mirror of
https://github.com/YunoHost/doc.git
synced 2024-09-03 20:06:26 +02:00
88d201fbf7
- Add link to the more recent community build image (December 2015) using Jessie. - Add message that RPI images are not maintained and need a maintainer.
1.7 KiB
1.7 KiB
Install YunoHost on a Raspberry Pi
Find other ways to install YunoHost here.
Pre-requisite
- A Raspberry Pi model 1, 2 or 3
- An SD card: 4GB capacity (or more) and class10 speed rate are highly recommended
- An other computer to read this guide and access to your Raspberry Pi
- A screen and a keyboard are recommended to control your Raspberry Pi if a problem occurs.
- A reasonable ISP, preferably with a good and unlimited upstream bandwidth
- YunoHost Raspberry Pi images, available here:
- Official Wheezy/YunoHost 2.2 created the 4th June 2015
- Non-official Jessie/YunoHost 2.2 created the 5th December 2015
**This two images are old**. Nobody is maintaining a YunoHost image for Raspberry Pi. You could maintain on image for YunoHost project.
Installation steps
Recommended after post-installation
- Connect via SSH: root@IP.OF.RPI (password: yunohost)
- Change root password:
passwd root - Upgrade system:
apt-get update && apt-get dist-upgrade && rpi-update
Build image
If you need help during one of these steps, do not hesitate to use our support tools.