Adding an external storage to your server

Introduction

If you did not allocate a large partition to /home before installing YunoHost, and that your apps require a lot of spaces, you can still add an external driver after setting up your system.

Before starting

Even though these steps are relatively simple, they may appear technical. In any case, they require you to take your time.

You should be connected as root on your server, for instance via SSH. (Note: being logged as admin, you can upgrade to root with the command sudo su)

It can be useful to create a backup of your install before starting.

You should also have your external drive (plugged via USB or SATA).

1. Connect and identify the disk

Start by connecting your drive to the system. You shall then identify which name is used by the system to refer to the disk.

You can do this with this command :

lsblk

It may yield something like this :

NAME        MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda           8:0    0 931.5G  0 disk 
└─sda1        8:1    0 931.5G  0 part 
mmcblk0     179:0    0  14.9G  0 disk 
├─mmcblk0p1 179:1    0  47.7M  0 part /boot
└─mmcblk0p2 179:2    0  14.8G  0 part /

Here, mmcblk0 corresponds to an SD card of 16Go (the partitions mmcblk0p1 et mmcblk0p2 are used as the boot partition /boot and the system partition /). The external drive is sda which is about 1TB and has only one partition sda1 which is not mounted (no "MOUNTPOINT").

On a different setup, your system partition might be `sda` and so your external drive might be `sdb` for instance.

2. (Optionnal) Format the disk

If you want, you can format the disk before starting to use it. You should be aware that formating a drive implies to erasing every data on it ! If your disk is already "clean", you may ignore this step.

To format the partition :

mkfs.ext4 /dev/YOUR_DISK
# then 'y' to validate

(Replace YOUR_DISK by the name of the disk. Be careful not to do any mistake here, as it can mean erasing data on your main system if you are using the wrong name ! In the previous example, the name of our disk was sda.)

Then, let's create a new partition on the disk which just got formatted :

fdisk /dev/YOUR_DISK

then sucessfully type n, p, 1, Enter, Enter, then w to create the new partition.

Check with lsblk that your disk really does contain a single partition.

3. Mount the disk

"Mounting" a disk corresponds to making it effectively accessible in the filesystem tree. Here, we choose the arbitrary name /media/storage but you can choose a different name (for instance, /media/my_disk ... ).

Let's start by creating the directory :

mkdir /media/storage

Then we can manually mount the disk with :

mount /dev/YOUR_DISK1 /media/storage

(Here, /dev/YOUR_DISK1 corresponds to the first partition on the disk)

Next, you should be able to create files in /media/stockage, and, for instance, add /media/stockage as an external drive in Nextcloud.

4. Mount the disk automatically at boot

So far, we only mounted the disk manually. But it can be nice and useful to have it being mounted automatically at each boot.

Let's start by finding the UUID (universal identifier) of the disk with :

blkid | grep "/dev/YOUR_DISK1:"
# Should return something like
# /dev/sda1:UUID="cea0b7ae-2fbc-4f01-8884-3cb5884c8bb7" TYPE="ext4" PARTUUID="34e4b02c-02"

Let's add a line in the file /etc/fstab which manages which disks are mounted at boot. We open this file with nano :

nano /etc/fstab

And add this line :

UUID="cea0b7ae-2fbc-4f01-8884-3cb5884c8bb7" /media/storage ext4 defaults,nofail 0 0

(this line should be adapated according to previous info and choices)

Use Ctrl+X then y to save.

You can then reboot the system to test if the disk is mounted automatically.

4 KiB Raw Blame History