mirror of
https://github.com/YunoHost/doc.git
synced 2024-09-03 20:06:26 +02:00
86 lines
3.5 KiB
Markdown
86 lines
3.5 KiB
Markdown
---
|
|
title: Pi-hole
|
|
template: docs
|
|
taxonomy:
|
|
category: docs, apps
|
|
routes:
|
|
default: '/app_pihole'
|
|
---
|
|
|
|
|
|
|
|
[](https://install-app.yunohost.org/?app=pihole) [](https://dash.yunohost.org/appci/app/pihole)
|
|
|
|
### Index
|
|
|
|
- [Using Pi-hole as a DHCP server](#using-pi-hole-as-a-dhcp-server)
|
|
- [Configure Pi-hole](#configure-pi-hole)
|
|
- [Configure my router](#configure-my-router)
|
|
- [Restore Network](#restore-network)
|
|
- [Useful links](#useful-links)
|
|
|
|
*Pi-hole* is a network-level ad blocker that acts as a DNS layer and possibly a DHCP3 server for use on a private network. It is designed to be installed on embedded devices with network capabilities, such as the Raspberry Pi, but can be used on other machines running GNU/Linux or in virtualised environments.
|
|
|
|
## Using Pi-hole as a DHCP server
|
|
|
|
> **Warning, you should be aware that touching your DHCP could break your network.
|
|
In case your server is inaccessible, you will lose your dns resolution and IP address.
|
|
Thus, you would lose any connection to the internet and even the connection to your router.**
|
|
|
|
> If you encounter this kind of problem, please read the section "How to restore my network".
|
|
|
|
### Configure Pi-hole
|
|
|
|
There are 2 ways to configure Pi-hole to be used as your DHCP server.
|
|
- Either you can choose to use it when you install the application.
|
|
- Or you can activate the DHCP server afterwards in the "Settings" tab, part "Pi-hole DHCP Server".
|
|
In this second case, it may be preferable to force the server IP to a static address.
|
|
|
|
### Configure my router
|
|
|
|
Your router or your ISP's router has a DHCP server enabled by default.
|
|
If you keep this DHCP, along with Pi-hole's, you will have transparent conflicts between them.
|
|
The first DHCP server to respond will distribute its own IP and settings.
|
|
So you need to turn off your router's DHCP server and let Pi-hole manage your network.
|
|
|
|
#### Why should I use Pi-hole's DHCP?
|
|
|
|
By using Pi-hole's DHCP, you allow Pi-hole to give its dns configuration to each of your clients. This way, every request will be filtered by Pi-hole.
|
|
|
|
Another case of using Pi-hole DHCP is if you have hairpinning problems (you can't connect to your server because its IP is your public IP, and your router doesn't allow this).
|
|
In this case, using Pi-hole's dns will allow you to connect to your server by its local address rather than its public address.
|
|
|
|
### Restore network
|
|
|
|
> Oops!
|
|
Your Pi-hole server has crashed, and you don't have DHCP anymore.
|
|
Don't panic. We'll get through this.
|
|
|
|
Use your favorite device on your desktop computer.
|
|
And first, get your network interface (usually `eth0`).
|
|
|
|
```bash
|
|
sudo ifconfig
|
|
```
|
|
|
|
Then change your IP to a static one.
|
|
|
|
```bash
|
|
sudo ifconfig eth0 192.168.1.100
|
|
```
|
|
|
|
Now you can connect to your router and reboot its DHCP server to use it again.
|
|
You can now remove your static IP and get a dynamic IP again.
|
|
|
|
```bash
|
|
sudo ifconfig eth0 0.0.0 && sudo dhclient eth0
|
|
```
|
|
|
|
> Remember to turn off your router's DHCP if your server is running again.
|
|
|
|
## Useful links
|
|
|
|
+ Website: [pi-hole.net](https://pi-hole.net)
|
|
+ Official documentation: [docs.pi-hole.net](https://docs.pi-hole.net/)
|
|
+ Application software repository: [github.com - YunoHost-Apps/pihole](https://github.com/YunoHost-Apps/pihole_ynh)
|
|
+ Fix a bug or an improvement by creating a ticket (issue): [github.com - YunoHost-Apps/pihole/issues](https://github.com/YunoHost-Apps/pihole_ynh/issues)
|