doc/install_on_raspberry.md

Install YunoHost on a Raspberry Pi

Find other ways to install YunoHost here.

Pre-requisite

• A Raspberry Pi model 1 or 2

• An SD card: 4GB capacity (or more) and class10 speed rate are highly recommended

• An other computer to read this guide and access to your Raspberry Pi

• A screen and a keyboard are recommended to control your Raspberry Pi if a problem occurs.

• A reasonable ISP, preferably with a good and unlimited upstream bandwidth

• The YunoHost Raspberry Pi image, available here (to unzip):

  http://build.yunohost.org/yunohost4rpi2.img.7z

---

Installation steps

1. Copy image to the SD card

2. Plug & boot

3. Post-install

---

Recommended after post-installation

• Connect via SSH: root@IP.OF.RPI (password: yunohost)
• Change root password: passwd root
• Upgrade system: apt-get update && apt-get dist-upgrade && rpi-update

---

Build image

• Create a Raspberry Pi image

If you need help during one of these steps, do not hesitate to use our support tools.