mirror of
https://github.com/YunoHost/doc.git
synced 2024-09-03 20:06:26 +02:00
58 lines
2.7 KiB
Markdown
58 lines
2.7 KiB
Markdown
# Install YunoHost on a Raspberry Pi
|
|
|
|
*Find all the ways to install YunoHost **[here](/install)**.*
|
|
|
|
<center>
|
|
<img src="/images/raspberrypi.jpg" width=350>
|
|
</center>
|
|
|
|
<div class="alert alert-info" markdown="1">
|
|
Before setting up a server at home, it is recommended that you know the [possible limitations imposed by your ISP](/isp). If they are too restrictive, you might consider using a VPN to bypass them.
|
|
</div>
|
|
|
|
## Pre-requisite
|
|
|
|
- A Raspberry Pi 0, 1, 2 or 3 ;
|
|
- An SD card: **8GB** capacity (at least) and **Class 10** speed rate are highly recommended (like the [Transcend 300x](http://www.amazon.fr/Transcend-microSDHC-adaptateur-TS32GUSDU1E-Emballage/dp/B00CES44EO)) ;
|
|
- A power supply (either an adapter or a MicroUSB cable)
|
|
- An ethernet cable (RJ-45) to connect your Raspberry Pi to your router. (Raspberry Pi Zero users can connect the Pi using an OTG cable, Wifi dongle and [following these instructions](https://davidmaitland.me/2015/12/raspberry-pi-zero-headless-setup/). And for [Raspberry Pi Zero Wireless](https://core-electronics.com.au/tutorials/raspberry-pi-zerow-headless-wifi-setup.html).)
|
|
|
|
---
|
|
|
|
## Installation using the image (recommended)
|
|
|
|
<a class="btn btn-lg btn-default" href="/images">0. Download the pre-installed image for Raspberry Pi</a>
|
|
|
|
<a class="btn btn-lg btn-default" href="/copy_image">1. Copy image to the SD card</a>
|
|
|
|
<a class="btn btn-lg btn-default" href="/plug_and_boot">2. Plug & boot</a>
|
|
|
|
<a class="btn btn-lg btn-default" href="/ssh">3. Connect to your server with SSH</a>
|
|
|
|
<a class="btn btn-lg btn-default" href="/postinstall">4. Proceed to post-installation</a>
|
|
|
|
---
|
|
|
|
## Manual installation (advanced users)
|
|
|
|
<div class="alert alert-warning" markdown="1">
|
|
We do not recommend the manual installation because it is more technical and longer than using the pre-installed image. This documentation is only intended for advanced users.
|
|
</div>
|
|
|
|
<div class="alert alert-warning" markdown="1">
|
|
The latest Rasbpian images requires a screen and a keyboard, as it is no longer possible to connect directly to the Raspberry through SSH. Nevertheless it is possible to re-enable SSH at boot : before starting your Raspberry, put in the boot partition of the SD card an empty file named `ssh` (without extension).
|
|
</div>
|
|
|
|
0. Install Raspbian Stretch Lite on the SD card ([instructions](https://www.raspberrypi.org/downloads/raspbian/)).
|
|
|
|
1. Connect to your Raspberry Pi with the user `pi`. Set the root password with
|
|
```bash
|
|
sudo passwd root
|
|
```
|
|
|
|
2. Edit `/etc/ssh/sshd_config` to allow ssh login for root, by replacing `PermitRootLogin without-password` with `PermitRootLogin yes`. Reload the ssh daemon with `service ssh reload`.
|
|
|
|
3. Disconnect and reconnect, this time as root.
|
|
|
|
4. Then follow the <a href="/install_manually">generic manual install procedure</a>.
|
|
|