mirror of
https://github.com/YunoHost/doc.git
synced 2024-09-03 20:06:26 +02:00
92 lines
2.8 KiB
Markdown
92 lines
2.8 KiB
Markdown
# Install YunoHost on a Raspberry Pi
|
|
|
|
*Find other ways to install YunoHost **[here](/install)**.*
|
|
|
|
## Pre-requisite
|
|
<img src="/images/Raspberry_Pi_2_Model_B_v1.1_front_angle_new.jpg" width=350>
|
|
<img src="/images/micro-sd-card.jpg">
|
|
|
|
- A Raspberry Pi model 1, 2 or 3
|
|
- An SD card: **4GB** capacity (or more) and **class10** speed rate is highly recommended
|
|
- An other computer to read this guide and access to your Raspberry Pi
|
|
- A screen and a keyboard are recommended to control your Raspberry Pi if a problem occurs.
|
|
- A [reasonable ISP](/isp), preferably with a good and unlimited upstream bandwidth
|
|
- **YunoHost Raspberry Pi images**, available here:
|
|
|
|
build.yunohost.org
|
|
|
|
There are two ways of installing, depending on if you can start your server from scratch or not.
|
|
|
|
---
|
|
|
|
## Installation using an image
|
|
|
|
<a class="btn btn-lg btn-default" href="/copy_image">1. Copy image to the SD card</a>
|
|
|
|
<a class="btn btn-lg btn-default" href="/plug_and_boot">2. Plug & boot</a>
|
|
|
|
<a class="btn btn-lg btn-default" href="/postinstall">3. Post-install</a>
|
|
|
|
## Manual installation
|
|
|
|
Follow these steps if you can't start from scratch and simply use an image. Note - Yunohost installation is different if you have a Raspberry Pi Zero, be careful!
|
|
|
|
1. Install git
|
|
```bash
|
|
sudo apt-get install git
|
|
```
|
|
|
|
2. Clone the Yunohost install script repository
|
|
```bash
|
|
git clone https://github.com/YunoHost/install_script /tmp/install_script
|
|
```
|
|
|
|
3. The root user must have a password set, if it isn't the case, set it (whithout the install script failed):
|
|
```bash
|
|
sudo passwd root
|
|
```
|
|
|
|
4. Update the Pi:
|
|
```bash
|
|
apt-get update ; apt-get dist-upgrade -y ; apt-get install rpi-update ; rpi-update ; reboot`
|
|
```
|
|
|
|
This will upgrade the Pi, then reboot.
|
|
|
|
<div class="alert alert-info">
|
|
<b>Raspberry Pi Zero users:</b> follow these specific steps for a successfull installation.
|
|
|
|
</div>
|
|
|
|
0.1 Install metronome manually:
|
|
```bash
|
|
apt-get install -y ssl-cert lua-event lua-expat lua-socket lua-sec lua-filesystem
|
|
wget https://github.com/YunoHost/metronome/archive/debian/3.7.9+33b7572-1.zip
|
|
unzip 3.7.9+33b7572-1.zip
|
|
cd metronome-debian-3.7.9-33b7572-1
|
|
dpkg-buildpackage -rfakeroot -uc -b -d
|
|
cd ..
|
|
dpkg -i metronome_3.7.9+33b7572-1_armhf.deb
|
|
apt-mark hold metronome
|
|
```
|
|
|
|
4. Execute the installation script
|
|
```bash
|
|
cd /tmp/install_script && sudo ./install_yunohost
|
|
```
|
|
---
|
|
|
|
### Recommended after post-installation
|
|
|
|
* Connect via SSH: **root@IP.OF.RPI** (password: **yunohost**)
|
|
* Change root password: `passwd root`
|
|
* Upgrade system: `apt-get update && apt-get dist-upgrade && rpi-update`
|
|
* Configure the language, keyboard layout and timezone with the **raspi-config** tool
|
|
|
|
---
|
|
|
|
#### Build image
|
|
* [Create a Raspberry Pi image](/build_arm_image_en)
|
|
|
|
***If you need help during one of these steps, do not hesitate to use [our support tools](/support).***
|
|
|