mirror of
https://github.com/YunoHost/doc.git
synced 2024-09-03 20:06:26 +02:00
58 lines
2.9 KiB
Markdown
58 lines
2.9 KiB
Markdown
---
|
|
title: Install YunoHost on a Raspberry Pi
|
|
template: docs
|
|
taxonomy:
|
|
category: docs
|
|
---
|
|
|
|
*Find all the ways to install YunoHost **[here](/install)**.*
|
|
|
|
[center]
|
|
|
|
|
|
[/center]
|
|
|
|
! Before setting up a server at home, it is recommended that you know the [possible limitations imposed by your ISP](/administrate/advance/isp).
|
|
! If they are too restrictive, you might consider using a VPN to bypass them.
|
|
|
|
## Pre-requisites
|
|
|
|
- A Raspberry Pi 2, 3 or 4 (RPi 0 and 1 may work but require some tweaking... see [this issue](https://github.com/YunoHost/issues/issues/1423));
|
|
- An microSD card: **8GB** capacity (at least) and **Class 10** speed rate are highly recommended (like the [Transcend 300x](http://www.amazon.fr/Transcend-microSDHC-adaptateur-TS32GUSDU1E-Emballage/dp/B00CES44EO)) ;
|
|
- A power supply (either an adapter or a MicroUSB cable);
|
|
- An ethernet cable (RJ-45) to connect your Raspberry Pi to your router. (Raspberry Pi Zero users can connect the Pi using an OTG cable, [Wifi dongle](https://core-electronics.com.au/tutorials/raspberry-pi-zerow-headless-wifi-setup.html).);
|
|
- A [reasonable ISP](/isp), preferably with a good and unlimited upload bandwidth.
|
|
|
|
---
|
|
|
|
## Install with the pre-installed image (recommended)
|
|
|
|
<a class="btn btn-lg btn-default" href="/images">0. Download the pre-installed image for Raspberry Pi</a>
|
|
|
|
<a class="btn btn-lg btn-default" href="/burn_or_copy_iso">1. Flash the SD card with the image</a>
|
|
|
|
<a class="btn btn-lg btn-default" href="/plug_and_boot">2. Boot the board and connect to the web interface at `yunohost.local`</a>
|
|
|
|
<a class="btn btn-lg btn-default" href="/postinstall">3. Proceed with the initial configuration (post-installation)</a>
|
|
|
|
---
|
|
|
|
## Manual installation (advanced users)
|
|
|
|
! We do not recommend the manual installation because it is more technical and longer than using the pre-installed image. This documentation is only intended for advanced users.
|
|
|
|
! The latest Raspberry Pi OS images requires a screen and a keyboard, as it is no longer possible to connect directly to the Raspberry through SSH. Nevertheless it is possible to re-enable SSH at boot: before starting your Raspberry, put in the boot partition of the SD card an empty file named `ssh` (without extension).
|
|
|
|
0. Install Raspberry Pi OS Lite on the SD card ([instructions](https://www.raspberrypi.org/downloads/raspberry-pi-os/)). The Raspberry Pi OS Lite can be found here: https://downloads.raspberrypi.org/raspbian_lite/images/
|
|
|
|
1. Connect to your Raspberry Pi with the user `pi`. Set the root password with
|
|
```bash
|
|
sudo passwd root
|
|
```
|
|
|
|
2. Edit `/etc/ssh/sshd_config` to allow SSH login for root, by replacing `PermitRootLogin without-password` with `PermitRootLogin yes`. Reload the SSH daemon with `service ssh reload`.
|
|
|
|
3. Disconnect and reconnect, this time as root.
|
|
|
|
4. Then follow the <a href="/install_manually">generic manual install procedure</a>.
|
|
|