
|
|
|
|
Download <a href="https://etcher.io/" target="_blank">Etcher</a> for your operating system and install it.
|
|
|
|
<img src="/images/etcher.gif">
|
|
|
|
Plug your USB stick, select your YunoHost ISO and click "Flash"
|
|
|
|
### With UNetbootin
|
|
|
|
Download <a href="https://unetbootin.github.io/">UNetbootin</a> for your operating system and install it.
|
|
|
|
<img src="/images/unetbootin.png">
|
|
|
|
Put your USB stick on, select your YunoHost ISO and click "OK"
|
|
|
|
|
|
### With `dd`
|
|
|
|
If you are on GNU/Linux / macOS and know your way around command line, you may also flash your USB stick or SD card with `dd`. You can identify which device corresponds to your USB stick or SD card with `fdisk -l` or `lsblk`. A typical SD card name is something like `/dev/mmcblk0`. BE CAREFUL and make sure you got the right name.
|
|
|
|
Then run :
|
|
|
|
```bash
|
|
# Replace /dev/mmcblk0 if the name of your device is different...
|
|
dd if=/path/to/yunohost.img of=/dev/mmcblk0
|
|
```
|
|
|
|
### Burning a CD/DVD
|
|
|
|
For older devices, you might want to burn a CD/DVD. The software to use depends on your operating system.
|
|
|
|
* On Windows, use [ImgBurn](http://www.imgburn.com/) to write the image file on the disc
|
|
|
|
* On macOS, use [Disk Utility](http://support.apple.com/kb/ph7025)
|
|
|
|
* On GNU/Linux, you have plenty of choices, like [Brasero](https://wiki.gnome.org/Apps/Brasero) or [K3b](http://www.k3b.org/)
|